Poly(dimethylsiloxane)/ZnO Nanoflakes/Three-Dimensional Graphene Heterostructures for High-Performance Flexible Energy Harvesters with Simultaneous Piezoelectric and Triboelectric Generation

Fabrication and Optimization of Additively Manufactured Hybrid Nanogenerators for Wearable Devices

This paper aims to fabricate a hybrid piezoelectric/triboelectric nanogenerator via fusion deposition modeling as a proof of concept in the wearable device industry. The nanogenerator structure consists of a TPU/ZnO nanocomposite and an Ecoflex layer. The nanocomposite layer is fabricated using two different weight percentages (15 wt% and 20 wt%) and poled piezoelectric sheets, generating 2.63 V to 3.46 V. Variations regarding the nanogenerator's physical parameters were implemented to examine the effect on nanogenerator performance under different frequencies. The hybrid nanogenerator enabled energy harvesting for wearable devices. It was strapped on the side of the wrist to generate a potential difference with the motion of the wrist, creating a contact separation piezoelectric/triboelectric nanogenerator. Furthermore, a piezoelectric sheet was placed at the bottom of the wrist to harvest energy. The hybrid nanogenerator provided a maximum triboelectric response of 5.75 V and a maximum piezoelectric response of 2.85 V during wrist motion. The piezoelectric nanogenerator placed at the bottom of the wrist generated up to 4.78 V per wrist motion.

MXene-Based Nanocomposites for Piezoelectric and Triboelectric Energy Harvesting Applications

Due to its superior advantages in terms of electronegativity, metallic conductivity, mechanical flexibility, customizable surface chemistry, etc., 2D MXenes for nanogenerators have demonstrated significant progress. In order to push scientific design strategies for the practical application of nanogenerators from the viewpoints of the basic aspect and recent advancements, this systematic review covers the most recent developments of MXenes for nanogenerators in its first section. In the second section, the importance of renewable energy and an introduction to nanogenerators, major classifications, and their working principles are discussed. At the end of this section, various materials used for energy harvesting and frequent combos of MXene with other active materials are described in detail together with the essential framework of nanogenerators. In the third, fourth, and fifth sections, the materials used for nanogenerators, MXene synthesis along with its properties, and MXene nanocomposites with polymeric materials are discussed in detail with the recent progress and challenges for their use in nanogenerator applications. In the sixth section, a thorough discussion of the design strategies and internal improvement mechanisms of MXenes and the composite materials for nanogenerators with 3D printing technologies are presented. Finally, we summarize the key points discussed throughout this review and discuss some thoughts on potential approaches for nanocomposite materials based on MXenes that could be used in nanogenerators for better performance.

A self-powered sound-driven humidity sensor for wearable intelligent dehydration monitoring system

Self-powered wearable sensing systems have attracted great attention for their application in continuous health monitoring, which can reveal real-time physiological information on the body. Here, an innovative self-powered sound-driven humidity sensor for wearable intelligent dehydration monitoring system has been proposed. The sensor is primarily comprised of PTFE membrane, ZnO nanoarrays and Ti thin film. The piezoelectric/triboelectric effect of ZnO nanoarrays/PTFE membrane is coupled with the humidity sensing process. Sound wave can drive PTFE membrane to vibrate, and the contact and separation between PTFE and ZnO can generate electrical signals through piezoelectric/triboelectric effect. At the same time, the surface of the nanostructures can absorb the water molecules, which will influence the electrical output of the device. The device can convert sound energy into electrical output without any external electricity power supply, and the outputting voltage decreases with increasing relative humidity, acting as the sensing signal. The sensor has been integrated with data processing unit and wireless transmission module to form a self-powered wearable intelligent dehydration monitoring system, which can actively monitor the humidity of exhaled breath and transmit the information to the mobile phone. The results can open a possible new direction for the development of sound-driven gas sensors and will further expand the scope for self-powered nanosystems.

High-Performance Flexible Energy Storage Devices Based on Graphene Decorated with Flower-Shaped MoS2 Heterostructures

MoS₂, owing to its advantages of having a sheet-like structure, high electrical conductivity, and benign environmental nature, has emerged as a candidate of choice for electrodes of next-generation supercapacitors. Its widespread use is offset, however, by its low energy density and poor durability. In this study, to overcome these limitations, flower-shaped MoS₂/graphene heterostructures have been deployed as electrode materials on flexible substrates. Three-electrode measurements yielded an exceptional capacitance of 853 F g^-1 at 1.0 A g^-1, while device measurements on an asymmetric supercapacitor yielded 208 F g^-1 at 0.5 A g^-1 and long-term cyclic durability. Nearly 86.5% of the electrochemical capacitance was retained after 10,000 cycles at 0.5 A g^-1. Moreover, a remarkable energy density of 65 Wh kg^-1 at a power density of 0.33 kW kg^-1 was obtained. Our MoS₂/Gr heterostructure composites have great potential for the development of advanced energy storage devices.

Recent Progress in Piezoelectric-Triboelectric Effects Coupled Nanogenerators

Piezoelectric and triboelectric nanogenerators have been widely studied in the past years for their advantages of easy design/manufacturing, small size, and flexibility. Nanogenerators that are developed based on the coupled piezoelectric and triboelectric effects (PTCNG) can make full use of the mechanical energies and achieve both higher output and sensing performance. This review aims to cover the recent research progress of PTCNG by presenting in detail their key technologies in terms of operating principles, integration concept, and performance enhancement strategies, with a focus on their structural simplification and efficiency performance improvement. The latest applications of PTCNG in tactile sensors and energy-harvesting system are also illustrated. Finally, we discuss the main challenges and prospects for the future development of PTCNG, hoping that this work can provide a new insight into the development of all-in-one mechanical energy-scavenging and sensing devices.

In-Situ Assembly of MoS2 Nanostructures on EHD-Printed Microscale PVDF Fibrous Films for Potential Energy Storage Applications

Three-dimensional (3D) printing has been widely utilized to fabricate free-standing electrodes in energy-related fields. In terms of fabrication, the two most challenging limitations of 3D printed electrodes are the poor printing resolution and simple structural dimension. Here we proposed a novel process to fabricate molybdenum disulfide-polyvinylidene fluoride (MoS₂-PVDF) hierarchical electrodes for energy storage applications. The 20-layer microscale PVDF films with a stable fiber width of 8.3 ± 1.2 μm were fabricated by using electrohydrodynamic (EHD) printing. MoS₂ nanostructures were synthesized and assembled on the microscale PVDF fibers by using hydrothermal crystal growth. The structural and material investigations were conducted to demonstrate the geometrical morphology and materials component of the composite structure. The electrochemical measurements indicated that the MoS₂-PVDF electrodes exhibited the typical charge-discharge performance with a mass specific capacitance of 60.2 ± 4.5 F/g. The proposed method offers a facile and scalable approach for the fabrication of high-resolution electrodes, which might be further developed with enhanced specific capacitance in energy storage fields.

Nickel sulfide nanorods decorated on graphene as advanced hydrogen evolution electrocatalysts in acidic and alkaline media

Nowadays, the fabrication of robust and earth-abundant hydrogen evolution electrocatalysts with noble-metal-like catalytic activities is still facing great challenges. In this report, nanorod (NR)-shaped nickel sulfide (NiS) is successfully decorated on graphene (Gr) by utilizing carbon cloth (CC) as a substrate (NiS-Gr-CC). Benefiting from the NR morphology and strong interfacial synergetic effect between NiS and Gr, the NiS-Gr-CC electrocatalyst shows good catalytic activity for hydrogen evolution reaction (HER). Specifically, the low Tafel slopes of 46 and 56 mV dec^-1 along with the small overpotentials of 66 and 71 mV at 10 mA cm^-2 are obtained in the acidic and alkaline electrolytes, respectively. Density functional theory results indicate that the combination of NiS and Gr can optimize the adsorption energy of H* during the HER process. The long-term durability measurement result reveals that our NiS-Gr-CC heterostructure has good electrocatalytic cycling stability (∼80 h) in both acidic and alkaline electrolytes. These results confirm that the NiS-Gr-CC heterostructure is a promising candidate for hydrogen evolution electrocatalyst with high catalytic activity.

Recent progress on polyvinylidene difluoride based nanocomposite: Applications in energy harvesting and sensing

Discovered in 2006, Nanogenerators have attracted much attention as promising energy-harvesting devices. It harnesses energy by utilizing piezoelectric, pyroelectric thermoelectric properties of nanomaterials to produce electricity and have potential to...

Self-Poled Poly(vinylidene fluoride)/MXene Piezoelectric Energy Harvester with Boosted Power Generation Ability and the Roles of Crystalline Orientation and Polarized Interfaces

Micropiezoelectric devices have become one of the most competitive candidates for use in self-powered flexible and portable electronic products because of their instant response and mechanic-electric conversion ability. However, achievement of high output performance of micropiezoelectric devices is still a significant and challenging task. In this study, a poly(vinylidene fluoride) (PVDF)/MXene piezoelectric microdevice was fabricated through a microinjection molding process. The synergistic effect of both an intense shear rate (>10⁴ s^-1) as well as numerous polar C-F functional groups in MXene flakes promoted the formation of β-form crystals of PVDF in which the crystallinity of β-form could reach as high as 59.9%. Moreover, the shear-induced shish-kebab crystal structure with a high orientation degree (f_h = ∼0.9) and the stacked MXene acted as the driving force for the dipoles to regularly arrange and produce a self-polarizing effect. Without further polarization, the fabricated piezoelectric microdevices exhibited an open-circuit voltage of 15.2 V and a short-circuit current of 497.3 nA, under optimal conditions (400 mm s^-1 and 1 wt % MXene). Impressively, such piezoelectric microdevices can be used for energy storage and for sensing body motion to monitor exercise, and this may have a positive impact on next-generation smart sports equipment.

Recent developments of hybrid piezo-triboelectric nanogenerators for flexible sensors and energy harvesters

Hybrid piezo-triboelectric nanogenerators constitute a new class of self-powered systems that exploit the synergy of piezoelectric and triboelectric mechanisms to improve energy harvesting efficencies and address the energy and power needs of portable and wearable electronic devices. The unique, synergistic electrical coupling mechanisms of piezoelectric and triboelectric effects increase the electric outputs and energy conversion efficiency of hybrid generators to beyond a linear summation of the contributions from individual triboelectric and piezoelectric mechanisms. Due to their large surface-area-to-volume ratios and outstanding mechanical, electronic and thermal properties, nanomaterials are favourable building blocks for constructing hybrid nanogenerators and represent a large family of flexible energy harvesting electronic structures and devices. Herein, we review the recent advances of hybrid piezo-triboelectric nanogenerators, with a particular focus on microstructure design, synergy mechanisms, and future research opportunities with significant potential for physiological monitoring, health care applications, transportation, and energy harvesting. The main strategies for improving electrical output performance are identified and examined, including novel nanostructures for increasing the contact area of the triboelectric pair, and nano-additives for enhancing the surface potential difference between the triboelectric pair and piezoelectric layers. Future applications and commercialization opportunities of these nanogenerators are also reviewed.

Large-Scale Lever-Based Triboelectric Nanogenerator for Sensing Lateral Vibration and Wrist or Finger Bending for Controlling Shooting Game

With advances in internet of things technology and fossil fuel depletion, energy harvesting has emerged rapidly as a means of supplying small electronics with electricity. As a method of enhancing the electrical output of the triboelectric nanogenerator, specialized for harvesting mechanical energy, structural modification to amplify the input force is receiving attention due to the limited input energy level. In this research, a lever structure was employed for delivering the amplified input force to a triboelectric nanogenerator. With structural optimization of a 2.5 cm : 5 cm distance ratio of the first and second parts using two lever structures, the highest electrical outputs were achieved: a V_OC of 51.03 V, current density of 3.34 mA m⁻², and power density of 73.5 mW m⁻² at 12 MΩ in the second part. As applications of this triboelectric generator, a vertical vibration sensor and a wearable reloading trigger in a gun shooting game were demonstrated. The possibility for a wearable finger bending sensor with low-level input was checked using a minimized device. Enhanced low-detection limit with amplified input force from the structural advantage of this lever-based triboelectric nanogenerator device can expand its applicability to the mechanical trigger for wearable electronics.

Graphene-assisted barium titanate improves piezoelectric performance of biopolymer scaffold

Biopolymer scaffold is expected to generate electrical stimulation, aiming to mimic an electrical microenvironment to promote cell growth. In this work, graphene and barium titanate (BT) was introduced into selective laser sintered poly-l-lactic acid (PLLA) scaffold. BT as one piezoelectric ceramic was used as the piezoelectric source, whereas graphene served as superior conductive filler. Significantly, the incorporated graphene enhanced the electrical conductivity and thereby increased the electric field strength applied on BT nanoparticles during poling. In this case, more electric domain within BT rearranged along the poling field direction, thus promoting the piezoelectric response of the composites. Results showed that the PLLA/BT/graphene scaffold exhibited relatively high output voltage of 1.4 V and current of 10 nA. Cells tests proved that these electrical signals considerably promoted cell proliferation and differentiation. Moreover, the scaffold exhibited improved mechanical properties due to the rigid particle enhancement effect and increased crystallinity.

Flexible Supercapacitor-Type Rectifier-free Self-Charging Power Unit Based on a Multifunctional Polyvinylidene Fluoride-ZnO-rGO Piezoelectric Matrix

The development of an effective mechanical to electrical energy conversion device and its functional integration with an energy storage device for self-powered portable gadgets are cutting-edge research fields. However, the generated power and the mechanical stability of these integrated devices are still not efficient to power up portable electronics. We fabricated a rectifier-free piezoelectric nanogenerator (NG) integrated with a supercapacitor (SC). A multifunctional composite matrix was prepared by the incorporation of ultrathin (<10 nm) ZnO nanoflakes and reduced graphene oxide in polyvinylidene fluoride to enhance the piezoelectric output characteristics and mechanical stability of the device while minimizing the additional energy losses during the integration. The as-fabricated SC-based power unit through the energy conversion and storage processes showed a remarkable self-charging performance. We obtained the maximum output voltage, current density, and power density of about 44 V, 1000 nA cm^-2, and 193.6 μW cm^-2 under the applied mechanical force of 10 N, respectively. The self-charging behavior of the device showed that it can store 1.5 × 10^-3 mC within 100 s without resorting to a rectifier. We obtained the total energy density of about 10.34 mW h kg^-1 under palm impact. Our results present a step forward in the development of the NG and SC-based flexible and self-charging devices.

A triboelectric nanogenerator based on cosmetic fixing powder for mechanical energy harvesting

In this work, we use commercial powder particulates (a cosmetic fixing powder) as triboelectric materials for constructing a triboelectric nanogenerator (CFP-TENG). Through finger pressing, the CFP-TENG generated approximate open-circuit voltage, short-circuit current, and maximum power density values of 1141 V, 521 µA, and 570.96 μW/cm², respectively. Thirty-seven commercial blue LEDs can be easily lit up by the CFP-TENG. Moreover, this TENG, which was designed as a novel palette structure for harvesting mechanical energy from bicycle motion, serves as a self-powered bicycle speed sensor. In addition, the cosmetic fixing powder can be used as an effective material to enhance the triboelectric property of skin. This study provides an effective method for developing a cost-effective TENG without the use of complex surface micro-/nano-texturing.

Ultrahigh Output Piezoelectric and Triboelectric Hybrid Nanogenerators Based on ZnO Nanoflakes/Polydimethylsiloxane Composite Films

We demonstrated a hybrid nanogenerator (NG) exploiting both piezoelectric and triboelectric effects induced from ZnO nanoflakes (NFs)/polydimethylsiloxane (PDMS) composite films through a facile, cost-effective fabrication method. This hybrid NG exhibited not only high piezoelectric output current owing to the enhanced surface piezoelectricity of the ZnO NFs but also high triboelectric output voltage owing to the pronounced triboelectrification of Au-PDMS contact, producing a peak-to-peak output voltage of ∼470 V, a current density of ∼60 μA·cm^-2, and an average power density of ∼28.2 mW·cm^-2. Without additional energy storage devices, the hybrid NGs with an area of 3 × 3 cm² instantaneously lit up 180 commercial green light-emitting diodes through periodic hand compression. This approach may provide an innovative design for constructing high-performance and portable energy harvesting devices with enhanced power output, scavenging ambient mechanical energy from human motions in our daily life.