Heteromorphic NiCo2S4/Ni3S2/Ni Foam as a Self-Standing Electrode for Hydrogen Evolution Reaction in Alkaline Solution

In situ activation-induced surface reconstruction on Cr-incorporated Ni3S2 for enhanced alkaline hydrogen evolution reaction

Ni3S2 has emerged as one of the most promising hydrogen evolution reaction (HER) catalysts due to its moderate activity, exceptional electrical conductivity, and scalable synthesis methods. However, the high energy barrier for H2O dissociation and weak desorption of the H* intermediate severely hinder its HER kinetics. In this study, a novel Cr-incorporated Ni3S2 was grown on a Ni mesh substrate (denoted as Cr-Ni3S2/NM) using a one-step electrodeposition approach, resulting in a large surface area with abundant Ni3S2/Cr2S3 heterojunctions. Subsequently, it underwent surface reconstruction after in situ activation (denoted as A-Cr-Ni3S2/NM), which not only enhanced charge and mass transfer but also altered the electronic structure by introducing more oxygen species on the catalyst surface and creating S vacancies. Using theoretical calculations, this in situ activation was shown to not only promote charge transport but also boost HER kinetics by strengthening OH* desorption for H2O dissociation and facilitating the desorption of H* intermediates. As a result, the fabricated A-Cr-Ni3S2/NM demonstrated exceptional HER performance with a small overpotential of 78 mV to deliver a current density of -10 mA cm-2, along with stability for over 200 h at 100 mA cm-2. While surface reconstruction has been intensively studied in catalysts for the oxygen evolution reaction, we illustrate that it also plays a significant and positive role in Cr-Ni3S2 HER catalysts in this study, thus providing a pathway for achieving high-performance HER catalysts.

Molecular Photoelectrodes with Enhanced Photogenerated Charge Transport for Efficient Solar Hydrogen Evolution

Photoelectrocatalytic cells for seawater splitting have shown promise toward large-scale deployment; however, challenges remain in operation performances, which outline clear research needs to scale up photoelectrodes with small loss of efficiency. Here, we report an approach for scalable and robust solar H2 evolution by enhancing photogenerated charge transport in a H2-evolving molecular photoelectrode. The photoelectrode is based on p-type conjugated polymers that are homogeneously distributed in a polycarbazole network. With a self-assembled NiS2 catalyst, the photoelectrode under solar irradiation (100 mW cm-2, AM 1.5 G) is capable of evolving H2 from seawater at an external quantum efficiency (EQE) of 34.4% under an applied bias of -0.06 V vs RHE. When scaling up from 1 cm2 to 25 cm2, the photoelectrode generates photocurrents stabilized at 0.4 A and maintains the high EQE at an efficiency loss of less than 1%. Investigation of the photogenerated charge-transport dynamics reveals that the kinetic basis for scaling up lies in the desirable hole diffusion length that far exceeds the spacing between adjacent conjugated-polymer chains due to interchain π-π interactions.

Self-Etching Synthesis of Superhydrophilic Iron-Rich Defect Heterostructure-Integrated Catalyst with Fast Oxygen Evolution Kinetics for Large-Current Water Splitting

Developing catalysts with rich metal defects, strong hydrophilicity, and extensive grain boundaries is crucial for enhancing the kinetics of electrocatalytic water oxidation and facilitating large-current water splitting. In this study, we utilized pH-controlled etching and gas-phase phosphating to synthesize a flower-like Ni2P-FeP4-Cu3P modified nickel foam heterostructure catalyst. This catalyst features pronounced hydrophilicity and a high concentration of Fe defects. It exhibits low overpotentials of 156 mV and 210 mV at current densities of 10 and 100 mA cm-2 respectively, and maintains stability for up to 200 h at 100 mA cm-2 with only 7.3 % degradation, showcasing outstanding electrocatalytic water oxidation performance. Furthermore, when integrated into a Ni2P-FeP4-Cu3P/NF||Pt-C/NF electrolyzer, it achieves excellent overall water splitting performance, reaching current densities of 10 and 400 mA cm-2 at just 1.47 V and 1.73 V, respectively, and operates stably for 60 h at 500 mA cm-2 with minimal degradation. Analysis indicates that high-valence oxyhydroxides/phosphides of Ni, Fe, and Cu act as the primary active species. The presence of abundant Fe defects enhances electron transfer, strong hydrophilicity improves electrolyte contact, and numerous grain boundaries synergistically modulate the activation energy between active sites and oxygen-containing intermediates, significantly improving the kinetics of water oxidation.

Construction of a Three-Phase MnS2/Co4S3/Ni3S2 Heterostructure for Boosting Oxygen Evolution

The rational construction of highly efficient electrocatalysts for the oxygen evolution reaction (OER) plays a critical role in energy conversion systems. Designing heterostructures is a common and effective strategy to improve the performance of electrocatalysts. In this paper, an MnS2/Co4S3/Ni3S2 heterostructure was synthesized on Ni foam using a one-step vulcanization method. It provides a modified electronic structure and plentiful three-phase heterogeneous interfaces that can effectively enrich the active sites and accelerate electron transfer, thereby improving the OER activity. Thanks to the heterostructure, the MnS2/Co4S3/Ni3S2 exhibits a low overpotential of 265 and 304 mV for the OER to reach current densities of 50 and 100 mA/cm2, respectively. Furthermore, the surface reconstruction of MnS2/Co4S3/Ni3S2 has been investigated, which revealed the formation of metal hydr(oxy)oxides evolved during the OER process. This work provides a facile strategy for constructing three-phase heterostructures, shedding light on the development of high-performance, nonprecious metal-based OER electrocatalysts.

First-principles calculation on electronic properties of hydrogen evolution reaction of Ni-based electrode surfaces with different monatomic doping

At present, the hydrogen evolution reaction (HER) of Ni-based electrode has an important influence on water electrolysis hydrogen production technology, involving complex electrochemical process of electrode. In this project, Materials Studio (MS) software was used to design and construct Ni-based electrode surface (NES) models with monatomic Mo, Co, Fe, Cr doping, and the NES models attached 1 H atom and 2H atoms were denoted as the NES-H models and NES-2H model, respectively. Then the first-principles calculation was carried out. The results showed that the doping of different atoms can effectively change the work function of the pure Ni. In the charge transfer process of the four NES-2H models, the distance between the two H atoms is most affected by Mo doping, and they leave the Ni electrode surface as a single H ion, respectively, while the effect on Co, Fe and Cr doping is relatively consistent, and they leave the Ni electrode surface with H2 molecules, respectively. The doping of four single atoms changes the distance of valence band (VB) top and conduction band (CB) bottom from Fermi level in NES, NES-H and NES-2H models, and affects the HER, in which Mo doping has the greatest effect. The TDOS of the above models is mainly derived from the PDOS of the d orbitals of the doped atoms and Ni atoms. The results will provide a theoretical basis for the research and development of Ni-based electrode materials in HER.

Enhanced Electrochemical Catalysis: Hydrogen Evolution Using Bimetallic Sulfides on Nickel Foam

Hydrogen is considered clean energy with broad application prospects for the 21st century, and water electrolysis plays a crucial role in hydrogen production. However, economic limitations and large overpotential values hinder its development. In this study, we deposited nickel (Ni), iron (Fe), and sulfur (S) onto nickel foam (NF) using the constant potential method to form the Ni-S-Fe/NF catalyst, which exhibited an exceptionally low overpotential (31 mV) at a current density of -10 mA cm-2, and a Tafel slope of 75.1 mV dec-1 in 1 M sodium hydroxide. It showed a minor charge resistance (1.256 Ω). The amorphous phase structure and optimized catalyst composition promoted outstanding hydrogen evolution activity. This work offers valuable perspectives on the industrial application of hydrogen production.

Pt-Quantum-Dot-Modified Sulfur-Doped NiFe Layered Double Hydroxide for High-Current-Density Alkaline Water Splitting at Industrial Temperature

Suitable electrocatalysts for industrial water splitting can veritably promote practical hydrogen applications. Rational surface design is exceptionally significant for electrocatalysts to bridge the gap between fundamental science and industrial expectation in water splitting. Here, Pt-quantum-dot-modified sulfur-doped NiFe layered double hydroxides (Pt@S-NiFe LDHs) are designed with eximious catalytic activity toward hydrogen evolution reaction (HER) under industrial condition. Benefiting from enhanced binding energy, mass transfer, and hydrogen release, Pt@S-NiFe LDHs exhibit outstanding activity in HER at high current densities. Notably, it obtains an impressively low overpotential of 71 mV and long-term stability of 200 h at 100 mA cm^-2 , exceeding commercial 40% Pt/C and most reported Pt-based electrocatalysts. Its mass activity is 2.7 times higher than that of 40% Pt/C with an overpotential of 100 mV. Furthermore, at industrial temperature (65 °C), the electrolyzer based on Pt@S-NiFe LDH needs just 1.62 V to reach the current density of 100 mA cm^-2 , superior to that of the commercial one of 40% Pt/C//IrO₂ . This work provides rational ideas to develop electrocatalysts with exceptional performance for industrial high-temperature water splitting at high current densities.

Interface engineering of hierarchical NiCoP/NiCoSx heterostructure arrays for efficient alkaline hydrogen evolution at large current density

The development of non-noble metal electrocatalysts with high activity and long-term stability for the hydrogen evolution reaction (HER), especially at large current density, is of great significance for industrial hydrogen production from water using renewable electricity. Constructing heterostructures with interfacial interactions is an effective strategy to improve the catalytic performance for large-current-density HER. Herein, we innovatively present a facile two-step electrodeposition method to immobilize a hierarchical NiCoP/NiCoS_x heterostructure on Ni foam (NF) for alkaline HER. The strong interfacial coupling effect between NiCoP and NiCoS_x not only offers abundant active sites for fast electrochemical reaction, but also enhances the charge transfer ability accompanied by high electrical conductivity. Consequently, the obtained self-supporting NiCoP/NiCoS_x/NF exhibits an excellent catalytic performance with low overpotentials of 68, 144 and 222 mV to deliver current densities of 10, 100 and 500 mA cm^-2 in 1 M KOH, along with good stability for more than 110 h, outperforming most of the reported non-noble metal based HER catalysts. Density functional theory (DFT) results further confirm that this bimetal phosphide/sulfide heterostructure can synergistically optimize the Gibbs free energy of H* during the HER process, thus accelerating the HER reaction kinetics. This work provides a new strategy toward the rational design of large-current-density electrocatalysts, which have great potential in practical large-scale hydrogen production.

Graphitic Carbon Cloth-Based Hybrid Molecular Catalyst: A Non-conventional, Synthetic Strategy of the Drop Casting Method for a Stable and Bifunctional Electrocatalyst for Enhanced Hydrogen and Oxygen Evolution Reactions

Hydrogen energy production through water electrolysis is envisaged as one of the most promising, sustainable, and viable alternate sources to cater to the incessant demands of renewable energy storage. Germane to our effort in this field, we report easily synthesizable and very cost-effective isoperthiocyanic acid (IPA) molecular complexes as electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) under acidic and alkaline conditions. The Pd(II)IPA, Co(II)IPA, and Ni(II)IPA complexes were synthesized and were evaluated for HER and OER applications. These complexes when embedded onto graphitized carbon cloth (GrCC) exhibited a significant enhancement in the HER activity in contrast to their pristine counterparts. The hybrid electrocatalyst Pd(II)IPA among the three showed an extremely low overpotential of 94.1 mV to achieve a current density of 10 mA cm-2, while Co(II)IPA and Ni(II)IPA complexes showed overpotentials of 367 and 394 mV, respectively, to achieve a current density of 10 mA cm-2. These complexes on carbon cloth showed decreased charge transfer resistance compared to that of pristine metal complexes. The enhanced catalytic activity of the complexes on carbon cloth can be attributed to the porous and conducting nature of the graphitized carbon cloth. For OER activity, the Pd(II)IPA complex showed an excellent performance with an overpotential value of 210 mV, while Co(II)IPA and Ni(II)IPA exhibited overpotentials of 400 and 270 mV, respectively, to drive a current density of 10 mA cm-2 in 0.1 M KOH. This work further widens the scope and application of molecular complexes in combination with an excellent carbon support for renewable energy storage applications.

Niobium-Incorporated CoSe2 Nanothorns with Electronic Structural Alterations for Efficient Alkaline Oxygen Evolution Reaction at High Current Density

Developing cost-effective, highly active, and robust electrocatalysts for oxygen evolution reaction (OER) at high current density is a critical challenge in water electrolysis since the sluggish kinetics of the OER significantly impedes the energy conversion efficiency of overall water splitting. Here, a 1D nanothorn-like Nb-CoSe₂ /CC (CC=carbon cloth) structure was developed as an efficient OER catalyst. The optimized Nb-CoSe₂ /CC catalyst exhibited remarkable OER performance with the low overpotentials of 220 mV at 10 mA cm^-2 and 297 mV 200 mA cm^-2 and a small Tafel slope (54.1 mV dec^-1 ) in 1.0 m KOH electrolyte. More importantly, the Nb-CoSe₂ /CC electrode displayed superior stability after 60 h of continuous operation. In addition, cell voltages of 1.52 and 1.93 V were required to achieve 10 and 500 mA cm^-2 for the electrolyzer made of Nb-CoSe₂ /CC (anode) and the Pt/C (cathode). Density functional theory (DFT) calculations combined with experimental results revealed that incorporating niobium into the CoSe₂ could optimize the adsorption free energy of the reaction intermediates and enhance the conductivity to improve the catalytic activity further. Additionally, the super-hydrophilicity of Nb-CoSe₂ /CC resulting from the surface defects increased the surface wettability and facilitated reaction kinetics. These results indicate that Nb-CoSe₂ /CC intrinsically enhances OER performance and possesses potential practical water electrolysis applications.

Self-supported Co9S8-Ni3S2-CNTs/NF electrode with superwetting multistage micro-nano structure for efficient bifunctional overall water splitting

Electrochemical water splitting for hydrogen production using cost-effective and high-efficiency electrocatalysts in alkaline electrolytes is of great significance for solving energy crisis and environmental pollution. Herein, we reported a superhydrophilic and underwater superaerophobic multistage layered micro-nano structure ofCo₉S₈-Ni₃S₂-CNTs/NF on nickel foam (NF) prepared by a simple one-step hydrothermal procedure. Particularly, the multistage layered micro-nano structure makes the electrode superhydrophilic and superaerophobic, which can facilitate the exposure of active sites, accelerate the tansfer of electrolyte and the release of gas bubbles. Consequently, the rough electrode demonstrated excellent catalytic performance in alkaline condition, which only need a low overpotential 127 mV for oxygen evolution reaction (OER) and 243 mV for hydrogen evolution reaction (HER) at 10 mA cm^-2 and can keep a long durability for 10 h at 10 mA cm^-2. In addition, the production of hydrogen in an electrolytic water device with Co₉S₈-Ni₃S₂-CNTs/NF as bifunctional electrode prowered by the electricity derived from solar and wind energy in laboratory condition was artificially simulated. This work represents a perspective in improving the electrocatalytic performance of water splitting by structure and wettability regulation and opens a new avenue for clean energy generation.

Surface Roughening Strategy for Highly Efficient Bifunctional Electrocatalyst: Combination of Atomic Layer Deposition and Anion Exchange Reaction

Electrocatalytic water splitting, which is an interface-dominated process, can be significantly accelerated by increasing the number of front-line surface active sites (N_A ) of the electrocatalyst. In this study, a unique method is used for increasing the N_A by converting the smooth ultrathin atomic-layer-deposited nanoshells of the electrocatalysts into nano-roughened active shell layers using a controlled anion-exchange reaction (AER). The coarse thin nanoshells present abundant surface active sites, which are generated owing to the inherent unit-cell volume mismatch induced during the AER. Consequently, the nano-roughened electrodes accelerate the sluggish water reaction kinetics and lower the overpotentials required for the hydrogen and oxygen evolution reactions. In addition, the electronic modulation induced by the nanoshell layer at the core-nanoshell interface amplifies the local electron density, as confirmed using electrochemical analysis data and density functional theory calculations. Because of the integrity of the composite electrodes during water-splitting half-cell reactions, their durability for industrial seawater electrolysis is evaluated. The results indicate that their electrochemical activity does not change significantly after 10 days of continuous overall water splitting.

Ni2P nanowire arrays grown on Ni foam as an efficient monolithic cocatalyst for visible light dye-sensitized H2 evolution

Nanostructured H2 evolution cocatalysts are able to promote charge separation and thus enhance the efficiency of the photocatalytic H2 evolution reaction (HER). However, the nanosized cocatalyst particles are easily detached...

Highly Mesoporous Cobalt-Hybridized 2D Cu3P Nanosheet Arrays as Boosting Janus Electrocatalysts for Water Splitting

Recently, developing economical electrocatalysts with high performance in water decomposition has become a research hotspot. Herein, two kinds of cobalt-hybridized Cu₃P nanostructure array electrocatalysts (including highly mesoporous 2D nanosheets and sugar gourd-like 1D nanowires) were controllably grown on a nickel foam substrate through a simple hydrothermal method combined with a subsequent phosphating treatment method. An electrocatalytic test indicated that the as-prepared 2D nanosheet array exhibited excellent activity and stability toward hydrogen evolution reaction under alkaline conditions, which offered a low overpotential of 99 mV at 10 mA/cm² and a small Tafel slope of 70.4 mV/dec, whereas a competitive overpotential of 272 mV was required for oxygen evolution reaction. In addition, the 2D nanosheet array delivered a low cell voltage of 1.66 V at 10 mA/cm² in a symmetric two-electrode system, implying its huge potential in overall water decomposition. The electrocatalytic performance is superior to the as-prepared 1D nanowire array and most of the Cu₃P-related electrocatalysts previously reported. Experimental measurements and first-principles calculations show that the excellent performance of the 2D nanosheet array can be attributed to its unique 2D mesoporous structure and hybridization of cobalt, which not only provide a large electrochemically active surface and fast electrocatalytic reaction kinetics but also weaken the binding strength of electrocatalytic reaction intermediates. The present study provides a simple and controllable approach to synthesize Cu₃P-based bimetallic phosphide nanostructures, which can be used as boosting Janus electrocatalysts for water decomposition.

A durable and pH-universal self-standing MoC-Mo2C heterojunction electrode for efficient hydrogen evolution reaction

Efficient water electrolyzers are constrained by the lack of low-cost and earth-abundant hydrogen evolution reaction (HER) catalysts that can operate at industry-level conditions and be prepared with a facile process. Here we report a self-standing MoC-Mo₂C catalytic electrode prepared via a one-step electro-carbiding approach using CO₂ as the feedstock. The outstanding HER performances of the MoC-Mo₂C electrode with low overpotentials at 500 mA cm^-2 in both acidic (256 mV) and alkaline electrolytes (292 mV), long-lasting lifetime of over 2400 h (100 d), and high-temperature performance (70 ^oC) are due to the self-standing hydrophilic porous surface, intrinsic mechanical strength and self-grown MoC (001)-Mo₂C (101) heterojunctions that have a ΔG_H* value of -0.13 eV in acidic condition, and the energy barrier of 1.15 eV for water dissociation in alkaline solution. The preparation of a large electrode (3 cm × 11.5 cm) demonstrates the possibility of scaling up this process to prepare various carbide electrodes with rationally designed structures, tunable compositions, and favorable properties.

Flower-like 1T-MoS2/NiCo2S4 on a carbon cloth substrate as an efficient electrocatalyst for the hydrogen evolution reaction

The 1T-MoS₂/NiCo₂S₄ composite in situ grown on carbon cloth (CC) was successfully prepared by a two-step hydrothermal method as an efficient electrode for the hydrogen evolution reaction. The morphology and composition characterization show that the composite has a flower-like structure with a large number of edges and surfaces exposed, and the content of the 1T phase in MoS₂ is 63%. 1T-MoS₂/NiCo₂S₄/CC exhibits an overpotential of 107 mV at 10 mA cm^-2, and a Tafel slope of 66.4 mV dec^-1 in an alkaline electrolyte. After continuous electrolysis for 24 h at an overpotential of 170 mV, 86% of the original current density was retained in an chronoamperometry measurement. The outstanding catalytic performance of the composite is ascribed to its unique structure, high 1T-MoS₂ content and the synergistic catalysis between 1T-MoS₂ and NiCo₂S₄. This work provides a facile and effective strategy for fabricating the 1T-MoS₂/NiCo₂S₄/CC composite and demonstrates that the composite is expected to be a competitive non-noble HER catalyst.

Electrodeposited Co-W-P ternary catalyst for hydrogen evolution reaction

In order to reduce the overpotential of hydrogen evolution reaction (HER), the ternary coating Co-W-P was deposited on the surface of the nickel foam by electrochemical deposition to obtain a highly active electrode. Based on the measured double layer capacitance (C_dl) and HER activity, there is volcanic behavior between the intrinsic activity of Co-W-P and the Co:W ratio in the electrolyte. W and P play different roles in the formation of nanoparticles, and work together to achieve the large electrochemical surface area and excellent activity. When applied to the modification of other catalysts (Ni-P and Fe-P), the higher intrinsic activity was obtained after the introduction of W.

System Theoretical Study on the Effect of Variable Nonmetallic Doping on Improving Catalytic Activity of 2D-Ti3C2O2 for Hydrogen Evolution Reaction

2D MXenes have been found to be one of the most promising catalysts for hydrogen evolution reaction (HER) due to their excellent electronic conductivity, hydrophilic nature, porosity and stability. Nonmetallic (NM) element doping is an effective approach to enhance the HER catalytic performance. By using the density functional theory (DFT) method, we researched the effect of nonmetallic doping (different element types, variable doping concentrations) and optimal hydrogen absorption concentration on the surface of NM-Ti₃C₂O₂ for HER catalytic activity and stability. The calculation results show that doping nonmetallic elements can improve their HER catalytic properties; the P element dopants catalyst especially exhibits remarkable HER performance (∆GH = 0.008 eV when the P element doping concentration is 100% and the hydrogen absorption is 75%). The origin mechanism of the regulation of doping on stability and catalytic activity was analyzed by electronic structures. The results of this work proved that by controlling the doping elements and their concentrations we can tune the catalytic activity, which will accelerate the further research of HER catalysts.

Ultrathin NiSe Nanosheets on Ni Foam for Efficient and Durable Hydrazine-Assisted Electrolytic Hydrogen Production

Hydrazine-assisted electrochemical water splitting is an important avenue toward low cost and sustainable hydrogen production. An efficient and stable bifunctional electrocatalyst for the hydrogen evolution reaction (HER) and the anodic hydrazine oxidation reaction (HzOR) is fundamental to this goal. Herein, we employed a facile method to fabricate ultrathin NiSe nanosheet arrays on nickel foam (NiSe/NF), which exhibits predominant electrocatalytic activity for both HER and HzOR. Our investigations revealed that the excellent electrocatalytic activity of the NiSe/NF mainly arises from the abundant electrocatalytic active sites endowed by the ultrathin nanosheet morphology, the rugged feature of the extended (100) nanosheet surface, the rich presence of Se on the nanosheet surface, and the three-dimensional (3D) porous structure of the NF and other factors such as high conductivity of the NiSe/NF and strong NiSe-NF adhesion. We assembled a hydrazine-boosted electrochemical water splitting cell using NiSe/NF as a bifunctional catalyst for both of the electrodes, and the constructed cell exhibits an ultralow overpotential (310 mV at 10 mA cm^-2), which is robust for 30 h continuous electrolysis in a 1 M KOH electrolyte. This work provides a promising avenue toward low cost, high-efficiency, and stable hydrogen production based on hydrazine-assisted electrolytic water splitting for future.

Controllable design of 3D hierarchical Co/Ni-POM nanoflower compounds supported on Ni foam for the hydrogen evolution reaction

The outstanding HER activity of Co/Ni-POM/NF stems from the synergistic effect between the metallic elements of the Co/Ni-POM and its large specific surface area.

Nitrogen modulated NiMoO4 with enhanced activity for the electrochemical oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid

NiMoO4 catalyst modified with nitrogen can significantly improve the electrocatalytic oxidation performance of HMF to FDCA.

Potentiostatic electrodeposition of Ni-Se-Cu on nickel foam as an electrocatalyst for hydrogen evolution reaction

Development of cost-effective and efficient earth-abundant catalysts for hydrogen evolution reaction (HER) is a great challenge. In this study, by one-step potentiostatic electrodeposition, the Ni-Se-Cu electrocatalyst on nickel foam was fabricated as a binder-free HER electrocatalyst. As compared with Ni-Se electrocatalysts, such fabricated Ni-Se-Cu electrocatalyst exhibited prominent electrocatalytic activity to the HER in alkaline electrolyte. This Ni-Se-Cu electrocatalyst exhibits a small overpotential of 136 mV to achieve a current density of 10 mA·cm^-2 and high electrochemical stability. The remarkable HER properties of Ni-Se-Cu electrocatalyst mainly originate from high electronic conductivity induced by Cu-doping. This work shows a cheap and simple avenue to develop high efficient non-noble electrochemical electrocatalysts for HER.

Superb Hydrogen Evolution by a Pt Nanoparticle-Decorated Ni3S2 Microrod Array

Ni₃S₂ has attracted great interest as a potential alternative catalyst for the oxygen evolution reaction; however, the formation of sulfur-hydrogen bonds on Ni₃S₂ suppressed the hydrogen evolution reaction (HER), which remains a significant challenge in interface engineering of Ni₃S₂ structures for enhancing its HER performance. Herein, we demonstrate an efficient strategy for constructing a Pt nanoparticle-decorated Ni₃S₂ microrod array supported on Ni foam (Pt/Ni₃S₂/NF) by electrodeposition of Pt nanoparticles on hydrothermally synthesized Ni₃S₂/NF. The Pt/Ni₃S₂/NF heterostructure array exhibits an extremely low overpotential of 10 mV at 10 mA cm^-2, surpassing that of commercial Pt/C and representing the best alkaline HER catalysts to date. Impressively, at an overpotential of 0.15 V, Pt/Ni₃S₂/NF displays a Pt mass activity and a normalized current density (against the electrochemical surface area) of 5.52 A mg^-1 and 1.84 mA cm^-2, respectively, which are 8.8 and 15.3 times higher compared to those of Pt/C, respectively. In addition, this electrode also shows much enhanced catalytic performance and stability in neutral media. Such enhanced HER activities are attributed to the constructed interface in the Pt/Ni₃S₂ heterostructure array, which synergistically favor water dissociation and subsequent hydrogen evolution, which is supported by density functional theory calculations.

Sulfur vacancy-tailored NiCo2S4 nanosheet arrays for the hydrogen evolution reaction at all pH values

Sulfur vacancy-tailored NiCo₂S₄ nanosheet arrays as efficient electrocatalysts for the hydrogen evolution reaction at all pH values.

Hybrid Ni3S2–MoS2 nanowire arrays as a pH-universal catalyst for accelerating the hydrogen evolution reaction

Hybrid Ni₃S₂–MoS₂ NWAs/NF obtained via a facile two-step hydrothermal route shows high catalytic performance toward hydrogen evolution in a pH-universal environment.

Defect-Enriched Nitrogen Doped-Graphene Quantum Dots Engineered NiCo2 S4 Nanoarray as High-Efficiency Bifunctional Catalyst for Flexible Zn-Air Battery

Flexible Zn-air batteries have recently emerged as one of the key energy storage systems of wearable/portable electronic devices, drawing enormous attention due to the high theoretical energy density, flat working voltage, low cost, and excellent safety. However, the majority of the previously reported flexible Zn-air batteries encounter problems such as sluggish oxygen reaction kinetics, inferior long-term durability, and poor flexibility induced by the rigid nature of the air cathode, all of which severely hinder their practical applications. Herein, a defect-enriched nitrogen doped-graphene quantum dots (N-GQDs) engineered 3D NiCo₂ S₄ nanoarray is developed by a facile chemical sulfuration and subsequent electrophoretic deposition process. The as-fabricated N-GQDs/NiCo₂ S₄ nanoarray grown on carbon cloth as a flexible air cathode exhibits superior electrocatalytic activities toward both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), outstanding cycle stability (200 h at 20 mA cm^-2 ), and excellent mechanical flexibility (without observable decay under various bending angles). These impressive enhancements in electrocatalytic performance are mainly attributed to bifunctional active sites within the N-GQDs/NiCo₂ S₄ catalyst and synergistic coupling effects between N-GQDs and NiCo₂ S₄ . Density functional theory analysis further reveals that stronger OOH* dissociation adsorption at the interface between N-GQDs and NiCo₂ S₄ lowers the overpotential of both ORR and OER.

In Situ Growth of Ag Nanodots Decorated Cu2 O Porous Nanobelts Networks on Copper Foam for Efficient HER Electrocatalysis

Developing earth-abundant electrocatalysts for high-efficiency hydrogen evolution reaction (HER) has become one of the leading research frontiers in energy conversion. Here, the design and in situ growth of Ag nanodots decorated Cu₂ O porous nanobelts networks on Cu foam (denoted as Ag@Cu₂ O/CF) are carried out via a simple one-pot solution strategy at room temperature. Serving as self-supporting electrocatalysts, Ag@Cu₂ O porous nanobelts provide plentiful active sites, and the 3D hybrid foams provide fast transportation for electrolyte and short diffusion path for newly formed H₂ bubbles, which result in excellent electrocatalytic HER activity and long-term stability. Owing to the synergistic effect between Ag nanodots and Cu₂ O porous nanobelts and CF, the hybrid electrocatalyst exhibits a low Tafel slope of 58 mV dec^-1 , a small overpotential of 108 mV at 10 mA cm^-2 , and high durability for more than 20 h at a potential of 200 mV for HER in 1.0 mol L^-1 KOH solution.

Robust NiCoP/CoP Heterostructures for Highly Efficient Hydrogen Evolution Electrocatalysis in Alkaline Solution

Electrocatalytic hydrogen evolution reaction, the cornerstone of the emerging hydrogen economy, can be essentially facilitated by robustly heterostructural electrocatalysts. Herein, we report a highly active and stably heterostructural electrocatalyst consisting of NiCoP nanowires decorated with CoP nanoparticles on a nickel foam (NiCoP-CoP/NF) for effective hydrogen evolution. The CoP nanoparticles are strongly interfaced with NiCoP nanowires producing abundant electrocatalytically active sites. Combined with the integrated catalyst design, NiCoP-CoP/NF affords a remarkable hydrogen evolution performance in terms of high activity, enhanced kinetics, and outstanding durability in an alkaline electrolyte, superior to most of the Co (or Ni)-phosphide-based catalysts reported previously. Density functional theory calculations demonstrate that there is an interfacial effect between NiCoP and CoP, which allows a preferable hydrogen adsorption and thus contributes to the significantly enhanced performance. Furthermore, an electrolyzer employing NiCoP-CoP/NF as the cathode and RuO₂/NF as the anode (NiCoP-CoP/NF||RuO₂/NF) exhibits excellent water-splitting activity and outstanding durability, which is comparable to that of the benchmark Pt-C/NF||RuO₂/NF electrolyzer.

Synthesis of Ni4.5Fe4.5S8/Ni3S2 film on Ni3Fe alloy foam as an excellent electrocatalyst for the oxygen evolution reaction

Directly synthesizing bicomponent electrocatalysts in the nanostructured form from bulk alloy foam has many potential advantages: robust stability, synergistic effects and fast electron transfer. Here, Ni4.5Fe4.5S8/Ni3S2 film with micrometer thickness on bulk substrate was synthesized by a simple one-step hydrothermally assisted sulfurization of Ni3Fe alloy foam for the oxygen evolution reaction (OER) in basic media. Benefiting from the synergetic effect of the bicomponent, reduced interfacial resistance between electrocatalyst and metal substrate, and more exposed catalytic sites on the microstructured film, the as-prepared electrocatalyst (Ni4.5Fe4.5S8/Ni3S2‖Ni3Fe) behaves as a highly efficient and robust oxygen evolution electrode with felicitous current density in alkaline electrolytes (1 M KOH). It requires an overpotential of only 264 mV to drive 100 mA cm-2 with its catalytic activity being maintained for at least 20 h in 1 M KOH. In the near future, this kind of synthesis strategy can be easily extended to investigate many electrocatalysts derived from 3D alloyed foam with various ratios of the different components, opening new avenue for understanding the relationship between material properties and electrochemical performance.

Recent advances in metal sulfides: from controlled fabrication to electrocatalytic, photocatalytic and photoelectrochemical water splitting and beyond

This review describes an in-depth overview and knowledge on the variety of synthetic strategies for forming metal sulfides and their potential use to achieve effective hydrogen generation and beyond.