Three-Shell Cu@Co@Ni Nanoparticles Stabilized with a Metal-Organic Framework for Enhanced Tandem Catalysis

Selective Reduction of Nitro Compounds by Organosilanes Catalyzed by a Zirconium Metal-Organic Framework Supported Salicylaldimine-Cobalt(II) Complex

Reducing nitro compounds to amines is a fundamental reaction in producing valuable chemicals in industry. Herein, the synthesis and characterization of a zirconium metal-organic framework-supported salicylaldimine-cobalt(II) chloride (salim-UiO-CoCl) and its application in catalytic reduction of nitro compounds are reported. Salim-UiO-Co displayed excellent catalytic activity in chemoselective reduction of aromatic and aliphatic nitro compounds to the corresponding amines in the presence of phenylsilane as a reducing agent under mild reaction conditions. Salim-UiO-Co catalyzed nitro reduction had a broad substrate scope with excellent tolerance to diverse functional groups, including easily reducible ones such as aldehyde, keto, nitrile, and alkene. Salim-UiO-Co MOF catalyst could be recycled and reused at least 14 times without noticeable losing activity and selectivity. Density functional theory (DFT) studies along with spectroscopic analysis were employed to get into a comprehensive investigation of the reaction mechanism. This work underscores the significance of MOF-supported single-site base-metal catalysts for the sustainable and cost-effective synthesis of chemical feedstocks and fine chemicals.

Cu2+@metal-organic framework-derived amphiphilic sandwich catalysts for enhanced hydrogenation selectivity of ketenes at the oil-water interface

Selective catalysis has always been an essential process for manufacturing various fine chemicals, such as food additives, pharmaceuticals and perfumes. Practically, pure target products are difficult to obtain even after complex purification procedures during industrial production. The development of a cost-effective, highly chemoselective and long-life catalyst may be an attractive solution, but such a catalyst is elusive. Herein, a novel class of amphiphilic N-doped carbon (NC), featuring graphitic carbon (GC) and highly dispersed Cu@Co NPs, was fabricated via simple calcination of a Cu2+-doped bimetallic metal-organic framework (MOF) precusor directly. Compared with monometallic Co@GC/NC, the side reaction of CO bond hydrogenation is obviously restrained, and thus, pure target product can be systematically obtained by Cu@Co@GC/NC, highlighting the high selectivity of Cu. More importantly, an amphiphilic characteristic in Cu@Co@GC/NC is a significant knob to integrate organic substrates with water very well. This amphiphilic material shows great potential as a field-deployable pathway for dispersible metal catalysts in organic systems.

MOFs as Versatile Catalysts: Synthesis Strategies and Applications in Value-Added Compound Production

Catalysts played a crucial role in advancing modern human civilization, from ancient times to the industrial revolution. Due to high cost and limited availability of traditional catalysts, there is a need to develop cost-effective, high-activity, and nonprecious metal-based electrocatalysts. Metal-organic frameworks (MOFs) have emerged as an ideal candidate for heterogeneous catalysis due to their physicochemical properties, hybrid inorganic/organic structures, uncoordinated metal sites, and accessible organic sections. MOFs are high nanoporous crystalline materials that can be used as catalysts to facilitate polymerization reactions. Their chemical and structural diversity make them effective for various reactions compared to traditional catalysts. MOFs have been applied in gas storage and separation, ion-exchange, drug delivery, luminescence, sensing, nanofilters, water purification, and catalysis. The review focuses on MOF-enabled heterogeneous catalysis for value-added compound production, including alcohol oxidation, olefin oligomerization, and polymerization reactions. MOFs offer tunable porosity, high spatial density, and single-crystal XRD control over catalyst properties. In this review, MOFs were focused on reactions of CO2 fixation, CO2 reduction, and photoelectrochemical water splitting. Overall, MOFs have great potential as versatile catalysts for diverse applications in the future.

Organoamine Templated Multifunctional Hybrid Metal Phosphonate Frameworks: Promising Candidates for Tailoring Electrochemical Behaviors and Size-Selective Efficient Heterogeneous Lewis Acid Catalysis

The successful discovery of novel multifunctional metal phosphonate framework materials that incorporate newer organoamines and their utilization as a potential electroactive material for energy storage applications (supercapacitors) and as efficient heterogeneous catalysts are the most enduring challenges at present. From this perspective, herein, four new inorganic-organic hybrid zinc organodiphosphonate materials, namely, [C₅H₁₄N₂]₂[Zn₆(hedp)₄] (I), [C₅H₁₄N₂]_0.5[Zn₃(Hhedp) (hedp)]·2H₂O (II), [C₆H₁₆N₂][Zn₃(hedp)₂] (III), and [C₁₀H₂₄N₄][Zn₆(Hhedp)₂(hedp)₂] (IV) (H₄hedp = 1-hydroxyethane 1,1-diphosphonic acid), have been synthesized through the introduction of different organoamines and then structurally analyzed using various techniques. The compounds (I-IV) possess a three-dimensional network through alternate connectivity of zinc ions and diphosphonate ligands, as confirmed using single-crystal X-ray diffraction. The investigations of electrochemical charge storage behaviors of the present compounds indicate that compound III exhibits a high specific capacitance of 190 F g^-1 (76 C g^-1) at 1 A g^-1, while compound II shows an excellent cycling stability of 90.11% even after 5000 cycles at 5 A g^-1 in the 6 M KOH solution. Further, the present materials have also been utilized as active heterogeneous Lewis acid catalysts in the ketalization reaction. The screening of various substrate scopes during the catalytic process confirms the size-selective heterogeneous catalytic nature of the framework compounds. To our utmost knowledge, such a size-selective heterogeneous Lewis acid catalytic behavior has been observed for the first time in the amine templated inorganic-organic hybrid framework family. Moreover, the excellent size-selective catalytic efficiencies with the d¹⁰ metal system and recyclability performances make the compounds (I-IV) more efficient and promising Lewis acid heterogeneous catalysts.

Concurrent Oxidation-Reduction Reactions in a Single System Using a Low-Plasma Phenomenon: Excellent Catalytic Performance and Stability in the Hydrogenation Reaction

The catalytic activity and stability of metal nanocatalysts toward agglomeration and detachment during their preparation on a support surface are major challenges in practical applications. Herein, we report a novel, one-step, synchronized electro-oxidation-reduction "bottom-up" approach for the preparation of small and highly stable Cu nanoparticles (NPs) supported on a porous inorganic (TiO₂@SiO₂) coating with significant catalytic activity and stability. This unique embedded structure restrains the sintering of CuNPs on a porous TiO₂@SiO₂ surface at a high temperature and exhibits a high reduction ratio (100% in 60 s) and no decay in activity even after 30 cycles (>98% conversion in 3 min). This occurs in a model reaction of 4-nitrophenol (4-NP) hydrogenation, far exceeding the performance of most common catalysts observed to date. More importantly, nitroarene, ketone/aldehydes, and organic dyes were reduced to the corresponding compounds with 100% conversion. Density functional theory (DFT) calculations of experimental model systems with six Cu, two Fe, and four Ag clusters anchored on the TiO₂ surface were conducted to verify the experimental observations. The experimental results and DFT calculations revealed that CuNPs not only favor the adsorption on the TiO₂ surface over those of Fe and AgNPs but also boost the adsorption energy and activity of 4-NP. This strategy has also been extended to the preparation of other single-atom catalysts (e.g., FeNPs-TiO₂@SiO₂ and AgNPs-TiO₂@SiO₂), which exhibit excellent catalytic performance.

Metal-Support Synergistic Catalysis in Pt/MoO3-x Nanorods toward Ammonia Borane Hydrolysis with Efficient Hydrogen Generation

Ammonia borane (NH₃BH₃, AB) serves as a promising material for chemical storage of hydrogen owing to its high hydrogen density and superior stability, in which the development of highly efficient heterogeneous catalysts toward AB hydrolysis plays a crucial role. Herein, we report Pt atomic clusters supported on MoO_3-x nanorods using a two-step process: MoO_3-x nanorods were synthesized at various calcination temperatures, followed by a further deposition-precipitation approach to obtain Pt/MoO_3-x catalysts (denoted as Pt/MoO_3-x-T, T = 300, 400, 500, and 600 °C). The optimized Pt/MoO_3-x-500 catalyst exhibits a prominent catalytic performance toward hydrolytic dehydrogenation of AB for H₂ generation, with a turnover frequency value of 2268.6 min^-1, which stands at the top level among the reported catalysts. Moreover, the catalyst shows a remarkable stability with 90% activity remaining after five cycles. A combination investigation including HR-TEM, ac-HAADF-STEM, XPS, in situ CO-IR, XANES, and Bader charge analysis verifies the formation of Pt²⁺-O_v-Mo⁵⁺ (O_v represents oxygen vacancy), whose concentration is dependent on the strength of the metal-support interaction. Studies on the structure-property correlation based on an isotopic kinetic experiment, in situ FT-IR, and DFT calculations further reveal that the Mo⁵⁺-O_v sites accelerate the dissociation of H₂O molecules (rate-determining step), while the adjacent Pt²⁺ species facilitates the cleavage of the B-H bond in the AB molecule to produce H₂. This work provides a fundamental and systematic understanding on the metal-support synergistic catalysis toward robust H₂ production, which is constructive for hydrogen storage and energy catalysis.

Advances and Prospects in Metal-Organic Frameworks as Key Nexus for Chemocatalytic Hydrogen Production

Hydrogen is a clean and sustainable energy carrier, which is considered a promising alternative for fossil fuels to solve the global energy crisis and respond to climate change. Social concerns on its safe storage promote continuous exploration of alternatives to traditional storage methods. In this case, chemical hydrogen storage materials initiate plentiful research with special attention to the design of heterogeneous catalysts that can enhance efficient and highly selective hydrogen production. Metal-organic frameworks (MOFs), a kind of unique crystalline porous materials featuring highly ordered porosities and tailorable structures, can provide various active sites (i.e., metal nodes, functional linkers, and defects) for heterogeneous catalysis. Furthermore, the easy construction of active sites in highly ordered MOFs, which can work as plate for the delicate active site engineering, make them ideal candidates for a variety of heterogeneous catalysts including chemocatalytic hydrogen production. This review concentrates on the application of MOFs as heterogeneous catalysts or catalyst supports in chemocatalytic hydrogen production. Recent progresses of MOFs as catalysts for chemocatalytic hydrogen production are comprehensively summarized. The research methods, mechanism analyses, and prospects of MOFs in this field are discussed. The challenges in future industrial applications of MOFs as catalysts for hydrogen production are proposed.

Mechanistic Insight into the Synergetic Interaction of Ammonia Borane and Water on ZIF-67-Derived Co@Porous Carbon for Controlled Generation of Dihydrogen

Regarding dihydrogen as a clean and renewable energy source, ammonia borane (NH₃BH₃, AB) was considered as a chemical H₂-storage and H₂-delivery material due to its high storage capacity of dihydrogen (19.6 wt %) and stability at room temperature. To advance the development of efficient and recyclable catalysts for hydrolytic dehydrogenation of AB with parallel insight into the reaction mechanism, herein, ZIF-67-derived fcc-Co@porous carbon nano/microparticles (cZIF-67_nm/cZIF-67_μm) were explored to promote catalytic dehydrogenation of AB and generation of H_2(g). According to kinetic and computational studies, zero-order dependence on the concentration of AB, first-order dependence on the concentration of cZIF-67_nm (or cZIF-67_μm), and a kinetic isotope effect value of 2.45 (or 2.64) for H₂O/D₂O identify the Co-catalyzed cleavage of the H-OH bond, instead of the H-BH₂NH₃ bond, as the rate-determining step in the hydrolytic dehydrogenation of AB. Despite the absent evolution of H_2(g) in the reaction of cZIF-67 and AB in the organic solvents (i.e., THF or CH₃OH) or in the reaction of cZIF-67 and water, Co-mediated activation of AB and formation of a Co-H intermediate were evidenced by theoretical calculation, infrared spectroscopy in combination with an isotope-labeling experiment, and reactivity study toward CO₂-to-formate/H₂O-to-H₂ conversion. Moreover, the computational study discovers a synergistic interaction between AB and the water cluster (H₂O)₉ on fcc-Co, which shifts the splitting of water into an exergonic process and lowers the thermodynamic barrier for the generation and desorption of H_2(g) from the Co-H intermediates. With the kinetic and mechanistic study of ZIF-67-derived Co@porous carbon for catalytic hydrolysis of AB, the spatiotemporal control on the generation of H_2(g) for the treatment of inflammatory diseases will be further investigated in the near future.

Fabrication of magnetically separable ruthenium nanoparticles decorated on channelled silica microspheres: Efficient catalysts for chemoselective hydrogenation of nitroarenes

Fe₃O₄-SiO₂ microspheres were synthesized by a three-step synthetic procedure involving silica coating, surface capping, and surface modification. These magnetic mesoporous microspheres were employed as sorbents for the incorporation of ultrasmall Ru nanoparticles (2-5 nm) followed by thermal aggregation of the microspheres for achieving better heterogeneity and low leaching. The Ru decorated Fe₃O₄-SiO₂ microspheres (Ru@Fe₃O₄-CSM) were applied as chemoselective catalysts to convert more than 20 substituted nitroarenes to corresponding amines with good-to-excellent conversion (77-99%) and selectivity (70-100%) under mild conditions; the catalyst can be magnetically recovered within a frame of 90s (recovery time-lapse) and reused up to 5 times without significant decrease in activity or selectivity. Magnetic hysteresis studies were performed to elucidate the magnetic behavior of the ruthenium decorated materials.

Nickel Nanoparticles Immobilized over Mesoporous SBA-15 for Efficient Carbonylative Coupling Reactions Utilizing CO2: A Spotlight

Ecofriendly routes for the synthesis of carbamates and carbonylative coupling products such as benzyl formate derivatives are very demanding for both academia and industries. Foreseeing a sustainable green future, we systematically analyzed the synthesis history of both these chemicals, mentioning their pros and cons. As a step towards green chemistry, here we have optimized the reaction conditions for the synthesis of various benzyl formates from corresponding benzyl halides and carbamates from substituted anilines and alkyl halides catalyzed by Ni(0) nanoparticles (NPs) immobilized over amine-functionalized ordered mesoporous SBA-15 material in the presence of CO₂ as C1 source. This spotlight on applications is aimed to provide a clear outlook to date regarding the gradual progress in the synthesis of both these aforementioned chemicals and finally addresses further efforts for overcoming the current challenges.

Mechanistic Insights into Nanoparticle Formation from Bimetallic Metal-Organic Frameworks

Understanding and controlling nanomaterial structure, chemistry, and defects represents a synthetic and characterization challenge. Metal-organic frameworks (MOFs) have recently been explored as unconventional precursors from which to prepare nanomaterials. Here we use in situ X-ray pair distribution function analysis to probe the mechanism through which MOFs transform into nanomaterials during pyrolysis. By comparing a series of bimetallic MOFs with trimeric node different compositions (Fe₃, Fe₂Co, and Fe₂Ni) linked by carboxylate ligands in a PCN-250 lattice, we demonstrate that the resulting nanoparticle structure, chemistry, and defect concentration depend on the node chemistry of the original MOF. These results suggest that the preorganized structure and chemistry of the MOF offer new potential control over the nanomaterial synthesis under mild reaction conditions. In the case of Fe₂Ni-PCN-250, selective extraction of one Ni ion from each node without collapsing the framework (i.e., node-ligand connectivity) leaves a metal-deficient MOF state that may provide a new route to post-synthetically tune the chemistry the MOF and subsequent nanomaterials.

Preparation of Ni-microsphere and Cu-MOF using aspartic acid as coordinating ligand and study of their catalytic properties in Stille and sulfoxidation reactions

In this study, the thermal and catalytic behavior of Ni-microsphere and Cu-MOF were investigated with aspartic acid as the coordinating ligand with different morphologies. The Ni-microsphere and Cu-MOF with aspartic acid, as the coordinating ligand, were prepared via a solvothermal method. The morphology and porosity of the obtained Ni microsphere and Cu-MOF were characterized by XRD, FTIR, TGA, DSC, BET and SEM techniques. The catalytic activity of the Ni-microsphere and Cu-MOF was examined in Stille and sulfoxidation reactions. The Ni microsphere and Cu-MOF were easily isolated from the reaction mixtures by simple filtration and then recycled four times without any reduction of catalytic efficiency.

Metal–organic framework (MOF)-derived catalysts for chemoselective hydrogenation of nitroarenes

The MOFs derived catalysts conducted in the chemoselective hydrogenation of substituted nitroarenes, including pyrolysis and confined catalyst, are reviewed.

A robust heterogeneous Co-MOF catalyst in azide–alkyne cycloaddition and Friedel–Crafts reactions as well as hydrosilylation of alkynes

A robust Co(ii) MOF with high stability was prepared to promote the azide–alkyne cycloaddition reaction, Friedel–Crafts reactions of indoles and hydrosilylation reactions of alkynes.

Recent developments of nanocatalyzed liquid-phase hydrogen generation

Hydrogen is the most effective and sustainable carrier of clean energy, and liquid-phase hydrogen storage materials with high hydrogen content, reversibility and good dehydrogenation kinetics are promising in view of "hydrogen economy". Efficient, low-cost, safe and selective hydrogen generation from chemical storage materials remains challenging, however. In this Review article, an overview of the recent achievements is provided, addressing the topic of nanocatalysis of hydrogen production from liquid-phase hydrogen storage materials including metal-boron hydrides, borane-nitrogen compounds, and liquid organic hydrides. The state-of-the-art catalysts range from high-performance nanocatalysts based on noble and non-noble metal nanoparticles (NPs) to emerging single-atom catalysts. Key aspects that are discussed include insights into the dehydrogenation mechanisms, regenerations from the spent liquid chemical hydrides, and tandem reactions using the in situ generated hydrogen. Finally, challenges, perspectives, and research directions for this area are envisaged.

Nanopore-Supported Metal Nanocatalysts for Efficient Hydrogen Generation from Liquid-Phase Chemical Hydrogen Storage Materials

Hydrogen has emerged as an environmentally attractive fuel and a promising energy carrier for future applications to meet the ever-increasing energy challenges. The safe and efficient storage and release of hydrogen remain a bottleneck for realizing the upcoming hydrogen economy. Hydrogen storage based on liquid-phase chemical hydrogen storage materials is one of the most promising hydrogen storage techniques, which offers considerable potential for large-scale practical applications for its excellent safety, great convenience, and high efficiency. Recently, nanopore-supported metal nanocatalysts have stood out remarkably in boosting the field of liquid-phase chemical hydrogen storage. Herein, the latest research progress in catalytic hydrogen production is summarized, from liquid-phase chemical hydrogen storage materials, such as formic acid, ammonia borane, hydrous hydrazine, and sodium borohydride, by using metal nanocatalysts confined within diverse nanoporous materials, such as metal-organic frameworks, porous carbons, zeolites, mesoporous silica, and porous organic polymers. The state-of-the-art synthetic strategies and advanced characterizations for these nanocatalysts, as well as their catalytic performances in hydrogen generation, are presented. The limitation of each hydrogen storage system and future challenges and opportunities on this subject are also discussed. References in related fields are provided, and more developments and applications to achieve hydrogen energy will be inspired.

Novel CoNi-metal-organic framework crystal-derived CoNi@C: synthesis and effective cascade catalysis

Evaluating the catalytic influence of metal sites on derivates obtained from the calcination of metal-organic frameworks (MOFs) is very important for the rational construction of novel MOFs. Based on this catalytic functional guidance, two new Co-MOF and CoNi-MOF crystals were designed and synthesized, and further pyrolyzed to obtain corresponding porous carbon-based catalysts. Interestingly, the derivates exhibited better catalytic performance toward the tandem reaction of dehydrogenation of NH3BH3 and subsequent hydrogenation reduction of nitro/olefin compounds than those of the CoNi-ZIF (a star MOF)-derived CoNi@carbon and most metal catalysts. Significantly, the CoNi@C maintained excellent activity, even after 30 cycles, demonstrating its great longevity and durability, which are especially important for the practical application of metal catalysts in industrial catalysis.

The synergistic effect of Co/Ni in ultrathin metal–organic framework nanosheets for the prominent optimization of non-enzymatic electrochemical glucose detection

Co–Ni ultrathin metal organic framework nanosheets exhibited extremely high sensitivity, wide linear range, low detection limit and excellent selectivity as a glucose sensing electrode material.

Encapsulation of Metal Nanoparticles within Metal-Organic Frameworks for the Reduction of Nitro Compounds

Nitro group reduction is a reaction of a considerable importance for the preparation of bulk chemicals and in organic synthesis. There are reports in the literature showing that incorporation of metal nanoparticles (MNPs) inside metal–organic frameworks (MOFs) is a suitable strategy to develop catalysts for these reactions. Some of the examples reported in the literature have shown activity data confirming the superior performance of MNPs inside MOFs. In the present review, the existing literature reports have been grouped depending on whether these MNPs correspond to a single metal or they are alloys. The final section of this review summarizes the state of the art and forecasts future developments in the field.