Long-Shelf-Life Polymer Electrolyte Based on Tetraethylammonium Hydroxide for Flexible Zinc-Air Batteries

Tetramethylguanidine-Modified Graphene Oxide as a Gel Polymer Electrolyte Additive for Improving the Performance of Flexible Zinc-Air Batteries

Flexible zinc-air batteries (FZABs) present a promising solution for the next generation of power sources in wearable electronics, owing to their high energy density, cost-effectiveness, and safety. However, solid-state electrolytes for FZABs continue to face challenges related to rapid water loss and low ionic conductivity. In this study, a hydrophilic and stable tetramethylguanidine-modified graphene oxide as an additive, which is incorporated into sodium polyacrylate to develop a high-performance gel polymer electrolyte (GPE), is designed. The addition of additives makes GPE more hydrophilic, allowing for a wider hydrogen bonding network and more efficient ion transport channels. Due to its stable structure, abundant water channels and fast OH- conductivity, GPE also offers excellent mechanical properties, long-lasting water retention, and high ionic conductivity (173.9 mS cm-1). FZABs assembled with this GPE exhibit a high open-circuit voltage of 1.558 V, a cycle life of 230 h, a specific capacity of 810.3 mAh g-1, and a peak power density of 130.5 mW cm-2, coupled with impressive flexibility. These characteristics underscore their significant potential for applications in wearable electronics.

Composite Gel Polymer Electrolyte for High-Performance Flexible Zinc-Air Batteries

Enhancing ionic conductivity and electrolyte uptake is of significance for gel polymer electrolytes (GPEs) for flexible zinc-air batteries (FZABs). Herein, a composite mesoporous silica/polyacrylamide (5 wt.% mPAM) GPE is constructed with comparable ionic conductivity to aqueous electrolytes, where the ionic conductivity is up to 337 mS cm-1, and the weight loss after exposing in air 72 h is less than 18%, owing to the excellent electrolyte uptake and continuous ion migration network provided by the mesoporous silica fillers. When used as a quasi-solid-electrolyte, the rechargeable FZAB exhibited high electrochemical performance and structural stability, where the peak power density is up to 162.8 mW cm-2, and the initial charge-discharge potential gap is as low as 0.62 V, resulting in a long lifespan exceeding 110 h, showcasing the combination of high durability, cost-effectiveness and easy production for practical applications.

Recent Advances in Rechargeable Zn-Air Batteries

Rechargeable Zn-air batteries are considered to be an effective energy storage device due to their high energy density, environmental friendliness, and long operating life. Further progress on rechargeable Zn-air batteries with high energy density/power density is greatly needed to satisfy the increasing energy conversion and storage demands. This review summarizes the strategies proposed so far to pursue high-efficiency Zn-air batteries, including the aspects of the electrocatalysts (from noble metals to non-noble metals), the electrode chemistry (from the oxygen evolution reaction to the organic oxidation reaction), electrode engineering (from powdery to free-standing), aqueous electrolytes (from alkaline to non-alkaline) and the battery configuration (from liquid to flexible). An essential evaluation of electrochemistry is highlighted to solve the challenges in boosting the efficiency of rechargeable metal-air batteries. In the end, the perspective on current challenges and future research directions to promote the industrial application of rechargeable Zn-air batteries is provided.

Amorphous MnO2 Lamellae Encapsulated Covalent Triazine Polymer-Derived Multi-Heteroatoms-Doped Carbon for ORR/OER Bifunctional Electrocatalysis

The intelligent construction of non-noble metal materials that exhibit reversible oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) with bifunctional electrocatalytic performance is greatly coveted in the realm of zinc-air batteries (ZABs). Herein, a crafted structure-amorphous MnO2 lamellae encapsulated covalent triazine polymer-derived N, S, P co-doped carbon sphere (A-MnO2/NSPC) is designed using a self-doped pyrolysis coupled with an in situ encapsulation strategy. The customized A-MnO2/NSPC-2 demonstrates a superior bifunctional electrocatalytic performance, confirmed by a small ΔE index of 0.64 V for ORR/OER. Experimental investigations, along with density functional theory calculations validate that predesigned amorphous MnO2 surface defects and abundant heteroatom catalytic active sites collectively enhance the oxygen electrocatalytic performance. Impressively, the A-MnO2/NSPC-based rechargeable liquid ZABs show a large open-circuit potential of 1.54 V, an ultrahigh peak power density of 181 mW cm-2, an enormous capacity of 816 mAh g-1, and a remarkable stability for more than 1720 discharging/charging cycles. Additionally, the assembled flexible all-solid-state ZABs also demonstrate outstanding cycle stability, surpassing 140 discharging/charging cycles. Therefore, this highly operable synthetic strategy offers substantial understanding in the development of magnificent bifunctional electrocatalysts for various sustainable energy conversions and beyond.

Bimetallic-Coordinated Covalent Triazine Framework-Derived FeNi Alloy Nanoparticle-Decorated Coral-Like Nanocarbons for Oxygen Electrocatalysis

It is highly desirable to fabricate transition bimetallic alloy-embedded porous nanocarbons with a unique nanoarchitecture for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) in rechargeable zinc-air batteries. In this work, we introduce a template-assisted in situ alloying synthesis of FeNi alloy nanoparticle-decorated coral-like nanocarbons (FeNi-CNCs) as efficient OER/ORR dual-functional electrocatalysts. The present materials are produced through polycondensation of a covalent triazine framework (CTF), the coordination of Ni and Fe ions, and sequential pyrolytic treatment. Through the pyrolysis process, the nanolamellar FeNi-CTF precursors can be facilely converted into FeNi alloy nanoparticle-decorated nanocarbons. These nanocarbons possess a distinctive three-dimensional (3D) coral-like nanostructure, which is favorable for the transport of oxygen and the diffusion of electrolyte. As a result, FeNi-CNC-800 with the highest efficiency exhibited remarkable electrocatalytic performance and great durability. Additionally, it also can be assembled into rechargeable zinc-air batteries that can be assembled in both liquid and solid forms, offering a superior peak power density, large specific capacity, and outstanding reusability during charging/discharging cycles (e.g., 5160 charging-and-discharging cycles at 10 mA cm-2 for the liquid forms). These traits make it a highly promising option in the burgeoning field of wearable energy conversion.

Rechargeable Zinc-Air Batteries: Advances, Challenges, and Prospects

Rechargeable zinc-air batteries (Re-ZABs) are one of the most promising next-generation batteries that can hold more energy while being cost-effective and safer than existing devices. Nevertheless, zinc dendrites, non-portability, and limited charge-discharge cycles have long been obstacles to the commercialization of Re-ZABs. Over the past 30 years, milestone breakthroughs have been made in technical indicators (safety, high energy density, and long battery life), battery components (air cathode, zinc anode, and gas diffusion layer), and battery configurations (flexibility and portability), however, a comprehensive review on advanced design strategies for Re-ZABs system from multiple angles is still lacking. This review underscores the progress and strategies proposed so far to pursuit the high-efficiency Re-ZABs system, including the aspects of rechargeability (from primary to rechargeable), air cathode (from unifunctional to bifunctional), zinc anode (from dendritic to stable), electrolytes (from aqueous to non-aqueous), battery configurations (from non-portable to portable), and industrialization progress (from laboratorial to practical). Critical appraisals of the advanced modification approaches (such as surface/interface modulation, nanoconfinement catalysis, defect electrochemistry, synergistic electrocatalysis, etc.) are highlighted for cost-effective flexible Re-ZABs with good sustainability and high energy density. Finally, insights are further rendered properly for the future research directions of advanced zinc-air batteries.

Improving Cycle Life of Zinc-Air Batteries with Calcium Ion Additive in Electrolyte or Separator

The electrolyte carbonation and the resulting air electrode plugging are the primary factors limiting the cycle life of aqueous alkaline zinc-air batteries (ZABs). In this work, calcium ion (Ca²⁺) additives were introduced into the electrolyte and the separator to resolve the above issues. Galvanostatic charge-discharge cycle tests were carried out to verify the effect of Ca²⁺ on electrolyte carbonation. With the modified electrolyte and separator, the cycle life of ZABs was improved by 22.2% and 24.7%, respectively. Ca²⁺ was introduced into the ZAB system to preferentially react with CO₃^2- rather than K⁺ and then precipitated granular CaCO₃ prior to K₂CO₃, which was deposited on the surface of the Zn anode and air cathode to form a flower-like CaCO₃ layer, thereby prolonging its cycle life.

Recent advances in zinc-air batteries: self-standing inorganic nanoporous metal films as air cathodes

Zinc-air batteries (ZABs) have promising prospects as next-generation electrochemical energy systems due to their high safety, high power density, environmental friendliness, and low cost. However, the air cathodes used in ZABs still face many challenges, such as the low catalytic activity and poor stability of carbon-based materials at high current density/voltage. To achieve high activity and stability of rechargeable ZABs, chemically and electrochemically stable air cathodes with bifunctional oxygen reduction reaction (ORR)/oxygen evolution reaction (OER) activity, fast reaction rate with low platinum group metal (PGM) loading or PGM-free materials are required, which are difficult to achieve with common electrocatalysts. Meanwhile, inorganic nanoporous metal films (INMFs) have many advantages as self-standing air cathodes, such as high activity and stability for both the ORR/OER under highly alkaline conditions. The high surface area, three-dimensional channels, and porous structure with controllable crystal growth facet/direction make INMFs an ideal candidate as air cathodes for ZABs. In this review, we first revisit some critical descriptors to assess the performance of ZABs, and recommend the standard test and reported manner. We then summarize the recent progress of low-Pt, low-Pd, and PGM-free-based materials as air cathodes with low/non-PGM loading for rechargeable ZABs. The structure-composition-performance relationship between INMFs and ZABs is discussed in-depth. Finally, we provide our perspectives on the further development of INMFs towards rechargeable ZABs, as well as current issues that need to be addressed. This work will not only attract researchers' attention and guide them to assess and report the performance of ZABs more accurately, but also stimulate more innovative strategies to drive the practical application of INMFS for ZABs and other energy-related technologies.

All-Printed 3D Solid-State Rechargeable Zinc-Air Microbatteries

Lightweight, compact, integrated, and miniaturized energy devices are under high pursuit for portable and wearable electronics. However, improving the energy density per area still remains a long-standing challenge. Herein, we report the design and fabrication of a solid-state zinc-air microbattery (ZAmB) by a facile 3D direct printing technique. The interdigital electrodes, gel electrolyte, and encapsulation frame are all printed with a customized design by optimzing the composition of the printing inks to obtain the best battery performance. Multiple layers of interdigital electrodes are sequentially printed with a fine overlap to achieve an ultrahigh thickness of 2.5 mm for a remarkably increased specific areal energy of up to 77.2 mWh cm^-2. To meet the practical powering requirements for different output voltages and currents, battery modules consisting of individual ZAmBs connected in series or parallel or a combination of the two are printed with a facile integration to external loads. Powering of LEDs, digital watch, and a miniature rotary motor and even charging of a smartphone by the printed ZAmB modules are successfully demonstrated. The versatile 3D direct printing technique enables the fabricated ZAmBs with an adjustable form factor and integration capability with other electronics, paving the way for exploring new energy systems with diverse structures and extended functionalities.

Regulation of Released Alkali from Gel Polymer Electrolyte in Quasi-Solid State Zn-Air Battery

Gel polymer electrolyte (GPE) in quasi-solid state Zn-air battery (QSZAB) will release alkali during cycling, resulting in gradual dehydration of GPE, corrosion of Zn electrode, Zn dendrites growth, and therefore inferior performance. Here, hollow Sn microspheres are prepared on Zn substrate by the technique of colloidal self-assembly. The inner surfaces of hollow Sn microspheres are modified by 2-hydroxypropyl-β-cyclodextrin (hollow Sn-inner HPβCD) to regulate the released alkali at GPE|anode interface. The hollow Sn-inner HPβCD can lessen the leakage of released alkali, make stored alkali diffuse back to GPE during the charging process, and mitigate the loss of soluble Zn(OH)₄ ^2- to suppress Zn dendrites growth. Resultantly, GPE in QSZAB with hollow Sn-inner HPβCD exhibits a high retention capacity for alkaline solution. The cell also exhibits a long cyclic lifespan of 127 h due to the effective regulation of released alkali, which outperforms QSZAB without hollow Sn-inner HPβCD by 7.94 times. This work rivets the regulation of released alkali at GPE|anode interface, providing new insight to improve QSZABs' performance.

Rational Design of Flexible Zn-Based Batteries for Wearable Electronic Devices

The advent of 5G and the Internet of Things has spawned a demand for wearable electronic devices. However, the lack of a suitable flexible energy storage system has become the "Achilles' Heel" of wearable electronic devices. Additional problems during the transformation of the battery structure from conventional to flexible also present a severe challenge to the battery design. Flexible Zn-based batteries, including Zn-ion batteries and Zn-air batteries, have long been considered promising candidates due to their high safety, eco-efficiency, substantial reserve, and low cost. In the past decade, researchers have come up with elaborate designs for each portion of flexible Zn-based batteries to improve the ionic conductivities, mechanical properties, environment adaptabilities, and scalable productions. It would be helpful to summarize the reported strategies and compare their pros and cons to facilitate further research toward the commercialization of flexible Zn-based batteries. In this review, the current progress in developing flexible Zn-based batteries is comprehensively reviewed, including their electrolytes, cathodes, and anodes, and discussed in terms of their synthesis, characterization, and performance validation. By clarifying the challenges in flexible Zn-based battery design, we summarize the methodology from previous investigations and propose challenges for future development. In the end, a research paradigm of Zn-based batteries is summarized to fit the burgeoning requirement of wearable electronic devices in an iterative process, which will benefit the future development of Zn-based batteries.

Interface Engineering of Zinc Electrode for Rechargeable Alkaline Zinc-Based Batteries

Rechargeable aqueous zinc-based batteries have gained considerable interest because of their advantages of high theoretical capacity, being eco-friendly, and cost effectiveness. In particular, zinc-based batteries with alkaline electrolyte show great promise due to their high working voltage. However, there remain great challenges for the commercialization of the rechargeable alkaline zinc-based batteries, which are mainly impeded by the limited reversibility of the zinc electrode. The critical problems refer to the dendrites growth, electrode passivation, shape change, and side reactions, affecting discharge capacity, columbic efficiency, and cycling stability of the battery. All the issues are highly associated with the interfacial properties, including both electrons and ions transport behavior at the electrode interface. Herein, this work concentrates on the fundamental electrochemistry of the challenges in the zinc electrode and the design strategies for developing high-performance zinc electrodes with regard to optimizing the interfaces between host and active materials as well as electrode and electrolyte. In addition, potential directions for the investigation of electrodes and electrolytes for high-performance zinc-based batteries are presented, aiming at promoting the development of rechargeable alkaline zinc-based batteries.

Opportunities of Flexible and Portable Electrochemical Devices for Energy Storage: Expanding the Spotlight onto Semi-solid/Solid Electrolytes

The ever-increasing demand for flexible and portable electronics has stimulated research and development in building advanced electrochemical energy devices which are lightweight, ultrathin, small in size, bendable, foldable, knittable, wearable, and/or stretchable. In such flexible and portable devices, semi-solid/solid electrolytes besides anodes and cathodes are the necessary components determining the energy/power performances. By serving as the ion transport channels, such semi-solid/solid electrolytes may be beneficial to resolving the issues of leakage, electrode corrosion, and metal electrode dendrite growth. In this paper, the fundamentals of semi-solid/solid electrolytes (e.g., chemical composition, ionic conductivity, electrochemical window, mechanical strength, thermal stability, and other attractive features), the electrode-electrolyte interfacial properties, and their relationships with the performance of various energy devices (e.g., supercapacitors, secondary ion batteries, metal-sulfur batteries, and metal-air batteries) are comprehensively reviewed in terms of materials synthesis and/or characterization, functional mechanisms, and device assembling for performance validation. The most recent advancements in improving the performance of electrochemical energy devices are summarized with focuses on analyzing the existing technical challenges (e.g., solid electrolyte interphase formation, metal electrode dendrite growth, polysulfide shuttle issue, electrolyte instability in half-open battery structure) and the strategies for overcoming these challenges through modification of semi-solid/solid electrolyte materials. Several possible directions for future research and development are proposed for going beyond existing technological bottlenecks and achieving desirable flexible and portable electrochemical energy devices to fulfill their practical applications. It is expected that this review may provide the readers with a comprehensive cross-technology understanding of the semi-solid/solid electrolytes for facilitating their current and future researches on the flexible and portable electrochemical energy devices.

Polymeric Single-Ion Conductors with Enhanced Side-Chain Motion for High-Performance Solid Zinc-Ion Batteries

Zn-based solid polymer electrolytes (SPEs) have enormous potential in realizing high-performance zinc-ion batteries. Polymeric single-ion conductor (PSIC)-based SPEs can largely eradicate anion migration and side reactions of electrodes with decreased polarization, but the ionic conductivity is still unsatisfactory due to the tight localized ion interactions and sluggish chain motion. Herein, by employing the heterocyclic tetrazole as the anionic center of the side chain, a novel PSIC is fabricated with optimized charge delocalization and enhanced side-chain motion. The as-prepared PSIC delivers an ionic conductivity up to 5.4 × 10^-4 S cm^-1 with an ultrahigh Zn²⁺ transference number of 0.94. Based on the PSIC, dendrite-free and hydrogen-free Zn plating/stripping cycling (2000 h) is achieved. A further assembled Zn‖V₂ O₅ battery exhibits superior performances to other solid ZIBs, including a high discharge capacity, excellent rate capability, and long cycling life. In addition, a remarkable shelf-life (90 d), low self-discharge rate, and good temperature adaptability of the solid battery can be achieved benefiting from the high stability of the SPE during operation. The PSIC-based SPEs with advanced ion-transport structure endow solid ZIBs with significant performance improvement, high safety, and durability.

Development of electrolytes for rechargeable zinc-air batteries: current progress, challenges, and future outlooks

This review presents the current developments of various electrolyte systems for secondary zinc air batteries (SZABs). The challenges and advancements in aqueous electrolytes (e.g., alkaline, acidic and neutral) and non-aqueous electrolytes (e.g., solid polymer electrolyte, ionic liquids, gel polymer electrolyte, and deep eutectic solvents) development have been reviewed. Moreover, chemical and physical characteristics of electrolytes such as power density, capacity, rate performance, cyclic ability, and safety that play a vital role in recital of the SZABs have been reviewed. Finally, the challenges and limitations that must be investigated and possible future research areas of SZABs electrolytes are discussed.

Design of co-continuous structure of cellulose/PAA-based alkaline solid polyelectrolyte for flexible zinc-air battery

In order to prepare high ionic conductivity and robust mechanical properties of alkaline solid polyelectrolyte (ASPE) for applications in flexible wearable devices, a co-continuous structure membrane was designed using in-situ polymerization to introduce cross-linked polyacrylic acid (N-PAA) into the cellulose network constructed by regenerated degreasing cotton (RDC). The resultant ASPE membrane showed high ionic conductivity (430 mS·cm^-1 at 25 °C), strong mechanical properties, and excellent alkaline stabilities, proving the viability of cellulose for use in energy storage systems. Surprisingly, the sandwich-shaped zinc-air battery assembled using RDC/N-PAA/KOH membranes as electrolytes exhibits superior values of cycling stability, discharge time, specific capacity (731.5 mAh·g^-1), peak power density (40.25 mW·cm^-2), and mechanical flexibility. Even under bending conditions, the zinc-air batteries still possess stable energy supply performance, suggesting this novel solid polyelectrolyte has promising application for wearable technology.

Interconnected Hollow Porous Polyacrylonitrile-Based Electrolyte Membrane for a Quasi-Solid-State Flexible Zinc-Air Battery with Ultralong Lifetime

Quasi-solid-state flexible zinc-air batteries (FZABs) have received enormous attention due to their low cost and high safety. However, the constraints in lifetime resulting from the lack of stable quasi-solid-state electrolyte membranes and efficient bifunctional electrocatalysts toward oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) hinder the large-scale manufacture and commercialization of FZABs to power electric devices. Herein, a polyacrylonitrile (PAN)-based membrane (HPPANP) fabricated via facile coaxial electrospinning, water dissolution, lyophilization, and KOH preimmersion method was utilized as the quasi-solid-state electrolyte membrane. The interconnected hollow porous structure based on PAN nanofibers endows HPPANP with outstanding electrolyte-uptake/retention capabilities for high ionic conductivity and nanolevel wetted electrolyte/anode interface for uniform Zn dissolution/deposition, thus prolonging the lifespan of the FZABs. In addition, the in situ alkaline hydrolysis of KOH solution supplies HPPANP with abundant oxygen-containing groups, which also improves its ionic conductivity. Additionally, we synthesized a Co/N-doped hollow carbon sphere (CoN-CS) electrocatalyst that exhibits superior ORR and OER electrocatalytic activities with a low potential difference (ΔE) of 0.73 V. Such favorable ORR and OER performances can be mainly attributed to the hierarchical hollow micro/nanostructures with abundant active sites, long-term stability, and favorable electron/ion diffusion pathway. As a result, the assembled FZAB equipped with the CoN-CS catalyst and HPPANP displays high power density (123.8 mW cm^-2) and preferable long-term cycling performance (more than 50 h at 3 mA cm^-2).

Research Progresses and Challenges of Flexible Zinc Battery

Flexible zinc batteries have great potential in wearable electronic devices due to their high safety, low cost, and environmental friendliness. In the past few years, a great deal of work on flexible zinc batteries has been reported, with exciting results. Therefore, many solutions have been proposed in electrode design and electrolyte preparation to ensure the desired flexibility without sacrificing the capacity. This paper reviews the recent progress of flexible zinc batteries. We discuss the differences between various anode materials, cathode materials, and electrolytes, introduce the differences of electrode preparation methods of active materials on flexible substrates and their influence on the performance of the battery. Finally, the challenges and future research trends of flexible zinc batteries in capacity and mechanical properties are pointed out.

Potassium Polyacrylate-Based Gel Polymer Electrolyte for Practical Zn-Ni Batteries

Because of their high theoretical value of volumetric energy density, excellent rate performance, and high level of safety, zinc-nickel batteries (ZNBs) show potential applications for uninterrupted power supply (UPS) systems. However, despite all the advantages of ZNBs, the commercial application of ZNBs has been prevented by their short lifetime caused by the shape change, the corrosion, and the dendrite formation of the Zn anode. In this work, we proposed a flexible and durable potassium polyacrylate (PAAK)-KOH gel polymer electrolyte (GPE) prepared in a very simple way to solve the above problems of the Zn anode. The obtained highly porous gel electrolyte showed higher water retention, satisfying ionic conductivity (0.918 S cm-1), and a broad electrochemical stable voltage window. By providing a stable and homogeneous electrode/electrolyte interface for the Zn anode, the gel electrolyte can inhibit the uneven deposition and dendrite formation. As a result, the gel electrolyte greatly prolonged the cycling life to 776 h. In addition, because of the considerably batter corrosion resistance of the Zn anode in the PAAK-KOH GPE, the ZNB with gel electrolyte also exhibited a superior shelf life of more than 431 h and a superior cycling performance under float charge for more than 400 h at 60 °C. This work demonstrates that the gel electrolyte with a simple preparation method is suitable for large-scale practical production and can be successfully used in Zn-Ni batteries as an electrolyte exhibiting excellent performance.

Recent Advances in Flexible Zn-Air Batteries: Materials for Electrodes and Electrolytes

Flexible Zn-air batteries (ZABs) draw much attention due to the merits of high energy density, stability, and safety, and show potential applications for wearable devices. However, the development of flexible ZABs with great energy density, high round-trip efficiency, and long cycle life for practical applications is highly restricted by the lack of highly active oxygen catalysts, high ion-conducting solid-state electrolytes, appropriate Zn anodes, and advanced battery configuration. Promising oxygen catalysts should possess both, superior oxygen reduction reaction and oxygen evolution reaction performance and can be directly used as self-supporting cathodes without loading catalysts on support materials such as carbon cloth. In addition, electrolytes play an important role in ZABs; a good electrolyte should be in all-solid state with high ion conductivity. Moreover, for an excellent Zn anode, it is required to stably contact the electrolyte interface during the bending process. Therefore, in this review, recent advances in ZABs are summarized, including: i) the powder and 3D self-supporting oxygen catalysts, ii) the species of solid-state electrolytes, and iii) the rational design of Zn anodes. Finally, the challenges and opportunities of this promising field are presented.

Ultrastretchable and Stable Conductive Elastomer Based on Micro-Ionicgel for Wide-Working-Range Sensors

A facile route to novel stretchable conductive elastomers with micro-ionicgel acting as conductive fillers was developed via oil-in-oil Pickering emulsion polymerization of nonpolar monomers A and a mixture of polar monomers B and ionic liquids (ILs). Oil-in-oil Pickering emulsions were first fabricated by mixing n-butyl acrylate (n-BA), acrylic acid (AA), ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, [EMIM]+[BF4]-), and alkyl vinyl-functionalized silica particles. The emulsion structure was directly observed using the dye-labeled AA-IL phase by confocal fluorescence microscopy. Upon polymerization, the IL-based conductive composite elastomers were obtained, where the continuous phase and the dispersed phase are poly(n-butyl acrylate) (PnBA) and poly(acrylic acid) containing ILs (PAA-ILs, referred to as micro-ionicgel), respectively. The PnBA matrix endows the formed elastomer with extremely large stretchability (up to 12 000% strain) and insensitivity to moisture. The micro-ionicgels PAA-ILs not only contribute to good conductivity but can also prevent the leakage of ILs upon stretching or folding. The electrical impedance-based stretchable sensors fabricated using this IL elastomer could detect various human motions including the bending of a finger, wrist, elbow, and knee. Therefore, the as-developed sensors show promising applications for human-machine interfaces of flexible wearable sensors.

Mapping the Design of Electrolyte Materials for Electrically Rechargeable Zinc-Air Batteries

Electrically rechargeable zinc-air batteries (ERZABs) have attracted substantial research interest as one of the best candidate power sources for electric vehicles, grid-scale energy storage, and portable electronics owing to their high theoretical capacity, low cost, and environmental benignity. However, the realization of ERZABs with long cycle life and high energy and power densities is still a considerable challenge. The electrolyte, which serves as the ionic conductor, is one of the core components of ERZABs, as it plays a significant role during the discharge-charge process and greatly influences the rechargeability, operating voltage, lifespan, power density, and safety of ERZABs. Herein, the fundamental electrochemistry of electrolyte materials for ERZABs and the associated challenges are presented. Furthermore, recent advances in electrolyte materials for ERZABs, including alkaline aqueous electrolytes, nonalkaline electrolytes, ionic liquids, and semisolid-state electrolytes are discussed. This work aims to provide insights into the future exploration of high-performance electrolytes and thus promote the development of ERZABs.

Influencing Factors of Performance Degradation of Zinc–Air Batteries Exposed to Air

Zinc–air batteries feature high energy density, but they usually suffer from their short storage life after they start working, restricting their commercial applications. In the past, scholars did not reach an agreement on the influencing factors of the performance degradation of zinc–air batteries when exposed to air. Here, a series of comparative experiments were conducted to confirm the changes of the battery during storage after being exposed to air. The morphology and composition of the components of the battery were characterized by scanning electron microscopy (SEM) and X-ray diffraction analyses. SEM images revealed that with the increase of storage days, the corrosion of the zinc anode gradually deepens, but the surface morphology of the air cathode does not change much. The electrolyte of the batteries stored for different periods was examined through inductively coupled plasma spectroscopy and titration. After 20 days of storage, the concentration of CO32− reached 2.694 mol L−1, which indicates that more than 80% of the OH− in the electrolyte was consumed. The results show that after being exposed to air, the carbonation of the electrolyte is the main cause of the battery capacity decay.

Ultrasound-Triggered Assembly of Covalent Triazine Framework for Synthesizing Heteroatom-Doped Carbon Nanoflowers Boosting Metal-Free Bifunctional Electrocatalysis

The construction of multiple heteroatom-doped porous carbon with unique nanoarchitectures and abundant heteroatom active sites is promising for reversible oxygen-involving electrocatalysis. However, most of the synthetic methods required the use of templates to construct precisely designed nanostructured carbon. Herein, we introduced an ultrasound-triggered route for the synthesis of a piperazine-containing covalent triazine framework (P-CTF). The ultrasonic energy triggered both the polycondensation of monomers and the assembly into a nanoflower-shaped morphology without utilizing any templates. Subsequent carbonization of P-CTF led to the formation of nitrogen, phosphorus, and fluorine tri-doped porous carbon (NPF@CNFs) with a well-maintained nanoflower morphology. The resultant NPF@CNFs showed high electrocatalytic activity and stability toward bifunctional electrolysis, which was better than the commercial Pt/C and IrO₂ electrocatalysts toward oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), respectively. As a further demonstration, employing NPF@CNFs as air electrode materials resulted in an excellent performance of liquid-state and solid-state Zn-air batteries, showing great potentials of the obtained multiple heteroatom-doped porous carbon electrocatalysts for wearable electronics.

Recoverable peroxidase-like Fe3O4@MoS2-Ag nanozyme with enhanced antibacterial ability

Antibacterial agents with enzyme-like properties and bacteria-binding ability have provided an alternative method to efficiently disinfect drug-resistance microorganism. Herein, a Fe₃O₄@MoS₂-Ag nanozyme with defect-rich rough surface was constructed by a simple hydrothermal method and in-situ photodeposition of Ag nanoparticles. The nanozyme exhibited good antibacterial performance against E. coli (~69.4%) by the generated ROS and released Ag⁺, while the nanozyme could further achieve an excellent synergistic disinfection (~100%) by combining with the near-infrared photothermal property of Fe₃O₄@MoS₂-Ag. The antibacterial mechanism study showed that the antibacterial process was determined by the collaborative work of peroxidase-like activity, photothermal effect and leakage of Ag⁺. The defect-rich rough surface of MoS₂ layers facilitated the capture of bacteria, which enhanced the accurate and rapid attack of •OH and Ag⁺ to the membrane of E. coli with the assistance of local hyperthermia. This method showed broad-spectrum antibacterial performance against Gram-negative bacteria, Gram-positive bacteria, drug-resistant bacteria and fungal bacteria. Meanwhile, the magnetism of Fe₃O₄ was used to recycle the nanozyme. This work showed great potential of engineered nanozymes for efficient disinfection treatment.

A Review of the Use of GPEs in Zinc-Based Batteries. A Step Closer to Wearable Electronic Gadgets and Smart Textiles

With the flourish of flexible and wearable electronics gadgets, the need for flexible power sources has become essential. The growth of this increasingly diverse range of devices boosted the necessity to develop materials for such flexible power sources such as secondary batteries, fuel cells, supercapacitors, sensors, dye-sensitized solar cells, etc. In that context, comprehensives studies on flexible conversion and energy storage devices have been released for other technologies such Li-ion standing out the importance of the research done lately in GPEs (gel polymer electrolytes) for energy conversion and storage. However, flexible zinc batteries have not received the attention they deserve within the flexible batteries field, which are destined to be one of the high rank players in the wearable devices future market. This review presents an extensive overview of the most notable or prominent gel polymeric materials, including biobased polymers, and zinc chemistries as well as its practical or functional implementation in flexible wearable devices. The ultimate aim is to highlight zinc-based batteries as power sources to fill a segment of the world flexible batteries future market.

Enhanced Cycling Performance of Rechargeable Zinc-Air Flow Batteries Using Potassium Persulfate as Electrolyte Additive

Zinc-air batteries (ZABs) offer high specific energy and low-cost production. However, rechargeable ZABs suffer from a limited cycle life. This paper reports that potassium persulfate (KPS) additive in an alkaline electrolyte can effectively enhance the performance and electrochemical characteristics of rechargeable zinc-air flow batteries (ZAFBs). Introducing redox additives into electrolytes is an effective approach to promote battery performance. With the addition of 450 ppm KPS, remarkable improvement in anodic currents corresponding to zinc (Zn) dissolution and limited passivation of the Zn surface is observed, thus indicating its strong effect on the redox reaction of Zn. Besides, the addition of 450 ppm KPS reduces the corrosion rate of Zn, enhances surface reactions and decreases the solution resistance. However, excess KPS (900 and 1350 ppm) has a negative effect on rechargeable ZAFBs, which leads to a shorter cycle life and poor cyclability. The rechargeable ZAFB, using 450 ppm KPS, exhibits a highly stable charge/discharge voltage for 800 cycles. Overall, KPS demonstrates great promise for the enhancement of the charge/discharge performance of rechargeable ZABs.

Pollen-derived porous carbon decorated with cobalt/iron sulfide hybrids as cathode catalysts for flexible all-solid-state rechargeable Zn-air batteries

The development of flexible all-solid-state rechargeable Zn-air batteries (FS-ZABs) for wearable applications faces challenges from the balance between performance and flexibility of the battery; efficient cathode catalyst and reasonable electrode construction design are key factors. Herein, a low-cost pollen derived N,S co-doped porous carbon decorated with Co9S8/Fe3S4 nanoparticle hybrids (Co-Fe-S@NSRPC) has been synthesized. Owing to the active Co9S8/Fe3S4 nanoparticles, N,S co-doping, and large specific area of the pollen derived porous carbon matrix, the Co-Fe-S@NSRPC composite exhibits an excellent bifunctional catalytic activity with a small potential gap (ΔE = 0.80 V) between the half-wave potential for the ORR (0.80 V) and the potential at 10 mA cm-2 for the OER (1.60 V), and endows a liquid Zn-air battery with a high power density of 138 mW cm-2, a larger specific capacity of 891 mA h g-1 and a stable rechargeability of up to 331 cycles. Based on the Co-Fe-S@NSRPC cathode catalyst, a 2D coplanar FS-ZAB has been fabricated with specially designed parallel narrow strip electrodes alternately arrayed on a polyacrylamide polyacrylic acid copolymer hydrogel solid electrolyte. The presented FS-ZAB exhibits excellent battery performance with high open-circuit-voltage (1.415 V), competitive peak power density (78 mW cm-2), large specific capacity (785 mA h g-1) and stable rechargeability (150 cycles), offers robust flexibility to maintain stable charge/discharge capacity under different bending deformations, and provides convenient coplanar integrability to realize parallel or series connection of multiple cells in a relatively small area.

Recent Progress in Electrolytes for Zn-Air Batteries

Zn-air battery is considered as one of the most promising candidates for next-generation batteries for energy storage due to safety, high energy density, and low cost. There are many challenges in electrolytes for developing high-performance rechargeable Zn-air cells as well as electrocatalysts. An electrolyte is the crucial part of the rechargeable Zn-air batteries that determine their capacity, cycling stability, and lifetime. This paper reviews the most recent progress in designing and fabricating electrolytes in aqueous and flexible Zn-air batteries. The discussion on the surface reaction relationships was covered between air-catalyst-electrolyte and electrolyte-zinc reaction mechanism. We highlight the recent developments of three different electrolytes in zinc-air battery: aqueous electrolyte, room temperature ionic liquid, and quasi-solid flexible electrolyte. Furthermore, the general perspective is proposed for designing and fabricating electrolytes to improve the performance and prolong the lifetime of Zn-air batteries.

Alkaline Double-Network Hydrogels with High Conductivities, Superior Mechanical Performances, and Antifreezing Properties for Solid-State Zinc-Air Batteries

For the development of advanced flexible and wearable electronic devices, functional electrolytes with excellent conductivity, temperature tolerance, and desirable mechanical properties need to be engineered. Herein, an alkaline double-network hydrogel with high conductivity and superior mechanical and antifreezing properties is designed and promisingly utilized as the flexible electrolyte in all-solid-state zinc-air batteries. The conductive hydrogel is comprised of covalently cross-linked polyelectrolyte poly(2-acrylamido-2-methylpropanesulfonic acid potassium salt) (PAMPS-K) and interpenetrating methyl cellulose (MC) in the presence of concentrated alkaline solutions. The covalently cross-linked PAMPS-K skeleton and interpenetrating MC chains endow the hydrogel with good mechanical strength, toughness, an extremely rapid self-recovery capability, and an outstanding antifatigue property. Gratifyingly, the entrapment of a concentrated alkaline solution in the hydrogel matrix yields an extremely high ionic conductivity (105 mS cm^-1 at 25 °C) and an excellent antifreezing capacity. The hydrogel retains comparable conductivity and eligible strength to withstand various mechanical deformations at -20 °C. The all-solid-state zinc-air batteries using PAMPS-K/MC hydrogels as flexible alkaline electrolytes exhibit comparable values of specific capacity (764.7 mAh g^-1), energy capacity (850.2 mWh g^-1), cycling stability, and mechanical flexibility. The batteries still possess competitive electrochemical performances even when the operating temperature drops to -20 °C.

Evaluation and Analysis of Battery Technologies Applied to Grid-Level Energy Storage Systems Based on Rough Set Theory

Interest in the development of grid-level energy storage systems has increased over the years. As one of the most popular energy storage technologies currently available, batteries offer a number of high-value opportunities due to their rapid responses, flexible installation, and excellent performances. However, because of the complexity, multifunctionality, and wide deployment of power grids, trade-offs in battery performance exist, especially when considering economics, environmental effects, and safety. Therefore, establishing a comprehensive assessment of battery technologies is an urgent undertaking. In this work, we present an analysis of rough sets to evaluate the integration of battery systems (e.g., lead–acid batteries, lithium-ion batteries, nickel/metal–hydrogen batteries, zinc–air batteries, and Na–S batteries) into a power grid. Specifically, technological properties, economic significance, environmental effects, and safety of these battery systems are evaluated on the basis of rough set theory. In addition, some perspectives are provided to promote the development of battery technologies for grid-level energy storage.

Battery Technologies for Grid-Level Large-Scale Electrical Energy Storage

Grid-level large-scale electrical energy storage (GLEES) is an essential approach for balancing the supply–demand of electricity generation, distribution, and usage. Compared with conventional energy storage methods, battery technologies are desirable energy storage devices for GLEES due to their easy modularization, rapid response, flexible installation, and short construction cycles. In general, battery energy storage technologies are expected to meet the requirements of GLEES such as peak shaving and load leveling, voltage and frequency regulation, and emergency response, which are highlighted in this perspective. Furthermore, several types of battery technologies, including lead–acid, nickel–cadmium, nickel–metal hydride, sodium–sulfur, lithium-ion, and flow batteries, are discussed in detail for the application of GLEES. Moreover, some possible developing directions to facilitate efforts in this area are presented to establish a perspective on battery technology, provide a road map for guiding future studies, and promote the commercial application of batteries for GLEES.

Toward Flexible and Wearable Zn-Air Batteries from Cotton Textile Waste

Considering the environmental problems caused by a large amount of cotton textile waste and its possible applications in flexible electrodes, it is very promising to reuse the cotton textile waste as an electrode material, reducing the cost of flexible electrodes and alleviating environmental problems. In this work, we present a rechargeable flexible Zn-air battery based on cotton textile waste, which employs Ni-metallized cotton textile waste (NMCTW) as a flexible substrate for Zn anodes and air cathodes. The transparent NiFe hydroxide thin film horizontally grown on the surface of the NMCTW substrate was synthesized in situ by the electrodeposition method, which exhibits excellent catalytic activity because of the high surface area of the two-dimensional (2D) thin film, large contact area between the thin film and substrate, and fast charge transport of the 2D thin-film structure. In view of the high catalytic performance of the NiFe hydroxide thin film, it was used as the catalytic material of the air cathode for the flexible Zn-air battery. The assembled Zn-air battery based on cotton textile waste demonstrated a good rate performance and outstanding charge and discharge cycling stability. The assembled Zn-air battery was applied to power the light-emitting diode, which exhibits exceptional flexibility and stable output power even under severe mechanical bending deformation, proving the feasibility for its application in flexible electronics.