Development of an HKUST-1 Nanofiller-Templated Poly(ether sulfone) Mixed Matrix Membrane for a Highly Efficient Ultrafiltration Process

MOF-Based Membranes for Remediated Application of Water Pollution

Membrane separation plays a crucial role in the current increasingly complex energy environment. Membranes prepared by metal-organic framework (MOF) materials usually possess unique advantages in common, such as uniform pore size, ultra-high porosity, enhanced selectivity and throughput, and excellent adsorption property, which have been contributed to the separation fields. In this comprehensive review, we summarize various designs and synthesized strategies of free-standing MOF and composite MOF-based membranes for water treatment. Special emphases are given not only on the effects of MOF on membrane performance, removal efficiencies, and elimination mechanisms, but also on the importance of MOF-based membranes for the applications of oily and micro-pollutant removal, adsorption, separation, and catalysis. The challenges and opportunities in the future for the industrial implementation of MOF-based membranes are also discussed.

Progressive Insights into Metal-Organic Frameworks and Metal-Organic Framework-Membrane Composite Systems for Wastewater Management

The sustainable management of wastewater through recycling and utilization stands as a pressing concern in the trajectory of societal advancement. Prioritizing the elimination of diverse organic contaminants is paramount in wastewater treatment, garnering significant attention from researchers worldwide. Emerging metal-organic framework materials (MOFs), bridging organic and inorganic attributes, have surfaced as novel adsorbents, showcasing pivotal potential in wastewater remediation. Nevertheless, challenges like limited water stability, elevated dissolution rates, and inadequate hydrophobicity persist in the context of wastewater treatment. To enhance the performance of MOFs, they can be modified through chemical or physical methods, and combined with membrane materials as additives to create membrane composite materials. These membrane composites, derived from MOFs, exhibit remarkable characteristics including enhanced porosity, adjustable pore dimensions, superior permeability, optimal conductivity, and robust water stability. Their ability to effectively sequester organic compounds has spurred significant research in this field. This paper introduces methods for enhancing the performance of MOFs and explores their potential applications in water treatment. It delves into the detailed design, synthesis strategies, and fabrication of composite membranes using MOFs. Furthermore, it focuses on the application prospects, challenges, and opportunities associated with MOF composite membranes in water treatment.

Organic solvent-free constructing of stable zeolitic imidazolate framework functional layer enhanced by halloysite nanotubes and polyvinyl alcohol on polyvinylidene fluoride hollow fiber membranes for treating dyeing wastewater

In this study, zeolitic imidazolate framework (ZIF-8)/polyvinylidene fluoride (PVDF) loose nanofiltration (NF) hollow fiber membranes were fabricated by constructing ZIF-8 functional layer on the PVDF supporting membranes based on the vacuum-assisted assembly process. The ZIF-8 synthesis was completed in a water system, and the synthesized ZIF-8 suspension was directly added to polyvinyl alcohol (PVA) and halloysite nanotubes (HNTs) aqueous solution system without drying to prepare the casting solution, which could solve the agglomeration and poor dispersion problem of ZIF-8 particles. In addition, the embedded HNTs and the loaded PVA among the ZIF-8 layer could improve the bonding strength between the ZIF-8 layer and the supporting membranes. After constructing ZIF-8 functional layer, the pore size of supporting membranes decreased from more than 300 nm to several nanometers. Furthermore, the water contact angle reduced from 91.1° to 54.2°. Applied to treat dye wastewater, the prepared ZIF-8/PVDF membranes maintained high dye rejection (˃99.0 %) for Congo red (CR), but low salt rejection for NaCl (about 2 %). In addition, the flux could reach 21.6 L m^-2h^-1 after continuous filtration 360 min, exhibiting a potential for treating the dye/salt wastewater. In particular, there were no organic solvents used in the work, which provided a promising idea for solvent-free fabrication of loose NF membranes.

Emerging advances and current applications of nanoMOF-based membranes for water treatment

Metal-organic frameworks (MOFs) are significantly tunable materials that can be exploited in a wide range of applications. In recent years, a large number of studies have been focused on synthesizing nano-scale MOFs (nanoMOFs), thus taking advantage of these unique materials in various applications, especially those that are only possible at nano-scale. One of the technologies where nanoMOF materials occupy a central role is the membrane technology as one of the most efficient separation techniques. Therefore, numerous reports can be found on the enhancement of the physicochemical properties of polymeric membranes by using nanoMOFs, leading to remarkably improved performance. One of the most considerable applications of these nanoMOF-based membranes is in water treatment systems, because freshwater scarcity is now an undeniable crisis facing humanity. In this in-depth review, the most prominent synthesis and post-synthesis methods for the fabrication of nanoMOFs are initially discussed. Afterwards, different nanoMOF-based composite membranes such as thin-film nanocomposites (TFN) and mixed-matrix membranes (MMM) and their various fabrication methods are reviewed and compared. Then, the impacts of using MOFs-based membranes for water purification through growing metal-organic frameworks crystals on the support materials and utilization of metal-organic frameworks as fillers in mixed matrix membrane (MMM) are highlighted. Finally, a summary of pros and cons of using nanoMOFs in membrane technology for water treatment purposes and clear future prospects and research potentials are presented.

Inner Surface Hydrophilic Modification of PVDF Membrane with Tea Polyphenols/Silica Composite Coating

The use of Polyvinylidene fluoride (PVDF) membranes is constrained in wastewater treatment because of their hydrophobic nature. Therefore, a large number of researchers have been working on the hydrophilic modification of their surfaces. In this work, a superhydrophilic tea polyphenols/silica composite coating was developed by a one-step process. The composite coating can achieve not only superhydrophilic modification of the surface, but also the inner surface of the porous PVDF membrane, which endows the modified membrane with excellent water permeability. The modified membrane possesses ultrahigh water flux (15,353 L·m⁻²·h⁻¹). Besides this, the modified membrane can realize a highly efficient separation of oil/water emulsions (above 96%).

Recent Improvement Strategies on Metal-Organic Frameworks as Adsorbent, Catalyst, and Membrane for Wastewater Treatment

The accumulation of pollutants in water is dangerous for the environment and human lives. Some of them are considered as persistent organic pollutants (POPs) that cannot be eliminated from wastewater effluent. Thus, many researchers have devoted their efforts to improving the existing technology or providing an alternative strategy to solve this environmental problem. One of the attractive materials for this purpose are metal-organic frameworks (MOFs) due to their superior high surface area, high porosity, and the tunable features of their structures and function. This review provides an up-to-date and comprehensive description of MOFs and their crucial role as adsorbent, catalyst, and membrane in wastewater treatment. This study also highlighted several strategies to improve their capability to remove pollutants from water effluent.

Development of hydrophilic PES membranes using F127 and HKUST-1 based on the RTIPS method: Mitigate the permeability-selectivity trade-off

In this study, to mitigate the permeability-selectivity trade-off effect, Pluronic F127 (F127) and HKUST-1 were employed to construct high-performance membranes based on the reverse thermally induced phase separation (RTIPS) method. F127, as a hydrophilic modifier, was applied to increase permeability and resist polyethersulfone (PES) membrane fouling, while the collapse of HKSUT-1 caused by its instability in pure water improved the permeability and selectivity of the membrane. Characterizations demonstrated the successful synthesis of HKUST-1, together with the successful introduction of HKSUT-1 and F127 in PES membranes. It was observed that the membrane prepared by the RTIPS process possessed a uniformly porous surface and sponge-like cross-section with excellent mechanical properties, higher permeability, and selectivity compared to the dense skin and finger-like cross-section of the membrane prepared by the nonsolvent induced phase separation (NIPS) method. Moreover, the permeation and bovine serum albumin (BSA) rejection rate of the optimal membrane reached 2378 L/m² h and 89.3%, respectively, which were far higher than those of the pure membrane. Hydrophilic F127 and many microvoids formed by the collapse of HKUST-1, played an important role in excellent antifouling properties, high permeability, and selectivity by pure water flux (PWF), flux recovery rate (FRR), BSA flux, and COD removal rate tests. Overall, the membrane with F127 and HKSUT-1 prepared via the RTIPS method not only obtained excellent antifouling properties but also mitigated the permeability-selectivity trade-off.

Combined strategy of blending and surface modification as an effective route to prepare antifouling ultrafiltration membranes

Ultrafiltration (UF) membranes blended with hydrophilic nanomaterials usually exhibit preferable overall performance including the membrane permeability and antifouling capability. However, the improvement in antifouling performance may be not outstanding due to the small amount of nanomaterial distributed near the membrane surface and the limited improvement in membrane hydrophilicity. Notably, excess addition of nanomaterials may lead to the decline in membrane permeability. In order to solve the above problem, we integrated the strategy of blending and surface modification to construct novel hybrid UF membranes. Novel nanohybrid was prepared via tannic acid (TA) coating on hydroxyapatite nanotubes (HANTs) and the subsequent grafting of zwitterionic polyethylenimine (ZPEI). The prepared nanohybrid (HANTs@TA-ZPEI) was incorporated with the polysulfone containing tertiary amine groups to fabricate hybrid membranes via the solution blending and the subsequent immersion-precipitation phase inversion process. Then the matrix was modified with zwitterions via the reaction of tertiary amine group with 1, 3-propane sultone. UF tests were conducted using the bovine serum albumin (BSA) and humic acid (HA) as the representative foulants. Results showed that both the permeability and the antifouling performance of the membranes achieved favorable promotion. Thereinto, the water flux of M-B0.4-Z membrane (pre blended with 0.4 wt% HANTs@TA-ZPEI in the casting solution and post-surface modified) exhibited 2.6 times that of the pristine membrane and the flux recovery ratio (FRR) for BSA and HA attained 93.4% and 96.1%, respectively. By the combination of blending and surface modification, both the membrane permeability and fouling resistant properties could attain remarkable promotion, which exerted the advantages of two methods and made up the deficiency of single blending method.

The hierarchical flower-like MoS2 nanosheets incorporated into PES mixed matrix membranes for enhanced separation performance

Membrane fouling is an issue of concern due to the hydrophobic properties of polyethersulfone (PES) membrane when applied in water treatment. In this work, a facile hydrothermal method was utilized to synthesize hierarchical flower-like structured molybdenum disulfide nanosheets (HF-MoS2 NSs) that then incorporated into PES membranes as composite membranes. We characterized their permeability, the separation performance, the antifouling performance, and the antibacterial activity systematically. Results showed that composite membranes exhibited a better pure water flux (286 LMH/bar) at the HF-MoS₂ NSs content of 0.4 wt%, which was 1.8 times higher than the control membrane. Also, composite PES membranes achieved 98.2% and 96.9% rejection of BSA and HA in comparison with the control PES membrane (87.3%, and 84.5%, respectively). Compare to the control PES membrane, the flux recovery ratio of the composite membrane increased from 69% to 88% for BSA fouling and increased from 84% to 93% for HA fouling. The retention rate for the organic dyes also improved slightly after HF-MoS2 NSs incorporation into the membrane. Additionally, the composite membranes exhibited a relatively high antibacterial activity against E. coli and B. subtilis with antibacterial rates of 67.8% and 82.5%, respectively. In conclusion, HF-MoS2 NSs incorporated composite membranes were shown to have outstanding filtration performance and could be a promising candidate for practical application in water filtration.

Engineering Heterostructured Thin-Film Nanocomposite Membrane with Functionalized Graphene Oxide Quantum Dots (GOQD) for Highly Efficient Reverse Osmosis

In this study, custom-tailored graphene oxide quantum dots (GOQD) were synthesized as functional nanofillers to be embedded into the polyamide (PA) membrane for reverse osmosis (RO) via interfacial polymerization (IP). The heterostructured interface-functionalization of amine/sulfonic decoration on GOQD (N/S-d-GOQD) takes place via the tuning of the molecular design. The embedded N/S-d-GOQD inside the PA matrix contributes to facilitating water molecules quick transport due to the more accessible capturing sites with higher internal polarity, achieving a nearly 3-fold increase in water permeance when compared to the pristine thin-film composite (TFC) membrane. Covalent bonding between the terminal amine groups and the acyl chloride of trimesoyl chloride (TMC) enables the formation of an amplified selective layer, while the sulfonic part assists in maintaining a robust membrane surface negative charge, thus remarkably improving the membrane selectivity toward NaCl. As a result, the newly developed TFN membrane performed remarkably high water permeance up to 5.89 L m^-2 h^-1 bar^-1 without the compromising of its favorable salt (NaCl) rejection ratio of 97.1%, revealing a comparably high separation property when comparing to the state-of-the-art RO membranes, and surpassing the permeability-selectivity trade-off limits. Furthermore, we systematically investigated the GOQDs with different surface decorations but similar configurations (including 3 different nanofillers of pristine GOQD, amine decorated GOQD (N-d-GOQD), and N/S-d-GOQD) to unveil the underlying mechanisms of the swing effects of internal geometry and polarity of the embedded nanofillers on contributing to the uptake, and/or release of aqueous molecules within TFN membranes, providing a fundamental perspective to investigate the impact of embedded nanofillers on the formation of an IP layer and the overall transporting behavior of the RO process.

N-doped Cu-MOFs for efficient electrochemical determination of dopamine and sulfanilamide

Fast and efficient tracking of micropollutants in aquatic environment by developing novel electrode materials is of great significance. Herein, a polyvinylpyrrolidone (PVP) assisted strategy is applied for synthesis of nitrogen doped Cu MOFs (N-Cu-MOF) for micropollutants electrochemical detection. The designed N-Cu-MOFs possess uniform octahedral shape with large surface area (1184 m² g^-1) and an average size of roughly 450 nm, exhibiting the excellent electroanalytical capability for the detection of multipollutants. In the case of dopamine (DA) and sulfonamides (SA) as typical microcontaminants, the designed N-Cu-MOFs exhibited wide linear ranges of 0.50 nM-1.78 mM and low detection limit (LOD, 0.15 nM, S/N = 3) for the determination of DA, as well as a linear range of 0.01-58.3 μM and LOD (0.003 μM, S/N = 3) for monitoring SA. The improved performance is attributed to the heteroatom introduction and good dispersion stability of N-Cu-MOF with PVP-decorated. The good electroanalytical ability of N-Cu-MOF for detection of DA and SA can provide a guide to efficient and rapid monitor other micropollutants and construct novel electrochemical sensors.

Batch and fixed-bed column adsorption of tetrabromobisphenol A onto metal organic resin: equilibrium, kinetic and mechanism studies

MORs were prepared through fabricating MOFs and resin for effective TBBPA removal in fix-bed column experiments from contaminated waters.