Amorphous Bimetallic Cobalt Nickel Sulfide Cocatalysts for Significantly Boosting Photocatalytic Hydrogen Evolution Performance of Graphitic Carbon Nitride: Efficient Interfacial Charge Transfer

An efficient improvement for photocatalytic hydrogen peroxide production: Sulfur vacancies in CaIn2S4

Visible-light-driven hydrogen peroxide (H2O2) synthesis is a sustainable and economically viable strategy for green production. However, most metal sulfide semiconductors exhibit insufficient band potentials, limiting selectivity and quantum yield. Here, we introduce sulfur vacancies into CaIn2S4 to modify its band structure, enhancing the conduction band's reduction capability and shifting oxygen reduction from a single direct 2e- pathway to a dual-pathway mechanism. This adjustment improves electron utilization efficiency. Theoretical calculations reveal that sulfur vacancies act as electron traps, promoting charge separation and suppressing recombination. Structural and electronic characterizations confirm these effects, and as a result, sulfur-vacancy-rich CaIn2S4 (CaIS SV) achieves a photocatalytic H2O2 production rate 9-fold than that of pristine CaIn2S4.

Enhancing photocatalytic hydrogen evolution of carbon nitride through high-valent cobalt active sites in cobalt sulfide co-catalyst

The photocatalytic hydrogen (H2) evolution reaction driven by solar energy is one of the most promising methods to alleviate energy and environmental problems. Regrettably, the rapid recombination of photogenerated electrons and hole pairs in semiconductor catalysts leads to low solar energy conversion efficiency. To address this problem, we chose the method of co-catalyst loading. This study uses an in-situ self-assembly growth strategy to load high-valent cobalt sulfide (CoS) onto bulk carbon nitride (BCN) for photocatalytic H2 evolution. The results show that the photocatalytic H2 evolution performance of the optimal ratio of CoS and BCN composite (CoS-BCN(15%)) is 156 times that of BCN. The main reason for the performance improvement is that CoS nanoparticles act as co-catalysts to increase the carrier migration rate. Moreover, CoS nanoparticles contain mixed-valence Co3+/Co2+. During the reaction, high-valence cobalt ions become electron transfer stations, reacting with additional electrons to generate low-valence ions, reducing the recombination of carriers. Additionally, combined experiments and theoretical calculations show that the CoS surface is more conducive to the precipitation of H2 than BCN. This study provides a reference for further exploring the mechanism of action of co-catalysts.

Polymerization Improvement of Graphitic Carbon Nitride Films Derived from Melamine and Thiourea

Deposition of low-cost, efficient, and environmentally friendly graphitic carbon nitride (g-CN) films as photoanodes is a crucial step for constructing photoelectrochemical (PEC) cells and exploring their PEC performance. Currently, the improvement of the photocurrent density of g-CN films is badly needed for their practical applications in PEC water splitting. Enhancing the g-CN crystallinity by optimizing their synthesis conditions only through screening appropriate reactant precursors is insufficient for this purpose. Herein, using melamine and thiourea precursors with mass ratio 5:1, the degree of polymerization of g-CN thin films is successfully improved by a thermal vapor condensation method. The obtained pure g-CN exhibits a remarkably enhanced photocurrent density of 404.4 µA cm-2 at 1.23 V versus reversible hydrogen electrodes. Theoretical calculations reveal that the continuous attachment of small carbodiimide (HN═C═NH) mainly generated by thiourea to the melamine matrix facilitates the formation of large-area conjugated structure, which fundamentally determines better charge carrier separation and transfer thereby enhancing the PEC performance. This work realizes the synthesis of well-polymerized g-CN films with improved PEC activity and offers a computational understanding for the nucleation and growth mechanism of the polycrystalline g-CN.

Anchoring ZnIn2S4 nanosheets on cross-like FeSe2 to construct photothermal-enhanced S-scheme heterojunction for photocatalytic H2 evolution

Rational design of the morphology and heterojunction to accelerate the separation of electron-hole pairs has played an indispensable role in improving the photocatalytic hydrogen evolution. ZnIn2S4 (ZIS) has aroused considerable attention in solar-to-chemical energy conversion due to its remarkable photoelectrical properties and relatively negative energy band, whereas it still suffers from the severe photogenerated carrier recombination and catalyst aggregation. Herein, guided by density functional theory calculations, the constructed FeSe2@ZnIn2S4 (FS@ZIS) heterojunction model has a hydrogen Gibbs free energy closer to zero compared with pure ZIS and FS, which is beneficial for hydrogen adsorption and desorption on the photocatalyst surface. Therefore, a novel cross-like core-shell FS@ZIS Step-scheme (S-scheme) heterojunction was synthesized successfully by in-situ growing ZIS nanosheets on the surface of cross-like FS. The structure with cross-like core-shell morphology not only inhibits the agglomeration of ZIS to increase specific surface area, but also provides a tight interface with S-scheme heterojunction. Moreover, the S-scheme heterojunction with a tight interface can effectively separate electron-hole pairs, leaving photoinduced charges with higher potentials. Furthermore, FS@ZIS-20 possesses exceptional photothermal capabilities, enabling the conversion of optical energy from visible and near infrared light to heat, thereby further enhancing the photocatalysis reaction. As a result, the cross-like core-shell FS@ZIS S-scheme heterojunction exhibits an excellent photocatalytic hydrogen evolution rate (7.640 mmol g-1 h-1), which is 24 times higher than that of pure ZIS (0.319 mmol g-1 h-1) under visible and near infrared light. Furthermore, employing more in-depth density functional theory calculations further investigates the charge transfer pathway of the FS@ZIS S-scheme heterojunction. This work provides insights into the construction of S-scheme heterojunctions with core-shell structure and photothermal effect for photocatalytic evolution hydrogen.

Highly efficient visible-light driven dye degradation via 0D BiVO4 nanoparticles/2D BiOCl nanosheets p-n heterojunctions

The construction of hybrid heterojunction photocatalysts is an effective strategy to improve the utilization of photogenerated carriers and photocatalytic activity. To enhance the separation distance of photogenerated carriers and accelerate the effective separation at the heterojunction of the interface, a unique 0D-2D hierarchical nanostructured p-n heterojunction was successfully fabricated in this work. BiOCl (BOC) nanosheets (p-type) were in situ grown on BiVO4 (BVO) nanoparticles (n-type) using the microemulsion-calcination method for highly efficient visible-light-driven organic dye degradation. Compared with pure BVO (the degradation rate of rhodamine B (RhB): about 32.0% in 55 min, the mineralization rate: 24.9% in 120 min), the RhB degradation rate can reach about 99.5% in 55 min and the mineralization rate of 62.1% in 120 min by utilizing BVO/25%BOC heterojunction photocatalyst under visible light irradiation. Various characterizations demonstrate that the formation of BVO/BOC p-n heterojunction greatly facilitates photogenerated carriers separation efficiency. Meanwhile, the results of the scavenging experiments and electron spin resonance tests indicate that ·O2- and h+ are the prominent active species for Rh B degradation. In addition, possible degradation pathways for Rh B were proposed using LC-MS tests. This work proves that building low dimensional p-n heterojunction photocatalysts is a promising strategy for developing photocatalysts with high efficiency.

Recent developments, advances and strategies in heterogeneous photocatalysts for water splitting

Photocatalytic water splitting (PWS) is an up-and-coming technology for generating sustainable fuel using light energy. Significant progress has been made in the developing of PWS innovations over recent years. In addition to various water-splitting (WS) systems, the focus has primarily been on one- and two-steps-excitation WS systems. These systems utilize singular or composite photocatalysts for WS, which is a simple, feasible, and cost-effective method for efficiently converting prevalent green energy into sustainable H2 energy on a large commercial scale. The proposed principle of charge confinement and transformation should be implemented dynamically by conjugating and stimulating the photocatalytic process while ensuring no unintentional connection at the interface. This study focuses on overall water splitting (OWS) using one/two-steps excitation and various techniques. It also discusses the current advancements in the development of new light-absorbing materials and provides perspectives and approaches for isolating photoinduced charges. This article explores multiple aspects of advancement, encompassing both chemical and physical changes, environmental factors, different photocatalyst types, and distinct parameters affecting PWS. Significant factors for achieving an efficient photocatalytic process under detrimental conditions, (e.g., strong light absorption, and synthesis of structures with a nanometer scale. Future research will focus on developing novel materials, investigating potential synthesis techniques, and improving existing high-energy raw materials. The endeavors aim is to enhance the efficiency of energy conversion, the absorption of radiation, and the coherence of physiochemical processes.

First Reusable Catalyst for the Reductive Coupling Reaction of Organohalides with Aldehydes

In this study, we simulate the reductive coupling (Barbier-Grignard-type) reaction of organohalides with aldehydes using a new reusable catalyst. In this regard, bimetallic alloys of NiCo encapsulated in melamine-based dendrimers (MBD) immobilized on magnetic nanoparticles symbolized as γ-Fe2O3-MBD/NiCo were designed and synthesized. The structure and properties of the catalyst were studied by a variety of techniques such as Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), vibrating sample magnetometry (VSM), energy-dispersive spectrometry (EDS) mapping, and inductively coupled plasma (ICP). The presence of NiCo nanoalloys was confirmed by XRD and XPS analysis, TEM images, and EDS mapping. Various secondary alcohols were produced in good to high yields by reductive coupling of different types of aldehydes and organohalides in the presence of HCO2K as a nonmetallic reducing agent in aqueous media catalyzed by γ-Fe2O3-MBD/NiCo. In these reactions, the high catalytic performance of γ-Fe2O3-MBD/NiCo was achieved in comparison to monometallic counterparts due to the synergistic cooperative effect of Co and Ni in the NiCo nanoalloys. Magnetic and hydrophilic properties of the catalyst facilitate the catalyst recyclability for seven runs. The reusability of γ-Fe2O3-MBD/NiCo, use of water as an environmentally friendly solvent, ease of processing, and absence of metal additives make this process an excellent choice for the reductive coupling reaction to produce secondary alcohols from aldehydes. This is the first report on these kinds of reactions using a reusable catalyst.

Oxygen Vacancies Defective La2Ti2O7 Nanosheets Enhanced Photocatalytic Activity of Hydrogen Evolution under Visible Light Irradiation

A novel and efficient technique has been designed for the creation of oxygen vacancies on La2Ti2O7 (LTO) nanosheets. This is achieved via a controlled solid-state reaction between NaBH4 and LTO nanosheets. Transmission electron microscopy (TEM) analyses expose that these processed LTO specimens possess a unique crystalline core/amorphous shell structure, represented as La2Ti2O7@La2Ti2O7-x. According to X-ray photoelectron spectroscopy (XPS) observations, there is a notable correlation between the reaction time, temperature, and the concentration of oxygen vacancies. The concentration of these vacancies tends to increase along with the reaction time and temperature. Concurrently, UV-Visible spectra and photocatalytic tests reveal a significant impact of oxygen vacancies on the LTO surface on both light absorption and photocatalytic functionality. Most notably, the LTO nanosheets with engineered oxygen vacancies have demonstrated an exceptional photocatalytic capacity for hydrogen production under visible light. The maximal activity recorded was an impressive 149 μmol g-1 h-1, which is noticeably superior to the performance of the pristine La2Ti2O7.

S modified manganese oxide for high efficiency of peroxydisulfate activation: Critical role of S and mechanism

Mn₂O₃ as a typical Mn based semiconductor has attracted growing attention due to its peculiar 3d electron structure and stability, and the multi-valence Mn on the surface is the key to peroxydisulfate activation. Herein, an octahedral structure of Mn₂O₃ with (111) exposed facet was synthesized by a hydrothermal method, which was further sulfureted to obtained a variable-valent Mn oxide for the high activation efficiency of peroxydisulfate under the light emitting diode irradiation. The degradation experiments showed that under the irradiation of 420 nm light, S modified manganese oxide showed an excellent removal for tetracycline within 90 min, which is about 40.4% higher than that of pure Mn₂O₃. In addition, the degradation rate constant k of S modified sample increased 2.17 times. Surface sulfidation not only increased the active sites and oxygen vacancies on the pristine Mn₂O₃ surface, but also changed the electronic structure of Mn due to the introduce of surface S^2-. This modification accelerated the electronic transmission during the degradation process. Meanwhile, the utilization efficiency of photogenerated electrons was greatly improved under light. Besides, the S modified manganese oxide had an excellent reuse performance after four cycles. The scavenging experiments and EPR analyses showed that •OH and ¹O₂ were the main reactive oxygen species. This study therefore provides a new avenue for further developing manganese-based catalysts towards high activation efficiency for peroxydisulfate.

A Medium-entropy oxide as a promising cocatalyst to promote photocatalytic hydrogen evolution

As emerging materials, medium-entropy oxides have attracted wide attention for the huge potential in energy storage, catalytic, magnetic and thermal applications. The electronic effect or the strong synergic effect caused by the construction of medium-entropy system leads to the unique properties of catalysis. In this contribution, we reported a medium-entropy CoNiCu oxide as an efficient cocatalyst for enhanced photocatalytic hydrogen evolution reaction. The target product was synthesized by a process of laser ablation in liquids and graphene oxide was applied as a conductive substrate of it, then it was loaded on the photocatalyst g-C₃N₄. The results showed that the modified photocatalysts exhibited the reduced [Formula: see text] and enhanced abilities of photoinduced charges separation and transfer. Furthermore, a maximum hydrogen production rate was measured to be 1177.52 μmol ·g^-1·h^-1 under the visible light irradiation, which was about 291 times higher than that of pure g-C₃N₄. These findings suggest that the medium-entropy CoNiCu oxide serves as an eminent cocatalyst, which offers a possible pathway towards the broadening of the applications of medium-entropy oxides and provides the alternatives to conventional cocatalysts.

Inner transition metal-modulated metal organic frameworks (IT-MOFs) and their derived nanomaterials: a strategic approach towards stupendous photocatalysis

Photocatalysis, as an amenable and effective process, can be adopted for pollution remediation and to alleviate the ongoing energy crisis. In this case, recently, metal organic frameworks (MOFs) have attracted increasing attention in the field of photocatalysis owning to their unique characteristics including large specific surface area, tuneable pore architecture, mouldable framework composition, tuneable band structure, and exceptional photon absorption tendency complimented with superior anti-recombination of excitons. Among the plethora of frameworks, inner transition metal based-MOFs (IT-MOFs) have started to garner significant traction as photocatalysts due to their distinct characteristics compared to conventional transition metal-based frameworks. Typically, IT-MOFs have the tendency to generate high nuclearity clusters and possess abundant Lewis acidic sites, together with mixed valency, which aids in easily converting redox couples, thereby making them a suitable candidate for various photocatalytic reactions. Therefore, in this contribution, we aim to summarise the excellent photocatalytic performance of IT-MOFs and their composites accompanied by a thorough discussion of their topological changes with a variation in the structure of the metal cluster, fabrication routes, morphological features, and physico-chemical properties together with a brief discussion of computational findings. Moreover, we attempt to explore the scientific understanding of the functionalities of IT-MOFs and their composites with detailed mechanistic pathways for in-depth clarity towards photocatalysis. Furthermore, we present a comprehensive analysis of IT-MOFs for various crucial photocatalytic applications such as H₂/O₂ evolution, organic pollutant degradation, organic transformation, and N₂ and CO₂ reduction. In addition, we discuss the measures employed to enhance their performance with some future directions to address the challenges with IT-MOF-based nanomaterials.

Recent advances in synthesis, structural properties, and regulation of nickel sulfide-based heterostructures for environmental water remediation: an insight review

Heterostructured nanomaterials exhibit pronounced potential in environmental science, including the water purification, pollutant monitoring, and environmental remediation. Especially, their application through advanced oxidation processes has been found capable and adaptable in waste water treatment. In semiconductor photocatalysts, metal sulfides are the leading materials. However, for further modifications, the progresses on specific materials need to be overviewed. Among metal sulfides, nickel sulfides are the emerging semiconductors due to relatively narrow band gaps, high thermal and chemical stability, and cost effectiveness. The aim of the present review is to conduct a thorough analysis and summary of recent progress in the application of nickel sulfide-based heterostructures in water decontamination. Initially, the review introduces the emerging needs of the materials for environment following the characteristics features of metal sulfides with emphasis on nickel sulfides. Subsequently, synthesis strategies and structural properties of nickel sulfide (NiS and NiS₂)-based photocatalysts are discussed. Herein, controlled synthesis procedures to influence their active structure, compositions, shape, and size for the enhanced photocatalytic performances are also considered. Furthermore, there is discussion on heterostructures formed by metal modification, metal oxides, and carbon hybridized nanocomposites. In the continuation, the modified characteristics are investigated which favors the photocatalytic processes for degradation of organic contaminations in water. The overall study highlights significant improvements in degradation efficiency of hetero-interfaced NiS and NiS₂ photocatalysts towards organics that are comparable to expensive noble-metal photocatalysts. Finally, we also added a little on prospects for future advancement of nickel sulfide-based photocatalysts for applications in sustainable environmental remediation.

Type-II CuFe2O4/Graphitic Carbon Nitride Heterojunctions for High-Efficiency Photocatalytic and Electrocatalytic Hydrogen Generation

Solar water splitting has emerged as an urgent imperative as hydrogen emerges as an increasingly important form of energy storage. g-C₃N₄ is an ideal candidate for photocatalytic water splitting as a result of the excellent alignment of its band edges with water redox potentials. To mitigate electron-hole recombination that has limited the performance of g-C₃N₄, we have developed a semiconductor heterostructure of g-C₃N₄ with CuFe₂O₄ nanoparticles (NPs) as a highly efficient photocatalyst. Visible-light-driven photocatalytic properties of CuFe₂O₄/g-C₃N₄ heterostructures with different CuFe₂O₄ loadings have been examined with two sacrificial agents. An up to 2.5-fold enhancement in catalytic efficiency is observed for CuFe₂O₄/g-C₃N₄ heterostructures over g-C₃N₄ nanosheets alone with the apparent quantum yield of H₂ production approaching 25%. The improved photocatalytic activity of the heterostructures suggests that introducing CuFe₂O₄ NPs provides more active sites and reduces electron-hole recombination. The g-C₃N₄/CuFe₂O₄ heterostructures furthermore show enhanced electrocatalytic HER activity as compared to the individual components as a result of which by making heterostructures g-C₃N₄ with CuFe₂O₄ increased the active catalytic surface for the electrocatalytic water splitting reaction. The enhanced faradaic efficiency of the prepared heterostructures makes it a potential candidate for efficient hydrogen generation. Nevertheless, the designed heterostructure materials exhibited significant photo- and electrocatalytic activity toward the HER, which demonstrates a method for methodically enhancing catalytic performance by creating heterostructures with the best energetic offsets.

2D/1D BiOI/g-C3N4 nanotubes heterostructure for photoelectrochemical overall water splitting

To boost the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performances, the BiOI/graphitic carbon nitride nanotubes (g-C₃N₄ nanotubes) heterojunction was synthesized herein through the hydrothermal method. BiOI in-situ grew on the surface of g-C₃N₄ nanotubes derived from melamine. The rapid recombination between photoexcited electrons and holes of pristine semiconductors was prevented via building the stable heterojunction. The SEM results indicated that the BiOI was wrapped around the surface of g-C₃N₄ nanotubes, resulting in an optimized electronic transmission pathway. Much lower charge transfer resistance at the p-n heterojunction was demonstrated compared with pristine BiOI according to the EIS results, thus leading to the faster surface reaction rates. Moreover, the composite exhibited both outstanding OER and HER activities under illuminated conditions. This study may shed light upon establishing a bifunctional photoelectrocatalysis for photoelectrochemical water splitting based on stable 2D metal and 1D metal-free nanocomposite.

The fabrication of graphitic carbon nitride hollow nanocages with semi-metal 1T' phase molybdenum disulfide as co-catalysts for excellent photocatalytic nitrogen fixation

Improving the efficiency of photogenerated carrier separation is essential for photocatalytic N₂ fixation. Herein, the 2D semi-metal 1T'-MoS₂ was uniformly distributed in g-C₃N₄ nanocages (CNNCs) by a hydrothermal method, and the 1T'-MoS₂/CNNC composite was obtained. 1T'-MoS₂ as a co-catalyst can promote the transfer of electrons, improve the separation efficiency of photogenerated carriers, and also increase the number of effective active sites. In addition, the unique nanocage morphology of CNNCs is conducive to the scattering and reflection of incident light and improves the light absorption capacity. Therefore, the optimized 1T'-MoS₂/CNNC composite (5 wt%) shows a significantly improved photocatalytic N₂ fixation rate (9.8 mmol L^-1 h^-1 g^-1) and good stability, which is significantly higher than pure CNNCs (2.9 mmol L^-1 h^-1 g^-1), Pt/CNNC (8.2 mmol L^-1 h^-1 g^-1) and Pt/g-C₃N₄ nanosheet (CNNS, 6.3 mmol L^-1 h^-1 g^-1). This work guides guidance for the design of green and efficient N₂ fixation photocatalysts.

Recent Progress in the Synthesis and Applications of Composite Photocatalysts: A Critical Review

Photocatalysis is an advanced technique that transforms solar energy into sustainable fuels and oxidizes pollutants via the aid of semiconductor photocatalysts. The main scientific and technological challenges for effective photocatalysis are the stability, robustness, and efficiency of semiconductor photocatalysts. For practical applications, researchers are trying to develop highly efficient and stable photocatalysts. Since the literature is highly scattered, it is urgent to write a critical review that summarizes the state-of-the-art progress in the design of a variety of semiconductor composite photocatalysts for energy and environmental applications. Herein, a comprehensive review is presented that summarizes an overview, history, mechanism, advantages, and challenges of semiconductor photocatalysis. Further, the recent advancements in the design of heterostructure photocatalysts including alloy quantum dots based composites, carbon based composites including carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and graphene, covalent-organic frameworks based composites, metal based composites including metal carbides, metal halide perovskites, metal nitrides, metal oxides, metal phosphides, and metal sulfides, metal-organic frameworks based composites, plasmonic materials based composites and single atom based composites for CO₂ conversion, H₂ evolution, and pollutants oxidation are discussed elaborately. Finally, perspectives for further improvement in the design of composite materials for efficient photocatalysis are provided.

Preparation of Bi3Fe0.5Nb1.5O9/g-C3N4 heterojunction photocatalysts and applications in the photocatalytic degradation of 2,4-dichlorophenol in environment

The energy band relationship and the active substances were studied to determine photocatalyst accords with the Z-type transfer mechanism.

Red Phosphorus: An Up-and-Coming Photocatalyst on the Horizon for Sustainable Energy Development and Environmental Remediation

Photocatalysis is a perennial solution that promises to resolve deep-rooted challenges related to environmental pollution and energy deficit through harvesting the inexhaustible and renewable solar energy. To date, a cornucopia of photocatalytic materials has been investigated with the research wave presently steered by the development of novel, affordable, and effective metal-free semiconductors with fascinating physicochemical and semiconducting characteristics. Coincidentally, the recently emerged red phosphorus (RP) semiconductor finds itself fitting perfectly into this category ascribed to its earth abundant, low-cost, and metal-free nature. More notably, the renowned red allotrope of the phosphorus family is spectacularly bestowed with strengthened optical absorption features, propitious electronic band configuration, and ease of functionalization and modification as well as high stability. Comprehensively detailing RP's roles and implications in photocatalysis, this review article will first include information on different RP allotropes and their chemical structures, followed by the meticulous scrutiny of their physicochemical and semiconducting properties such as electronic band structure, optical absorption features, and charge carrier dynamics. Besides that, state-of-the-art synthesis strategies for developing various RP allotropes and RP-based photocatalytic systems will also be outlined. In addition, modification or functionalization of RP with other semiconductors for promoting effective photocatalytic applications will be discussed to assess its versatility and feasibility as a high-performing photocatalytic system. Lastly, the challenges facing RP photocatalysts and future research directions will be included to propel the feasible development of RP-based systems with considerably augmented photocatalytic efficiency. This review article aspires to facilitate the rational development of multifunctional RP-based photocatalytic systems by widening the cognizance of rational engineering as well as to fine-tune the electronic, optical, and charge carrier properties of RP.

Recent advances in Co-based co-catalysts for efficient photocatalytic hydrogen generation

Recent progress in photocatalytic hydrogen generation reaction highlights the critical role of co-catalysts in enhancing the solar-to-fuel conversion efficiency of diverse band-matched semiconductors. Because of the compositional flexibility, adjustable microstructure, tunable crystal phase and facet, cobalt-based co-catalysts have stimulated tremendous attention as they have high potential to promote hydrogen evolution reaction. However, a comprehensive review that specifically focuses on these promising materials has not been reported so far. Therefore, this present review emphasizes the recent progress in the pursuing of highly efficient Co-based co-catalysts for water splitting, and the advances in such materials are summarized through the analysis of structure-activity relationships. The fundamental principles of photocatalytic hydrogen production are profoundly outlined, followed by an elaborate discussion on the crucial parameters influencingthe reaction kinetics. Then, the co-catalytic reactivities of various Co-based materials involving Co, Co oxides, Co hydroxides, Co sulfides, Co phosphides and Co molecular complexes, etc, are thoroughly discussed when they are coupled with host semiconductors, with an insight towards the ultimateobjective of achieving a rationally designed photocatalyst for enhancing water splitting reaction dynamics. Finally, the current challenge and future perspective of Co-based co-catalysts as the promising noble-metal alternative materials for solar hydrogen generation are proposed and discussed.

Engineering of g-C3N4-based photocatalysts to enhance hydrogen evolution

The technology of photocatalytic hydrogen production that converts abundant yet intermittent solar energy into an environmentally friendly alternative energy source is an attractive strategy to mitigate the energy crisis and environmental pollution. Graphitic carbon nitride (g-C₃N₄), as a promising photocatalyst, has gradually received focus in the field of artificial photosynthesis due to its appealing optical property, high chemical stability and easy synthesis. However, the limited light absorption and massive recombination of photoinduced carriers have hindered the photocatalytic activity of bare g-C₃N₄. Therefore, from the perspective of theoretical calculations and experiments, many valid approaches have been applied to rationally design the photocatalyst and ameliorate the hydrogen production performance, such as element doping, defect engineering, morphology tuning, and semiconductor coupling. This review summarized the latest progress of g-C₃N₄-based photocatalysts from two perspectives, modification of pristine g-C₃N₄ and interfacial engineering design. It is expected to offer feasible suggestions for the fabrication of low-cost and high-efficiency photocatalysts and the photocatalytic mechanism analyses assisted by calculation in the near future. Finally, the prospects and challenges of this exciting research field are discussed.

Identification of the Charge Transfer Channel in Cobalt Encapsulated Hollow Nitrogen-Doped Carbon Matrix@CdS Heterostructure for Photocatalytic Hydrogen Evolution

Water splitting to H₂ by photocatalysis remains an effective strategy to alleviate the energy crisis. Unfortunately, single-component photocatalyst still suffers from sluggish reaction kinetics. In this work, a noble-metal free photocatalytic system of nitrogen-doped carbon@Co embedded in carbon nanotubes (NC@Co-NCT)/cadmium sulfide (CdS) is fabricated by coupling CdS nanorods with the metal-organic framework-derived Co encapsulated nitrogen-doped carbon (NC) material. The optimal photocatalytic activity of NC@Co-NCT/CdS is determined to be 3.8 mmol h^-1  g^-1 , which is ≈5.8 times of CdS. By combining the experimental evidences and density functional theory calculations, a novel photoelectron transfer channel in the heterojunction interfaces is revealed, expediting the migration and separation of photo-induced charge carriers of CdS. Moreover, the presence of Co nanoclusters can act as the active sites, boosting the H₂ evolution reaction. This study can present a new avenue to design advanced photocatalysts with high-efficiency electrons and holes separation.

Catching and killing of airborne SARS-CoV-2 to control spread of COVID-19 by a heated air disinfection system

Airborne transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) via air-conditioning systems poses a significant threat for the continued escalation of the current coronavirus disease (COVID-19) pandemic. Considering that SARS-CoV-2 cannot tolerate temperatures above 70 °C, here we designed and fabricated efficient filters based on heated nickel (Ni) foam to catch and kill SARS-CoV-2. Virus test results revealed that 99.8% of the aerosolized SARS-CoV-2 was caught and killed by a single pass through a novel Ni-foam-based filter when heated up to 200 °C. In addition, the same filter was also used to catch and kill 99.9% of Bacillus anthracis, an airborne spore. This study paves the way for preventing transmission of SARS-CoV-2 and other highly infectious airborne agents in closed environments.

Phase Engineering of Iron-Cobalt Sulfides for Zn-Air and Na-Ion Batteries

Rechargeable batteries are promising platforms for sustainable development of energy conversion and storage technologies. Highly efficient multifunctional electrodes based on bimetallic sulfides for rechargeable batteries are extremely desirable but still challenging to tailor with controllable phase and structure. Here, we report a colloidal strategy to fabricate FeCo-based bimetallic sulfides on reduced graphene oxide (rGO), which are expected to display highly efficient oxygen electrocatalysis and sodium storage performances. Specifically, as-screened FeCo₈S₈ nanosheets (NSs) on rGO originating from suitable tailoring of the Co₉S₈ matrix with Fe at the atomic level exhibited a very low potential difference (0.77 V) at 10 mA cm^-2 and negligible voltage loss after 200 cycles as an air electrode for Zn-air batteries. For Na-ion batteries, FeCo₈S₈ NS/rGO demonstrated a superior high-rate capability (188 mAh g^-1 at 20 A g^-1) with long-term cycling stability. The bifunctional electrocatalytic property and sodium storage performance are attributed to not only the synergistic effect of Fe/Co but also the optimized catalytic activity and ion transport ability by the in situ rGO hybrid. This work demonstrates the potential applications of FeCo-based bimetallic sulfides as efficient electrode materials for both rechargeable Zn-air and Na-ion batteries.

A high-activity bimetallic OER cocatalyst for efficient photoelectrochemical water splitting of BiVO4

BiVO4 has been widely used as a photoanode material, while the slow surface oxygen evolution reaction (OER) kinetics still severely hinders its performance. Here, an efficient bimetallic cocatalyst (named FeSnOS) was obtained by post-annealing a Fe/Sn-containing metal chalcogenide coordination compound to enhance the OER activity of BiVO4. The synergistic effect of Fe and Sn species in the amorphous FeSnOS cocatalyst efficiently lowers the interface impedance of the photoanode, reduces the electrochemical reaction overpotential, and promotes the surface OER dynamics. At the same time, a type-II heterojunction was constructed due to the process of post-annealing, which efficiently improves the bulk phase charge separation efficiency of the photoanode. The obtained optimal photoanode (named FeSnOS-BiVO4) shows a photocurrent density of 3.1 mA cm-2 at 1.23 V vs. the reversible hydrogen electrode, which is 3.4 times higher than that of the pristine BiVO4 photoanode, and its onset potential shifts negatively from 0.44 V to 0.25 V. This work presents a simple and effective method to build a bimetallic cocatalyst for improved photoelectrochemical performance, which extends the application of polymetallic metal chalcogenide complexes.

Amorphous RuS2 electrocatalyst with optimized active sites for hydrogen evolution

Transition metal chalcogenides have attracted much attention as high-performance electrocatalysts for hydrogen evolution reaction (HER). Here, we synthesized an efficient HER electrocatalyst of amorphous ruthenium sulfide (A-RuS₂), exhibiting an overpotential of 141 mV at the current density of 10 mA cm^-2 and a Tafel slope of 65.6 mV dec^-1. Experiments demonstrate amorphous RuS₂ has much better catalytic activity than that of its crystalline counterparts. Our study shows that amorphous RuS₂ has increased intrinsic activity and active sites. This work provides a feasible strategy for the development of HER electrocatalysts in amorphous state.