Graphene Derivative in Magnetically Recoverable Catalyst Determines Catalytic Properties in Transfer Hydrogenation of Nitroarenes to Anilines with 2-Propanol

Effects of oxygen vacancies on hydrogenation efficiency by spillover in catalysts

Hydrogen spillover is crucial for hydrogenation reactions on supported catalysts. The properties of supports have been reported to be very important for affecting hydrogen spillover and the subsequent hydrogenation process. The introduction of oxygen vacancies offers a promising strategy to enhance efficiency of catalysts. Recent advanced characterization and theoretical modeling techniques have provided us with increasing new insights for understanding hydrogen spillover effects. However, a comprehensive understanding of oxygen vacancy effects on hydrogen spillover and hydrogenation efficiency of catalysts is still lacking. This review focuses on the recent advances in support effects especially oxygen vacancy effects on improving the efficiency of catalysts from three process aspects including hydrogen dissociation, active hydrogen spillover, and hydrogenation by spillover. The challenges in studying the effects on hydrogenations by spillover on the supported catalysts are highlighted at the end of the review. It aims to provide valuable strategies for the development of high-performance catalytic hydrogenation materials.

β-Cyclodextrin-Functionalized Fe3O4-Supported Pd-Nanocatalyst for the Reduction of Nitroarenes in Water at Mild Conditions

In this study, a novel heterogeneous catalyst (Fe₃O₄@β-CD@Pd) has been developed by the deposition of palladium nanoparticles on the β-cyclodextrin-functionalized surface of magnetic Fe₃O₄. The catalyst was prepared by a simple chemical co-precipitation method and characterized extensively by using Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma-optical emission spectrometry (ICP-OES) analyses. Herein, the applicability of the prepared material was evaluated for the catalytic reduction of environmentally toxic nitroarenes to the corresponding anilines. The catalyst Fe₃O₄@β-CD@Pd showed excellent efficiency for the reduction of nitroarenes in water under mild conditions. A low catalyst loading of 0.3 mol % Pd is found to be efficient for reducing nitroarenes in excellent to good (99-95%) yields along with high TON values (up to 330). Nevertheless, the catalyst was recycled and reused up to the 5th cycle of reduction of nitroarene without any loss of significant catalytic activity.

Hydrogen Spillover-Accelerated Selective Hydrogenation on WO3 with ppm-Level Pd

Hydrogen spillover from the metal to the support opens a fresh avenue to design dual-active site catalysts for selective hydrogenation. However, very limited knowledge has been obtained to reveal the relationship between the capacity of hydrogen spillover and catalytic performance of hydrogenation. Herein, hydrogen spillover-dependent selective hydrogenation has been demonstrated on WO₃-supported ppm-level Pd (PdHD/WO₃), where the *H species generated and spilled from Pd to WO₃ are readily utilized for addition of a reactant. The WO₃ supports with a hexagonal phase and a suitable oxygen defect concentration can enhance the capacity of hydrogen spillover, significantly accelerating the catalytic activity of PdHD/WO₃. For the hydrogenation of 4-chloronitrobenzene, the PdHD/WO₃ catalysts with the highest capacity of hydrogen spillover yielded a turnover frequency (TOF) of 47,488 h^-1 (33 times higher than that of traditional Pd/C). Meanwhile, benefiting from the hydrogen spillover, the unique adsorption of 4-chloronitrobenzene via the nitro group on the oxygen vacancy of WO₃ guaranteed >99.9% selectivity of 4-chloroaniline during the whole hydrogenation. This work thus helps to create an effective method for fabricating cost-effective nanocatalysts with an extremely low Pd loading for the ideal hydrogenation with extremely high activity and selectivity.

Nanocarbon-based catalysts for selective nitroaromatic hydrogenation: A mini review

Selective hydrogenation of nitroaromatics to the corresponding anilines is a key topic for research in fine chemical industrial fields. Nanocarbon materials with good chemical stability, high electrical conductivity, and good mechanical performance have been regarded as promising candidates in the catalytic field, and have shown a wide range of applications in recent years. Controllable synthesis on the structure, morphology, and active sites of nanocarbon-based catalysts is vital to the development of highly efficient catalysts. In this mini-review, we summarize the recent progresses of nanocarbon materials by focusing on the synthesis approaches and their corresponding nanostructures, including carbon nanofibers, carbon nanotubes, graphene, porous carbon, carbon spheres, and metal organic framework-derived carbon materials. The design and catalytic performance of these nanocarbon materials have been systematically discussed. Finally, the emerging challenges and future prospective for developing advanced nanocarbon-based catalysts are outlined.

Reductive Alkylation of Azides and Nitroarenes with Alcohols: A Selective Route to Mono- and Dialkylated Amines

Herein, we demonstrated an efficient protocol for reductive alkylation of azides/nitro compounds via a borrowing hydrogen (BH) method. By following this protocol, selective mono- and dialkylated amines were obtained under mild and solvent-free conditions. A series of control experiments and deuterium-labeling experiments were performed to understand this catalytic process. Mechanistic studies suggested that the Ir(III)-H was the active intermediate in this reaction. KIE study revealed that the breaking of the C-H bond of alcohol might be the rate-limiting step. Notably, this solvent-free strategy disclosed a high TON of around 5600. Based on kinetic studies and control experiments, a metal-ligand cooperative mechanism was proposed.

Rational Design of Self-Supported CuO x -Decorated Composite Films as an Efficient and Easy-Recycling Catalyst for Styrene Oxidation

The applications of graphene-based materials in catalysis are limited by their strong tendency to aggregate, which may lead to a decrease in active sites. Herein, we propose a facile and controllable strategy to fabricate a series of heterogeneous catalysts with a unique nanostructure wherein CuO _x -decorated reduced graphene oxide (rGO) sheets are incorporated into a solid matrix composed of poly(vinylpyrrolidone) (PVP) and carboxymethyl cellulose (CMC). The resultant materials are self-supported films and could be directly used as catalysts for the liquid-phase oxidation of styrene without the requirement for extra substrates. The employment of PVP-CMC (PC) as the support for CuO _x -decorated rGO sheets successfully inhibits their aggregation. Benefiting from the dispersion of copper species, these films exhibit good catalytic activity and recyclability under mild reaction conditions. Especially, they can be conveniently removed from the reaction mixture by tweezers due to their structural stability. For catalyzing multiple reactions with high efficiency and facile recyclability, this study offers a universal strategy to design heterogeneous catalysts based on graphene materials and provides a promising platform.

Chitosan as capping agent in a robust one-pot procedure for a magnetic catalyst synthesis

Here, we report a one-pot solvothermal method for the development of magnetically recoverable catalysts with Ru or Ag nanoparticles (NPs) capped by chitosan (CS), a derivative of natural chitin. The formation of iron oxide NPs was carried out in situ in the presence of CS and iron acetylacetonate in boiling triethyleneglycol (TEG) due to CS solubilization in warm TEG. Coordination with Ru or Ag species and the NP formation take place in the same reaction solution, eliminating intermediate steps. In optimal conditions the method developed allows stabilization of 2.2 nm monodisperse Ru NPs (containing both Ru⁰ and Ru⁴⁺ species) that are evenly distributed through the catalyst, while for Ag NPs, this stabilizing medium is inferior, leading to exceptionally large Ag nanocrystals. Catalytic testing of CS-Ru magnetically recoverable catalysts in the reduction of 4-nitrophenol to 4-aminophenol with excess NaBH₄ revealed that the catalyst with 2.2 nm Ru NPs exhibits the highest catalytic activity compared to samples with larger Ru NPs (2.9-3.2 nm). Moreover, this catalyst displayed extraordinary shelf-life in the aqueous solution (up to ten months) and excellent reusability in ten consecutive reactions with easy magnetic separation at each step which were assigned to its conformational rigidity at a constant pH. These characteristics as well as favorable environmental factors of the catalyst fabrication, make it promising for nitroarene reduction.

Iron-catalyzed one-pot synthesis of quinoxalines: transfer hydrogenative condensation of 2-nitroanilines with vicinal diols

Here, we report iron-catalyzed one-pot synthesis of quinoxalines via transfer hydrogenative condensation of 2-nitroanilines with vicinal diols. The tricarbonyl (η4-cyclopentadienone) iron complex, which is well known as the Knölker complex, catalyzed the oxidation of alcohols and the reduction of nitroarenes, and the corresponding carbonyl and 1,2-diaminobenzene intermediates were generated in situ. Trimethylamine N-oxide was used to activate the iron complex. Various unsymmetrical and symmetrical vicinal diols were applied for transfer hydrogenation, resulting in quinoxaline derivatives in 49-98% yields. A plausible mechanism was proposed based on a series of control experiments. The major advantages of this protocol are that no external redox reagents or additional base is needed and that water is liberated as the sole byproduct.

Dendrons containing boric acid and 1,3,5-tris(2-hydroxyethyl)isocyanurate covalently attached to silica-coated magnetite for the expeditious synthesis of Hantzsch esters

A new multifunctional dendritic nanocatalyst containing boric acid and 1,3,5-tris(2-hydroxyethyl)isocyanurate covalently attached to core-shell silica-coated magnetite (Fe3O4@SiO2@PTS-THEIC-(CH2)3OB(OH)2) was designed and properly characterized by different spectroscopic or microscopic methods as well as analytical techniques used for mesoporous materials. It was found that the combination of both aromatic π-π stacking and boron-oxygen ligand interactions affords supramolecular arrays of dendrons. Furthermore, the use of boric acid makes this dendritic catalyst a good choice, from corrosion, recyclability and cost points of view. The catalytic activity of Fe3O4@SiO2@PTS-THEIC-(CH2)3OB(OH)2, as an efficient magnetically recoverable catalyst, was investigated for the synthesis of polyhydroacridines (PHAs) as well as polyhydroquinolines (PHQs) via one-pot multicomponent reactions of dimedone and/or ethyl acetoacetate, different aldehydes and ammonium acetate in EtOH under reflux conditions. Very low loading of the catalyst, high to quantitative yields of the desired PHAs or PHQs products, short reaction times, wide scope of the substrates, eliminating any toxic heavy metals or corrosive reagents for the modification of the catalyst, and simple work-up procedure are remarkable advantages of this green protocol. An additional advantage of this magnetic nanoparticles catalyst is its ability to be separated and recycled easily from the reaction mixture with minimal efforts in six subsequent runs without significant loss of its catalytic activity. This magnetic and dendritic catalyst can be extended to new two- and three-dimensional covalent organic frameworks with different applications.

Pd Catalyst Based on Hyperbranched Polypyridylphenylene Formed In Situ on Magnetic Silica Allows for Excellent Performance in Suzuki-Miyaura Reaction

Here, for the first time, we developed a catalytic composite by forming a thin layer of a cross-linked hyperbranched pyridylphenylene polymer (PPP) on the surface of mesoporous magnetic silica (Fe₃O₄-SiO₂, MS) followed by complexation with Pd species. The interaction of Pd acetate (PdAc) with pyridine units of the polymer results in the formation of Pd²⁺ complexes which are evenly distributed through the PPP layer. The MS-PPP-PdAc catalyst was tested in the Suzuki-Miyaura cross-coupling reaction with four different para-Br-substituted arenes, demonstrating enhanced catalytic properties for substrates containing electron withdrawing groups, and especially, for 4-bromobenzaldehyde. In this case, 100% selectivity and conversion were achieved with TOF of >23 000 h^-1 at a very low Pd loading (0.032 mol %), a remarkable performance in this reaction. We believe these exceptional catalytic properties are due to the hyperbranched polymer architecture, which allows excellent stabilization of catalytic species as well as a favorable space for reacting molecules. Additionally, the magnetic character of the support allows for easy magnetic separation during the catalyst synthesis, purification, and reuse, resulting in energy and materials savings. These factors and excellent reusability of MS-PPP-PdAc in five consecutive uses make this catalyst promising for a variety of catalytic reactions.

Amorphous Flowerlike Goethite FeOOH Hierarchical Supraparticles: Superior Capability for Catalytic Hydrogenation of Nitroaromatics in Water

Fabrication of anilines from the corresponding nitroaromatics is a hot topic both for academia and for industry; however, conducting this protocol in water over a noble-metal-free catalytic system is still a great challenge. Continuous efforts are being made on exploiting novel catalysts for this transformation. In this work, we developed a scalable method for synthesizing the uniform flowerlike amorphous α-FeOOH hierarchical supraparticles. The well-defined amorphous α-FeOOH was prepared through an environmentally benign method, which is hydrolysis of the self-assembled iron glycolate at room temperature. Compared with other iron-only catalysts, this flowerlike amorphous α-FeOOH hierarchical supraparticle catalyst exhibits the best performance in the catalytic reduction of nitroaromatics to corresponding anilines by using water as the reaction solvent (turn over frequency is 106 h^-1 for 4-nitrophenol in water). The further results indicated that the amorphous structure, special nanostructures, and adsorption-desorption synergy offered excellent activity. The kinetics study shows that the reduction of 4-nitrophenol is first order for α-FeOOH, and the apparent active energy E_a is 75.9 kJ mol^-1. Furthermore, this catalyst can be used for eight times without obvious catalytic activity loss. We believe that this novel flowerlike amorphous α-FeOOH hierarchical supraparticle catalyst is a milestone in the reduction of nitro compounds.

Magnetically Recoverable Catalysts: Beyond Magnetic Separation

Here, we discuss several important aspects of magnetically recoverable catalysts which can be realized when magnetic oxide nanoparticles are exposed to catalytic species and catalytic reaction media. In such conditions magnetic oxides can enhance performance of catalytic nanoparticles due to (i) electronic effects, (ii) catalyzing reactions which are beneficial for the final reaction outcome, or (iii) providing a capacity to dilute catalytic metal oxide species, leading to an increase of oxygen vacancies. However, this approach should be used when the magnetic oxides are stable in reaction conditions and do not promote side reactions. Incorporation of another active component, i.e., a graphene derivative, in the magnetically recoverable catalyst constitutes a smart design of a catalytic system due to synergy of its components, further enhancing catalytic properties.