Highly Stable and NIR Luminescent Ru-LPMSN Hybrid Materials for Sensitive Detection of Cu2+ in Vivo

Selective detection of copper (II) dynamics in living cells and mice with diverse metabolic dysfunction-associated steatotic liver disease using a turn-on bioluminescent probe

Copper is a vital micronutrient that plays a critical role in regulating ecological balance and human physiology. However, excess of copper can have deleterious effects on human health, potentially causing severe diseases, including genetic disorders, neurodegenerative diseases and cancers. Consequently, the development of sensitive and selective probes for the accurate detection of free copper (II) ions (Cu2 +) is imperative for the early diagnosis of Cu-related diseases. In this study, we have developed a turn-on bioluminescent probe, Luc-Cu, for the detection and imaging of Cu2+in vitro and in vivo. In vitro tests demonstrated that Luc-Cu was capable of selectively detecting Cu2+ with a 0.35 μM limit of detection. Moreover, Luc-Cu was successfully employed for imaging Cu2+ in living cells and tumor-bearing mice. Notably, Luc-Cu has been utilized for the monitoring of Cu2+ variation in the livers of mice across diverse stages of metabolic dysfunction-associated steatotic liver disease (MASLD). The exceptional analytical performance of Luc-Cu suggests its potential as a promising and effective imaging tool for the sensitive diagnosis of Cu2+-related diseases with high sensitivity.

Engineering a Ru(ii) Nanostructure for Oxygen-Free Photocatalytic Degradation of Environmental Pollutants

The development of high-performing photocatalysts with visible-light-absorbing and oxidative properties for the degradation of organic contaminants in anaerobic microenvironments remains a challenge. Herein, a Ru-complex decorated with coumarin ([Ru(phen)2Cur]Cl2) molecules was created to achieve high absorption capacities and photocatalytic activity. Taking advantage of the nanoparticulate structure, the transformation of [Ru(phen)2Cur]Cl2 molecules into Ru(II) nanostructures (RuCur NPs) not only exhibited an extensive broad visible-light absorption spectrum but also possessed enhanced intersystem crossing efficiency and improved electron transfer. Consequently, these self-assembled nanocatalysts performed efficient photodegradation toward both antibiotics and organic dyes, especially in acidic and anaerobic environments. Mechanistically, photoactivated electrons and holes on the surface of nanostructures drive the degradation of organic molecules via direct redox reactions in an oxygen-independent manner. This result proposed a fundamental insight for developing oxygen-independent nanoparticulate photocatalysts.

Shining New Light on Biological Systems: Luminescent Transition Metal Complexes for Bioimaging and Biosensing Applications

Luminescence imaging is a powerful and versatile technique for investigating cell physiology and pathology in living systems, making significant contributions to life science research and clinical diagnosis. In recent years, luminescent transition metal complexes have gained significant attention for diagnostic and therapeutic applications due to their unique photophysical and photochemical properties. In this Review, we provide a comprehensive overview of the recent development of luminescent transition metal complexes for bioimaging and biosensing applications, with a focus on transition metal centers with a d6, d8, and d10 electronic configuration. We elucidate the structure-property relationships of luminescent transition metal complexes, exploring how their structural characteristics can be manipulated to control their biological behavior such as cellular uptake, localization, biocompatibility, pharmacokinetics, and biodistribution. Furthermore, we introduce the various design strategies that leverage the interesting photophysical properties of luminescent transition metal complexes for a wide variety of biological applications, including autofluorescence-free imaging, multimodal imaging, organelle imaging, biological sensing, microenvironment monitoring, bioorthogonal labeling, bacterial imaging, and cell viability assessment. Finally, we provide insights into the challenges and perspectives of luminescent transition metal complexes for bioimaging and biosensing applications, as well as their use in disease diagnosis and treatment evaluation.

Kinetic detection of hydrogen peroxide in single horseradish peroxidase-concentrated silica particle using confocal fluorescence microspectroscopic measurement

In the present study, we propose a scheme for detecting H2O2 by using horseradish peroxidase (HRP) adsorbed onto single silica particles and fluorescence microspectroscopy. When the silica particles were immersed in an HRP solution, the HRP concentration in the silica particles increased by a factor of 690 compared to that in the bulk aqueous solution because HRP was adsorbed on the silica surface. When a single particle containing HRP was added to a mixed solution of H2O2 and Amplex Red, fluorescence from resorufin, which was produced by the reaction of HRP, H2O2, and Amplex Red, was observed. The fluorescence from the resorufin in the particles increased after a single particle was added to the solution, and the release of resorufin was observed. As the concentration of H2O2 (CH2O2) decreased, the time it takes for fluorescence intensity to reach its maximum was shorter. The detection limit for H2O2 in the present system was 980 nM. The reaction behavior of a single silica particle was evaluated using a spherical diffusion model, which explains the approximate concentration change of resorufin in the silica particle. The proposed method has the advantages of simple sample preparation and detection, low sample consumption, and a short detection time.

Fluorogen-Functionalized Mesoporous Silica Hybrid Sensing Materials: Applications in Cu2+ Detection

Since Cu2+ ions play a pivotal role in both ecosystems and human health, the development of a rapid and sensitive method for Cu2+ detection holds significant importance. Fluorescent mesoporous silica materials (FMSMs) have garnered considerable attention in the realm of chemical sensing, biosensing, and bioimaging due to their distinctive structure and easily functionalized surfaces. As a result, numerous Cu2+ sensors based on FMSMs have been devised and extensively applied in environmental and biological Cu2+ detection over the past few decades. This review centers on the recent advancements in the methodologies for preparing FMSMs, the mechanisms underlying sensing, and the applications of FMSMs-based sensors for Cu2+ detection. Lastly, we present and elucidate pertinent perspectives concerning FMSMs-based Cu2+ sensors.

Fluorescent Sensors for Detecting and Imaging Metal Ions in Biological Systems: Recent Advances and Future Perspectives

Metal ions play a crucial role in many biochemical processes, and when in a state of scarcity or surplus, they can lead to various diseases. Therefore, the development of a selective, sensitive, cost-effective, and fast-responding sensor to detect metal ions is critical for in vitro medical diagnostics. In recent years, fluorescent sensors have been extensively investigated as potent kits for the effective assessment of metal ions in living systems due to their high sensitivity, selectivity, ability to perform real-time, non-invasive monitoring, and versatility. This review is an overview of recent advances in fluorescent sensors for the detection and imaging of metal ions in biosystems from 2018 to date. Specifically, we discuss their application in detecting essential metal ions and non-essential metal ions for in vitro diagnostics, living cell imaging, and in vivo imaging. Finally, we summarize remaining challenges and offer a future outlook on the above topics.

Base-free synthesis of benchtop stable Ru(III)-NHC complexes from RuCl3·3H2O and their use as precursors for Ru(II)-NHC complexes

A series of Ru(III)-NHC complexes, identified as [Ru^III(PyNHC^R)(Cl)₃(H₂O)] (1a-c), have been prepared, starting from RuCl₃·3H₂O following a base-free route. The Lewis acidic Ru(III) centre operates via a halide-assisted, electrophilic C-H activation for carbene generation. The best results were obtained with azolium salts having the I^- anion, while ligand precursors with Cl^-, BF₄^-, and PF₆^- gave no complex formation and those with Br^- gave a product with mixed halides. The structurally simple, air and moisture-stable complexes represent rare examples of paramagnetic Ru(III)-NHC complexes. Furthermore, these benchtop stable Ru(III)-NHC complexes were shown to be excellent metal precursors for the synthesis of new [Ru^II(PyNHC^R)(Cl)₂(PPh₃)₂] (2a-c) and [Ru^II(PyNHC^R)(CNC^Me)I]PF₆ (3a-c) complexes. All the complexes have been characterised using spectroscopic methods, and the structures of 1a, 1b, 2c, and 3a have been determined using the single-crystal X-ray diffraction technique. This work allows easy access to new Ru-NHC complexes for the study of new properties and novel applications.

Relay detection of Cu2+ and bovine serum albumin by a dansyl derivative-based fluorescent probe

A dansyl derivative-based fluorescent probe, namely, DGly, was developed for relay detection of Cu²⁺ and bovine serum albumin (BSA) with high selectivity and sensitivity. The fluorescence intensity of DGly at 540 nm displayed "on-off-on" phenomenonafter Cu²⁺ and BSA were added in sequence. Correspondingly, the solution color changed from yellow to dark and then to yellowish white under 365 nm UV light irradiation; thus, the solution could be detected by the naked eye. The association constant of DGly-Cu²⁺ was stronger than that of DGly-BSA and DGly-Cu²⁺-BSA. Hence, BSA was detected after a complex was formed between DGly and Cu²⁺. The relay detection of Cu²⁺ and BSA was not influenced by other competitive interferents, and the detection limits of Cu²⁺ and BSA were 1.32 and 0.26 μM, respectively. Analysis of Cu²⁺ in real water samples validated the detection performance of the method proposed herein; it achieved satisfactory recovery and relative standard deviation values. This work demonstrated that introducing metal ions can be an effective way to improve the sensitivity of BSA detection.

A Ratiometric Selective Fluorescent Probe Derived from Pyrene for Cu2+ Detection

A novel ratiometric Cu2+-selective probe was rationally constructed based on pyrene derivative. Compared to other tested metal ions, the probe presented the selective recognition for Cu2+ which could be detected by a significant turn-on fluorescent response at 393 nm and 415 nm. Under the optimized conditions, a detection limit of 0.16 μM Cu2+ in aqueous media was found. Besides this, a 1:1 metal–ligand complex was confirmed by MS spectra and Job’s plot experiment, and the binding mode was also studied by 1H NMR experiment. Meanwhile, the fluorescence imaging in living cells was performed to detect Cu2+ with satisfactory results.

Fluorescent-based nanosensors for selective detection of a wide range of biological macromolecules: A comprehensive review

Thanks to their unique attributes, such as good sensitivity, selectivity, high surface-to-volume ratio, and versatile optical and electronic properties, fluorescent-based bioprobes have been used to create highly sensitive nanobiosensors to detect various biological and chemical agents. These sensors are superior to other analytical instrumentation techniques like gas chromatography, high-performance liquid chromatography, and capillary electrophoresis for being biodegradable, eco-friendly, and more economical, operational, and cost-effective. Moreover, several reports have also highlighted their application in the early detection of biomarkers associated with drug-induced organ damage such as liver, kidney, or lungs. In the present work, we comprehensively overviewed the electrochemical sensors that employ nanomaterials (nanoparticles/colloids or quantum dots, carbon dots, or nanoscaled metal-organic frameworks, etc.) to detect a variety of biological macromolecules based on fluorescent emission spectra. In addition, the most important mechanisms and methods to sense amino acids, protein, peptides, enzymes, carbohydrates, neurotransmitters, nucleic acids, vitamins, ions, metals, and electrolytes, blood gases, drugs (i.e., anti-inflammatory agents and antibiotics), toxins, alkaloids, antioxidants, cancer biomarkers, urinary metabolites (i.e., urea, uric acid, and creatinine), and pathogenic microorganisms were outlined and compared in terms of their selectivity and sensitivity. Altogether, the small dimensions and capability of these nanosensors for sensitive, label-free, real-time sensing of chemical, biological, and pharmaceutical agents could be used in array-based screening and in-vitro or in-vivo diagnostics. Although fluorescent nanoprobes are widely applied in determining biological macromolecules, unfortunately, they present many challenges and limitations. Efforts must be made to minimize such limitations in utilizing such nanobiosensors with an emphasis on their commercial developments. We believe that the current review can foster the wider incorporation of nanomedicine and will be of particular interest to researchers working on fluorescence technology, material chemistry, coordination polymers, and related research areas.

Fluorescence and Colorimetric Dual-Mode Ratiometric Sensor Based on Zr-Tetraphenylporphyrin Tetrasulfonic Acid Hydrate Metal-Organic Frameworks for Visual Detection of Copper Ions

As a special heavy metal ion, copper ions (Cu²⁺) play an indispensable role in the fields of environmental protection and safety. Their excessive intake not only easily leads to diseases but also affects human health. Therefore, it is particularly important to construct a facile, effective, and highly selective Cu²⁺ probe. Herein, a novel Zr-tetraphenylporphyrin tetrasulfonic acid hydrate (TPPS) metal-organic framework (ZTM) was fabricated using TPPS as the ligand and exhibited strong red fluorescence with a high quantum yield of 12.22%. In addition, we designed a ratiometric fluorescent probe by introducing green fluorescein isothiocyanate (FITC), which was not subject to environmental interference and had high accuracy. When exposed to different amounts of Cu²⁺, the fluorescence emission at 667 nm from ZTMs is remarkably quenched, while that at 515 nm from FITC is enhanced, accompanied by a change in the solutions' fluorescence color from red to green under a UV lamp. Besides, the ZTMs solutions display an excellent ratiometric colorimetric response for Cu²⁺ and produce an obvious color change (from green to colorless) that is visible to the naked eye. The fabricated ZTMs@FITC fluorescent probe exhibits distinguished performance for Cu²⁺ detection with linear ranges of 0.1 to 5 μM and 5 to 50 μM, as well as a low detection limit of 5.61 nM. Moreover, a colorimetric sensor based on ZTMs exhibits a good linear range from 0.1 to 20 μM for Cu²⁺ with the detection limit of 4.96 nM. Furthermore, the dual-signal ratiometric sensor has significant specificity for Cu²⁺ and is successfully applied for monitoring Cu²⁺ in water samples, which proves its practical application value in the environment and biological systems.

Biomimetic Redox-Responsive Mesoporous Organosilica Nanoparticles Enhance Cisplatin-Based Chemotherapy

Cisplatin-based chemotherapy is dominated in several cancers; however, insufficient therapeutic outcomes and systemic toxicity hamper their clinical applications. Controlled release of cisplatin and reducing inactivation remains an urgent challenge to overcome. Herein, diselenide-bridged mesoporous organosilica nanoparticles (MON) coated with biomimetic cancer cell membrane were tailored for coordination responsive controlled cisplatin delivery and GSH depletion to strengthen Pt-based chemotherapy. Cisplatin-loaded MON (MON-Pt) showed high loading capacity due to robust coordination between selenium and platinum atoms and preventing premature leakage in normal tissue. MON-Pt exhibited a controlled release of activated cisplatin in response to the redox tumor microenvironment. Meanwhile, MON-Pt containing redox-responsive diselenide bonds could efficiently scavenge intracellular inactivation agents, such as GSH, to enhance Pt-based chemotherapy. 4T1 breast cancer cell membranes cloaked MON-Pt (MON-Pt@CM) performed efficient anticancer performance and low in vivo system toxicity due to long blood circulation time and high tumor accumulation benefiting from the tumor targeting and immune-invasion properties of the homologic cancer cell membrane. These results suggest a biomimetic nanocarrier to control release and reduce the inactivation of cisplatin for efficient and safe Pt-based chemotherapy by responding and regulating the tumor microenvironment.

Ruthenium(II) Complexes with (3-Polyamino)phenanthrolines: Synthesis and Application in Sensing of Cu(II) Ions

This work deals with the development of water-soluble optical sensors based on ruthenium(II) tris(diimine) complexes that exhibit high molar absorptivity and are emissive in aqueous media. Palladium-catalyzed arylation of polyamines with 3-bromo-1,10-phenanthroline (Brphen) and [Ru(bpy)2(Brphen)](PF6)2 (bpy = 2,2’-bipyridine) was explored to prepare Ru2+ complexes with 1,10-phenanthrolines (phen) substituted by linear polyamines (PAs) at position 3 of the heterocycle ([Ru(bpy)2(phen⎼PA)](PF6)2). The most convenient synthetic pathway leading to the target molecular probes includes the preparation of phen⎼PA ligands, followed by ruthenium complexation using cis-Ru(bpy)2Cl2. Complexes bearing a polyamine chain directly linked to phenanthroline core are emissive in aqueous media and their quantum yields are comparable to that of parent [Ru(bpy)3](PF6)2. Their structure can be easily adapted for detection of various analytes by modification of amine groups. As an example, we prepared the emissive complex Ru(N2P2phen) which is suitable for the dual channel (spectrophotometry and luminescence (ON–OFF probe)) selective detection of Cu2+ ions at the physiological pH levels with limits of detection (LOD) by spectrophotometry and fluorescence spectroscopy equal to 9 and 6 μM, respectively, that is lower than the action level in drinking water for copper as prescribed by the US Environmental Protection Agency.

A salicylaldehyde benzoyl hydrazone based near-infrared probe for copper(ii) and its bioimaging applications

Developing highly sensitive and selective methods for Cu²⁺ detection in living systems is of great significance in clinical copper-related disease diagnosis. In this work, a near infrared (NIR) fluorescent probe, CySBH, with a salicylaldehyde benzoyl hydrazone group as a selective and sensitive receptor for Cu²⁺ was designed and synthesized. The specific coordination of the salicylaldehyde benzoyl hydrazone group in CySBH with Cu²⁺ can induce a distinct quench of the fluorescence intensity, allowing for real-time tracking of Cu²⁺. We have demonstrated that CySBH could rapidly recognize Cu²⁺ with good selectivity and high sensitivity. Moreover, on the basis of low cell cytotoxicity, the probe was used to visualize Cu²⁺ in two cell lines by fluorescence imaging. Furthermore, CySBH can also be used to monitor Cu²⁺in vivo due to its NIR emission properties. These overall results illustrate that the NIR fluorescent probe CySBH provides a novel approach for the selective and sensitive monitoring of Cu²⁺ in living systems.

A near infrared fluorescent probe utilizing the salicylaldehyde benzoyl hydrazone group as the Cu²⁺ receptor was developed and used to selectively and sensitively monitor Cu²⁺ in living systems.

Mesoporous Silica Nanoparticles in Chemical Detection: From Small Species to Large Bio-Molecules

A recompilation of applications of mesoporous silica nanoparticles in sensing from the last five years is presented. Its high potential, especially as hybrid materials combined with organic or bio-molecules, is shown. Adding to the multiplying effect of loading high amounts of the transducer into the pores, the selectivity attained by the interaction of the analyte with the layer decorating the material is described. Examples of the different methodologies are presented.

Phosphorescent NIR emitters for biomedicine: applications, advances and challenges

Application of NIR (near-infrared) emitting transition metal complexes in biomedicine is a rapidly developing area of research. Emission of this class of compounds in the "optical transparency windows" of biological tissues and the intrinsic sensitivity of their phosphorescence to oxygen resulted in the preparation of several commercial oxygen sensors capable of deep (up to whole-body) and quantitative mapping of oxygen gradients suitable for in vivo experimental studies. In addition to this achievement, the last decade has also witnessed the increased growth of successful alternative applications of NIR phosphors that include (i) site-specific in vitro and in vivo visualization of sophisticated biological models ranging from 3D cell cultures to intact animals; (ii) sensing of various biologically relevant analytes, such as pH, reactive oxygen and nitrogen species, RedOx agents, etc.; (iii) and several therapeutic applications such as photodynamic (PDT), photothermal (PTT), and photoactivated cancer (PACT) therapies as well as their combinations with other therapeutic and imaging modalities to yield new variants of combined therapies and theranostics. Nevertheless, emerging applications of these compounds in experimental biomedicine and their implementation as therapeutic agents practically applicable in PDT, PTT, and PACT face challenges related to a critically important improvement of their photophysical and physico-chemical characteristics. This review outlines the current state of the art and achievements of the last decade and stresses the most promising trends, major development prospects, and challenges in the design of NIR phosphors suitable for biomedical applications.

Luminescent monomeric and dimeric Ru(ii) acyclic carbene complexes as selective sensors for NH3/amine vapor and humidity

A new class of luminescent bis(bipyridyl) Ru(ii) pyridyl acyclic carbene complexes with environmentally-sensitive dimerization equilibrium have been developed. Owing to the involvement of the orbitals of the diaminocarbene ligand in the emissive excited state, the phosphorescence properties of these complexes are strongly affected by H-bonding interactions with various H-bonding donor/acceptor molecules. With the remarkable differences in the emission properties of the monomer, dimer, and H-bonded amine adducts together with the change of the dimerization equilibrium, these complexes can be used as luminescent gas sensors for humidity, ammonia, and amine vapors. With the responses to amines and humidity and the corresponding change in the luminescence properties, a proof-of-principle for binary optical data storage with a reversible concealment process has been described.

Fabricating multifunctional low-toxicity ratiometric fluorescent probe for individual detection of Cu2+/glutamate and continuous sensing for glutamate via Cu2+-based platform

Herein, a multifunctional ratiometric fluorescent (RF) probe Fe-MIL-88NH₂@RhB was fabricated for individual detection of Cu^2+/Glu and continuous sensing of Glu based on unique coordination principle by encapsulating RhB into the porous of metal-organic-framework-Fe-MIL-88NH₂. Designed Fe-MIL-88NH₂@RhB platform could selectively identify Cu(II)/Glu accompanying a turn-off/turn-on fluorescent behavior with good linearity. Moreover, if the Fe-MIL-88NH₂@RhB/Cu²⁺ is treated with Glu continuously, the quenching fluorescence of this platform (after Cu²⁺ sensing at blue emission) would be further in turn restored. Utilizing Fe-MIL-88NH₂@RhB probe, the imaging of intracellular Cu(II) and Glu in living A549 cells was successful conducted through divisional channels with a satisfactory low cytotoxicity, meanwhile, the sensing results of Glu in serum by the molecular logic gate was also superior, which may use for development of an medical occupational tool for amyotrophic lateral sclerosis tentative diagnosis. In addition, the MOF shows di-modal response (color and lumescence) to Cu²⁺ and Glu with excellent selectivity against a wide range of other interference analytes, and the corresponding portable low-toxicity on-line test strips for Cu²⁺ and Glu recognize has exhibited a remarkable visually chromogenic phenomena, which may utilize for monitoring these contaminants in real water sample. Finally, the feasibility of probe to monitor Cu²⁺ and Glu in foodstuffs was also evaluated.

Iron and nitrogen-co-doped carbon quantum dots for the sensitive and selective detection of hematin and ferric ions and cell imaging

Iron, nitrogen-co-doped carbon quantum dots (Fe,N-CDs) were prepared via a simple one-step hydrothermal method. The quantum yield of fluorescence reached about 27.6% and the blue-emissive Fe,N-CDs had a mean size of 3.76 nm. The as-prepared carbon quantum dots showed good solubility, a high quantum yield, good biocompatibility, low cytotoxicity, and high photostability. Interestingly, the as-prepared Fe,N-CDs exhibited good selectivity and sensitivity toward both hematin and ferric ions, and the limit of detection for hematin and ferric ions was calculated to be about 0.024 μM and 0.64 μM, respectively. At the same time, Fe,N-CDs were used for imaging HeLa cells and showed that most Fe,N-CDs were detained in the lysosome. Thus, this fluorescent probe has potential application in the quantitative detection of hematin or Fe3+ in a complex environment and for determining Fe3+ at the cellular level.

Molecularly imprinted polymer-capped wrinkled silica-quantum dot hybrid particles for fluorescent determination of tetra bromo bisphenol A

A fluorescent probe has been developed for tetra bromo bisphenol A (TBBPA) detection based on molecularly imprinted polymers (MIPs) combined with wrinkled silica nanoparticles (WSNs) and CdTe quantum dot (QD) hybrid particles. The WSNs with large pore sizes were employed as a structural support platform for QD embedding, and MIPs were synthesized on the surface of QD-embedded WSNs. The synthetic procedure was characterized using transmission electron microscopy, Brunauer-Emmett-Teller measurements, X-ray photoelectron spectrometry, Fourier transform infrared spectroscopy, and zeta potential analysis. The MIP-capped wrinkled silica-QD hybrid particles (WSNs-QDs-MIPs) possessed an adsorption capacity of 96.5 mg g^-1 with an imprinting factor of 7.9 towards TBBPA. Under the optimum incubation conditions, the fluorescence intensity (λ_ex = 340 nm, λ_em = 605 nm) was quenched in proportion to added TBBPA in the range 0.025 to 5 μM with a limit of detection of 5.4 nM. The developed probe was successfully applied to the detection of TBBPA in plastic electronic waste samples and the results of this method agreed with those obtained using high-performance liquid chromatography. This method presented a satisfactory selectivity, stability, and reproducibility indicating its potential as a promising probe for TBBPA detection.

Recognition, mechanistic investigation and applications for the detection of biorelevant Cu2+/Fe2+/Fe3+ ions by ruthenium(ii)-polypyridyl based fluorescent sensors

Selective recognition of biorelevant Cu²⁺ and Fe²⁺/Fe³⁺ ions using fluorescent Ru(ii)-polypyridyl based sensors via both “turn-on” and “turn-off” emissive response is the main focus of present article.

In Vivo Chemoselective Photoacoustic Imaging of Copper(II) in Plant and Animal Subjects

The detection of Cu2+ in living plants and animals is of great importance for environment monitoring and disease diagnosis. Here, a near-infrared (NIR) turn-on photoacoustic (PA) probe (denoted as LET-2) is developed for Cu2+ detection in living subjects, such as soybean sprouts and mice. The absorbance band of LET-2 shifts from 625 to 715 nm after the interaction with Cu2+ , thus producing strong PA signal output at 715 nm (PA715 ) as an indicator. The PA715 value is increased as a function of the concentration of Cu2+ (0 × 10-6 -20 × 10-6 m), with a calculated limit of detection of 10.8 × 10-9 m. More importantly, both in vitro and in vivo studies in soybean sprouts and mice indicate that the as-prepared LET-2 PA probe is highly sensitive and selective for Cu2+ detection. These findings provide a solution for in vivo detection of metal ions by using chemoselective PA probes.