Smartphone-Based VOC Sensor Using Colorimetric Polydiacetylenes

Colorimetric core/shell ZIF-8/PEO/PDA nanofibers for detection of fish spoilage

Here, colorimetric nanofibers (NFs) based on polydiacetylene (PDA), zeolitic imidazolate framework-8 (ZIF-8), and poly(ethylene) oxide (PEO) were developed. First, the successful synthesis of ZIF-8 was illustrated with structural and morphological analysis. Next, shell/core PDA/PEO/ZIF-8 NFs, namely PPZ0, PPZ5, PPZ15, and PPZ25, were fabricated by coaxial electrospinning at various ZIF-8 concentrations in the core. PPZ5 NFs exhibited a 63 % increase in tensile strength while PPZ25 NFs showed the highest thermal resistance. PPZ15 NFs with the best physicochemical and colorimetric properties were selected to evaluate food spoilage. The change in color difference values of PPZ15 NFs was correlated well with total viable count (TVC) and total volatile basic nitrogenous (TVB-N) in fish samples during chilled storage, reaching TVC to 6.69 log CFU/g, and TVB-N to 33.13 mg N/100 g on day 6. Ultimately, the PPZ15 NFs were successfully utilized to provide a real-time, quantitative assessment of fish freshness.

Smartphones as a platform for molecular analysis: concepts, methods, devices and future potential

Over the past 15 years, smartphones have had a transformative effect on everyday life. These devices also have the potential to transform molecular analysis over the next 15 years. The cameras of a smartphone, and its many additional onboard features, support optical detection and other aspects of engineering an analytical device. This article reviews the development of smartphones as platforms for portable chemical and biological analysis. It is equal parts conceptual overview, technical tutorial, critical summary of the state of the art, and outlook on how to advance smartphones as a tool for analysis. It further discusses the motivations for adopting smartphones as a portable platform, summarizes their enabling features and relevant optical detection methods, then highlights complementary technologies and materials such as 3D printing, microfluidics, optoelectronics, microelectronics, and nanoparticles. The broad scope of research and key advances from the past 7 years are reviewed as a prelude to a perspective on the challenges and opportunities for translating smartphone-based lab-on-a-chip devices from prototypes to authentic applications in health, food and water safety, environmental monitoring, and beyond. The convergence of smartphones with smart assays and smart apps powered by machine learning and artificial intelligence holds immense promise for realizing a future for molecular analysis that is powerful, versatile, democratized, and no longer just the stuff of science fiction.

Optofluidic paper-based analytical device for discriminative detection of organic substances via digital color coding

Developing a portable yet affordable method for the discrimination of chemical substances with good sensitivity and selectivity is essential for on-site visual detection of unknown substances. Herein, we propose an optofluidic paper-based analytical device (PAD) that consists of a macromolecule-driven flow (MDF) gate and photonic crystal (PhC) coding units, enabling portable and scalable detection and discrimination of various organic chemical, mimicking the olfactory system. The MDF gate is designed for precise flow control of liquid analytes, which depends on intermolecular interactions between the polymer at the MDF gate and the liquid analytes. Subsequently, the PhC coding unit allows for visualizing the result obtained from the MDF gate and generating differential optical patterns. We fabricate an optofluidic PAD by integrating two coding units into a three-dimensional (3D) microfluidic paper within a 3D-printed cartridge. The optofluidic PADs clearly distinguish 11 organic chemicals with digital readout of pattern recognition from colorimetric signals. We believe that our optofluidic coding strategy mimicking the olfactory system opens up a wide range of potential applications in colorimetric monitoring of chemicals observed in environment.

Smartphone-based detection and discrimination of amine vapors by a single dye-adsorbed material

Smartphone-assisted analysis has become widely utilized for detecting various species in recent years. In such studies, multiple dyes should be employed to ensure selectivity and analyte discrimination. In our research, we have demonstrated the capability of a specially synthesized dye to selectively detect and discriminate liquid amine vapors. The developed material employs meso-toluene-α,β,α',β'-tetrabromoBODIPY immobilized on a thin-layer chromatography plate, exhibiting structure-specific color changes in response to amine vapors. The hue values of these colors, observed under both ambient and UV light, enable discrimination even among closely related amine structures. A mobile application has also been developed for the rapid interpretation of test results.

Cooperative β-sheet coassembly controls intermolecular orientation of amphiphilic peptide-polydiacetylene conjugates

In this work, we elucidated the structural organization of stimuli-responsive peptide-polydiacetylene (PDA) conjugates that can self-assemble as 1D nanostructures under neutral aqueous conditions. The amino acid sequences bear positively or negatively charged domains at the periphery of the peptide segments to promote solubility in water while also driving assembly of the individual and combined components into β-sheets. The photopolymerization of PDA, as well as the sensitivity of the resulting optical properties of the polymeric material to external stimuli, highly depends on the structural organization of the assembly of amphiphilic peptide-diacetylene units into 1D-nanostructures. Solid-state NMR measurements on 13C-labeled and 15N-labeled samples show that positively charged and negatively charged peptide amphiphiles are each capable of self-assembly, but self-assembly favors antiparallel β-sheet structure. When positively and negatively charged peptide amphiphiles interact in stoichiometric solutions, cooperative coassembly dominates over self-assembly, resulting in the desired parallel β-sheet structure with a concomitant increase in structural order. These results reveal that rational placement of oppositely charged residues can control β-strand organization in a peptide amphiphile coassembly, which would have implications on the adaptive properties of stimuli-responsive biomaterials such as the peptide-PDAs studied here.

Innovative Wearable Sweat Sensor Array for Real-Time Volatile Organic Compound Detection in Noninvasive Diabetes Monitoring

Wearable sweat sensors are reshaping healthcare monitoring, providing real-time data on hydration and electrolyte levels with user-friendly, noninvasive devices. This paper introduces a highly portable two-channel microfluidic device for simultaneous sweat sampling and the real-time detection of volatile organic compound (VOC) biomarkers. This innovative wearable microfluidic system is tailored for monitoring diabetes through the continuous and noninvasive tracking of acetone and ammonia VOCs, and it seamlessly integrates with smartphones for easy data management. The core of this system lies in the utilization of carbon polymer dots (CPDs) and carbon dots (CDs) derived from monomers such as catechol, resorcinol, o-phenylenediamine, urea, and citric acid. These dots are seamlessly integrated into hydrogels made from gelatin and poly(vinyl alcohol), resulting in an advanced solid-state fluorometric sensor coating on a cellulose paper substrate. These sensors exhibit exceptional performance, offering linear detection ranges of 0.05-0.15 ppm for acetone and 0.25-0.37 ppm for ammonia, with notably low detection limits of 0.01 and 0.08 ppm, respectively. Rigorous optimization of operational parameters, encompassing the temperature, sample volume, and assay time, has been undertaken to maximize device performance. Furthermore, these sensors demonstrate impressive selectivity, effectively discerning between biologically similar substances and other potential compounds commonly present in sweat. As this field matures, the prospect of cost-effective, continuous, personalized health monitoring through wearable VOC sensors holds significant potential for overcoming barriers to comprehensive medical care in underserved regions. This highlights the transformative capacity of wearable VOC sweat sensing in ensuring equitable access to advanced healthcare diagnostics, particularly in remote or geographically isolated areas.

Kinetics and Mechanism of Liquid-State Polymerization of 2,4-Hexadiyne-1,6-diyl bis-(p-toluenesulfonate) as Studied by Thermal Analysis

A detailed investigation of the liquid-state polymerization of diacetylenes by calorimetric (DSC) and spectroscopic (in situ EPR) thermal analysis techniques is performed. Isoconversional kinetic analysis of the calorimetric data reveals that liquid-state polymerization is governed by a well-defined rate-limiting step as evidenced by a nearly constant isoconversional activation energy. By comparison, solid-state polymerization demonstrates isoconversional activation energy that varies widely, signifying multistep kinetics behavior. Unlike the solid-state reaction that demonstrates an autocatalytic behavior, liquid-state polymerization follows a rather unusual zero-order reaction model as established by both DSC and EPR data. Both techniques have also determined strikingly similar Arrhenius parameters for liquid-state polymerization. Relative to the solid-state process, liquid-state polymerization results in quantitative elimination of the p-toluenesulfonate group and the formation of p-toluenesulfonic acid and a polymeric product of markedly different chemical and phase composition.

Micro- and nanosystems for the detection of hemorrhagic fever viruses

Hemorrhagic fever viruses (HFVs) are virulent pathogens that can cause severe and often fatal illnesses in humans. Timely and accurate detection of HFVs is critical for effective disease management and prevention. In recent years, micro- and nano-technologies have emerged as promising approaches for the detection of HFVs. This paper provides an overview of the current state-of-the-art systems for micro- and nano-scale approaches to detect HFVs. It covers various aspects of these technologies, including the principles behind their sensing assays, as well as the different types of diagnostic strategies that have been developed. This paper also explores future possibilities of employing micro- and nano-systems for the development of HFV diagnostic tools that meet the practical demands of clinical settings.

Wearable Device for Cumulative Chlorobenzene Detection and Accessible Mitigation Strategies

Chronic exposure to low concentrations of volatile organic compounds (VOCs), such as chlorobenzene, is not being monitored in industrializing countries, although VOC exposure is associated with carcinogenic, organ-toxic, and endocrine-disrupting effects. Current VOC-sensing technologies are inaccessible due to high cost, size, and maintenance or are ineffective due to poor sensitivity or reliability. In particular, marginalized individuals face barriers to traditional prescription VOC treatments due to cost, lack of transportation, and limited access to physicians; thus, alternative treatments are needed. Here, we created a novel cumulative wearable color-changing VOC sensor with a paper-based polydiacetylene sensor array for chlorobenzene. With a single smartphone picture, the sensor displays 14 days of logged chlorobenzene exposure data, interpreted by machine-learning (ML) techniques, including principal component analysis. Further, we explored the efficacy of affordable and accessible treatment options to mitigate a VOC's toxic effects. Vitamin D and sulforaphane are naturally found in cruciferous vegetables, like broccoli, and can be used to treat chlorobenzene-mediated bone degradation. Our platform combines these components into a smartphone app that photographs the sensor's colorimetric data, analyzes the data via ML techniques, and offers accessible treatments based on exposure data.

Polymerization of tetrazine-substituted diacetylenes as aggregates in suspension

Polydiacetylenes (PDAs) are conjugated polymers that have been widely exploited for their chromogenic and fluorogenic transitions upon exposure to external stimuli and biomolecules of interest. Herein, we propose a comparative study of the polymerization dynamics of two diacetylene derivatives, TzDA1 and TzDA2, in the form of aggregates in suspension prepared by reprecipitation method from organic solvents in water, varying the diacetylene concentration and solvent proportions, and sonication in water, varying the time and temperature. Both derivatives bear a tetrazine fluorophore, which serves both to increase the fluorescence quantum yield of the system and to track the polymerization by fluorescence quenching exclusively by the blue-PDA, and differ by the chain termination. It was shown that adding a butyl ester function in TzDA2 to a simple urethane (TzDA1) influences the polymerizability and kinetics of polymerization of the aggregates in suspension. In addition, we showed that also the preparation method and preparation conditions do have an influence on the polymerization dynamics, suggesting that a careful study of these properties should be carried out before investigating the applications of such objects.

Reversible colorimetric sensing of volatile analytes by wicking in close proximity to a photonic film

Isolation of volatile analytes from environmental or biological fluids is a rate-determining step that can delay the response time for continuous sensing. In this paper, we demonstrate a colorimetric sensing system that enables the rapid detection of gas-phase analytes released from a flowing micro-volume fluid sample. The sensor platform is an analyte-responsive metal-insulator-metal (MIM) thin-film structure integrated with a large area quartz micropillar array. This allows precise planar alignment and microscale separation (310 μm) of the optical and fluidic structures. This configuration offers rapid and homogeneous color changes over large areas that permits detection by low-resolution optics or eye, which is well-suited to portable/wearable devices. For our proof-of-principle demonstration, we utilized a poly(methyl methacrylate) (PMMA) spacer and evaluated the sensor's response (color change) to ethanol vapor. We show that the RGB color value is quantitatively linked to the spacer swelling, which is reversible and repeatable. The optofluidic platform reduces the sensor response time from minutes to seconds compared with experiments using a conventional chamber. The sensor's concentration-dependent response was examined, confirming the potential of the reported sensing platform for continuous, compact, and quantitative colorimetric analysis of volatile analytes in low-volume samples, such as biofluids.

Fabrication of High-Performance Colorimetric Membrane by Incorporation of Polydiacetylene into Polyarylene Ether Nitriles Electrospinning Nanofibrous Membranes

Polyarylene ether nitrile (PEN) is a novel high-performance engineering plastic with various applications, particularly in thermoresistance-required fields. In this study, a well-known stimuli-response polydiacetylene monomer, 10, 12-pentacosadiynoic acid (PCDA), was encapsulated within electrospun PEN nanofibers to fabricate a colorimetric membrane with satisfactory thermal and corrosion resistance. To optimize the compatibility with PCDA, two PENswith distinct molecular chains were utilized: PEN−PPL and PEN−BPA. The chemical structure and elemental mapping analysis revealed that the PCDA component was successfully incorporated into the PEN fibrous. The PCDA bound significantly better to the PEN−PPL than to the PEN−BPA; due to the carboxyl groups present on the side chains of PEN−PPL, the surface was smooth and the color changed uniformly as the temperature rose. However, owing to its poor compatibility with PEN−BPA, the PCDA formed agglomerations on the fibers. The thermal analysis demonstrated that the membranes obtained after PCDA compounding maintained their excellent heat resistance. The 5% weight loss temperatures of composite nanofibrous membranes manufactured by PEN−PPL and PEN−BPA were 402 °C and 506 °C, respectively, and their glass transition temperatures were 219 °C and 169 °C, respectively, indicating that the blended membranes can withstand high temperatures. The evaluation of application performance revealed that the composite membranes exhibited good dimensional stability upon high thermal and corrosive situations. Specifically, the PEN−P−PCDA did not shrink at 170 °C. Both composite membranes were dimensionally stable when exposed to the alkali aqueous solution. However, PEN−P−PCDA is more sensitive to OH−, exhibiting color transition at pH > 8, whereas PEN−B−PCDA exhibited color transition at high OH− concentrations (pH ≥ 13), with enhanced alkali resistance stability owing to its nanofibrous architecture. This exploratory study reveals the feasibility of PEN nanofibers functionalized using PCDA as a desirable stimulus-response sensor even in high-temperature and corrosive harsh environments.

The Application of In Situ Methods to Monitor VOC Concentrations in Urban Areas—A Bibliometric Analysis and Measuring Solution Review

Urbanisation development affects urban vegetation both directly and indirectly. Since this process usually involves a dramatic change in land use, it is seen as likely to cause ecological pressure on local ecosystems. All forms of human activity, including urbanisation of areas close to residential buildings, significantly impact air quality. This study aims to identify and characterise different measurement solutions of VOCs, allowing the quantification of total and selective compounds in a direct at source (in situ) manner. Portable devices for direct testing can generally be divided into detectors, chromatographs, and electronic noses. They differ in parameters such as operating principle, sensitivity, measurement range, response time, and selectivity. Direct research allows us to obtain measurement results in a short time, which is essential from the point of view of immediate reaction in the case of high concentrations of tested compounds and the possibility of ensuring the well-being of people. The paper also attempts to compare solutions and devices available on the market and assess their application.

Bifunctional ligand-mediated amplification of polydiacetylene response to biorecognition of diethylstilbestrol for on-site smartphone detection

Polydiacetylene (PDA) is very suited for sensitively detecting large biomolecules, and its unique chromatic properties enable visual read-out. However, application to the selective detection of small molecules remains challenging. Here, bifunctional ligands are studied to amplify the color change of PDA for biorecognition of small molecules for the smartphone-based detection of diethylstilbestrol (DES). PDA is decorated with streptavidin (PDA-SA, blue), and biotin-modified DES (bio-DES) is prepared as a bifunctional ligand to couple with PDA-SA and DES antibody. Since multiple bio-DES can bind to a single SA, then multiple SAs on PDA lead to an increased surface coverage of the vesicle. In samples without DES, PDA-SA-bio-DES-DES antibody complexes will form, leading to a color transition (blue to red); this color transition is greatly amplified by antibody-induced aggregation of the complexes. When DES is present, aggregation is inhibited due to competition for the antibody and PDA-SA-bio-DES retains its blue color. A linear relationship (0.4-1250 ng mL^-1) is found between the colorimetric response and the logarithmic DES concentration, with adequate selectivity, accuracy (82.24-118.64%), and precision (below 8.24%). Finally, a paper-based DES PDA biosensor is developed with visual and smartphone-based detection limits of 10 ng mL^-1 and 0.85 ng mL^-1 in water, respectively.

Quantitative Colorimetric Detection of Dissolved Ammonia Using Polydiacetylene Sensors Enabled by Machine Learning Classifiers

Easy-to-use and on-site detection of dissolved ammonia are essential for managing aquatic ecosystems and aquaculture products since low levels of ammonia can cause serious health risks and harm aquatic life. This work demonstrates quantitative naked eye detection of dissolved ammonia based on polydiacetylene (PDA) sensors with machine learning classifiers. PDA vesicles were assembled from diacetylene monomers through a facile green chemical synthesis which exhibited a blue-to-red color transition upon exposure to dissolved ammonia and was detectable by the naked eye. The quantitative color change was studied by UV-vis spectroscopy, and it was found that the absorption peak at 640 nm gradually decreased, and the absorption peak at 540 nm increased with increasing ammonia concentration. The fabricated PDA sensor exhibited a detection limit of ammonia below 10 ppm with a response time of 20 min. Also, the PDA sensor could be stably operated for up to 60 days by storing in a refrigerator. Furthermore, the quantitative on-site monitoring of dissolved ammonia was investigated using colorimetric images with machine learning classifiers. Using a support vector machine for the machine learning model, the classification of ammonia concentration was possible with a high accuracy of 100 and 95.1% using color RGB images captured by a scanner and a smartphone, respectively. These results indicate that using the developed PDA sensor, a simple naked eye detection for dissolved ammonia is possible with higher accuracy and on-site detection enabled by the smartphone and machine learning processes.

Phone Camera Nano-Biosensor Using Mighty Sensitive Transparent Reusable Upconversion Paper

Lycopene, a natural colorant and antioxidant with a huge growing market, is highly susceptible to photo/thermal degradation, which demands real-time sensors. Hence, here a transparent upconversion nanoparticles (UCNPs) strip having 30 mol % Yb, 0.1 mol % Tm, and β-NaYF4 UCNPs, which shows an intense emission at 475 nm, has been developed. This strip has been found to be sensitive to lycopene with a detection limit as low as 10 nM using a smartphone camera, which is due to static quenching that is confirmed by the lifetime study. In comparison to previous paper strips, here the transparent strip has minimal scattering with maximum sensitivity in spite of not using any metal quenchers. An increase in strip hydrophobicity during the fabrication process complements the strip to selectively permeate and present an extraction-free substitute analysis for chromatography. Hydrophobicity endows the strip with the capability to reuse the strip with ∼100% luminescence recovery.

Aggregation-Induced Luminescence Based UiO-66: Highly Selective Fast-Response Styrene Detection

One of the main pollutants in indoor air is volatile organic compounds (VOCs), which can cause great harm to human health. So the development of a VOC detection technology is of great significance. In this work, a tetraphenylethylene-functionalized UiO-66 based on aggregation-induced emission was successfully prepared. The UiO-66-TBPE structure exhibits the characteristic blue emission of TBPE ligands under UV excitation and can be used as a luminescence sensor for fast and efficient detection of VOCs. More importantly, UiO-66-TBPE has a high fluorescence sensing selectivity in p-xylene and styrene vapor. To further improve the practical performance, we combined UiO-66-TBPE with the polymer polyacrylate (PA) to obtain a flexible hybrid membrane with fast detection performance for styrene vapor within the 30 s. The deeper sensing mechanism of p-xylene and styrene inducing different fluorescence enhancement and fluorescence quenching is explained by a combination of modern characterization techniques and computer simulation. Finally, we applied UiO-66-TBPE/PA to leather and still maintained a good sensing performance. It provides a potential way for the application of fluorescent metal-organic frameworks (MOFs) to detect VOCs in daily life.

Chromogenic Anticounterfeit and Security Papers: An Easy and Effective Approach

The synthesis and preparation of 12 chromogenic polymers used to build an intelligent label for security paper applications are described. The process involves coating paper sheets with the polymers. Depending on the number of different polymers used in a combinatory way, a maximum of 12¹² combinations is possible, thus creating a matrix that is practically impossible to counterfeit. Currently, most anticounterfeiting proposals for paper-based packaging and documents involve some sort of verification under ultraviolet radiation, and the requirement of additional equipment often relegates the end-user to a passive role. In contrast, in our approach, the combination of sensory polymers in an array gives rise to an invisible label, i.e., an owner cryptographic key, which becomes visible upon scattering a nitrite solution (e.g., spraying or using an impregnated foam roller) over the printed label on the security paper. For this purpose, a monomer containing an aromatic primary amino group and another with an activated aromatic ring are covalently bonded to a polymer with high affinity toward paper, consisting essentially of units of methyl methacrylate and 1-vinyl-2-pyrrolidone. Subsequently, the paper samples are coated with the resulting sensory chromogenic polymer. By spraying, painting, or staining an aqueous acid solution of NaNO₂ (at least 1.20 g/L) and the chromogenic polymers, a well-defined color appears, because of the formation of an azo compound. This process provides users with a quick and facile authentication method without additional equipment and without affecting paper strength.

Synthesis and Properties of Aromatic-Terminated Diacetylene Organogelators and Their Application to Photopatterning of Polydiacetylenes

A series of simply structured diacetylene-diamide-based gelators (DAGs) with aromatic terminals were synthesized, and their gelation and subsequent photopolymerization abilities were analyzed. DAGs with an adequate spacer length (n) and tolyl terminals (DA-Tn) interacted with aromatic solvents, such as benzene and xylenes, at elevated temperatures. During the subsequent cooling process, the DAGs interacted with each other through CH-π interactions at their terminal positions. They also formed one-dimensional hydrogen bonding arrays through secondary amides, leading to stable organogels. These gels polymerized into π-conjugated polydiacetylenes (PDAs) under ultraviolet irradiation. In the p-xylene gels of DA-Tn, the spacer length exerted characteristic odd-even effects on the photopolymerization rates over a certain range (n = 3-6), which can be explained by periodic changes in the uniformity of the molecular packing modes. When the gelling solvent was changed to cyclohexane, the gelation and photopolymerization abilities were greatly improved because the DA-Tn gel networks became highly crystallized and transparent to ultraviolet light (254 nm). The ultimate conversion to PDA from DA-T8/cyclohexane gels was 45.2 wt %. Applying photolithographic techniques to the DAG with excellent photopolymerizability in the film state, we successfully fabricated microscale photopatterns of PDA. We also established a convenient removal process (development process) of DA monomers in unexposed areas. The resulting PDA patterns were quite stable to ambient light stimuli.

Visualising household air pollution: Colorimetric sensor arrays for monitoring volatile organic compounds indoors

Indoor air quality monitoring as it relates to the domestic setting is an integral part of human exposure monitoring and health risk assessment. Hence there is a great need for easy to use, fast and economical indoor air quality sensors to monitor the volatile organic compound composition of the air which is known to be significantly perturbed by the various source emissions from activities in the home. To meet this need, paper-based colorimetric sensor arrays were deployed as volatile organic compound detectors in a field study aiming to understand which activities elicit responses from these sensor arrays in household settings. The sensor array itself is composed of pH indicators and aniline dyes that enable molecular recognition of carboxylic acids, amines and carbonyl-containing compounds. The sensor arrays were initially deployed in different rooms in a single household having different occupant activity types and levels. Sensor responses were shown to differ for different room settings on the basis of occupancy levels and the nature of the room emission sources. Sensor responses relating to specific activities such as cooking, cleaning, office work, etc were noted in the temporal response. Subsequently, the colorimetric sensor arrays were deployed in a broader study across 9 different households and, using multivariate analysis, the sensor responses were shown to correlate strongly with household occupant activity and year of house build. Overall, this study demonstrates the significant potential for this type of simple approach to indoor air pollution monitoring in residential environments.

Novel Anthocyanin-Based Colorimetric Assay for the Rapid, Sensitive, and Quantitative Detection of Helicobacter pylori

Several different diagnostic tests have been reported for rapid, sensitive, and economical detection of bacterial pathogens, but most lack widespread and practical use in the clinic. In this study, we used anthocyanins from red cabbage (Brassica oleracea) as a natural pH indicator and, for the first time, incorporated this agent into a simple, rapid, and economical colorimetric strategy for the detection of Helicobacter pylori (H. pylori) (RCE@test). We prepared two sets of RCE@test solutions (test 1 is purple, and test 2 is blue) in different forms, including liquid, adsorbed filter paper, and agar, and investigated the performance of each RCE@test as a function of the test volume, H. pylori concentration, and reaction time. To elucidate the effect of the pathophysiological environment on these RCE@tests, H. pylori in an artificial gastric fluid was also detected. The 10 and 1 CFU/mL H. pylori suspensions were detected in 15 min and 3 h, respectively, and the limit of detection was determined down to 1 CFU/mL. We experimentally demonstrated the advantages of the RCE@test for detection of H. pylori by comparing it to a commercially available rapid urease test, the "CLO test (Campylobacter-like organism test)". In addition to colorimetric detection by the naked eyes, RGB (Red Green Blue) and Delta-E analysis in image-processing software was run to quantitatively monitor changes of color in the RCE@test using a smartphone application. Finally, we propose that this test provides simple, effective, rapid, and inexpensive detection and that it can be easily implemented for clinical use.

Ultrahigh-Sensitive Compression-Stress Sensor Using Integrated Stimuli-Responsive Materials

Measurement of mechanical stresses, such as compression, shear, and tensile stresses, contributes toward achieving a safer and healthier life. In particular, the detection of weak compression stresses is required for healthcare monitoring and biomedical applications. Compression stresses in the order of 10⁶ -10¹⁰  Pa have been visualized and/or quantified using mechano-responsive materials in previous works. However, in general, it is not easy to detect compression stresses weaker than 10³  Pa using conventional mechano-responsive materials because the dynamic motion of the rigid mechano-responsive molecules is not induced by such a weak stress. In the present work, weak compression stresses in the order of 10⁰ -10³  Pa are visualized and measured via the integration of stimuli-responsive materials, such as layered polydiacetylene (PDA) and dry liquid (DL), through response cascades. DLs consisting of liquid droplets covered by solid particles release the interior liquid and collapse with application of a weak compression stress. The color of the layered PDA is changed by the spilled liquid as a chemical stress. A variety of weak compression stresses, such as expiratory pressure, are visualized and colorimetrically measured using the paper-based device of the integrated stimuli-responsive materials. Diverse mechano-sensing devices can be designed via the integration of stimuli-responsive materials.

Colorimetric Sensing of Volatile Organic Compounds Produced from Heated Cooking Oils

Measurement of cooking-associated air pollution indoors is an integral part of exposure monitoring and human health risk assessment. There is a need for easy to use, fast, and economical detection systems to quantify the various emissions from different sources in the home. Addressing this challenge, a colorimetric sensor array (CSA) is reported as a new method to characterize volatile organic compounds produced from cooking, a major contributor to indoor air pollution. The sensor array is composed of pH indicators and aniline dyes from classical spot tests, which enabled molecular recognition of a variety of aldehydes, ketones, and carboxylic acids as demonstrated by hierarchical clustering and principal component analyses. To demonstrate the concept, these CSAs were employed for differentiation of emissions from heated cooking oils (sunflower, rapeseed, olive, and groundnut oils). Sensor results were validated by gas chromatography-mass spectrometry analysis, highlighting the potential of the sensor array for evaluating cooking emissions as a source of indoor air pollution.

Protonation-Triggered Supramolecular Gel from Macrocyclic Diacetylene: Gelation Behavior, Topochemical Polymerization, and Colorimetric Response

Supramolecular gels originating from the hierarchical self-assembly of low molecular weight organic molecules is a strongly emerging field of advanced material research for the fabrication of soft functional materials. Herein, a novel supramolecular gel was fabricated through the protonation-triggered unidirectional self-assembly of pyridine-attached macrocyclic diacetylene (PyMCDA). Basic nitrogen of a pyridine ring with a strong affinity toward proton transforms the neutral PyMCDA into gelator in its protonated pyridinium salt form (PyMCDA-H⁺), which further evolves to nano-fibrillar networks to yield a supramolecular gel. Under the irradiation of UV light, the white color gel turned to a robust covalently cross-linked blue-phase PDA gel. Interestingly, polymeric PyMCPDA-H⁺ gel exhibits a naked-eye detectable reversible blue-red colorimetric response for alternating acid/base (H₂SO₄/NH₄OH) and colorimetric sensitivity toward selected anions: CH₃COO^-, CN^-, HCOO^-, and CH₃CH₂COO^-. It is with the hope that this work point toward the utility and versatility of macrocyclic PDAs for constructing chromogenic supramolecular gels for their possible use in sensing systems.

Imidazolium-Functionalized Diacetylene Amphiphiles: Strike a Lighter and Wear Polaroid Glasses to Decipher the Secret Code

The development of smart inks that change color and transparency in response to external stimuli is very important for various fields, from modern art to safety and anticounterfeiting technology. A uniaxially oriented diacetylene thin film on a macroscopic area is obtained by coating, self-assembling and topochemical photopolymerizing of imidazolium-functionalized diacetylenes (M-DA and T-DA) and 4,6-decadiyne ink (70 wt%:20 wt%:10 wt%) exhibiting a lyotropic smectic A liquid-crystalline phase at room temperature. The color and transparency of letters and symbols written with the DA-based secret inks change reversibly from blue to red as well as from colorless transparent to black opaque depending on the temperature and polarization axis. A secret code written with thermoresponsive and polarization-dependent secret inks consisting of imidazolium-functionalized diacetylenes is successfully deciphered by wearing polaroid glasses and holding a burning torch.

Diacetylene-Functionalized Dendrons: Self-Assembled and Photopolymerized Three-Dimensional Networks for Advanced Self-Healing and Wringing Soft Materials

The physical properties of supramolecular soft materials strongly depend on the molecular packing structures constructed by thermodynamically and kinetically controlled molecular self-assembly. To investigate the relationship between molecular function and self-assembled molecular packing structure, a series of diacetylene (DA)-based supramolecules was synthesized by chemically connecting flexible dendrons to DA with amide (aDA-D) or ester (eDA-D) functions. The three-dimensional (3D) organogel network of amide-functionalized aDA-D was prepared in both polar and nonpolar solvents due to the intermolecular hydrogen bonding. 3D networks of aDA-D can be further stabilized by topochemical photopolymerization. The self-healing behavior of aDA-D was observed in the sheet-like structure formed in n-dodecane by the hydrophobic interaction between the gelator and solvent. The wringing behavior of aDA-D was also demonstrated using the dynamic interaction of amide function with n-butanol solvent. Kinetically controlled and photostabilized 3D networks can be a key component from biomedical devices to soft robotic applications.