Enhanced Cyclability and High-Rate Capability of LiNi0.88Co0.095Mn0.025O2 Cathodes by Homogeneous Al3+ Doping

Mitigating the Kinetic Hysteresis of Co-Free Ni-Rich Cathodes via Gradient Penetration of Nonmagnetic Silicon

Co-free Ni-rich layered oxides are considered a promising cathode material for next-generation Li-ion batteries due to their cost-effectiveness and high capacity. However, they still suffer from the practical challenges of low discharge capacity and poor rate capability due to the hysteresis of Li-ion diffusion kinetics. Herein, based on the regulation of the lattice magnetic frustration, the Li/Ni intermixing defects as the primary origin of kinetic hysteresis are radically addressed via the doping of the nonmagnetic Si element. Meanwhile, by adopting gradient penetration doping, a robust Si-O surface structure with reversible lattice oxygen evolution and low lattice strain is constructed on Co-free Ni-rich cathodes to suppress the formation of surface dense barrier layer. With the remarkably enhanced Li-ion diffusion kinetics in atomic and electrode particle scales, the as-obtained cathodes (LiNixMn1-xSi0.01O2, 0.6≤x≤0.9) achieve superior performance in discharge capacity, rate capability, and durability. This work highlights the coupling effect of magnetic structure and interfacial chemicals on Li-ion transport properties, and the concept will inspire more researchers to conduct an intensive study.

Doping Effects on Ternary Cathode Materials for Lithium-Ion Batteries: A Review

The ongoing advancements in lithium-ion battery technology are pivotal in propelling the performance of modern electronic devices and electric vehicles. Amongst various components, the cathode material significantly influences the battery performance, such as the specific capacity, capacity retention and the rate performance. Ternary cathode materials, composed of nickel, manganese, and cobalt (NCM), offer a balanced combination of these traits. Recent developments focus on elemental doping, which involves substituting a fraction of NCM constituent ions with alternative cations such as aluminum, titanium, or magnesium. This strategic substitution aims to enhance structural stability, increase capacity retention, and improve resistance to thermal runaway. Doped ternary materials have shown promising results, with improvements in cycle life and operational safety. However, the quest for optimal doping elements and concentrations persists to maximize performance while minimizing cost and environmental impact, ensuring the progression towards high-energy-density, durable, and safe battery technologies.

Enhancing the Cycling and Rate Performance of Ni-Rich Cathodes for Lithium-Ion Batteries by Bulk-Phase Engineering and Surface Reconstruction

The structural and interfacial instability of Ni-rich layered cathodes LiNi0.9Co0.05Mn0.05O2 (NCM9055) severely hinders their commercial application. In this work, straightforward high-temperature solid-state methods are utilized to successfully synthesize Nb-doped and Li3PO4-coated LiNi0.9Co0.05Mn0.05O2 by combining two niobium sources, NbOPO4·3H2O and Nb2O5, for the first time. Studies indicate that Nb doping enhanced the integrity of the layered structure, and the Li3PO4 coating reduced water absorption on the surface and considerably boosted the durability of the interface. The dual-modified cathode Li(Ni0.9Co0.05Mn0.05)0.985Nb0.015O2@Li3PO4 (NCM-2) exhibits remarkable cycling and rate performance. The initial discharge specific capacity of NCM-2 is 203.33 mAh g-1 at 0.1 C and 196.04 mAh g-1 at 1 C, while the capacity retention after 200 cycles is 91.38% at 1 C, which is much higher than that of pristine NCM9055 (49.96%). In addition, it also provides a superior discharge specific capacity of about 175.63 mAh g-1 even at 5 C. This study emphasizes a feasible approach to enhancing the stability of Ni-rich cathodes at the interfaces and bulk structures.

Directional and Orderly Arranged Ni0.9Mn0.1(OH)2 Enables the Synthesis of Single-Crystal Ni-Rich Co-Free LiNi0.9Mn0.1O2 with Enhanced Internal Structural Stability

In this paper, the effect of the structure characteristics of the precursor on the electrochemical properties of a single-crystal cobalt-free high-nickel LiNi0.9Mn0.1O2 cathode is systematically studied. Precursors with different morphologies are synthesized by adjusting the coprecipitation reaction conditions. The results of SEM and XRD show that with the increase in the orderly stacking arrangement of internal primary nanosheets of Ni0.9Mn0.1(OH)2, the exposed active {010} planes at the surface increase. The prepared cathode materials finally inherit the structural features of the precursor, and the single-crystal Co-free Ni-rich LiNi0.9Mn0.1O2 cathode with highly exposed active {010} planes shows a well-ordered crystal structure and low Li+/Ni2+ cation mixing. The characterization results reveal that the high percentage of {010} planes will improve the Li+ transportation kinetics, decrease electrochemical impedance, and significantly alleviate the accumulation of rock-salt phases. Therefore, the material with this structure shows good electrochemical performance.

Improving the cycling stability of LiNi0.8Co0.1Mn0.1O2 by boron doping to inhibit Li/Ni mixing

Boron doping significantly reduces the Li/Ni cation mixing of LiNi0.8Co0.1Mn0.1O2, decreases the charge transfer resistance, and improves the reversibility of the H2-H3 phase transition at 4.2 V. Among similar materials, the cathode material with 1.0 mol% boron doping shows excellent cycling performance, with capacity retention of 96% after 200 cycles at 50 °C.

Influence of Al doping on the structure and electrochemical performance of the Co-free LiNi0.8Mn0.2O2 cathode material

The transformation from LiNi1-x-yCoxMnyO2 (NCM) cathodes to Co-free LiNi1-xMnxO2 (NM) cathodes is considered as an effective solution for the electric vehicle (EV) industry to deal with the high cost of cobalt. However, severe Li/Ni disorder, structural instability and poor cycling stability are the main obstacles to their practical application. Al doping has proven to be an effective method to improve the electrochemical performance of Ni-rich NCMs. However, with regard to Ni-rich Co-free NM cathodes, the influence of Al doping on the structural stability and electrochemical performance of NM cathodes is still not clear. In this work, Al doped LiNi0.8Mn0.2-xAlxO2 cathodes are designed and their structural stability and electrochemical performance are investigated by a combination of XRD, SEM, TEM, CV, GITT, cycling testing and EIS techniques. As a result, Al doping can effectively inhibit Li/Ni disorder and improve the structural and thermal stability. In detail, 5% is the optimal doping amount for LiNi0.8Mn0.2O2 cathodes to obtain the best electrochemical performance and the LiNi0.8Mn0.15Al0.05O2 cathode shows an excellent capacity retention of 91.97% after 300 cycles at 3.0-4.3 V. This work provides an effective strategy for the development of Ni-rich Co-free NM cathodes.

Outstanding Electrochemical Performance of Ni-Rich Concentration-Gradient Cathode Material LiNi0.9Co0.083Mn0.017O2 for Lithium-Ion Batteries

The full-concentrationgradient LiNi_0.9Co_0.083Mn_0.017O₂ (CG-LNCM), consisting of core Ni-rich LiNi_0.93Co_0.07O₂, transition zone LiNi_1-x-yCo_xMn_yO_2, and outmost shell LiNi_1/3Co_1/3Mn_1/3O₂ was prepared by a facile co-precipitation method and high-temperature calcination. CG-LNCM was then investigated with an X-ray diffractometer, ascanning electron microscope, a transmission electron microscope, and electrochemical measurements. The results demonstrate that CG-LNCM has a lower cation mixing of Li⁺ and Ni²⁺ and larger Li⁺ diffusion coefficients than concentration-constant LiNi_0.9Co_0.083Mn_0.017O₂ (CC-LNCM). CG-LNCM presents a higher capacity and a better rate of capability and cyclability than CC-LNCM. CG-LNCM and CC-LNCM show initial discharge capacities of 221.2 and 212.5 mAh g^-1 at 0.2C (40 mA g^-1) with corresponding residual discharge capacities of 177.3 and 156.1 mAh g^-1 after 80 cycles, respectively. Even at high current rates of 2C and 5C, CG-LNCM exhibits high discharge capacities of 165.1 and 149.1 mAh g^-1 after 100 cycles, respectively, while the residual discharge capacities of CC-LNCM are as low as 148.8 and 117.9 mAh g^-1 at 2C and 5C after 100 cycles, respectively. The significantly improved electrochemical performance of CG-LNCM is attributed to its concentration-gradient microstructure and the composition distribution of concentration-gradient LiNi_0.9Co_0.083Mn_0.017O₂. The special concentration-gradient design and the facile synthesis are favorable for massive manufacturing of high-performance Ni-rich ternary cathode materials for lithium-ion batteries.

Single-Crystal Nickel-Based Cathodes: Fundamentals and Recent Advances

Lithium-ion batteries (LIBs) represent the most promising choice for meeting the ever-growing demand of society for various electric applications, such as electric transportation, portable electronics, and grid storage. Nickel-rich layered oxides have largely replaced LiCoO2 in commercial batteries because of their low cost, high energy density, and good reliability. Traditional nickel-based oxide particles, usually called polycrystal materials, are composed of microsized primary particles. However, polycrystal particles tend to suffer from pulverization and severe side reactions along grain boundaries during cycling. These phenomena accelerate cell degradation. Single-crystal materials, which exhibit robust mechanical strength and a high surface area, have great potential to address the challenges that hinder their polycrystal counterparts. A comprehensive understanding of the growing body of research related to single-crystal materials is imperative to improve the performance of cathodes in LIBs. This review highlights origins, recent developments, challenges, and opportunities for single-crystal layered oxide cathodes. The synthesis science behind single-crystal materials and comparative studies between single-crystal and polycrystal materials are discussed in detail. Industrial techniques and facilities are also reviewed in combination with our group’s experiences in single-crystal research. Future development should focus on facile production with strong control of the particle size and distribution, structural defects, and impurities to fully reap the benefits of single-crystal materials.

Graphical abstract

Design of need-based phosphors and scintillators by compositional modulation in the ZnGa2-xAlxO4:Cr3+ spinel: pure compound versus solid solutions

Materials that can depict persistent deep red light under both ultraviolet (UV) and X-ray illumination can be a boon to sustainable economy, particularly for optical imaging, solid state lighting, and anticounterfeiting applications. Herein, we have made a series of compounds starting from ZnGa₂O₄:Cr³⁺ to ZnAl₂O₄:Cr³⁺ (individual spinel) by substituting the varied concentration of Al³⁺ in place of Ga³⁺ in ZnGa_2-xAl_xO₄:Cr³⁺ (solid solution). By virtue of the structural and defect engineering doping strategy, the photo and radioluminescence are expected to be improved. Both Cr and Al doping was found to be energetically favorable in ZnGa₂O₄, where the same does not hold true for Ga doping in ZnAl₂O₄, as indicated by the DFT-calculated defect formation energies. There seems to be ordering around the dopant ion in the solid solutions compared to either ZnGa₂O₄ or ZnAl₂O₄ and is also reflected to as lower persistent luminescence (PerL) lifetimes. PerL under UV, in general. was found to be lower with the enhancement in the Al³⁺ content endowed by the formation of Cr-Cr ion pair, lower probability of antisite formation, and widening band gap. On the other hand, X-ray excited emission enhances in the solid solution due to the decrease in cation inversion and associated defects. Confocal Microscopy showed that larger particles depicted much brighter deep red emission but failed to percolate to the human cells to a detectable limit; hence, future work is needed for the functionalization of the ZnGa_2-xAl_xO₄:Cr³⁺ spinel. This work could be of great implication in designing need-based materials, where UV and X-ray excitation is required, for deep red emission with persistent characteristics from chromium-doped spinels.

Understanding the enhancement effect of boron doping on the electrochemical performance of single-crystalline Ni-rich cathode materials

Ni-rich layered oxides are considered as promising cathode materials for Li-ion batteries (LIBs) due to their satisfying theoretical specific capacity and reasonable cost. However, poor cycling stability caused by structural collapse and interfacial instability of the Ni-rich cathode material limits the further applications of commercialization. Herein, a series of B-doped single-crystal LiNi_0.83Co_0.05Mn_0.12O₂ (NCM) are designed and fabricated, aiming to improve the structural stability and enlarge the Li⁺-ions diffusion paths simultaneously. It reveals that B-doping at TM layers will facilitate the formation of stronger B-O covalent bonds and expand the layered distance, significantly enhancing the thermodynamics and kinetic of NCM electrode. With the synergistic effect of single-crystalline architecture and appropriate B-doping, it can effectively alleviate the occurrence of internal strain with structural degradation and boost the intrinsic rate capability synchronously. As anticipated, the 0.6 mol % B-doped NCM electrode exhibits enhanced rate property and superior cycle stability, even at the harsh condition of high-temperature and elevated cut-off voltage. Remarkably, when tested in pouch-type full-cell, it maintains high reversible capacity with superior capacity retention of 91.35% over 500 cycles with only 0.0173% decay per cycle. This research illustrates the feasibility of B-doping and single-crystalline architecture to improve the electrochemical performance, which is beneficial to understand the enhancement effect and provides the design strategy for the commercialization progress of Ni-rich cathode materials.

Realization of a High-Voltage and High-Rate Nickel-Rich NCM Cathode Material for LIBs by Co and Ti Dual Modification

Nickel-rich Li(Ni_xCo_yMn_1-x-yO₂) (x ≥ 0.6) is considered to be a predominant cathode for next-generation lithium-ion batteries (LIBs) due to its towering specific energy density. Unfortunately, serious structural degradation causes rapid capacity degradation with the increase in nickel content. Herein, a Co and Ti co-modified LiNi_0.8Co_0.1Mn_0.1O₂ (NCM-811) cathode ameliorates the reversible capacity together with the rate capability by obviously alleviating the lattice structure degradation and microscopic intergranular cracks. Further studies show that the titanium doping effectively reduces the cation mixing and also stabilizes the crystal structure, while the spinel phase formed at the surface by a cobalt oxide coating is much stable than the layered phase at high voltage, which can alleviate the generation of micro-cracks. After 0.5% Co oxide coating and 1% Ti doping (T1Co0.5-NCM), a superior rate capability (121.75 mA h g^-1 at 20 C between 2.7 and 4.5 V) and predominant capacity retention (74.2%) are observed compared with the pristine NCM-811 (59.5%) after 400 cycles between 2.7 and 4.7 V. This work supplies an eminent design of high-voltage and high-rate layered cathode materials and has a huge application prospect in the next generation of high-energy LIBs.

Interlinking Primary Grains with Lithium Boron Oxide to Enhance the Stability of LiNi0.8Co0.15Al0.05O2

Destructive effects of surface lithium residues introduced in synthesis and degradation of the microstructure and electrode/electrolyte interface during cycling of Ni-rich cathode materials are the major problems hindering their wide application. Herein, we demonstrate an exquisite surface modification strategy that can utilize lithium residues on the surface of LiNi_0.8Co_0.15Al_0.05O₂ to form a uniform coating layer of lithium boron oxide on the surface of the material. The resulting lithium boron oxide layer can not only efficiently serve as a protective layer to alleviate the side reactions at the electrode/electrolyte interface but also tightly interlink the primary grains of the LiNi_0.8Co_0.15Al_0.05O₂ material to prevent the material from degradation of the microstructure. As a result, the optimized lithium boron oxide-coated LiNi_0.8Co_0.15Al_0.05O₂ material exhibits a high initial discharge capacity of 202.1 mAh g^-1 at 0.1 C with a great capacity retention of 93.59% after 100 cycles at 2 C. Thus, the uniform lithium boron oxide coating endows the NCA material with excellent structural stability and long-term cycling capability.

NCA, NCM811, and the Route to Ni-Richer Lithium-Ion Batteries

The aim of this article is to examine the progress achieved in the recent years on two advanced cathode materials for EV Li-ion batteries, namely Ni-rich layered oxides LiNi0.8Co0.15Al0.05O2 (NCA) and LiNi0.8Co0.1Mn0.1O2 (NCM811). Both materials have the common layered (two-dimensional) crystal network isostructural with LiCoO2. The performance of these electrode materials are examined, the mitigation of their drawbacks (i.e., antisite defects, microcracks, surface side reactions) are discussed, together with the prospect on a next generation of Li-ion batteries with Co-free Ni-rich Li-ion batteries.

Ambient Air Stable Ni-Rich Layered Oxides Enabled by Hydrophobic Self-Assembled Monolayer

Ni-rich layered oxides, such as LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811), are considered as promising cathode materials for lithium-ion batteries due to their high energy density. However, Ni-rich layered oxides are prone to react with water and carbon dioxide in ambient air forming residual lithium compounds, resulting in deterioration of electrochemical performance and bringing a challenge to the cathode electrode preparation. In this work, we have, for the first time, demonstrated that the chemical stability of the NCM811 material in ambient air can be significantly enhanced by passivating the surface with a hydrophobic self-assembled monolayer (SAM) of octadecyl phosphate (OPA). As a result, the degradation reaction between the NCM811 material and ambient air and thus the electrochemical performance deterioration were significantly suppressed during ambient air exposure. Specifically, the 5C-rate capacity retention deterioration of the NCM811 sample during 14-day ambient air exposure has been decreased from 12 to 2% by OPA passivation. Furthermore, the 200-cycle capacity retention deterioration of the NCM811 sample after 7-day ambient air exposure has been improved from 23 to 0.7% by OPA passivation. These results are very important for the practical application of Ni-rich oxide since no need for controlling of humidity is required on the cathode manufacture; thus, the cost can be reduced. The concept of molecular self-assembly on the NCM811 material also open vast possibilities to design reagents for surface passivation of Ni-rich layered oxides.