Activation of H2O2 over Zr(IV). Insights from Model Studies on Zr-Monosubstituted Lindqvist Tungstates

Heterogeneous H2O2-based selective oxidations over zirconium tungstate α-ZrW2O8

Catalytic properties of a crystalline zirconium tungstate, ZrW2O8, the material known mainly for its isotropic negative coefficient of thermal expansion, have been assessed for the liquid-phase selective oxidation of a range of organic substrates comprising CC, OH, S and other functional groups using aqueous hydrogen peroxide as the green oxidant. Samples of ZrW2O8 were prepared by hydrothermal synthesis and characterised by N2 adsorption, PXRD, SEM, EDX, FTIR and Raman spectroscopic techniques. Studies by IR spectroscopy of adsorbed probe molecules (CO and CDCl3) revealed the presence of Brønsted acidic and basic sites on the surface of ZrW2O8. It was demonstrated that ZrW2O8 is able to activate H2O2 under mild conditions and accomplish the epoxidation of CC bonds in alkenes and unsaturated ketones, oxidation of thioethers to sulfoxides and sulfones, along with the oxidation of alcoholic functions to produce ketones and aldehydes. The oxidation of tetramethylethylene and α-terpinene over ZrW2O8 revealed the formation of peroxidation products, 2,3-dimethyl-3-butene-2-hydroperoxide and endoperoxide ascaridole, respectively, indicating the involvement of singlet oxygen in the oxidation process. The ZrW2O8 catalyst preserves its structure and morphology under the turnover conditions and does not suffer from metal leaching. It can be easily recovered, regenerated by calcination, and reused without the loss of activity and selectivity.

Correction: Development of a chromium oxide loaded mesoporous silica as an efficient catalyst for carbon dioxide-free production of ethylene oxide

[This corrects the article DOI: 10.1039/D3RA05858A.].

Tuning Reactivity of Zr-Substituted Keggin Phosphotungstate in Alkene Epoxidation through Balancing H2O2 Activation Pathways: Unusual Effect of Base

The Zr-monosubstituted Keggin-type dimeric phosphotungstate (Bu4N)8[{PW11O39Zr(μ-OH)(H2O)}2] (1) efficiently catalyzes epoxidation of C═C bonds in various kinds of alkenes, including terminal ones, with aqueous H2O2 as oxidant. Less sterically hindered double bonds are preferably epoxidized despite their lower nucleophilicity. Basic additives (Bu4NOH) in the amount of 1 equiv per dimer 1 suppress H2O2 unproductive decomposition, increase substrate conversion, improve yield of heterolytic oxidation products and oxidant utilization efficiency, and also affect regioselectivity of epoxidation, enhancing oxygen transfer to sterically hindered electron-rich C═C bonds. Acid additives produce a reverse effect on the substrate conversion and H2O2 efficiency. The reaction mechanism was explored using a range of test substrates, kinetic, and spectroscopic tools. The opposite effects of acid and base additives on alkene epoxidation and H2O2 degradation have been rationalized in terms of their impact on hydrolysis of 1 to form monomeric species, [PW11O39Zr(OH)(H2O)x]4- (1-M, x = 1 or 2), which favors H2O2 homolytic decomposition. The interaction of 1 with H2O2 has been investigated by HR-ESI-MS, ATR-FT-IR, and 31P NMR spectroscopic techniques. The combination of spectroscopic studies and kinetic modeling implicated the existence of two types of dimeric peroxo complexes, [Zr2(μ-η2:η2-O2){PW11O39}2(H2O)x]]8- and [{Zr(μ-η2-O2)}2(PW11O39)2(H2O)y]10-, along with monomeric Zr (hydro)peroxo species that begin to dominate at a high excess of H2O2. Both dimeric μ-η2-peroxo intermediates are inert toward alkenes under stoichiometric conditions. V-shape Hammett plots obtained for epoxidation of p-substituted styrenes suggested a biphilic nature of the active oxidizing species, which are monomeric Zr-hydroperoxo and peroxo species. Small basic additives increase the electrophilicity of the catalyst and decrease its nucleophilicity. HR-ESI-MS has identified a dimeric, most likely, bridging hydroperoxo species [{PW11O39Zr}2(μ-O)(μ-OOH)]9-, which may account for the improved epoxidation selectivity and regioselectivity toward sterically hindered C═C bonds.

Development of a chromium oxide loaded mesoporous silica as an efficient catalyst for carbon dioxide-free production of ethylene oxide

Ethylene oxide (EO) is a significant raw material used in many commodities for consumers, particularly ethoxylates, polymers, and certain other glycol derivatives. We synthesized a catalyst by incorporation of chromium oxide into a mesoporous silica material (Cr/MSM) via the hydrothermal method, an effective catalyst for partial ethylene oxidation for producing carbon dioxide (CO2) free EO. Subsequently, XRD, BET, XPS, and TEM were used to analyse the structural characteristics of the Cr/MSM catalyst. The catalytic performance of the synthesized catalyst was assessed in the liquid-phase epoxidation (LPE) of ethylene, utilizing peracetic acid (PAA) as an oxidant. This approach not only circumvented the generation of CO2 but also mitigated the risk of metal leaching. Confirmation of the successful production of EO was achieved through GC chromatography, where the presence of a peak with a retention time (RT) of 8.91 minutes served as conclusive evidence. We systematically explored a range of reaction parameters, including temperature, catalyst concentration, the molar ratio of ethylene to PAA, and solvent effect. This comprehensive investigation aimed to fine-tune the reaction conditions, ultimately improving ethylene conversion and enhancing the selectivity of the catalyst for EO production. This approach can effectively resolve the issues of greenhouse gas emissions and metal leaching that had been associated with previously reported catalysts.

Efficient oxidation of sulfides to sulfoxides catalyzed by heterogeneous Zr-containing polyoxometalate grafted on graphene oxide

In this study, a tri-component composite named Zr/SiW12/GO was meticulously prepared through an ultrasonic-assisted method. This composite incorporates zirconium nanoparticles (Lewis acid), a negatively charged Keggin type polyoxometalate, and graphene oxide, and serves as a remarkable heterogeneous catalyst. The Keggin component plays multiple roles as reducing, encapsulating, and bridging agents, resulting in a cooperative effect among the three components that significantly enhances the catalytic activity. The catalytic performance of Zr/SiW12/GO was thoroughly investigated in the oxidation of sulfides to sulfoxides under mild conditions, employing H2O2 as the oxidant. Remarkably, this composite exhibited exceptional stability and could be effortlessly recovered and reused up to four times without any noticeable loss in its catalytic activity.

Defect-Mediated Synergistic Effect of POM/UiO-66(Zr) Host-Guest Catalysts for Robust Deep Desulfurization at Ambient Temperature

Stable platforms of host-guest catalysts are indispensable in the field of heterogeneous catalysis, however, clarifying the specific effect of host remains challenging. Herein, polyoxometalate (POM) is encapsulated in three types of UiO-66(Zr) with different controlled densities of defects by the aperture opening and closing strategy at ambient-temperature. It is found that catalytic activity of POM for oxidative desulfurization (ODS) at room temperature is turned on when encapsulated in the defective UiO-66(Zr), and the sulfur oxidation efficiency shows an obvious increasing trend (from 0.34 to 10.43 mmol g-1 h-1 ) with the increased concentration of defects in UiO-66(Zr) host. The as-prepared catalyst with the most defective host displays ultrahigh performance which removed 1000 ppm sulfur with exceptionally diluted oxidant at room-temperature within 25 min. The turnover frequency can reach 620.0 h-1 at 30 °C, which surpassed all the reported MOFs based ODS catalysts. A substantial guest/host synergistic effect mediated by the defective sites in UiO-66(Zr) is responsible for the enhancement. Density functional theory calculations reveal that OH/OH2 capped on the open Zr sites of host UiO-66(Zr) can decompose H2 O2 to OOH group and enables the formation of WVI -peroxo intermediates that determine the ODS activity.

Resolving the Mechanism for H2O2 Decomposition over Zr(IV)-Substituted Lindqvist Tungstate: Evidence of Singlet Oxygen Intermediacy

The decomposition of hydrogen peroxide (H2O2) is the main undesired side reaction in catalytic oxidation processes of industrial interest that make use of H2O2 as a terminal oxidant, such as the epoxidation of alkenes. However, the mechanism responsible for this reaction is still poorly understood, thus hindering the development of design rules to maximize the efficiency of catalytic oxidations in terms of product selectivity and oxidant utilization efficiency. Here, we thoroughly investigated the H2O2 decomposition mechanism using a Zr-monosubstituted dimeric Lindqvist tungstate, (Bu4N)6[{W5O18Zr(μ-OH)}2] ({ZrW5}2), which revealed high activity for this reaction in acetonitrile. The mechanism of the {ZrW5}2-catalyzed H2O2 degradation in the absence of an organic substrate was investigated using kinetic, spectroscopic, and computational tools. The reaction is first order in the Zr catalyst and shows saturation behavior with increasing H2O2 concentration. The apparent activation energy is 11.5 kcal·mol-1, which is significantly lower than the values previously found for Ti- and Nb-substituted Lindqvist tungstates (14.6 and 16.7 kcal·mol-1, respectively). EPR spectroscopic studies indicated the formation of superoxide radicals, while EPR with a specific singlet oxygen trap, 2,2,6,6-tetramethylpiperidone (4-oxo-TEMP), revealed the generation of 1O2. The interaction of test substrates, α-terpinene and tetramethylethylene, with H2O2 in the presence of {ZrW5}2 corroborated the formation of products typical of the oxidation processes that engage 1O2 (endoperoxide ascaridole and 2,3-dimethyl-3-butene-2-hydroperoxide, respectively). While radical scavengers tBuOH and p-benzoquinone produced no effect on the peroxide product yield, the addition of 4-oxo-TEMP significantly reduced it. After optimization of the reaction conditions, a 90% yield of ascaridole was attained. DFT calculations provided an atomistic description of the H2O2 decomposition mechanism by Zr-substituted Lindqvist tungstate catalysts. Calculations showed that the reaction proceeds through a Zr-trioxidane [Zr-η2-OO(OH)] key intermediate, whose formation is the rate-determining step. The Zr-substituted POM activates heterolytically a first H2O2 molecule to generate a Zr-peroxo species, which attacks nucleophilically to a second H2O2, causing its heterolytic O-O cleavage to yield the Zr-trioxidane complex. In agreement with spectroscopic and kinetic studies, the lowest-energy pathway involves dimeric Zr species and an inner-sphere mechanism. Still, we also found monomeric inner- and outer-sphere pathways that are close in energy and could coexist with the dimeric one. The highly reactive Zr-trioxidane intermediate can evolve heterolytically to release singlet oxygen and also decompose homolytically, producing superoxide as the predominant radical species. For H2O2 decomposition by Ti- and Nb-substituted POMs, we also propose the formation of the TM-trioxidane key intermediate, finding good agreement with the observed trends in apparent activation energies.

Organoantimony Dihydroperoxides: Synthesis, Crystal Structures, and Hydrogen Bonding Networks

Despite growing interest in the potential applications of p-block hydroperoxo complexes, the chemistry of inorganic hydroperoxides remains largely unexplored. For instance, single-crystal structures of antimony hydroperoxo complexes have not been reported to date. Herein, we present the synthesis of six triaryl and trialkylantimony dihydroperoxides [Me₃Sb(OOH)₂, Me₃Sb(OOH)₂·H₂O, Ph₃Sb(OOH)₂·0.75(C₄H₈O), Ph₃Sb(OOH)₂·2CH₃OH, pTol₃Sb(OOH)₂, pTol₃Sb(OOH)₂·2(C₄H₈O)], obtained by the reaction of the corresponding dibromide antimony(V) complexes with an excess of highly concentrated hydrogen peroxide in the presence of ammonia. The obtained compounds were characterized by single-crystal and powder X-ray diffraction, Fourier transform infrared and Raman spectroscopies, and thermal analysis. The crystal structures of all six compounds reveal hydrogen-bonded networks formed by hydroperoxo ligands. In addition to the previously reported double hydrogen bonding, new types of hydrogen-bonded motifs formed by hydroperoxo ligands were found, including infinite hydroperoxo chains. Solid-state density functional theory calculation of Me₃Sb(OOH)₂ revealed reasonably strong hydrogen bonding between OOH ligands with an energy of 35 kJ/mol. Additionally, the potential application of Ph₃Sb(OOH)₂·0.75(C₄H₈O) as a two-electron oxidant for the enantioselective epoxidation of olefins was investigated in comparison with Ph₃SiOOH, Ph₃PbOOH, t-BuOOH, and H₂O₂.

Regioselective protein oxidative cleavage enabled by enzyme-like recognition of an inorganic metal oxo cluster ligand

Oxidative modifications of proteins are key to many applications in biotechnology. Metal-catalyzed oxidation reactions efficiently oxidize proteins but with low selectivity, and are highly dependent on the protein surface residues to direct the reaction. Herein, we demonstrate that discrete inorganic ligands such as polyoxometalates enable an efficient and selective protein oxidative cleavage. In the presence of ascorbate (1 mM), the Cu-substituted polyoxometalate K₈[Cu²⁺(H₂O)(α₂-P₂W₁₇O₆₁)], (Cu^IIWD, 0.05 mM) selectively cleave hen egg white lysozyme under physiological conditions (pH =7.5, 37 °C) producing only four bands in the gel electropherogram (12.7, 11, 10, and 5 kDa). Liquid chromatography/mass spectrometry analysis reveals a regioselective cleavage in the vicinity of crystallographic Cu^IIWD/lysozyme interaction sites. Mechanistically, polyoxometalate is critical to position the Cu at the protein surface and limit the generation of oxidative species to the proximity of binding sites. Ultimately, this study outlines the potential of discrete, designable metal oxo clusters as catalysts for the selective modification of proteins through radical mechanisms under non-denaturing conditions.

Contrasting Trivalent Lanthanide and Actinide Complexation by Polyoxometalates via Solution-State NMR

Deciphering the solution chemistry and speciation of actinides is inherently difficult due to radioactivity, rarity, and cost constraints, especially for transplutonium elements. In this context, the development of new chelating platforms for actinides and associated spectroscopic techniques is particularly important. In this study, we investigate a relatively overlooked class of chelators for actinide binding, namely, polyoxometalates (POMs). We provide the first NMR measurements on americium-POM and curium-POM complexes, using one-dimensional (1D) ³¹P NMR, variable-temperature NMR, and spin-lattice relaxation time (T₁) experiments. The proposed POM-NMR approach allows for the study of trivalent f-elements even when only microgram amounts are available and in phosphate-containing solutions where f-elements are typically insoluble. The solution-state speciation of trivalent americium, curium, plus multiple lanthanide ions (La³⁺, Nd³⁺, Sm³⁺, Eu³⁺, Yb³⁺, and Lu³⁺), in the presence of the model POM ligand PW₁₁O₃₉^7- was elucidated and revealed the concurrent formation of two stable complexes, [M^III(PW₁₁O₃₉)(H₂O)_x]^4- and [M^III(PW₁₁O₃₉)₂]^11-. Interconversion reaction constants, reaction enthalpies, and reaction entropies were derived from the NMR data. The NMR results also provide experimental evidence of the weakly paramagnetic nature of the Am³⁺ and Cm³⁺ ions in solution. Furthermore, the study reveals a previously unnoticed periodicity break along the f-element series with the reversal of T₁ relaxation times of the 1:1 and 1:2 complexes and the preferential formation of the long T₁ species for the early lanthanides versus the short T₁ species for the late lanthanides, americium, and curium. Given the broad variety of POM ligands that exist, with many of them containing NMR-active nuclei, the combined POM-NMR approach reported here opens a new avenue to investigate difficult-to-study elements such as heavy actinides and other radionuclides.

Synthesis and oxidation catalysis of a difluoride-incorporated polyoxovanadate and isolation of active vanadium alkylperoxo species

Haloperoxidase-mimetic peroxo-vanadium species on an inorganic support showed catalytic reactivity for the epoxidation and bromination of alkenes. The structures of both native and peroxo forms were determined via single-crystal X-ray analysis.

In situ ball-milling gram-scale preparation of polyoxoniobate-intercalated MgAl-layered double hydroxides for selective aldol and Michael addition cascade reactions

A facile one-step ball-milling strategy to prepare gram-scale Mg3Al-LDH-Nb6 has been demonstrated and the thus-obtained catalyst exhibited efficient selective catalytic activities in the synthesis of biologically active organic molecules in water.