Mechanism of Anion-Catalyzed C–H Silylation Using TMSCF 3 : Kinetically-Controlled CF 3 -Anionoid Partitioning As a Key Parameter

Making Full Use of TMSCF3: Deoxygenative Trifluoromethylation/Silylation of Amides

As one of the most powerful trifluoromethylation reagents, (trifluoromethyl)trimethylsilane (TMSCF3) has been widely used for the synthesis of fluorine-containing molecules. However, to the best of our knowledge, the simultaneous incorporation of both TMS- and CF3- groups of this reagent onto the same carbon of the products has not been realized. Herein, we report an unprecedented SmI2/Sm promoted deoxygenative difunctionalization of amides with TMSCF3, in which both silyl and trifluoromethyl groups are incorporated into the final product, yielding α-silyl-α-trifluoromethyl amines with high efficiency. Notably, the silyl group could be further transformed into other functional groups, providing a new method for the synthesis of α-quaternary α-CF3-amines.

Speciation and kinetics of fluoride transfer from tetra-n-butylammonium difluorotriphenylsilicate ('TBAT')

Tetra-n-butylammonium difluorotriphenylsilicate (TBAT) is a conveniently handled anhydrous fluoride source, commonly used as a surrogate for tetra-n-butylammonium fluoride (TBAF). While prior studies indicate that TBAT reacts rapidly with fluoride acceptors, little is known about the mechanism(s) of fluoride transfer. We report on the interrogation of the kinetics of three processes in which fluoride is transferred from TBAT, in THF and in MeCN, using a variety of NMR methods, including chemical exchange saturation transfer, magnetisation transfer, diffusion analysis, and 1D NOESY. These studies reveal ion-pairing between the tetra-n-butylammonium and difluorotriphenylsilicate moieties, and a very low but detectable degree of fluoride dissociation, which then undergoes further equilibria and/or induces decomposition, depending on the conditions. Degenerate exchange between TBAT and fluorotriphenylsilane (FTPS) is very rapid in THF, inherently increases in rate over time, and is profoundly sensitive to the presence of water. Addition of 2,6-di-tert-butylpyridine and 3 Å molecular sieves stabilises the exchange rate, and both dissociative and direct fluoride transfer are shown to proceed in parallel under these conditions. Degenerate exchange between TBAT and 2-naphthalenyl fluorosulfate (ARSF) is not detected at the NMR timescale in THF, and is slow in MeCN. For the latter, the exchange is near-fully inhibited by exogenous FTPS, indicating a predominantly dissociative character to this exchange process. Fluorination of benzyl bromide (BzBr) with TBAT in MeCN-d3 exhibits moderate progressive autoinhibition, and the initial rate of the reaction is supressed by the presence of exogenous FTPS. Overall, TBAT can act as a genuine surrogate for TBAF, as well as a reservoir for rapidly-reversible release of traces of it, with the relative contribution of the pathways depending, inter alia, on the identity of the fluoride acceptor, the solvent, and the concentration of endogenous or exogenous FTPS.

TMSCF3-Mediated Conversion of Salicylates into α,α-Difluoro-3-coumaranones: Chain Kinetics, Anion-Speciation, and Mechanism

As reported by Zhao, the TBAT ([Ph3SiF2]-[Bu4N]+)-initiated reaction of ethyl salicylate with TMSCF3 in THF generates α,α-difluoro-3-coumaranones via the corresponding O-silylated ethoxy ketals. The mechanism has been investigated by in situ 19F and 29Si NMR spectroscopy, CF2-trapping, competition, titration, and comparison of the kinetics with the 3-, 4-, 5-, and 6-fluoro ethyl salicylate analogues and their O-silylated derivatives. The process evolves in five distinct stages, each arising from a discrete array of anion speciations that modulate a sequence of silyl-transfer chain reactions. The deconvolution of coupled equilibria between salicylate, [CF3]-, and siliconate [Me3Si(CF3)2]- anions allowed the development of a kinetic model that accounts for the first three stages. The model provides valuable practical insights. For example, it explains how the initial concentrations of the TMSCF3 and salicylate and the location of electron-withdrawing salicylate ring substituents profoundly impact the overall viability of the process, how stoichiometric CF3H generation can be bypassed by using the O-silylated salicylate, and how the very slow liberation of the α,α-difluoro-3-coumaranone can be rapidly accelerated by evaporative or aqueous workup.

Latent Carbene in Diaminomethylation of Benzenes: Mechanism and Practical Application

Silylformamidine 1 exists in equilibrium with its carbenic form 1' due to an easy migration of the silyl group. The reaction of 1 with variously substituted fluorobenzenes proceeds as an insertion of the nucleophilic carbene 1' into the most acidic C-H bond upon mixing the reagents and does not require any catalyst. According to DFT calculations, the classical interpretation of the insertion reaction proceeding via a three-membered transition state structure requires high activation energy. Instead, low activation barriers are predicted for a transfer of the most acidic proton in the aromatic substrate to the carbene carbon. As the next step, a barrierless rearrangement of the formed ion pair toward the product completes the process. The reactivity of substituted benzenes in the reaction with silylformamidine can be roughly assessed by calculated pK_a (DMSO) values for the C-H hydrogens. Benzene derivatives having pK_a approx. less than 31 can undergo C-H insertion. The reaction provides aminals as the first products, which can easily be transformed into the corresponding aldehydes via acidic hydrolysis. As silylformamidine 1 is tolerant to many functional groups, the reaction can be applied to numerous benzene derivatives, making it a reliable strategy for application in organic synthesis.

Metal-Free C-H Difluoromethylation of Imidazoles with the Ruppert-Prakash Reagent

The reaction of trimethyl(trifluoromethyl)silane-tetrabutylammonium difluorotriphenylsilicate (CF₃SiMe₃-TBAT) with a series of imidazoles gives products of the formal difluorocarbene insertion into the C-H bond at the C-2 position (i.e., C-difluoromethylation). According to NMR spectra, the corresponding 2-(trimethylsilyl)difluoromethyl-substituted derivatives are likely formed as the intermediates in the reaction, and then, they slowly convert to 2-difluoromethyl-substituted imidazoles. Quantum chemical calculations of two plausible reaction mechanisms indicate that it proceeds through the intermediate imidazolide anion stabilized through the interaction with solvent molecules and counterions. In the first proposed mechanism, the anion reacts with difluorocarbene without an activation barrier, and then, the CF₂ moiety of the adduct attacks the CF₃SiMe₃ molecule. After the elimination of the CF₃ anion, 2-(trimethylsilyl)difluromethyl-substituted imidazole is formed. Another possible reaction pathway includes silylation of imidazolide anion at the N-3 atom, followed by the barrierless addition of difluorocarbene at the C-2 atom and then by 1,3-shift of the SiMe₃ group from N-3 to the carbon atom of the CF₂ moiety. Both proposed mechanisms do not include steps with high activation barriers.

Palladium-Catalyzed Aryldifluoromethylation of Aryl Halides with Aryldifluoromethyl Trimethylsilanes

Diaryl difluoromethanes are valuable targets for medicinal chemistry because they are bioisosteres of diaryl ethers and can function as replacements for diaryl methane, ketone, and sulfone groups. However, methods to prepare diaryl difluoromethanes are scarce, especially methods starting from abundant aryl halides. We report the Pd-catalyzed aryldifluoromethylation of aryl halides with aryldifluoromethyl trimethylsilanes (TMSCF2 Ar). The reaction occurs when the catalyst contains a simple, but unusual, dialkylaryl phosphine ligand that promotes transmetallation of the silane. Computational studies show that reductive elimination following transmetallation occurs with a low barrier, despite the fluorine atoms on the α-carbon, due to coordination of the difluorobenzyl π-system to palladium. The co-development of a cobalt-catalyzed synthesis of the silanes broadened the scope of the process including several applications to the synthesis biologically relevant diaryl difluoromethanes.

In Situ Studies of Arylboronic Acids/Esters and R3SiCF3 Reagents: Kinetics, Speciation, and Dysfunction at the Carbanion-Ate Interface

Reagent instability reduces the efficiency of chemical processes, and while much effort is devoted to reaction optimization, less attention is paid to the mechanistic causes of reagent decomposition. Indeed, the response is often to simply use an excess of the reagent. Two reaction classes with ubiquitous examples of this are the Suzuki-Miyaura cross-coupling of boronic acids/esters and the transfer of CF₃ or CF₂ from the Ruppert-Prakash reagent, TMSCF₃. This Account describes some of the overarching features of our mechanistic investigations into their decomposition. In the first section we summarize how specific examples of (hetero)arylboronic acids can decompose via aqueous protodeboronation processes: Ar-B(OH)₂ + H₂O → ArH + B(OH)₃. Key to the analysis was the development of a kinetic model in which pH controls boron speciation and heterocycle protonation states. This method revealed six different protodeboronation pathways, including self-catalysis when the pH is close to the pK_a of the boronic acid, and protodeboronation via a transient aryl anionoid pathway for highly electron-deficient arenes. The degree of "protection" of boronic acids by diol-esterification is shown to be very dependent on the diol identity, with six-membered ring esters resulting in faster protodeboronation than the parent boronic acid. In the second section of the Account we describe ¹⁹F NMR spectroscopic analysis of the kinetics of the reaction of TMSCF₃ with ketones, fluoroarenes, and alkenes. Processes initiated by substoichiometric "TBAT" ([Ph₃SiF₂][Bu₄N]) involve anionic chain reactions in which low concentrations of [CF₃]^- are rapidly and reversibly liberated from a siliconate reservoir, [TMS(CF₃)₂][Bu₄N]. Increased TMSCF₃ concentrations reduce the [CF₃]^- concentration and thus inhibit the rates of CF₃ transfer. Computation and kinetics reveal that the TMSCF₃ intermolecularly abstracts fluoride from [CF₃]^- to generate the CF₂, in what would otherwise be an endergonic α-fluoride elimination. Starting from [CF₃]^- and CF₂, a cascade involving perfluoroalkene homologation results in the generation of a hindered perfluorocarbanion, [C₁₁F₂₃]^-, and inhibition. The generation of CF₂ from TMSCF₃ is much more efficiently mediated by NaI, and in contrast to TBAT, the process undergoes autoacceleration. The process involves NaI-mediated α-fluoride elimination from [CF₃][Na] to generate CF₂ and a [NaI·NaF] chain carrier. Chain-branching, by [(CF₂)₃I][Na] generated in situ (CF₂ + TFE + NaI), causes autoacceleration. Alkenes that efficiently capture CF₂ attenuate the chain-branching, suppress autoacceleration, and lead to less rapid difluorocyclopropanation. The Account also highlights how a collaborative approach to experiment and computation enables mechanistic insight for control of processes.

Cu-Catalyzed Dual C-O Bonds Cleavage of Cyclic Ethers with Carboxylic Acids, NaI, and TMSCF3 to Give Iodoalkyl Ester

Herein, by dual C-O bond cleavage of cyclic ethers with Cu catalysis, we eventually led to the development of a selective three-component coupling of commercially available chemicals, carboxylic acids, ethers, and halogens to synthesize more than 70 iodoalkyl esters in the presence of TMSCF₃. This allows for the concise synthesis of highly functionalized iodoalkyl esters directly. And the synthetic insect pheromones were also disclosed.

Visible-light-promoted olefinic trifluoromethylation of enamides with CF3SO2Na

A visible-light-promoted olefinic C-H trifluoromethylation of enamides was developed by employing cheap and stable Langlois' reagent as the CF₃ source. A series of β-CF₃ enamides were obtained in moderate to good yields with high E-isomer selectivity under mild conditions. Preliminary mechanistic studies suggest that molecular oxygen acts as the terminal oxidant for this net oxidative process, and the E isomer selectivity could be well explained by a base-assisted deprotonation of the cation intermediate.