Porous Zr-Based Metal-Organic Frameworks (Zr-MOFs)-Incorporated Thin-Film Nanocomposite Membrane toward Enhanced Desalination Performance

A molecularly engineered MOF photocatalyst for CO production from visible light-driven CO2 reduction

The search for new robust and efficient heterogeneous photocatalysts for the reduction of CO2 has emerged as a key focus in the realm of CO2 reduction research. However, there is a significant challenge in fabricating a photocatalyst with remarkable photoreduction activity. In this context, accommodation of a photocatalytic redox-active molecular metal complex into a stable MOF framework by replacing the existing linker through post-synthetic exchange (PSE), also termed solvent-assisted ligand exchange (SALE), is a powerful tool for developing photocatalysts for CO2 reduction. Herein, we demonstrate for the first time the successful incorporation of a Ru(II) bis-terpyridine complex, [Ru(cptpy)2], into a stable ZrIV-based metal-organic framework (MOF) consisting of a naphthalene diimide (NDI) linker via SALE. The obtained MOF, Zr-NDI@Ru-tpy or Zr-NDI@Ru-tpy-m was used for photocatalytic CO2 reduction under visible light. The Zr-NDI@Ru-tpy shows an impressive CO production rate of 2449 μmol g-1 h-1 with a low hydrogen production rate of 101 μmol g-1 h-1, demonstrating a high selectivity of 97% for CO production. The turnover number (TON) for CO evolution by Zr-NDI@Ru-tpy is 123 in a photocatalytic run of 6 h. Furthermore, a plausible mechanism for CO2 conversion into CO has been proposed using photophysical and electrochemical investigation, along with in situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. This study shows that the insertion of a redox-active molecular catalyst into a MOF is a promising method to produce efficient and stable photocatalysts that are also recyclable.

Controllable Design of Polyamide Composite Membrane Separation Layer Structures via Metal-Organic Frameworks: A Review

Optimizing the structure of the polyamide (PA) layer to improve the separation performance of PA thin-film composite (TFC) membranes has always been a hot topic in the field of membrane preparation. As novel crystalline materials with high porosity, multi-functional groups, and good compatibility with membrane substrate, metal-organic frameworks (MOFs) have been introduced in the past decade for the modification of the PA structure in order to break through the separation trade-off between permeability and selectivity. This review begins by summarizing the recent progress in the control of MOF-based thin-film nanocomposite (TFN) membrane structures. The review also covers different strategies used for preparing TFN membranes. Additionally, it discusses the mechanisms behind how these strategies regulate the structure and properties of PA. Finally, the design of a competent MOF material that is suitable to reach the requirements for the fabrication of TFN membranes is also discussed. The aim of this paper is to provide key insights into the precise control of TFN-PA structures based on MOFs.

Tailoring Polyamide Nanofiltration Membranes by Switching Charge of Nanocellulose Interlayers

The interlayer strategy has emerged as an effective approach for modulating the interfacial polymerization process and improving the permeability and selectivity of polyamide membranes. However, the underlying mechanisms by which charged interlayers influence the interfacial polymerization process remain inadequately understood. In this study, we utilized two distinct charged cellulose nanofibers, namely, carboxylated cellulose (⊖-CNF) and quaternized cellulose ([Formula: see text]-CNF), as interlayers to regulate the interfacial polymerization process. Through simulation results, isothermal titration calorimetry (ITC) and UV tests, we demonstrated that the [Formula: see text]-CNF interlayer, which possesses stronger hydration capability and better piperazine affinity, enhanced the diffusion of piperazine across the reaction interface compared with the ⊖-CNF interlayer. This led to an acceleration of the interfacial polymerization process and the formation of a denser membrane structure. Further investigation revealed that the charged interlayers significantly influenced the surface charging properties of the resulting nanofiltration membranes within a 30 nm range of electrostatic effects. Specifically, the ⊖-CNF interlayer conferred a higher negative charge to the membrane surface, while the [Formula: see text]-CNF interlayer endowed the membranes with a lower surface negative charge. Leveraging these differences, the ⊖-i-TFC membranes exhibited exceptional separation performance for divalent anions, achieving a SO42-/Cl- selectivity of 136. Conversely, the [Formula: see text]-i-TFC membrane demonstrated an enhanced separation of divalent cations, displaying a Mg2+/Na+ selectivity of 3.5. This study lays the groundwork for regulating the surface charging properties of polyamide membranes, offering potential advancements in nanofiltration applications.

Immobilized Urease Vector System Based on the Dynamic Defect Regeneration Strategy for Efficient Urea Removal

The clearance of urea poses a formidable challenge, and its excessive accumulation can cause various renal diseases. Urease demonstrates remarkable efficacy in eliminating urea, but cannot be reused. This study aimed to develop a composite vector system comprising microcrystalline cellulose (MCC) immobilized with urease and metal-organic framework (MOF) UiO-66-NH2, denoted as MCC@UiO/U, through the dynamic defect generation strategy. By utilizing competitive coordination, effective immobilization of urease into MCC@UiO was achieved for efficient urea removal. Within 2 h, the urea removal efficiency could reach up to 1500 mg/g, surpassing an 80% clearance rate. Furthermore, an 80% clearance rate can also be attained in peritoneal dialyzate from patients. MCC@UiO/U also exhibits an exceptional bioactivity even after undergoing 5 cycles of perfusion, demonstrating remarkable stability and biocompatibility. This innovative approach and methodology provide a novel avenue and a wide range of immobilized enzyme vectors for clinical urea removal and treatment of kidney diseases, presenting immense potential for future clinical applications.

Resilient forward osmosis membranes against microplastics fouling enhanced by MWCNTs/UiO-66-NH2 hybrid nanoparticles

The escalating presence of microplastics (MPs) in wastewater necessitates the investigation of effective tertiary treatment process. Forward osmosis (FO) emerges as an effective non-pressurized membrane process, however, for the effective implementation of FO systems, the development of fouling-resistance FO membranes with high-performance is essential. This study focuses on the integration of MWCNT/UiO-66-NH2 as metal-organic frameworks (MOFs) and multi-wall carbon nanotubes (MWCNT) nanocomposites in thin film composite (TFC) FO membranes, harnessing the synergistic power of hybrid nanoparticles in FO membranes. The results showed that the addition of MWCNT/UiO-66-NH2 in the aqueous phase during polyamide formation changed the polyamide surface structure, and enhanced membranes' hydrophilicity by 44%. The water flux of the modified FO membrane incorporated with 0.1 wt% MWCNTs/UiO-66-NH2 increased by 67% and the reverse salt flux decreased by 22% as in comparison with the control membrane. Moreover, the modified membrane showed improved antifouling behavior against both organic foulant and MPs. The MWCNT/UiO-66-NH2 membrane experienced 35% flux decline while the control membrane experienced 65% flux decline. This proves that the integration of MWCNT/UiO-66-NH2 nanoparticles into TFC FO membranes is a viable approach in creating advanced FO membranes with high antifouling propensity with potential to be expanded further to other membrane applications.

The Preparation and Performance Study of Polyamide Film Based on PDA@MWCNTs/PVDF Porous Support Layer

It is urgent to develop a polyamide (PA) thin-film composite (TFC) membrane with a new method in this study by designing and constructing a new nanomaterial support layer instead of the conventional support layer. Polydopamine-wrapped single-walled carbon nanotubes (PDA@MWCNTs) as the place of the polymerization reaction can optimize the PA film structure and performance. The resulting composite membrane presents a higher water flux of 15.8 L·m-2·h-1·bar-1 and a rejection rate of 97% to Na2SO4, simultaneously maintaining this high separation performance in 300 min. It is a new ideal to construct novel support layer by using inorganic nanoparticles and organic polymer nanofiber membranes.

The MIL100(Fe)/BaTi0.85Zr0.15O3 nanocomposite with the photocatalytic capability for study of tetracycline photodegradation kinetics

The visible light-active nanocomposite with the photocatalytic capability was facile one-pot solvothermal method successfully synthesized. X-ray diffraction (XRD), Thermogravimetry and Derivative Thermogravimetry (TG-DTG), Scanning Electron Microscopy with Energy Dispersive X-ray Analysis (SEM-EDX), Diffuse Reflectance Spectroscopy (UV-Vis DRS), and Fourier Transform Infra-Red (FT-IR) analysis were employed to characterize the synthetized BaTi_0.85Zr_0.15O3, MIL-100(Fe), and the MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ samples. As a result of the Scherrer equations, the size of grains for MIL-100(Fe), BaTi_0.85Zr_0.15O₃, and MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ was estimated to be 40.81, 12.00, and 22.70 nm, respectively. MIL-100(Fe), BaTi_0.85Zr_0.15O₃, and MIL-100(Fe)/BaTi_0.85Zr_0.15O₃ samples showed bandgap values of 1.77, 3.02, and 2.56 determined from their absorption edge wavelengths. In the photodegraded solutions, chemical oxygen demand (COD) data and tetracycline (TC) absorbencies were used to obtain the rate constants of 0.032 min^-1 and 0.030 min^-1, respectively. This corresponds to t_1/2-values of 27.7 min and 21.7 min, respectively, for the degradation and mineralization of TC molecules during photodegradation process.

An Overview of the Modification Strategies in Developing Antifouling Nanofiltration Membranes

Freshwater deficiency has become a significant issue affecting many nations' social and economic development because of the fast-growing demand for water resources. Nanofiltration (NF) is one of the promising technologies for water reclamation application, particularly in desalination, water, and wastewater treatment fields. Nevertheless, membrane fouling remains a significant concern since it can reduce the NF membrane performance and increase operating expenses. Consequently, numerous studies have focused on improving the NF membrane's resistance to fouling. This review highlights the recent progress in NF modification strategies using three types of antifouling modifiers, i.e., nanoparticles, polymers, and composite polymer/nanoparticles. The correlation between antifouling performance and membrane properties such as hydrophilicity, surface chemistry, surface charge, and morphology are discussed. The challenges and perspectives regarding antifouling modifiers and modification strategies conclude this review.

Loosely Sandwich-Structured Membranes Decorated with UiO-66-NH2 for Efficient Antibiotic Separation and Organic Solvent Resistance

Thin-film nanocomposite (TFN) membranes with efficient molecular separation and organic solvent resistance are active in demand in wastewater treatment and resource reclamation, meeting the goal of emission peaks and carbon neutrality. In this work, a simple and rational design strategy has been employed to construct a sandwich-structured membrane for removing fluoroquinolone antibiotics and recycling organic solvents. The sandwich-structured membrane is composed of a porous substrate, a hydrophilic tannic acid-polyethyleneimine (TA-PEI) interlayer, and a polyamide (PA) selective layer decorated with metal-organic framework (PA-MOF). Results manifest that the hydrophilic TA-PEI interlayer played a bridging and gutter effect to achieve effective control in amide storage, amine diffusion, and nanomaterial downward leakage at the immiscible interface. The PA-MOF selective layer has been changed to a loosely crumpled surface, endowing functionalities on the sandwich-structured membrane that included limited pores, strengthened electronegativity, and stronger hydrophilicity. Thus, an enhanced water flux of 87.23 ± 7.43 LMH was achieved by the TFN-2 membrane (0.04 mg·mL^-1 UiO-66-NH₂), which is more than five times that of the thin-film composite membrane (17.46 ± 3.88 LMH). The rejection against norfloxacin, ciprofloxacin, and levofloxacin is 92.94 ± 1.60%, 94.62 ± 1.29%, and 96.92 ± 1.05%, respectively, effectively breaking through the "trade-off" effect between membrane permeability and rejection efficiency. Further antifouling results showed that the sandwich-structured membrane had lower flux decay ratios (3.36∼7.07%) and higher flux recovery ratios (93.40∼98.40%), as well as superior long-term stability after 30 days of filtration. Moreover, organic solvent resistance testing confirms that the sandwich-structured membrane maintained stable solvent flux and better recovery rates in ethanol, acetone, isopropanol, and N,N-dimethylformamide. Detailed nanofiltration mechanism studies revealed that these outstanding performances are based on the joint effect of the TA-PEI interlayer and PA-MOF selective layer, proposing a new perspective to break through the bottleneck of nanofiltration application in a complex environment.

Emerging advances and current applications of nanoMOF-based membranes for water treatment

Metal-organic frameworks (MOFs) are significantly tunable materials that can be exploited in a wide range of applications. In recent years, a large number of studies have been focused on synthesizing nano-scale MOFs (nanoMOFs), thus taking advantage of these unique materials in various applications, especially those that are only possible at nano-scale. One of the technologies where nanoMOF materials occupy a central role is the membrane technology as one of the most efficient separation techniques. Therefore, numerous reports can be found on the enhancement of the physicochemical properties of polymeric membranes by using nanoMOFs, leading to remarkably improved performance. One of the most considerable applications of these nanoMOF-based membranes is in water treatment systems, because freshwater scarcity is now an undeniable crisis facing humanity. In this in-depth review, the most prominent synthesis and post-synthesis methods for the fabrication of nanoMOFs are initially discussed. Afterwards, different nanoMOF-based composite membranes such as thin-film nanocomposites (TFN) and mixed-matrix membranes (MMM) and their various fabrication methods are reviewed and compared. Then, the impacts of using MOFs-based membranes for water purification through growing metal-organic frameworks crystals on the support materials and utilization of metal-organic frameworks as fillers in mixed matrix membrane (MMM) are highlighted. Finally, a summary of pros and cons of using nanoMOFs in membrane technology for water treatment purposes and clear future prospects and research potentials are presented.

"Lighting-up" methylene blue-embedded zirconium based organic framework triggered by Al3+ for advancing the sensitivity of E. coli O157:H7 analysis in dual-signal lateral flow immunochromatographic assay

The sensitive detection of foodborne pathogens is of great significance for ensuring food safety and quality. Herein, on the basis of methylene blue-embedded zirconium based organic framework (UIO@MB) as the remarkable capture carrier and signal indicator, with the Al³⁺-assisted the fluorescent signal response, we developed a label-free and dual-signal lateral flow immunochromatographic assay (LDLFIA) for sensitive detection of Escherichia coli (E. coli) O157:H7. The UIO@MB sensing carrier without monoclonal antibodies (mAbs) was manufactured, which adhered to bacteria to form the UIO@MB-E. coli O157:H7 conjugate, resulting in visible blue band. Then the fluorescent response of the OH-rich UIO@MB was excited by introducing Al³⁺, arising from capturing of Al³⁺ by -OH through coordination and electrostatic affinity, thus generating a green fluorescent band. Impressively, a smartphone-based portable reading system was developed that can reflect the test results of UIO@MB-LDLFIA immediately. Under optimum conditions, UIO@MB-LDLFIA can complete colorimetric and fluorescent mode detection within 90 min, with a detection sensitivity of 10³ CFU/mL, which were 100 times lower than traditional gold nanoparticles-based LFIA and polymerase chain reaction (PCR). Moreover, the feasibility of the method was further evaluated by the determination of E. coli O157: H7 in drinking water and cabbage with average recoveries of 85.1-123.0%.

Toxicity assessment and underlying mechanisms of multiple metal organic frameworks using the green algae Chlamydomonas reinhardtii model

Metal-organic frameworks (MOFs) are an emerging class of materials which have garnered increasing attention for their utility as adsorbents and photocatalysts in water treatment. Nevertheless, the environmental risks of MOFs, especially their underlying impacts on aquatic organisms, are not fully explored. Herein, the toxicity of multiple representative MOFs was systematically assessed using a freshwater green alga (Chlamydomonas reinhardtii) model. Six typical MOFs with different metal nodes or organic linkers, including four transition metal incorporated aluminum-based porphyrin MOFs [pristine Al-PMOF, Al-PMOF (Cu), Al-PMOF (Ni), and Al-PMOF (Co)], one amine-functionalized MOF NH₂-MIL-125 (Ti), and one bimetallic Hofmann MOF (NiCo-PYZ), were successfully synthesized and characterized. All the tested MOFs significantly reduced the chlorophyll content and inhibited the algal growth, with the most toxic materials being NiCo-PYZ and Al-PMOF (Cu). Distinct toxic mechanisms were observed for the tested MOFs. Metal ion release was the primary cause for algal toxicity induced by NiCo-PYZ. The algal toxicity induced by porphyrin MOFs could be explained by the combined effects of metal ion release and nutrient adsorption, agglomeration and physical interactions, and reactive oxygen species generation. NH₂-MIL-125 (Ti) showed higher stability and more biocompatibility than the other tested MOFs. MOFs concentrations with no harmful effects to algae can be taken as the threshold values for safe use and discharge of MOFs. The ecotoxicological risks of MOFs should be considered as the applied concentrations of MOFs at mg/mL levels in environmental remediation were much higher than the no harmful effect thresholds.

Novel Perylene-3, 4, 9, 10-tetracarboxylic dianhydride modified Zr-MOFs/Graphene oxide membrane for dye wastewater treatment

A new type of composite membrane was prepared through the vacuum filtration self-assembly, in which, graphene oxide (GO) was the basic material, and the horizontal insertion material is product of perylene-3, 4, 9, 10-tetracarboxylic dianhydride (PTCDA) and UiO-66-NH₂ (PTCDA-UiO-66-NH₂). The leading role of Π-Π conjugate, auxiliary effect of hydrogen bonding during membrane preparation have been confirmed through Fourier transform infrared spectroscopy (FTIR), UV-visible spectrophotometer, Raman spectroscopy, and X-ray diffraction (XRD). The prepared GO@PTCDA-UiO-66-NH₂ membrane had new nodular structure compared to GO membrane by scanning electron microscopy (SEM) and atomic force microscopy (AFM), which promoted the water transport. In addition, the insertion of PTCDA-UiO-66-NH₂ narrowed the actual filtration spacing between GO sheets, and PTCDA-UiO-66-NH₂ could also adsorbed dye laterally. Experiments showed that the permeance of GO@PTCDA-UiO-66-NH₂ membrane was 1.7 times of GO membrane, and the removal of methyl blue, congo red, crystal violet and disperse black 9 was close to 100%. Under extreme pH, high salt concentration and multiple recycling, its separation ability was still excellent. The GO@PTCDA-UiO-66-NH₂ membrane constituted a unique synergistic structure of vertical-screening and horizontal-adsorption, which successfully overcame the trade-off effect and obtained excellent stability of structure and performance. Therefore, GO@PTCDA-UiO-66-NH₂ membrane had great potential in practical applications.

Ionic Liquid-Based Colloidal Formulations for the Synthesis of Nano-MOFs: Applications in Gas Adsorption and Water Desalination

Microemulsions (MEs) comprising choline dioctylsulfosuccinate [Cho][AOT], a biobased ionic liquid (IL) surfactant as an emulsifier, (R)-(+)-limonene (RL) as a nonpolar phase, and ethylene glycol (EG)/ethanolammonium formate (EOAF) as an organic solvent/low-viscosity IL polar component were constructed. Spontaneous aggregation of [Cho][AOT] was observed with a negative ΔH form using isothermal titration calorimetry. The aggregates of [Cho][AOT] in RL showed a critical micellar concentration (cmc) of ∼5.49 mM, EG (cmc ∼3.99 mM), and EOAF (cmc ∼1.56 mM), and these are further characterized by various techniques. These novel IL-based MEs have been used as nanoreactors for the sustainable synthesis of uniform nanosized metal-organic frameworks (N-MOFs), such as MIL-53(Al), HKUST-1, UIO-66-NH₂, and ZIF-8, with a precise control over size and morphology at room temperature. Characterization of N-MOFs has been performed using scanning electron microscopy, powder X-ray diffraction, and Fourier transform infrared spectroscopy. The synthesized N-MOFs have been used to prepare stable and uniform thin film nanocomposite nanofiltration membranes, suitable for desalination of brackish water with excellent flux (31.8 LMH/bar) and rejection (99.0%) of divalent salts.

Porous hydrogen-bonded organic framework membranes for high-performance molecular separation

Hydrogen-bonded organic frameworks (HOFs) with intrinsic, tunable, and uniform pores are promising candidates to act as membranes for molecular separation, but they are yet to be explored in this field. Herein, a type of HOF membrane based on a thin-film nanocomposite (TFN) membrane containing porous HOF (PFC-1) nanoparticles was successfully fabricated via a facile interfacial polymerization method. The homogeneously distributed HOF nanoparticles can provide direct channels in the polyamide (PA) active layer for molecule separation. Due to the ultrathin nature of the TFN membrane and the highly ordered porous structure of the PFC-1 nanoparticles, these flexible HOF membranes exhibit both ultrahigh water permeability (∼546.09 L m^-2 h^-1 bar^-1) and the excellent rejection of dye molecules (e.g., rhodamine B rejection of >97.0%). Furthermore, long-term operational stability (>50 min) and satisfactory cycling performance (>5 cycles) have also been achieved. This study may shed light on the fabrication of HOF membranes for liquid-phase molecular separation.

High-Quality Thin Films of UiO-66-NH2 by Coordination Modulated Layer-by-Layer Liquid Phase Epitaxy

We report the fabrication of macroscopically and microscopically homogeneous, crack-free metal-organic framework (MOF) UiO-66-NH2 (UiO: Universitetet i Oslo; [Zr6 O4 (OH)4 (bdc-NH2 )6 ]; bdc-NH2 2- : 2-amino-1,4-benzene dicarboxylate) thin films on silicon oxide surfaces. A DMF-free, low-temperature coordination modulated (CM), layer-by-layer liquid phase epitaxy (LPE) using the controlled secondary building block approach (CSA). Efficient substrate activation was determined as a key factor to obtain dense and smooth coatings by comparing UiO-66-NH2 thin films grown on ozone and piranha acid-activated substrates. Films of 2.60 μm thickness with a minimal surface roughness of 2 nm and a high sorption capacity of 3.53 mmol g-1 MeOH (at 25 °C) were typically obtained in an 80-cycle experiment at mild conditions (70 °C, ambient pressure).

Incorporation of Core-Shell-Structured Zwitterionic Carbon Dots in Thin-Film Nanocomposite Membranes for Simultaneously Improved Perm-Selectivity and Antifouling Properties

The development of highly efficient thin-film nanocomposite (TFN) membranes with superior water permeability, maintained rejection performance, and excellent antifouling capacity is critical to meeting the ever-escalating demand for fresh water. Herein, carbon dots (CDs) grafted with hyperbranched zwitterions, denoted as CDs-ZPEI_0.6-10k, were first prepared by the hydrothermal treatment of citric acid in the presence of zwitterionic hyperbranched polyethylenimine (ZPEI_0.6-10k) with different molecular weights (0.6, 1.8, and 10 kDa). Subsequently, the synthesized nanoparticles were introduced in membrane fabrication to form CDs-ZPEI_0.6-10k-embedded TFN (TFN-CDs-ZPEI_0.6-10k) membranes. The grafted shells of superhydrophilic ZPEI not only increased the chemical compatibility of CDs in the polyamide layer to suppress the formation of nonselective voids but also created a densely packed network for efficient water transportation and effective divalent salt rejection. The TFN-CDs-ZPEI_10k membrane demonstrated a 2.8-fold enhancement in the permeate flux with an increased Na₂SO₄ rejection rate of 98.1% and improved antifouling properties than the pristine thin-film composite (TFC) membrane. This work provides an insight into the development of functionalized core-shell structured nanoparticles to effectively overcome the permeability-selectivity trade-off limitations and fouling problems in TFC membranes.

Network interior and surface engineering of alginate-based beads using sorption affinity component for enhanced phosphate capture

In order to alleviate the environmental problems caused by excessive discharge of phosphate, an environmental friendly and highly efficient bio-sorbent (SA-La@PEI) for phosphate was fabricated by combing strategies of sorption affinity component mediated and poly(ethylenimine) surface engineering of alginate beads. Various characterization methods like SEM, FTIR, XRD and XPS were adopted to examine the morphology and functional group composition of SA-La@PEI. Through detailed tests, SA-La@PEI exhibited excellent adsorption performance of 121.2 mg/g, which was better than most published materials. More importantly, the outstanding phosphate selectivity of SA-La@PEI was exposed when NO₃^-, HCO₃^-, SO₄^2- and Cl^- were added to the phosphate solution. Considering the integrated components in composites, both chemical precipitation and electrostatic attraction can be considered as the dominant mechanisms of phosphate adsorption. Totally, as-prepared SA-La@PEI beads might be a promising sorbent for the decontamination of excessive phosphate because of its low-cost, excellent adsorption performance and mechanical strength.

Polydopamine coated zirconium metal-organic frameworks-based immunochromatographic assay for highly sensitive detection of deoxynivalenol

Conventional immunochromatographic assays (ICAs) based on gold nanoparticles (GNPs) suffer from the disadvantage of low sensitivity. In this work, a highly sensitive ICA based on polydopamine coated zirconium metal-organic frameworks labeled antibodies (ZrPA-Ab) as a novel probe was developed for visual determination of deoxynivalenol (DON). The ZrPA was synthesized via an oxidative self-polymerized assembly (OPMA) strategy using porphyrin functionalized zirconium metal-organic frameworks (Zr-MOFs, MOF-525) and polydopamine (PDA). The Abs could directly attach to the ZrPA surface owing to the large specific surface area, excellent water-stability and bio-compatibility of the ZrPA, on this basis, a sensitive, precise and reliable immunoassay method can be developed for rapid and selective detection of DON. Under optimized conditions, a non-linear calibration curve was obtained in the range of 0-50 ng/mL DON concentration with an IC₅₀ of 1.22 ng/mL, and the visual detection limit was 0.18 ng/mL, which was about 8-times more sensitive than that of the conventional GNPs-based ICA. Finally, the proposed ZrPA-ICA was successfully applied for the detection of DON in pig hind legs meat, green bean, maize and millet samples, revealing the feasible and reliable application of this biosensor in different food matrices. Thus, this work broadens the possibilities for the use of MOFs as a novel labeling carrier in immunoassays.