One-Pot Template-Free Strategy toward 3D Hierarchical Porous Nitrogen-Doped Carbon Framework in Situ Armored Homogeneous NiO Nanoparticles for High-Performance Asymmetric Supercapacitors

A novel composite electrode with multiple pore structures for efficient treatment of heavy metal ions in capacitive deionization

Multiple porous carbon materials have great promise and potential in the capacitive deionization (CDI) field. Specific surface area (SSA), pore size distribution, and preparation method of CDI electrode materials are essential for the treatment of heavy metal ions. In this work, PPy composited porous carbon electrodes (hypercrosslinked polymers/polypyrrole, HCPs/PPy) were obtained by one-step crosslinked carbonization preparation and electro-deposition. The diverse pore structure gives the composite electrode a large SSA and excellent adsorption performance. HCPs/PPy-4 gives a high SSA of 251.26 m2/g. In the CDI process, the adsorption capacity of HCPs/PPy-4 for Fe3+, Cu2+, Pb2+, and Ag+ is 20.69 mg/g, 37.81 mg/g, 26.86 mg/g, and 40.95 mg/g. The negative electrode recoveries for the adsorption of the four ions were reached 81.2%, 89.2%, 85.5%, and 100%, respectively. It indicates that HCPs/PPy is a novel and potentially porous carbon electrode for high-performance CDI.

Robust Graphene-based Aerogel for Integrated 3D Asymmetric Supercapacitors with High Energy Density

Three-dimensional asymmetric supercapacitors (3D ASC) have garnered significant attention due to their high operating window, theoretical energy density, and circularity. However, the practical application of 3D electrode materials is limited by brittleness and excessive dead volume. Therefore, we propose a controlled contraction strategy that regulates the pore structure of 3D electrode materials, eliminates dead volume in the 3D skeleton structure, and enhances mechanical strength. In this study to obtain reduced graphene oxide/manganese dioxide (rGO/MnO2) and reduced graphene oxide/carbon nanotube (rGO/CNT) composite aerogels with a stable and compact structure. MnO2 and CNT as nanogaskets, preventing the self-stacking of graphene nanosheets during the shrinkage process. Additionally, the high specific capacitor nanogaskets significantly enhance the specific energy density of the rGO aerogel electrode. The prepared rGO/MnO2//rGO/CNT 3D ASC exhibits a high mass-specific capacitance of 216.15 F g-1, a high mass energy density of 74 Wh kg-1 at 3.5 A g-1, and maintains a retention rate of capacitance at 99.89 % after undergoing 10,000 cycles of charge and discharge at 5 A g-1. The versatile and integrated assembly of 3D ASC units is achieved through the utilization of the robust mechanical structure of rGO-based aerogel electrodes, employing a mortise and tenon structural design.

ZIF-67 MOF-Derived Mn3O4 @ N-Doped C as a Supercapacitor Electrode in Different Alkaline Media

Transition-metal oxide has been identified as an auspicious material for supercapacitors due to its exceptional capacity. The inadequate electrochemical characteristics, such as prolonged cycle stability, can be ascribed to factors, such as low electrical conductivity, sluggish reaction kinetics, and a deficiency of active sites. The transition-metal oxides derived from the MOF materials offer a larger surface area with enriched active sites and a faster reaction rate along with good electrical conductivity. The manganese (Mn)-based metal-organic framework (MOF)-derived materials were produced using the pyrolysis method. Zeolitic imidazolate frameworks (ZIF-67) were fabricated in water at ambient temperature with the aid of triethylamine. Multiple techniques were used to examine the characteristics of the fabricated electrode materials. The influence of the electrolyte on the electrochemical activity of the Mn3O4@N-doped C electrode materials was determined in KOH, NaOH, and LiOH. For manufacturing of "Mn3O4@N-doped C", ZIF-67 was used as a precursor. The capacitive performance of the Mn3O4@N-doped C electrode increased as a result of nitrogen-doped carbon; after 5000th cycles, the electrode retained an excellent rate capability and a high specific capacitance (Cs) of 980 F g-1 at 1 A g-1 under 2.0 KOH electrolyte in a three electrode system. The carbonized manganese oxide displays also had a high Cs of 686 F g-1 in two electrode systems in 2.0 M KOH. Materials made from MOFs show promise as capacitive materials for applications in energy conversion storage owing to their straightforward synthesis and strong electrochemical performance.

Electrospray Deposition of PEDOT:PSS on Carbon Yarn Electrodes for Solid-State Flexible Supercapacitors

The increasing demand for flexible electronic devices has risen due to the high interest in electronic textiles (e-textiles). Consequently, the urge to power e-textiles has sparked enormous interest in flexible energy storage devices. One-dimensional (1D) configuration supercapacitors are the most promising technology for textile applications, but often their production involves complex synthesis techniques and expensive materials. This work unveils the use of the novel electrospray deposition (ESD) technique for the deposition of poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT:PSS). This deposition methodology on conductive carbon yarns creates flexible electrodes with a high surface area. The deposition conditions of PEDOT:PSS were optimized, and their influence on the electrochemical performance of a 1D symmetric supercapacitor with a cellulose-based gel as an electrolyte and a separator was evaluated. The tests herein reported show that these capacitors exhibited a high specific capacitance of 72 mF g^-1, an excellent cyclability of more than 85% capacitance retention after 1500 cycles, and an outstanding capability of bending.

Self-Promoting Energy Storage in Balsa Wood-Converted Porous Carbon Coupled with Carbon Nanotubes

For most electrodes fabricated with carbon, transition metal compounds, or conductive polymers, the capacitance may deteriorate with cyclic charging and discharging. Thus, an electrochemically stable supercapacitor has long been pursued by researchers. In this work, the hierarchical structure of balsa wood is preserved in the converted carbon which is used as a supporting framework to fabricate electrodes for supercapacitors. Well-grown carbon nanotubes (CNTs) on interior and exterior surfaces of balsa carbon channels provide two advantages including 1) offering more specific surface area to boost capacitance via electric double layer capacitance and 2) offering more active Fe and Ni sites to participate in the redox reaction to enhance capacitance of the balsa carbon/CNTs electrode. The balsa carbon/CNTs demonstrate an excellent area capacitance of 1940 mF cm^-2 . As active sites on Ni and Fe catalysts and inner walls of CNTs are gradually released, the capacitance increases 66% after 4000 charge-discharge cycles. This work brings forward a strategy for the rational design of high-performance biomass carbon coupled with advanced nanostructures for energy storage.

Nitrogen- and Oxygen-Containing Three-Dimensional Hierarchical Porous Graphitic Carbon for Advanced Supercapacitor

Three-dimensional hierarchical porous graphitic carbon (HPGC) were synthesized via one-step carbonization-activation and a catalytic strategy. The method can not only improve the graphitization degree of carbon materials, but also offer plentiful interfaces for charge accumulation and short paths for ion/electron transport. Polypyrrole, potassium hydroxide, and nickel acetate were used as the carbon precursors, activating agent, and catalyst, respectively. The retraction and dissolution of Ni caused the change of pore size in the material and led to the interconnected micro/nano holes. Nickel acetate played a significant role in enhancing the electrical conductivity, introducing pseudocapacitance, and promoting ion diffusion. In the supercapacitor, HPGC electrode exhibited a remarkable specific capacitance of 336.3 F g⁻¹ under 0.5 A g⁻¹ current density and showed high rate capability, even with large current densities applied (up to 50 A g⁻¹). Moreover, HPGC showed optimal cycling stability with 97.4% capacitance retention followed by 3000 charge-discharge cycles. The excellent electrochemical performances coupled with a facile large-scale synthesis procedure make HPGC a promising alternative for supercapacitors.

3D hierarchical porous nitrogen-doped carbon/Ni@NiO nanocomposites self-templated by cross-linked polyacrylamide gel for high performance supercapacitor electrode

Three-dimensional nitrogen-doped carbon network incorporated with nickel@nickel oxide core-shell nanoparticles composite (3D NC/Ni@NiO) has been facilely prepared, self-templated by the cross-linked polyacrylamide aerogel precursor containing NiCl₂. Characterizations reveal that the Ni@NiO nanoparticles distribute homogeneously in the 3D nitrogen-doped carbon matrix and the composite is of hierarchical porous structure. When used as supercapacitor electrode in a three-electrode system, the 3D NC/Ni@NiO exhibits enhanced electrical conductivity and excellent electrochemical performance, presenting a high specific capacitance (389F g^-1 at 5 mV s^-1), good rate capability (276 F g^-1 at 100 mV s^-1) and outstanding cycling performance (with the capacitance retention of 70.2% after 5000 charge-discharge cycles). This is due to the synergistic effects of conductive metallic nickel, pseudocapacitive nickel oxide as well as in situ nitrogen doping of carbon network. Moreover, an asymmetric supercapacitor (ASC) was fabricated with NC/Ni@NiO as positive electrode and active carbon as negative electrode. The ASC device exhibits a maximum energy density of 19.4 W h kg^-1 at a power density of 700 W kg^-1 and shows good cycling stability (73.8% capacity retention after 3000 cycles), indicating that it has great promise for practical energy storage and conversion application.

Development of High-Performance Supercapacitor based on a Novel Controllable Green Synthesis for 3D Nitrogen Doped Graphene

3D sponge nitrogen doped graphene (NG) was prepared economically from waste polyethylene-terephthalate (PET) bottles mixed with urea at different temperatures using green approach via a novel one-step method. The effect of temperature and the amount of urea on the formation of NG was investigated. Cyclic voltammetry and impedance spectroscopy measurements, revealed that nitrogen fixation, which affects the structure and morphology of prepared materials improve the charge propagation and ion diffusion. The prepared materials show outstanding performance as a supercapacitor electrode material, with the specific capacitance going up to 405 F g-1 at 1 A g-1. An energy density of 68.1 W h kg-1 and a high maximum power density of 558.5 W kg-1 in 6 M KOH electrolytes were recorded for the optimum sample. The NG samples showed an appropriate cyclic stability with capacitance retention of 87.7% after 5000 cycles at 4 A g-1 with high charge/discharge duration. Thus, the prepared NG herein is considered to be promising, cheap material used in energy storage applications and the method used is cost-effective and environmentally friendly method for mass production of NG in addition to opening up opportunities to process waste materials for a wide range of applications.

Shape-controlled synthesis of porous carbons for flexible asymmetric supercapacitors

N-Doped carbon nanomaterials have gained tremendous research interest in energy storage because of their high capacitance and chemical stability. Here, N-doped porous carbons (NPCs) with multiple shape-controlled and tunable morphologies are developed through a direct one-step pyrolysis/activation method. Typically, NPC-700-1, which is 5 nm thick and 6 μm wide, shows a high surface area (1591.5 m2 g-1) and hierarchical micro-, meso-, and macroporous architecture. The maximum specific capacitance of the as-prepared carbon nanosheets is 406 F g-1 at 1 A g-1 in KOH electrolyte. Moreover, flexible all-solid-state asymmetric supercapacitor devices assembled from NPCs and NiCo2O4 deliver a superior energy density of 42.7 W h kg-1 at 794.6 W kg-1, and good cycling ability (94% after 10 000 cycles). All the results suggest that NPCs have great potential for high performance wearable electronics and energy storage devices.