Molecular O2 Activation over Cu(I)-Mediated C≡N Bond for Low-Temperature CO Oxidation

Innovative dual-active sites in interfacially engineered interfaces for high-performance S-scheme solar-driven CO2 photoreduction

The realization of 2D/2D Van der Waals (VDW) heterojunctions represents an advanced approach to achieving superior photocatalytic efficiency. However, electron transfer through Van der Waals heterojunctions formed via ex-situ assembly encounters significant challenges at the interface due to contrasting morphologies and potential barriers among the nanocomposite substituents. Herein, a novel approach is presented, involving the insertion of a phosphate group between copper phthalocyanine (CuPc) and B-doped and N-deficient g-C3N4 (BDCNN), to design and construct a Van der Waals heterojunction labeled as xCu[acs]/yP-BDCNN. The introduction of phosphate as a charge modulator and efficient conduit for charge transfer within the heterojunction resulted in the elimination of spatial barriers and induced electron movement from BDCNN to CuPc in the excited states. Consequently, the catalytic central Cu2+ in CuPc captured the photoelectrons, leading to the conversion of CO2 to C2H4, CO and CH4. Remarkably, this approach resulted in a 78-fold enhancement in photocatalytic efficiency compared to pure BDCNN. Moreover the findings confirm that the 2D-2D 4Cu[acs]/9P-BDCNN sheet-like heterojunction effectively boosts photocatalytic activity for persistent pollutants such as methyl orange (MO), methylene blue (MB), rhodamine B (RhB), and tetracycline antibiotics (TCs). The introduction of "interfacial interacting" substances to establish an electron transfer pathway presents a novel and effective strategy for designing photocatalysts capable of efficiently reducing CO2 into valuable products.

Neighboring sp-Hybridized Carbon Participated Molecular Oxygen Activation on the Interface of Sub-nanocluster CuO/Graphdiyne

Activation of O₂ is a crucial step in oxidation processes. Here, the concept of sp-hybridized C≡C triple bonds as an electron donor is adopted to develop highly active and stable catalysts for molecular oxygen activation. We demonstrate that the neighboring sp-hybridized C and Cu sites on the interface of the sub-nanocluster CuO/graphdiyne are the key structures to effectively modulate the O₂ activation process in the bridging adsorption mode. The as-prepared sub-nanocluster CuO/graphdiyne catalyst exhibited the highest CO oxidation activity and readily converted 50% CO at around 133 °C, which is 34 and 94 °C lower than that for CuO/graphene and CuO/active carbon catalysts, respectively. In situ diffused reflectance infrared Fourier transform spectroscopy and density functional theory calculation results proved that the neighboring sp-hybridized C is more favorable to promote the rapid dissociation of carbonate than sp²-hybridized C without overcoming any energy barrier. The gaseous CO directly reacts with the active molecular oxygen and tends to proceed through the E-R mechanism with a relatively low energy barrier (0.20 eV). This work revealed that sp-hybridized C of graphdiyne-based materials could effectively improve the O₂ activation efficiency, which could facilitate the low-temperature oxidation processes.

Synthesis of mixed-valence Cu phthalocyanine/graphene/g-C3N4 ultrathin heterojunctions as efficient photocatalysts for CO2 reduction

Mixed-valence Cu phthalocyanine/graphene/g-C3N4 ultrathin heterojunctions for efficient photocatalytic CO2 reduction.

Directing transition metal-based oxygen-functionalization catalysis

This review presents the recent progress of oxygen functionalization reactions based on non-electrochemical (conventional organic synthesis) and electrochemical methods. Although both methods have their advantages and limitations, the former approach has been used to synthesize a broader range of organic substances as the latter is limited by several factors, such as poor selectivity and high energy cost. However, because electrochemical methods can replace harmful terminal oxidizers with external voltage, organic electrosynthesis has emerged as greener and more eco-friendly compared to conventional organic synthesis. The progress of electrochemical methods toward oxygen functionalization is presented by an in-depth discussion of different types of electrically driven-chemical organic synthesis, with particular attention to recently developed electrochemical systems and catalyst designs. We hope to direct the attention of readers to the latest breakthroughs of traditional oxygen functionalization reactions and to the potential of electrochemistry for the transformation of organic substrates to useful end products.

Engineering the Nucleophilic Active Oxygen Species in CuTiOx for Efficient Low-Temperature Propene Combustion

Industrialization has resulted in the rapid increase of volatile organic compound (VOC) emissions, which have caused serious issues to human health and the environment. In this study, an extensive Cu incorporating TiO₂ induced nucleophilic oxygen structure was constructed in the CuTiO_x catalyst, which exhibited superior low-temperature catalytic activity for C₃H₆ combustion. Thorough structural, surface characterization and density functional theory (DFT) calculations revealed that the Cu-O-Ti hybridization induced nucleophilic oxygen initiates C₃H₆ combustion by abstracting the C-H bond. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) results indicated that incorporated copper species acted as the major adsorbent site for the propene molecule. In combination of the DRIFTS and DFT results, the promotion effect of the nucleophilic O on the C-H bond abstraction and CO₂ formation pathway was proposed. The surface doping induced nucleophilic oxygen as strong Brønsted basic sites for low-temperature propene combustion exemplified an efficient strategy for rational design of next-generation environmental catalysts.

Spin Polarization-Induced Facile Dioxygen Activation in Boron-Doped Graphitic Carbon Nitride

Dioxygen (O₂) activation is a vital step in many oxidation reactions, and a graphitic carbon nitride (g-C₃N₄) sheet is known as a famous semiconductor catalytic material. Here, we report that the atomic boron (B)-doped g-C₃N₄ (B/g-C₃N₄) can be used as a highly efficient catalyst for O₂ activation. Our first-principles results show that O₂ can be easily chemisorbed at the B site and thus can be highly activated, featured by an elongated O-O bond (∼1.52 Å). Interestingly, the O-O cleavage is almost barrier free at room temperatures, independent of the doping concentration. It is revealed that the B atom can induce considerable spin polarization on B/g-C₃N₄, which accounts for O₂ activation. The doping concentration determines the coupling configuration of net-spin and thus the magnitude of the magnetism. However, the distribution of net-spin at the active site is independent of the doping concentration, giving rise to the doping concentration-independent catalytic capacity. The unique monolayer geometry and the existing multiple active sites may facilitate the adsorption and activation of O₂ from two sides, and the newly generated surface oxygen-containing groups can catalyze the oxidation coupling of methane to ethane. The present findings pave a new way to design g-C₃N₄-based metal-free catalysts for oxidation reactions.

Elucidating the Nature of the Cu(I) Active Site in CuO/TiO2 for Excellent Low-Temperature CO Oxidation

Stabilized Cu⁺ species have been widely considered as catalytic active sites in composite copper catalysts for catalytic reactions with industrial importance. However, few examples comprehensively explicated the origin of stabilized Cu⁺ in a low-cost and widely investigated CuO/TiO₂ system. In this study, mass producible CuO/TiO₂ catalysts with interface-stabilized Cu⁺ were prepared, which showed excellent low-temperature CO oxidation activity. A thorough characterization and theoretical calculations proved that the strong charge-transfer effect and Ti-O-Cu hybridization in Ti-doped CuO(111) at the CuO/TiO₂ interface contributed to the formation and stabilization of Cu⁺ species. The CO molecule adsorbed on Cu⁺ and reacted directly with Ti doping-promoted active lattice oxygen via a Mars-van Krevelen mechanism, leading to the enhanced low-temperature activity.

Highly Intensified Molecular Oxygen Activation on Bi@Bi2MoO6 via a Metallic Bi-Coordinated Facet-Dependent Effect

Construction of the semimetal/semiconductor composite interface is widely used to promote the O₂ molecule adsorption and charge transfer for boosting solar-driven molecular oxygen activation (MOA). Herein, a Bi@Bi₂MoO₆ heterostructure is fabricated via a two-step wet chemical method as a typical photocatalyst to investigate the underlying mechanism of Bi-coordinated facet-dependent MOA under visible-light illumination. Density functional theory and systematical characterization methods reveal the distinct charge transfer and O₂ activation processes on the surface of Bi nanoparticle-deposited Bi₂MoO₆ nanosheets with different facets exposed. By virtue of a particular and efficient [Bi₂O₂]²⁺ → Bi → MoO₄^2- interfacial charge-transfer channel, Bi deposited on the (001) facet of Bi₂MoO₆ can observably intensify MOA, thereby giving birth to more generation of reactive oxygen species and endowing the Bi@Bi₂MoO₆ with excellent photocatalytic performance in sodium pentachlorophenate (NaPCP) removal. The decomposition pathway of NaPCP is also proposed based on the intermediate determination and mineralization analysis. This work provides deep insights into the mechanism of facet-dependent MOA over a semimetal-semiconductor system and also sheds light on designing effective molecular oxygen-activated interface for environmental remediation.

Iron oxides with a reverse spinel structure: impact of active sites on molecule adsorption

Fe₃O₄ and γ-Fe₂O₃ with the same crystal structure reflect different catalytically active sites leading to different catalyst properties.