Thermal Stability of Metal-Organic Frameworks and Encapsulation of CuO Nanocrystals for Highly Active Catalysis

Crystal Clear: Metal-Organic Frameworks Pioneering the Path to Future Drug Detox

The growing number of acute drug abuse overdoses demands the development of innovative detoxification strategies for emergency purposes. In this study, an innovative approach for the application of porous Zr-based metal-organic frameworks for the treatment of acute overdoses of popular drugs of abuse including amphetamine, methamphetamine, cocaine, and MDMA is presented. A comprehensive approach determining the efficacy and the kinetics of drug removal, considering dosage, adsorption time, and adsorption mechanisms, was tested and corroborated with density functional theory (DFT) modeling. The experimental results showed high removal efficiency reaching up to 90% in the case of the application of the NU-1000 metal-organic framework. The difference Raman spectroscopy method presented in this study corroborated with DFT-based vibrational analysis allows the detection of drug adsorbed in the MOF framework even with as low a concentration as 5 mg/g. Additionally, the drug adsorption mechanisms were modeled with DFT, showing the π-π stacking in a vast majority of considered cases. The performance and influence on the living organisms were evaluated throughout the in vitro and in vivo experiments, indicating that Zr-based MOFs could serve as efficient, organic, safe drug adsorbents.

Crystallization Regulation Engineering in the Carbon Nitride Nanoflower for Strong and Stable Electrochemiluminescence

Cathode electrochemiluminescence (ECL) of C₃N₄ material has suffered from weak and unstable ECL emission for a long time, which greatly limits its practical application. Herein, a novel approach was developed to improve the ECL performance by regulating the crystallinity of the C₃N₄ nanoflower for the first time. The high-crystalline C₃N₄ nanoflower achieved a pretty strong ECL signal as well as excellent long-term stability compared to low-crystalline C₃N₄ when K₂S₂O₈ was used as a co-reactant. Through the investigation, it is found that the enhanced ECL signal is attributed to the simultaneous inhibition of K₂S₂O₈ catalytic reduction and enhancement of C₃N₄ reduction in the high-crystalline C₃N₄ nanoflower, which can provide more opportunities for SO₄^• - to react with electro-reduced C₃N₄^• -, and a new "activity passivation ECL mechanism" was proposed, while the improvement of the stability is mainly ascribed to the long-range ordered atomic arrangements caused by structure stability in the high-crystalline C₃N₄ nanoflower. As a benefit from the excellent ECL emission and stability of high-crystalline C₃N₄, the C₃N₄ nanoflower/K₂S₂O₈ system was employed as a Cu²⁺ detection sensing platform, which exhibited high sensitivity, excellent stability, and good selectivity with a wide linear range from 6 nM to 10 μM and a low detection limit of 1.8 nM.

Ultrahigh Metal Content Carbon-Based Catalyst for Efficient Hydrogenation of Furfural: The Regulatory Effect of Glycerol

The development of high-content non-noble metal nanocatalysts is important for multiphase catalysis applications. However, it is a challenge to solve the agglomeration in the preparation of high-content metal catalysts. In this paper, a carbon-based catalyst (Co@CN-G-600) with 71.28 wt % cobalt metal content was prepared using a new strategy of gas-phase carbon coating assisted by glycerol. The core of this strategy is to maintain the spacing of metallic cobalt by continuous replenishment of dissociated ligands during pyrolysis over gas-phase glycerol. This approach is also applicable to other non-noble metals. When Co@CN-G-600 was further used as a catalyst for the selective hydrogenation of furfural (FF) to prepare furfuryl alcohol (FOL), the yield of FOL was >99.9% under mild conditions of 80 °C, compared to only 8.23% catalytic yield at up to 130 °C for Co@CN-600 without glycerol. The excellent catalytic performance mainly lies in the fact that the introduction of glycerol modulates the size effect, electronic effect, and acidic site intensity of the high-content Co catalyst, which promotes the activation of FF and hydrogen. Meanwhile, the optimized specific surface area and pore structure by glycerol improve the accessibility of high-density active sites and promote more efficient mass transfer. In addition, the introduction of glycerol produced a graphitic carbon layer encapsulation structure relative to Co@CN-600, which substantially improved the cycling stability of the catalyst. This study resolves the paradox of high content and high dispersion of non-noble metal catalysts in the synthesis process and provides a general pathway and example for the preparation of stable high-content metal catalysts.

In Situ Growth of a Stable Metal-Organic Framework (MOF) on Flexible Fabric via a Layer-by-Layer Strategy for Versatile Applications

Fabrics have been used broadly in daily life for an enormous variety of applications due to their intrinsic advantages, such as flexibility, renewability, and good processability. Integrating natural fabrics with metal-organic frameworks (MOFs) is an effective strategy to improve the added value of textiles with special functionalities. Here, a facile, low-cost, and scalable technology is reported for the in situ growth of MOFs on cotton fabrics. A uniform and dense coating of regular octahedral Cu-1,3,5-benzenetricarboxylic acid (CuBTC) crystals was formed on the fiber surface, followed by treatment with 1H,1H,2H,2H-perfluorooctyltriethoxysilane and triethoxyoctylsilane to create a superhydrophobic CuBTC@cotton fabric (SMCF), which greatly improved its water stability and extended superhydrophobic CuBTC's potential applications. The as-prepared MCF has a specific surface area of 229 m²/g, which is 11 times that of pristine fabrics (21 m²/g). This high porosity further endows the fabric with enhanced loading capacity of essential oils to enable excellent antibacterial ability. Moreover, the SMCF also exhibits excellent self-cleaning, UV shielding, and anti-icing performances. In addition, we performed COMSOL simulations to investigate the dynamic freezing process of water on the surface of samples, which agrees well with our experimental observations. By combining the merits of both fabrics and MOFs, the MCF is expected to extend the applications of traditional textiles in antifouling, safety, the fragrance industry, and healthcare for the next-generation multifunctional fabrics.

Understanding Solvothermal Growth of Metal-Organic Framework Colloids for CO2 Capture Applications

A quantitative study of the synthesis of metal-organic framework (MOF) colloids via a solvothermal growth process was demonstrated using electrospray-differential mobility analysis (ES-DMA), a gas-phase electrophoresis approach. HKUST-1, a copper-based MOF (Cu-MOF), was selected as the representative MOF of the study. The effects of the synthetic parameters, including ligand concentration (C_BTC), synthetic temperature (T_s), and synthetic time (t_s) versus material properties of the Cu-MOF, were successfully characterized based on the mobility size distributions measured by ES-DMA. The results show that the mobility size of Cu-MOF was proportional to T_s, t_s, and C_BTC during the solvothermal growth. X-ray diffraction and Brunauer-Emmett-Teller analyses were employed complementarily to the ES-DMA, confirming that the increase in mobility size of Cu-MOF was correlated to the increase in crystallinity (i.e., larger specific surface area and crystallite size). The results of CO₂ pulse adsorption show that the synthesized Cu-MOF possessed a good CO₂ adsorption ability under 1 atm, 35 °C, and the cumulative amount of CO₂ uptake was proportional to the measured mobility size of Cu-MOF. The work provides a proof of concept for the controlled synthesis of MOF colloids with the support of gas-phase electrophoretic analysis, and the quantitative methodology is useful for the development of MOF-based applications in CO₂ capture and utilization.

Fabricated Metal-Organic Frameworks (MOFs) as luminescent and electrochemical biosensors for cancer biomarkers detection

In the health domain, a major challenge is the detection of diseases using rapid and cost-effective techniques. Most of the existing cancer detection methods show poor sensitivity and selectivity and are time consuming with high cost. To overcome this challenge, we analyzed porous fabricated metal-organic frameworks (MOFs) that have better structures and porosities for enhanced biomarker sensing. Here, we summarize the use of fabricated MOF luminescence and electrochemical sensors in devices for cancer biomarker detection. Various strategies of fabrication and the role of fabricated materials in sensing cancer biomarkers have been studied and described. The structural properties, sensing mechanisms, roles of noncovalent interactions, limits of detection, modeling, advantages, and limitations of MOF sensors have been well-discussed. The study presents an innovative technique to detect the cancer biomarkers by the use of luminescence and electrochemical MOF sensors. In addition, the potential association studies have been opening the way for personalized patient treatments and the development of new cancer-detecting devices.

Thermal degradation of defective high-surface-area UiO-66 in different gaseous environments

UiO-66 is a versatile zirconium-based MOF, which is thermally stable up to 500 °C. In the present work, the thermal degradation of UiO-66 with a high number of defects has been studied in inert, oxidative and reductive environments. A sample of UiO-66 with a high BET surface area of 1827 m² g^-1 was prepared, which contains 2.3 missing linkers per hexa-zirconium node, as calculated by the thermogravimetric curve. The crystalline framework of this UiO-66 sample collapses at 250 °C, while thermal decomposition starts at 450 °C in the oxidative environment and at 500 °C in the reductive and inert environments. The BET surface area of the MOF is affected variably by heating under different gaseous conditions. Under inert conditions, porosity is maintained up to 711 m² g^-1, which is quite high when compared to that under reductive (527 m² g^-1) or oxidative (489 m² g^-1) conditions. Upon complete thermal decomposition at 600 °C, the MOF produces predominantly tetragonal zirconia. TEM images of the thermally decomposed samples show that the shape of the original MOF crystal is maintained during the heating process in the inert and reductive environments, whereas under oxidative conditions, all of the carbon is burnt to carbon dioxide, leaving no carbon matrix as the support.

Preparation of Ni-microsphere and Cu-MOF using aspartic acid as coordinating ligand and study of their catalytic properties in Stille and sulfoxidation reactions

In this study, the thermal and catalytic behavior of Ni-microsphere and Cu-MOF were investigated with aspartic acid as the coordinating ligand with different morphologies. The Ni-microsphere and Cu-MOF with aspartic acid, as the coordinating ligand, were prepared via a solvothermal method. The morphology and porosity of the obtained Ni microsphere and Cu-MOF were characterized by XRD, FTIR, TGA, DSC, BET and SEM techniques. The catalytic activity of the Ni-microsphere and Cu-MOF was examined in Stille and sulfoxidation reactions. The Ni microsphere and Cu-MOF were easily isolated from the reaction mixtures by simple filtration and then recycled four times without any reduction of catalytic efficiency.

A Gadolinium Metal-Organic Framework Film as a Converter Layer for Neutron Detection

Metal-organic frameworks (MOFs) are known for their versatility in terms of their crystalline structure, porosity, resistance to temperature, radiation damage, and luminescence among others. Gadolinium (Gd) is one of the elements with the highest reported cross-section for low energy neutron capture, producing internal conversion electrons and γ rays as a result of the neutron absorption. The development of Gd-BTC films (BTC=1,3,5-benzenetricarboxylate) is shown that were deposited on Si and Al substrates by airbrushing, and characterized by profilometry, Raman, EDX and X-ray diffraction. Radiation damage, thermal decomposition and neutron absorption of these films were studied as well. Gd-BTC films were attached to CMOS devices (Complementary Metal-Oxide-Semiconductor), which are sensible to the internal conversion electrons, in order to build a neutron detector. The devices Gd-BTC/CMOS could selectively detect neutrons in the presence of γ rays with a thermal neutron detection efficiency of 3.3±0.1 %, a signal to noise ratio of 6 : 1, and were suitable to obtain images.

Destruction of Metal-Organic Frameworks: Positive and Negative Aspects of Stability and Lability

Metal-organic frameworks (MOFs), constructed from organic linkers and inorganic building blocks, are well-known for their high crystallinity, high surface areas, and high component tunability. The stability of MOFs is a key prerequisite for their potential practical applications in areas including storage, separation, catalysis, and biomedicine since it is essential to guarantee the framework integrity during utilization. However, MOFs are prone to destruction under external stimuli, considerably hampering their commercialization. In this Review, we provide an overview of the situations where MOFs undergo destruction due to external stimuli such as chemical, thermal, photolytic, radiolytic, electronic, and mechanical factors and offer guidelines to avoid unwanted degradation happened to the framework. Furthermore, we discuss possible destruction mechanisms and their varying derived products. In particular, we highlight cases that utilize MOF instability to fabricate varying materials including hierarchically porous MOFs, monolayer MOF nanosheets, amorphous MOF liquids and glasses, polymers, metal nanoparticles, metal carbide nanoparticles, and carbon materials. Finally, we provide a perspective on the utilization of MOF destruction to develop advanced materials with a superior hierarchy for various applications.

Bimetallic Metal-Organic Framework-Derived Hybrid Nanostructures as High-Performance Catalysts for Methane Dry Reforming

Syngas, consisting of equimolar CO and H₂, is an important feedstock for large-scale production of a wide range of commodity chemicals including aldehyde, methanol, ammonia, and other oxygenated chemicals. Dry reforming of methane (DRM), proceeding by reacting greenhouse gases, CO₂ and CH₄, at high temperatures in the presence of a metal catalyst, is considered one of the most environmentally friendly routes for syngas production. Nevertheless, nonprecious metal-based catalysts, which can operate at relatively low temperatures for high product yields and selectivities, are required to drive the DRM process for industrial applications effectively. Here, we developed NiCo@C nanocomposites from a corresponding NiCo-based bimetallic metal-organic framework (MOF) to serve as high-performance catalysts for the DRM process, achieving high turnover frequencies (TOF) at low temperatures (>5.7 s^-1 at 600 °C) and high product selectivities (H₂/CO = 0.9 at 700 °C). The incorporation of Co in Ni catalysts improves the operation stability and light-off stability. The present development for MOF-derived nanocomposites opens a new horizon for design of DRM catalysts.

Isolating reactive metal-based species in Metal-Organic Frameworks - viable strategies and opportunities

Structural insight into reactive species can be achieved via strategies such as matrix isolation in frozen glasses, whereby species are kinetically trapped, or by confinement within the cavities of host molecules. More recently, Metal-Organic Frameworks (MOFs) have been used as molecular scaffolds to isolate reactive metal-based species within their ordered pore networks. These studies have uncovered new reactivity, allowed observation of novel metal-based complexes and clusters, and elucidated the nature of metal-centred reactions responsible for catalysis. This perspective considers strategies by which metal species can be introduced into MOFs and highlights some of the advantages and limitations of each approach. Furthermore, the growing body of work whereby reactive species can be isolated and structurally characterised within a MOF matrix will be reviewed, including discussion of salient examples and the provision of useful guidelines for the design of new systems. Novel approaches that facilitate detailed structural analysis of reactive chemical moieties are of considerable interest as the knowledge garnered underpins our understanding of reactivity and thus guides the synthesis of materials with unprecedented functionality.

BTEX Vapor Detection with a Flexible MOF and Functional Polymer by Means of a Composite Photonic Crystal

Owing to superior sorption properties, structural variability, and versatility, metal-organic frameworks (MOFs) are used as sensing materials with both high selectivity and sensitivity. Herein, integrating a MOF with a polymer, a multilayered photonic crystal (PC) sensor, which is composed of NH₂-MIL-88B nanocrystals and poly(styrene-acrylic acid) nanoparticles, is fabricated. Synthetically, by taking advantage of the sensitive breathing effect of the MOF and excellent stimuli-response of the copolymer, the sensor outputs significant optical signals that can be visually recognized and captured with the assistance of the spectrum with the detection limits of 3.70, 0.87, 0.42, and 0.22 g/m³ when exposed to benzene, toluene, ethylbenzene, and xylene (BTEX), respectively. Thanks to the porous construction and ultrathin feature, the PC sensor reaches a sensing balance within 3 s in BTEX streams and restores its initial state immediately after the rapid volatilization of the vapors. The function of the MOF material is confirmed by comparing the sensing properties of MOF/polymer PC with those of the SiO₂/polymer one. In addition, as the designed MOF/polymer-based PC sensor shows different spectrum characteristics compared with those of other reported MOF-based ones, finite element simulation technology is adopted to help explain the relationship between optical property and material structure feature of the multilayered PC structure.

Metal-Organic Framework-Based Sustainable Nanocatalysts for CO Oxidation

The development of new catalytic nanomaterials following sustainability criteria both in their composition and in their synthesis process is a topic of great current interest. The purpose of this work was to investigate the preparation of nanocatalysts derived from the zirconium metal–organic framework UiO-66 obtained under friendly conditions and supporting dispersed species of non-noble transition elements such as Cu, Co, and Fe, incorporated through a simple incipient wetness impregnation technique. The physicochemical properties of the synthesized solids were studied through several characterization techniques and then they were investigated in reactions of relevance for environmental pollution control, such as the oxidation of carbon monoxide in air and in hydrogen-rich streams (COProx). By controlling the atmospheres and pretreatment temperatures, it was possible to obtain active catalysts for the reactions under study, consisting of Cu-based UiO-66-, bimetallic CuCo–UiO-66-, and CuFe–UiO-6-derived materials. These solids represent new alternatives of nanostructured catalysts based on highly dispersed non-noble active metals.

Silver Nanoparticles-Decorating Manganese Oxide Hybrid Nanostructures for Supercapacitor Applications

A facile aerosol-based synthetic approach is demonstrated for the fabrication of silver-manganese oxide (Ag-MnO_x) and cetyltrimethylammonium bromide (CTAB)-templated silver-manganese oxide (c-Ag-MnO_x) hybrid nanostructures as the positive electrode materials of supercapacitors. Through gas-phase evaporation-induced self-assembly, silver nanoparticles are homogeneously decorated in the hybrid nanostructure to create a conductive path at the interface of the cluster of MnO_x crystallites. The utilization of the capacitance of MnO_x increases by the addition of Ag nanoparticles (>2 times for Ag-MnO_x and ∼1.7 times for c-Ag-MnO_x). An optimal specific capacitance is achieved when the concentration of the silver precursor (C_Ag) is 0.5 wt %, 118 F g^-1 for Ag-MnO_x, and 154 F g^-1 for c-Ag-MnO_x at a specific current of 1 A g^-1. The enhanced supercapacitive performance by the addition of CTAB at low C_Ag is attributed to the increased surface area (>19.4%) for electrochemical reactions. The prototype method with mechanistic understanding demonstrated in this study shows promise for the fabrication of a variety of MnO_x-based hybrid nanostructures for supercapacitor applications.

Metal-Organic Frameworks Encapsulating Active Nanoparticles as Emerging Composites for Catalysis: Recent Progress and Perspectives

Beyond conventional porous materials, metal-organic frameworks (MOFs) have aroused great interest in the construction of nanocatalysts with the characteristics of catalytically active nanoparticles (NPs) confined into the cavities/channels of MOFs or surrounded by MOFs. The advantages of adopting MOFs as the encapsulating matrix are multifold: uniform and long-range ordered cavities can effectively promote the mass transfer and diffusion of substrates and products, while the diverse metal nodes and tunable organic linkers may enable outstanding synergy functions with the encapsulated active NPs. Herein, some key issues related to MOFs for catalysis are discussed. Then, state-of-the art progress in the encapsulation of catalytically active NPs by MOFs as well as their synergy functions for enhanced catalytic performance in the fields of thermo-, photo-, and electrocatalysis are summarized. Notably, encapsulation-structured nanocatalysts exhibit distinct advantages over conventional supported catalysts, especially in terms of the catalytic selectivity and stability. Finally, challenges and future developments in MOF-based encapsulation-structured nanocatalysts are proposed. The aim is to deliver better insight into the design of well-defined nanocatalysts with atomically accurate structures and high performance in challenging reactions.

Copper based coordination polymers based on metalloligands: utilization as heterogeneous oxidation catalysts

This work presents two copper-based coordination polymers and their utilization as stable, reusable and heterogeneous catalysts for the epoxidation of olefins using O₂ and for peroxide-mediated oxidation of benzyl alcohols under solvent-free conditions.