Graphene/Si-Promoted Osteogenic Differentiation of BMSCs through Light Illumination

Near-Infrared Carbon Dots With Antibacterial and Osteogenic Activities for Sonodynamic Therapy of Infected Bone Defects

Repairing infected bone defects is hindered by the presence of stubborn bacterial infections and inadequate osteogenic activity. The incorporation of harmful antibiotics not only fosters the emergence of multidrug-resistant bacteria, but also diminishes the osteogenic properties of scaffold materials. In addition, it is essential to continuously monitor the degradation kinetics of scaffold materials at bone defect sites, yet the majority of bone repair materials lack imaging capability. To address these issues, this study reports for the first time the development of a single nanomaterial with triple functionality: efficient sonodynamic antibacterial activity, accelerated bone defect repair capability, and NIR imaging ability for visualized therapy of infected bone defects. Through rationally regulating the surface functional groups, the obtained multifunctional NIR carbon dots (NIR-CD) exhibit p-n junction-enhanced sonodynamic activity, narrow bandgap-facilitated NIR imaging capability, and negative charge-augmented osteogenic activity. The validation of NIR-CDs antibacterial and osteogenic activities in vivo is conducted by constructing 3D injectable hydrogels encapsulated by NIR-CDs (NIR-CD/GelMA). The implantation of multifunctional NIR-CD/GelMA hydrogel scaffolds in a model of MRSA-infected craniotomy defects results in almost complete restoration of the infected bone defects after 60 days. These findings will provide traceable, renewable, repairable and antibacterial candidate biomaterials for bone tissue engineering.

Unleashing the Potential of Electroactive Hybrid Biomaterials and Self-Powered Systems for Bone Therapeutics

The incidence of large bone defects caused by traumatic injury is increasing worldwide, and the tissue regeneration process requires a long recovery time due to limited self-healing capability. Endogenous bioelectrical phenomena have been well recognized as critical biophysical factors in bone remodeling and regeneration. Inspired by bioelectricity, electrical stimulation has been widely considered an external intervention to induce the osteogenic lineage of cells and enhance the synthesis of the extracellular matrix, thereby accelerating bone regeneration. With ongoing advances in biomaterials and energy-harvesting techniques, electroactive biomaterials and self-powered systems have been considered biomimetic approaches to ensure functional recovery by recapitulating the natural electrophysiological microenvironment of healthy bone tissue. In this review, we first introduce the role of bioelectricity and the endogenous electric field in bone tissue and summarize different techniques to electrically stimulate cells and tissue. Next, we highlight the latest progress in exploring electroactive hybrid biomaterials as well as self-powered systems such as triboelectric and piezoelectric-based nanogenerators and photovoltaic cell-based devices and their implementation in bone tissue engineering. Finally, we emphasize the significance of simulating the target tissue's electrophysiological microenvironment and propose the opportunities and challenges faced by electroactive hybrid biomaterials and self-powered bioelectronics for bone repair strategies.

Accelerated Bone Regeneration on the Metal Surface through Controllable Surface Potential

Surface potential is rarely investigated as an independent factor in influencing tissue regeneration on the metal surface. In this work, the surface potential on the titanium (Ti) surface was designed to be tailored and adjusted independently, which arises from the ferroelectricity and piezoelectricity of poled poly(vinylidene fluoride-trifluoroethylene) (PVTF). Notably, it is found that such controllable surface potential on the metal surface significantly promotes osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in vitro as well as bone regeneration in vivo. In addition, the intracellular calcium ion (Ca2+) concentration measurement further proves that such controllable surface potential on the metal surface could activate the transmembrane calcium channels and allow the influx of extracellular Ca2+ into the cytoplasm. That might be the reason for improved osteogenic differentiation of BMSCs and bone regeneration. These findings reveal the potential of the metal surface with improved bioactivity for stimulation of osteogenesis and show great prospects for fabricable implantable medical devices with adjustable surface potential.

Dynamic photoelectrical regulation of ECM protein and cellular behaviors

Dynamic regulation of cell-extracellular matrix (ECM)-material interactions is crucial for various biomedical applications. In this study, a light-activated molecular switch for the modulation of cell attachment/detachment behaviors was established on monolayer graphene (Gr)/n-type Silicon substrates (Gr/Si). Initiated by light illumination at the Gr/Si interface, pre-adsorbed proteins (bovine serum albumin, ECM proteins collagen-1, and fibronectin) underwent protonation to achieve negative charge transfer to Gr films (n-doping) through π-π interactions. This n-doping process stimulated the conformational switches of ECM proteins. The structural alterations in these ECM interactors significantly reduced the specificity of the cell surface receptor-ligand interaction (e.g., integrin recognition), leading to dynamic regulation of cell adhesion and eventual cell detachment. RNA-sequencing results revealed that the detached bone marrow mesenchymal stromal cell sheets from the Gr/Si system manifested regulated immunoregulatory properties and enhanced osteogenic differentiation, implying their potential application in bone tissue regeneration. This work not only provides a fast and feasible method for controllable cells/cell sheets harvesting but also gives new insights into the understanding of cell-ECM-material communications.

•

A light-activated molecular switch for regulation of cell attachment/detachment behaviors was established on (Gr/Si) substrates.

•

Light-induced charge transfer from ECM protein to Gr/Si through π-π interactions, resulting in the conformational alteration of ECM proteins.

•

Structural changes in ECM weakened the binding between RGD and integrin, inducing cell detachment.

•

This work provides a feasible method for cell harvesting and improves the understanding of cell-ECM-material communications.

Electroactive Biomaterials for Facilitating Bone Defect Repair under Pathological Conditions

Bone degeneration associated with various diseases is increasing due to rapid aging, sedentary lifestyles, and unhealthy diets. Living bone tissue has bioelectric properties critical to bone remodeling, and bone degeneration under various pathological conditions results in significant changes to these bioelectric properties. There is growing interest in utilizing biomimetic electroactive biomaterials that recapitulate the natural electrophysiological microenvironment of healthy bone tissue to promote bone repair. This review first summarizes the etiology of degenerative bone conditions associated with various diseases such as type II diabetes, osteoporosis, periodontitis, osteoarthritis, rheumatoid arthritis, osteomyelitis, and metastatic osteolysis. Next, the diverse array of natural and synthetic electroactive biomaterials with therapeutic potential are discussed. Putative mechanistic pathways by which electroactive biomaterials can mitigate bone degeneration are critically examined, including the enhancement of osteogenesis and angiogenesis, suppression of inflammation and osteoclastogenesis, as well as their anti-bacterial effects. Finally, the limited research on utilization of electroactive biomaterials in the treatment of bone degeneration associated with the aforementioned diseases are examined. Previous studies have mostly focused on using electroactive biomaterials to treat bone traumatic injuries. It is hoped that this review will encourage more research efforts on the use of electroactive biomaterials for treating degenerative bone conditions.

PLLA/Graphene Nanocomposites Membranes with Improved Biocompatibility and Mechanical Properties

In this work, nanocomposite membranes based on graphene and polylactide were evaluated for mechanical properties and biocompatibility. Single-layer graphene (SLG), graphene nanosheets (GNS), and poly L-lactic acid (PLLA) were prepared through layer-by-layer deposition and homogeneous mixing. The results revealed that PLLA/SLG nanocomposites and PLLA/GNS nanocomposites could show enhanced mechanical properties and biocompatibility. The addition of a tiny amount of SLG significantly improved Young’s modulus and tensile strength of the PLLA matrix by 15.9% and 32.8% respectively, while the addition of the same mass ratio of GNS boosted the elongation at break of the PLLA matrix by 79.7%. These results were ascribed to the crystallinity and interfacial interaction differences resulting from graphene incorporation. Also, improved biocompatibility was observed with graphene incorporation. Such nanocomposites membranes showed a lot of potential as environment-friendly and biomedical materials.

The response of bioactive titanium surfaces with different structure to UVC-irradiation to eliminate the negative effect on biological properties during aging time

The biological aging of titanium implants affects the service lifetime negatively in clinical applications, and UV irradiation is an applicable method to overcome the biological aging. This study investigated the changes in surface characteristics and biological properties of bioactive titanium surfaces with different structure and topography after UVC-irradiation. The bioactive titanium surfaces were prepared by anodizing (AO), sandblasting and acid-etching (SLA), acid-alkali etching (AA), alkali-heat etching (AH) methods. Samples were stored at dark for 7 weeks to simulate biological aging process and then irradiated by UVC for 2 hours. The results showed that the Ti-OH groups, which are crucial to enhance the biological properties, were easier to be generated on AO surfaces by UVC-irradiation, o owing to a mixture of anatase and rutile on surfaces. UVC-irradiation had the strongest effect on AO surfaces to enhance the bioactivity in bone-like apatite deposition and better biocompatibility in MSCs attachment and proliferation. Therefore, titanium surfaces with a mixture phase of anatase and rutile has the potential to effectively utilize the benefits of UVC-irradiation to overcome the negative effects of the biological aging and have a promising clinical application prospect.

Carbon-Based Nanomaterials for Bone and Cartilage Regeneration: A Review

As the main load-bearing structure in the human body, bone and cartilage are susceptible to damage in sports and other activities. The repair and regeneration of bone and articular cartilage have been extensively studied in the past decades. Traditional approaches have been widely applied in clinical practice, but the effect varies from person to person and may cause side effects. With the rapid development of tissue engineering and regenerative medicine, various biomaterials show great potential in the regeneration of bone and cartilage. Carbon-based nanomaterials are solid materials with different structures and properties composed of allotropes of carbon, which are classified into zero-, one-, and two-dimensional ones. This Review systemically summarizes the different types of carbon-based nanomaterials, including zero-dimensional (fullerene, carbon dots, nanodiamonds), one-dimensional (carbon nanotubes), and two-dimensional (graphenic materials) as well as their applications in bone, cartilage, and osteochondral regeneration. Current limitations and future perspectives of carbon-based nanomaterials are also discussed.

Light-induced osteogenic differentiation of BMSCs with graphene/TiO2 composite coating on Ti implant

Light-induced surface potential have been demonstrated as an effective bone marrow mesenchymal stem cells (BMSCs) osteogenic differentiation regulator. However, traditional bone repair implants almost were weak or no light-responsive. Fortunately, surface modification was a feasible strategy to realize its light functionalization for bone implants. Herein, a graphene oxide (GO)/titanium dioxide (TiO₂) nanodots composite coating on the surface of titanium (Ti) implant was constructed, and GO was reduced to reduced graphene oxide (rGO) with the method of UV-assisted photocatalytic reduction. After rGO deposited on the surface of TiO₂, a heterojunction formed at the interface of rGO and TiO₂. With visible light illumination, positive charges accumulated on the surface of rGO/TiO₂ film, and performed as a positive surface potential change. The light-induced surface potential which was generated under proper light intensity is harmless to the cell adhesion and proliferation behavior, but presented a good BMSCs osteogenic differentiation promoting effect, and the activation of the voltage-gated calcium channels through surface potential and the promotion of the adsorption of osteogenic growth factors could be the reason. This work given a new insight of the modification for Ti implant with a light-induced surface potential, and shows potential application for bone regeneration on the clinical practice through light stimulation.

Gadolinium-Doped BTO-Functionalized Nanocomposites with Enhanced MRI and X-ray Dual Imaging to Simulate the Electrical Properties of Bone

Physicochemical properties of biomaterials play a regulatory role in osteoblast proliferation and differentiation. Inspired by the electrical properties of natural bone, the electroactive composites applied to osteogenesis have gradually become the hotspot of research. In this work, an electroactive biocomposite of poly(lactic-co-glycolic acid) mixed with gadolinium-doped barium titanate nanoparticles (Gd-BTO NPs) was investigated to establish the structure-activity relationship between electrical property, especially surface potential, and osteogenic activity. Furthermore, the potential mechanism was also explored. The results showed that the introduction of Gd-BTO NPs was more conducive to improve the elastic modulus and beneficial to utilize MRI and X-ray dual imaging. The electrical characteristics of composites indicate that the introduction of Gd-BTO NPs can effectively improve the electrical properties of materials including dielectricity, piezoelectricity, and surface potential. Moreover, adjusting the amount of gadolinium doping could optimize electrical activity and enhance MRI compatibility. The surface potential of 0.2Gd-BTO/PLGA could reach -58.2 to -60.9 mV at pH values from 7 to 9. Functional studies on cells revealed that the negative surface potential of poled Gd-BTO/PLGA enhanced cell attachment and osteogenic differentiation significantly. Furthermore, the negative surface potential could induce intracellular Ca²⁺ ion concentration oscillation and improve osteogenic differentiation via the calcineurin/NFAT signal pathway. These findings suggest that electroactive Gd-BTO/PLGA nanocomposites may have huge potential for bone regeneration and be expected to have wide applications in the field of bone tissue engineering.