Ultra-thin Two-Dimensional Trimetallic Metal–Organic Framework for Photocatalytic Reduction of CO2

Highly Efficient and Selective Photocatalytic CO2 Reduction to Ethanol by Cu4 Clusters with Adjacent Cu Single Atoms Anchored on Carbon Nitride

An efficient photocatalyst for CO2-to-CH3CH2OH conversion comprising atomically dispersed Cu clusters (Cu4) and single Cu sites coordinated with 2 N and 1 O anchored on two-step calcinated C3N4 (Cu4/Cu1@CN) is reported. It was found to catalyze the reduction of CO2 to ethanol with production rate of 154 µmol g-1 h-1 and selectivity of 98%, the yield rate and selectivity exceed most of the reported results for ethanol production. Experimental and theoretical calculations indicate that the high efficiency of this catalyst arises from the strong synergy between Cu4 clusters and adjacent Cu single atoms, which facilitates OC─CO coupling and promotes ethanol production.

Revisiting Photocatalytic CO2 Reduction to Methanol: A Perspective Focusing on Metal-Organic Frameworks

Photocatalytic CO2 reduction to CH3OH, particularly with metal-organic frameworks (MOFs) as photocatalysts, has garnered significant attention due to its long-term potential to harness sunlight for converting CO2 into a valuable fuel and chemical feedstock. Numerous studies in the literature report the successful formation of CH3OH from photocatalytic CO2 reduction, sometimes supplemented with sacrificial agents, with claims substantiated by isotopic labelling measurements. However, in this Scientific Perspective, we note that much of the existing evidence has not been obtained under sufficiently rigorous experimental conditions to conclusively confirm the formation of a highly reactive product like CH3OH from the chemically stable CO2 molecule. This Scientific Perspective outlines best practices designed to provide robust evidence for CH3OH formation in photocatalytic processes, which could be instrumental in clarifying the state-of-the-art and accelerating the development of this technology toward practical applications.

Two-dimensional metal organic framework nanosheets in electrocatalysis

The thin layered structure and porous structure in two-dimensional metal organic framework (2D MOF) nanosheets have rapidly emerged as promising catalytic materials in the electrocatalytic reaction, because 2D MOF nanosheets not only provide larger active surface area, more edge active sites, and larger activation surface area, but they can also achieve rapid mass transfer and accelerate the reaction process in catalytic reactions. However, despite extensive research, the practical application of 2D MOFs remains limited due to challenges in scalability, stability, and integration with real-world devices. Herein, we summarized the latest progress in the deliberate engineering of 2D MOF nanosheets as a catalyst for electrocatalytic reactions, with a particular focus on their electrocatalytic and energy-related applications. The two major synthetic pathways of 2D MOF nanosheets are reviewed, including the top-down method and bottom-up method, and the recent development of synthetic methods is also discussed. Unlike existing reviews that primarily focus on theoretical aspects or specific applications, this work integrates insights from both experimental and computational studies, offering a holistic view of the field. This review highlights the importance of rational material design, scalable synthesis methods, and robust performance evaluation protocols. By bridging the gap between fundamental research and practical application, this review aims to accelerate the transition of 2D MOFs from laboratory-scale studies to real-world solutions, ultimately contributing to the development of sustainable and efficient energy systems.

Facts and Fictions About Photocatalytic CO2 Reduction to C2+ Products

In response to carbon neutrality, photocatalytic reduction of CO2 has been the subject of growing interest for researchers over the past few years. Multi-carbon products (C2+) with higher energy density and larger market value produced from photocatalytic reduction of CO2 are still very limited owing to the low photocatalytic productivity and poor selectivity of products. This review focuses on the recent progress on photocatalytic reduction of CO2 towards C2+ products from the perspective of performance evaluation and mechanistic understanding. We first provide a systematic description of the entire fundamental procedures of photocatalytic reduction of CO2. An in-depth strategy analysis for improving the selectivity of photocatalytic reduction of CO2 to C2+ products is then addressed. Then the focus was on summarizing the ways to improve C2+ selectivity. The intrinsic mechanisms of photocatalytic reduction of CO2 to C2+ products are summarized in the final. Combining the foundation of photocatalysis with promising catalyst strategies, this review will offer valuable guidance for the development of efficient photocatalytic systems for the synthesis of C2+ products.

Exchange of CO2 with CO as Reactant Switches Selectivity in Photoreduction on Co-ZrO2 from C1-3 Paraffin to Small Olefins

Photocatalytic reduction of CO2 into C2,3 hydrocarbons completes a C-neutral cycle. The reaction pathways of photocatalytic generation of C2,3 paraffin and C2H4 from CO2 are mostly unclear. Herein, a Co0-ZrO2 photocatalyst converted CO2 into C1-3 paraffin, while selectively converting CO into C2H4 and C3H6 (6.0±0.6 μmol h-1 gcat -1, 70 mol %) only under UV/Visible light. The photocatalytic cycle was conducted under 13CO and H2, with subsequent evacuation and flushing with CO. This iterative process led to an increase in the population of C2H4 and C3H6 up to 61-87 mol %, attributed to the accumulation of CH2 species at the interface between Co0 nanoparticles and the ZrO2 surface. CO2 adsorbed onto the O vacancies of the ZrO2 surface, with resulting COH species undergoing hydrogenation on the Co0 surface to yield C1-3 paraffin using either H2 or H2O (g, l) as the reductant. In contrast, CO adsorbed on the Co0 surface, converted to HCOH species, and then split into CH and OH species at the Co and O vacancy sites on ZrO2, respectively. This comprehensive study elucidates intricate photocatalytic pathways governing the transformation of CO2 into paraffin and CO to olefins.

Rare Earth Er-Nd Dual Single-Atomic Catalysts for Efficient Visible-light Induced CO2 Reduction to CnH2n+1OH (n=1, 2)

Efficient synthesis of CnH2n+1OH (n=1, 2) via photochemical CO2 reduction holds promise for achieving carbon neutrality but remains challenging. Here, we present rare earth dual single atoms (SAs) catalysts containing ErN6 and NdN6 moieties, fabricated via an atom-confinement and coordination method. The dual Er-Nd SAs catalysts exhibit unprecedented generation rates of 1761.4 μmol g-1 h-1 and 987.7 μmol g-1 h-1 for CH3CH2OH and CH3OH, respectively. Through a combination of theoretical calculation, XAFS analysis, aberration-corrected HAADF-STEM, and in-situ FTIR spectroscopy, we demonstrate that the Er SAs facilitate charge transfer, serving as active centers for C-C bond formation, while Nd SAs provide the necessary *CO for C-C coupling in C2H5OH synthesis under visible light. Furthermore, the experiment and DFT calculation elucidate that the variety of electronic states induced by 4 f orbitals of the Er SAs and the p-f orbital hybridization of Er-N moieties enable the formation of charge-transfer channel. Therefore, this study sheds light on the pivotal role of *CO adsorption in achieving efficient conversion from CO2 to CnH2n+1OH (n=1, 2) via a novel rare earth-based dual SAs photocatalysis approach.

Entropy Engineering of 2D Materials

Entropy, a measure of disorder or uncertainty in the thermodynamics system, has been widely used to confer desirable functions to alloys and ceramics. The incorporation of three or more principal elements into a single sublattice increases the entropy to medium and high levels, imparting these materials a mélange of advanced mechanical and catalytic properties. In particular, when scaling down the dimensionality of crystals from bulk to the 2D space, the interplay between entropy stabilization and quantum confinement offers enticing opportunities for exploring new fundamental science and applications, since the structural ordering, phase stability, and local electronic states of these distorted 2D materials get significantly reshaped. During the last few years, the large family of high-entropy 2D materials is rapidly expanding to host MXenes, hydrotalcites, chalcogenides, metal-organic frameworks (MOFs), and many other uncharted members. Here, the recent advances in this dynamic field are reviewed, elucidating the influence of entropy on the fundamental properties and underlying elementary mechanisms of 2D materials. In particular, their structure-property relationships resulting from theoretical predictions and experimental findings are discussed. Furthermore, an outlook on the key challenges and opportunities of such an emerging field of 2D materials is also provided.

Synergistic Interactions of Bulk Polarization and Built-In Electric Field Inducing 2D/2D S-Scheme Homojunction Toward Enhanced Photocatalytic Performance

The rational design of S-scheme photocatalysts, achieved by serially integrating two different semiconductors, represents a promising strategy for efficient charge separation and amplified photocatalytic performance, yet it remains a challenge. Herein, ZnIn2S4 (ZIS) and oxygen-doped ZnIn2S4 (O-ZIS) nanosheets are chosen to construct a homojunction catalyst architecture. Theoretical simulations alongside comprehensive in situ and ex situ characterizations confirm that ZIS and O-ZIS with noncentrosymmetric layered structures can generate a polarization-induced bulk-internal electric field (IEF) within the crystal. A robust interface-IEF is also created by the strong interfacial interaction between O-ZIS and ZIS with different work functions. Owing to these features, the O-ZIS/ZIS homojunction adopts an S-scheme directional charge transfer route, wherein photoexcited electrons in ZIS and holes in O-ZIS concurrently migrate to their interface and subsequently recombine. This enables spatial charge separation and provides a high driving force for both reduction and oxidation reactions simultaneously. Consequently, such photocatalyst exhibits an H2 evolution rate up to 142.9 µmol h-1 without any cocatalysts, which is 4.6- and 3.4-fold higher than that of pristine ZIS and O-ZIS, respectively. Benzaldehyde is also produced as a value-added oxidation product with a rate of 146.9 µmol h-1. This work offers a new perspective on the design of S-scheme systems.

Reticular Materials for Photocatalysis

Photocatalysis leverages solar energy to overcome the thermodynamic barrier, enabling efficient chemical reactions under mild conditions. It can greatly reduce reliance on traditional energy sources and has attracted significant research interest. Reticular materials, including metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), represent a class of crystalline materials constructed from molecular building blocks linked by coordination and covalent bonds, respectively. Reticular materials function as heterogeneous catalysts, combining well-defined structures and high tailorability akin to homogeneous catalysts. In this review, the regulation of light absorption, charge separation, and surface reactions in the photocatalytic process through precise molecular-level design based on the features of reticular materials is elaborated. Notably, for MOFsmicroenvironment modulation around catalytic sites affects photocatalytic performance is delved, with emphasis on their unique dynamic and flexible microenvironments. For COFs, the inherent excitonic effects due to their fully organic nature is discussed and highlight the strategies to regulate excitonic effects for charge- and/or energy-transfer-mediated photocatalysis. Finally, the current challenges and future directions in this field, aiming to provide a comprehensive understanding of how reticular materials can be optimized for enhanced photocatalysis is discussed.

Bioinspired catalytic pocket promotes CO2-to-ethanol photoconversion on colloidal quantum wells

Sluggish surface reaction is a critical factor that strongly governs the efficiency of photocatalytic solar fuel production, particularly in CO2-to-ethanol photoconversion. Here, inspired by the principles underlying enzyme catalytic proficiency and specificity, we report a biomimetic photocatalyst that affords superior CO2-to-ethanol photoreduction efficiency (5.5 millimoles gram-1 hour-1 in average with 98.2% selectivity) distinctly surpassing the state of the art. The key is to create a class of catalytic pocket, which contains spatially organized NH2…Cu-Se(-Zn) multiple functionalities at close range, over ZnSe colloidal quantum wells. Such structure offers a platform to mimic the concerted cooperation between the active site and surrounding secondary/outer coordination spheres in enzyme catalysis. This is manifested by the chemical adsorption and activation of CO2 via a bent geometry, favorable stabilization toward a variety of important intermediates, promotion of multielectron/proton transfer processes, etc. These results highlight the potential of incorporating enzyme-like features into the design of photocatalysts to overcome the challenges in CO2 reduction.

A-Site Doping Promotes CO2 Activation and Prolongs Charge Carrier Lifetimes in SrTiO3: Insight from Quantum Dynamics

Using time-dependent density functional theory and nonadiabatic molecular dynamics, we systematically investigated the effect of A-site doping on the CO2 activation and charge carrier lifetimes in SrTiO3(STO). Our simulations revealed that A-site doping significantly enhances the chemical adsorption of CO2 on SrTiO3 surfaces, which is beneficial for promoting CO2 activation. Moreover, we found that A-site doping can efficiently stabilize the lowest unoccupied molecular orbital (LUMO) of CO2 near the conduction band minimum of STO, promoting the photogenerated electron transfer from the conduction band of STO to the CO2 LUMO. Importantly, A-site doping causes a significant nonadiabatic coupling reduction and prolongs the charge recombination time by a factor of 1.86 compared to the pristine STO. Our study clarifies the influencing mechanism of A-site doping on CO2 activation and charge carrier lifetimes and suggests important principles for the design of high-performance photocatalytic semiconductors.

Boosting Solar-Driven CO2 Conversion to Ethanol via Single-Atom Catalyst with Defected Low-Coordination Cu-N2 Motif

Cu-based catalysts have been shown to selectively catalyze CO2 photoreduction to C2+ solar fuels. However, they still suffer from poor activity and low selectivity. Herein, we report a high-performance carbon nitride supported Cu single-atom catalyst featuring defected low-coordination Cu-N2 motif (Cu-N2-V). Lead many recently reported photocatalysts and its Cu-N3 and Cu-N4 counterparts, Cu-N2-V exhibits superior photocatalytic activity for CO2 reduction to ethanol and delivers 69.8 μmol g-1 h-1 ethanol production rate, 97.8 % electron-based ethanol selectivity, and a yield of ~10 times higher than Cu-N3 and Cu-N4. Revealed by the extensive experimental investigation combined with DFT calculations, the superior photoactivity of Cu-N2-V stems from its defected Cu-N2 configuration, in which the Cu sites are electron enriched and enhance electron delocalization. Importantly, Cu in Cu-N2-V exist in both Cu+ and Cu2+ valence states, although predominantly as Cu+. The Cu+ sites support the CO2 activation, while the co-existence of Cu+/Cu2+ sites are highly conducive for strong *CO adsorption and subsequent *CO-*CO dimerization enabling C-C coupling. Furthermore, the hollow microstructure of the catalyst also promotes light adsorption and charge separation efficiency. Collectively, these make Cu-N2-V an effective and high-performance catalyst for the solar-driven CO2 conversion to ethanol. This study also elucidates the C-C coupling reaction path via *CO-*CO to *COCOH and rate-determining step, and reveals the valence state change of partial Cu species from Cu+ to Cu2+ in Cu-N2-V during CO2 photoreduction reaction.

Catalysis with Two-Dimensional Metal-Organic Frameworks: Synthesis, Characterization, and Modulation

The demand for the exploration of highly active and durable electro/photocatalysts for renewable energy conversion has experienced a significant surge in recent years. Metal-organic frameworks (MOFs), by virtue of their high porosity, large surface area, and modifiable metal centers and ligands, have gained tremendous attention and demonstrated promising prospects in electro/photocatalytic energy conversion. However, the small pore sizes and limited active sites of 3D bulk MOFs hinder their wide applications. Developing 2D MOFs with tailored thickness and large aspect ratio has emerged as an effective approach to meet these challenges, offering a high density of exposed active sites, better mechanical stability, better assembly flexibility, and shorter charge and photoexcited state transfer distances compared to 3D bulk MOFs. In this review, synthesis methods for the most up-to-date 2D MOFs are first overviewed, highlighting their respective advantages and disadvantages. Subsequently, a systematic analysis is conducted on the identification and electronic structure modulation of catalytic active sites in 2D MOFs and their applications in renewable energy conversion, including electrocatalysis and photocatalysis (electro/photocatalysis). Lastly, the current challenges and future development of 2D MOFs toward highly efficient and practical electro/photocatalysis are proposed.

Engineering of Ultra-Thin Layer of MIL-125(Ti) Nanosheet\Zn-Tetracarboxy-Phthalocyanine S-Scheme Heterojunction as Photocatalytic CO2 Reduction Catalyst

Metal-organic frameworks (MOFs) with ultrathin 2D structure have attracted remarkable attention in photocatalytic application owing to the accessibility of abundant active sites on the surface. But high charge recombination results in poor photocatalytic activity. Herein, the synthesis of ultrathin MIL-125(Ti) nanosheets is reported with a thickness of 1.3 nm through a simple chemical reaction route of precursor solution aging and subsequent solvothermal process for photocatalytic CO2 production. The maximal CO evolution rate achieves 200.8 µmol g-1 h-1, which is prominently higher than that (78.6 µmol g-1 h-1) of the bulk MIL-125(Ti) counterpart. Furthermore, the structurally stable Zn (II) tetracarboxy phthalocyanine (ZnTcPc) molecules assembly on ultrathin MIL-125(Ti) nanosheet (NS) to form MIL-125(Ti) NS\ZnTcPc S-scheme heterojunction through the strong interaction between the Ti3+ in MIL-125(Ti) and the COOH in ZnTcPc. The introduction of ZnTcPc greatly extends light absorption range and increases charge separation rate. The experimental and density functional theory calculation results validate that the MIL-125(Ti) NS\ZnTcPc S-scheme heterojunction can favor CO2 adsorption and effectively depress the formation energy of the intermediates, achieving a high CO evolution rate of 450.8 µmol g-1 h-1. This work provides a strategy of engineering 2D MOF-based heterostructure systems for photocatalytic application.

Highly Efficient Iridium-Iron-Molybdenum Catalysts Condensed on Boron Nitride for Biomass-Derived Diols' Hydrogenolysis to Secondary Monoalcohols

A trade-off of activity-selectivity exists in primary C-O hydrogenolysis of biomass-derived diols to secondary alcohols over bimetallic catalysts, especially the combination of noble metal and early transition metal in the metallic state and metal oxide state, respectively. Herein, the combination of high surface concentration of boron nitride (BN)-supported metals and the addition of Mo as third metal broke the trade-off. High yields (>50%) of secondary alcohols were obtained with robust productivity up to 25-fold based on Ir over Ir-Fe0.13-Mo0.08/BN (Ir = 20 wt %, Fe/Ir = 0.13, Mo/Ir = 0.08) than previously reported Ir-Fe catalysts. In contrast, simply increasing the loading amount of Ir-Fe catalysts or the addition of Mo species only enhanced the productivity by <2-4-fold. Various characterizations showed that large Ir loading enables the formation of condensed nanostructures (∼2 nm) on the BN support, which further alloy with Mo and Fe to form an face centred cubic (fcc)-type trimetallic alloy with surface enrichment of Fe. On the other hand, in Ir-Fe0.25-Mo0.08/BN with lower Ir (5 wt %) and lower Ir-based activity, the Mo species were rather bound on the support surface possibly as the MoBx state. These structures were formed by simple impregnation and reduction with H2 at the reaction temperature (453 K). The high activity of Ir-Fe0.13-Mo0.08/BN (20 wt % Ir) is derived from two aspects: (1) the formation of condensed nanostructures (∼2 nm) exposing more active sites and (2) alloying with Mo to modify the electronic state of Ir to enhance the H2 activation ability, as shown by the decreased Ea (82-84 → 67 kJ mol-1).

Fabrication of samarium doped MOF-808 as an efficient photocatalyst for the removal of the drug cefaclor from water

MOFs are emerging photocatalysts designed by tuning organic ligands and metal centers for optimal efficiency. In this study, a samarium decorated MOF-808(Ce) metal organic framework was fabricated by facile hydrothermal synthesis. The synthesized samarium decorated MOF-808(Ce) was characterized by using analytical techniques such as SEM, EDX, XRD and TGA to study its morphological, thermal and structural properties. SEM images showed that MOF-808(Ce) comprised of truncated octahedrons. The morphology of the material was changed upon Sm incorporation. Sm/MOF-808(Ce) exhibited better UV-vis light absorption properties than MOF-808(Ce) as evidenced by its slightly higher band gap value. This material was exploited for the degradation of the drug cefaclor from water. Cefaclor removal followed double a first order in parallel model (DFOP). Under UV light, 97.7% of the cefaclor was removed in only 20 minutes and after 60 minutes this removal efficiency was increased to 99.25%. These features exhibited that samarium decorated MOF has immense potential for the photocatalytic degradation of cefaclor as it generates e- and h+ to enhance the photocatalytic efficiency and it is a promising candidate to treat wastewater without formation of harmful byproducts.

Engineering 0D/2D Architecture of Ni(OH)2 Nanoparticles on Covalent Organic Framework Nanosheets for Selective Visible-Light-Driven CO2 Reduction

Low-dimensional materials serving as photocatalysts favor providing abundant unsaturated active sites and shortening the charge transport distance, but the high surface energy readily causes the aggregation that limits their application. Herein, it is demonstrated that 2D covalent organic framework (COF) TpBD nanosheets are effective in the dispersion and stabilization of 0D Ni(OH)2 . The COF precursor TpBD is synthesized from the Schiff base condensation of 1,3,5-triformylphloroglucinol (Tp) and benzidine (BD) and exfoliated into 2D nanosheets named BDNs via ultrasonication. The formation of highly dispersive 0D Ni(OH)2 on BDNs is reached under a mild weak basic condition, enabling robust active sites for CO2 adsorption/activation and rapid interface cascaded electron transport channels for the accumulation of long-lived photo-generated charges. The champion catalyst 30%Ni-BDNs effectively catalyze the CO2 to CO conversion under visible-light irradiation, offering a high CO evolution rate of 158.4 mmol g-1 h-1 and turnover frequency of 51 h-1 . By contrast, the counterpart photocatalyst, the bulk TpBD stabilized Ni(OH)2 , affords a much lower CO evolution rate and selectivity. This work demonstrates a new avenue to simultaneously construct efficient active sites and electron transport channels by coupling 0D metal hydroxides and 2D COF nanosheets for CO2 photoreduction.

Study on synergistic effects of 4f levels of erbium and black phosphorus/SnNb2O6 heterostructure catalysts by multiple spectroscopic analysis techniques

Lanthanide single atom modified catalysts are rarely reported because the roles of lanthanide in photocatalysis are difficult to explain clearly. Based on the construction of Er single atom modified black phosphorus/SnNb2O6 (BP/SNO) heterojunctions, the synergistic effect of 4f levels of Er and heterostructures was studied by combining steady-state, transient, and ultrafast spectral analysis techniques with DFT theoretical calculations. According to the Judd-Ofelt theory of lanthanide ions, the CO2 photoreduction test under single wavelength excitation verifies that the 4F7/2/2H11/2 → 4I15/2 emissions of Er in BPEr/SNOEr can be more easily absorbed by SNO and BP, further proving the role of the 4f levels. As a result, the CO and CH4 yields of BPEr/SNOEr-10 under visible light irradiation are 10.7 and 10.1 times higher than those of pure BP, respectively, and 3.4 and 1.5 times higher than those of SNO. The results of DFT calculations show that the Er single atoms can cause surface reconstruction, regulate the active sites of BP, and reduce the energy change value in the key steps (CO2* + H+ + e- → COOH* and COOH* → CO* + H2O). This work provides novel insights into the design of lanthanide single atom photocatalysts for CO2 reduction.

Nitrogen vacancy-induced spin polarization of ultrathin zinc porphyrin nanosheets for efficient photocatalytic CO2 reduction

Metalloporphyrin compounds have excellent electron transfer and visible light absorption ability, demonstrating broad application prospects in the field of photocatalysis. In this work, the nitrogen vacancies (NVs) were successfully introduced into zinc porphyrin (ZnTCPP) ultrathin nanosheets through surface N2 plasma treatment, which is environmentally friendly and can react in low temperatures. Furthermore, the prepared nitrogen vacancies-zinc porphyrin (NVs-ZnTCPP) materials exhibited excellent photocatalytic CO2 reduction activity and selectivity, specifically, the CO production rate of ZnTCPP-1 (N2 plasma treatment, 1 min) achieved as high as 12.5 µmol g-1h-1, which is about 2.7 times greater than that of untreated ZnTCPP. Based on the experimental and density functional theory calculation (DFT) results, it is found that the promoted photocatalytic performance of NVs-ZnTCPP could be mainly attributed to nitrogen vacancy-induced spin polarization by reducing the reaction barriers and inhibiting the recombination of photoexcited carriers. This work provides a new perspective for the construction of vacancy-based metalloporphyrin, and further explores the intrinsic mechanism between the electron spin property and the performance of the photocatalyst.

Sub-1 nm Cu2O Nanosheets for the Electrochemical CO2 Reduction and Valence State-Activity Relationship

The copper-based (Cu-based) electrocatalytic materials effectively carry out the electrocatalytic carbon dioxide reduction reaction (CO2RR) toward C2+ products, yet the superiority and stability of the oxidation state of Cu are still worth studying. Herein, we designed and prepared three Cu-based electrocatalysts with different oxidation states to study the valence state-activity relationship. Among these Cu-based electrocatalysts, the Cu2O nanosheets with thickness of only 0.9 nm show an extremely high C2+ Faraday efficiency (FEC2+) of ∼81%, and the FEC2+ has an increase of 37% compared with the traditional CuOx phase. The ultrathin two-dimensional (2D) nanosheet structure with abundant oxygen vacancies can stabilize the oxidation state of Cu to improve the selectivity for C2+ products in CO2RR. In situ Raman spectroscopy and density functional theory calculations demonstrate that the rich Cu+ in the ultrathin 2D Cu2O nanosheets is the most suitable oxidation state for *CO adsorption and coverage on the catalyst surface, which promotes the C-C coupling reaction in CO2RR. This work provides an excellent catalyst for CO2RR toward C2+ products.

Guest-Induced Multilevel Charge Transport Strategy for Developing Metal-Organic Frameworks to Boost Photocatalytic CO2 Reduction

Encapsulating photogenerated charge-hopping nodes and space transport bridges within metal-organic frameworks (MOFs) is a promising method of boosting the photocatalytic performance. Herein, this work embeds electron transfer media (9,10-bis(4-pyridyl)anthracene (BPAN)) in MOF cavities to build multi-level electron transfer paths. The MOF cavities are accurately regulated to investigate the significance of the multi-level electron transfer paths in the process of CO2 photoreduction by evaluating the difference in the number of guest media. The prepared MOFs, {[Co(BPAN)(1,4-dicarboxybenzene)(H2 O)2 ]·BPAN·2H2 O} and {[Co(BPAN)2 (4,4'-biphenyldicarboxylic acid)2 (H2 O)2 ]·2BPAN·2H2 O} (denoted as BPAN-Co-1 and BPAN-Co-2), exhibit efficient visible-light-driven CO2 conversion properties. The CO photoreduction efficacy of BPAN-Co-2 (5598 µmol g-1  h-1 ) is superior to that of most reported MOF-based catalysts. In addition, the enhanced CO2 photoreduction ability is supported by density functional theory (DFT). This work illustrates the feasibility of realizing charge separation characteristics in MOF catalysts at the molecular level, and provides new insight for designing high-performance MOFs for artificial photosynthesis.

Photocatalytic Synthesis of Ammonia from Pinecone Graphite-Phase Carbon Nitride Loaded with MoS2 Nanosheets as Co-catalysts

Photocatalytic nitrogen fixation is a promising alternative to the Haber-Bosch process to alleviate the energy and environmental crises. Here, we designed a pinecone-shaped graphite-phase carbon nitride (PCN) catalyst supported with MoS₂ nanosheets by a supramolecular self-assembly method. The catalyst shows an excellent photocatalytic nitrogen reduction reaction (PNRR) due to the larger specific surface area and the enhancement of visible light owing to the reduced band gap. Under simulated sunlight, the sample of PCN loaded with 5 wt % MoS₂ nanosheets (MS5%/PCN) shows a PNRR efficiency of 279.41 μmol g^-1 h^-1, which is 14.9 times that of bulk graphite-phase carbon nitride (g-C₃N₄), 4.6 times that of PCN, and 5.4 times that of MoS₂, respectively. The unique pinecone-like structure of MS5%/PCN not only improves the ability of light absorption but also assists in the uniform loading of MoS₂ nanosheets. Likewise, the existence of MoS₂ nanosheets improves the light absorption ability of the catalyst and reduces the impedance of the catalyst. Furthermore, as a co-catalyst, MoS₂ nanosheets can efficiently adsorb nitrogen (N₂) and serve as active N₂ reduction sites. From the perspective of structural design, this work can offer novel solutions for the creation of effective N₂-fixing photocatalysts.

Assembling CeO2 nanoparticles on ZIF-8 via the hydrothermal method to promote the CO2 photoreduction performance

Photocatalytic reduction of CO₂ to valuable carbon fuel is a prospective technique to decrease CO₂ emissions and simultaneously generate efficient chemical energy. In this paper, a novel high-efficiency photocatalyst ZIF-8@CeO₂ heterogeneous composite (ZIF = zeolitic imidazolate framework) was prepared by the hydrothermal method, where CeO₂ nanospheres were uniformly grown on the surface of ZIF-8. Compared to pristine ZIF-8 or CeO₂ nanoparticles (NPs), the ZIF-8@CeO₂ composite shows significantly better efficiency in the reduction of CO₂ into CO and CH₄ under light irradiation, that is the CO evolution rate can reach 465.01 μmol g^-1 h^-1 and the CH₄ evolution rate can reach 181.27 μmol g^-1 h^-1. Analyses indicated that the addition of CeO₂ in the composites will expand the photoresponse region; the formation of the ZIF-8/CeO₂ heterojunction significantly promoted the separation of photogenerated electron-hole pairs within the composite. This work provided an effective method to further improve the catalytic activity of ZIF-based materials, which paved a new way for eco-friendly conversion of carbon dioxide into clean fuels and they could also have huge potential for application in energy and environmental science.

Piezocatalytic Techniques in Environmental Remediation

As a consequence of rapid industrialization throughout the world, various environmental pollutants have begun to accumulate in water, air, and soil. This endangers the ecological environment of the earth, and environmental remediation has become an immediate priority. Among various environmental remediation techniques, piezocatalytic techniques, which uniquely take advantage of the piezoelectric effect, have attracted much attention. Piezoelectric effects allow pollutant degradation directly, while also enhancing photocatalysis by reducing the recombination of photogenerated carriers. In this Review, we provide a comprehensive summary of recent developments in piezocatalytic techniques for environmental remediation. The origin of the piezoelectric effect as well as classification of piezoelectric materials and their application in environmental remediation are systematically summarized. We also analyze the potential underlying mechanisms. Finally, urgent problems and the future development of piezocatalytic techniques are discussed.

Ni-Co Bimetallic Hydroxide Nanosheet Arrays Anchored on Graphene for Adsorption-Induced Enhanced Photocatalytic CO2 Reduction

Photocatalytic CO₂ reduction can be implemented to use CO₂ , a greenhouse gas, as a resource in an energy-saving and environmentally friendly way, in which suitable catalytic materials are required to achieve high-efficiency catalysis. Insufficient accessible active sites on the catalyst surface and inhibited electron transfer severely limit the photocatalytic performance. Therefore, porous aerogels are constructed from composites comprising different ratios of Ni-Co bimetallic hydroxide (Ni_x Co_y ) grown on reduced graphene oxide (GR) into a hierarchical nanosheet-array structure using a facile in situ growth method. Detailed characterization shows that this structure exposes numerous active sites for enhanced adsorption-induced photocatalytic CO₂ reduction. Moreover, under the synergistic effect of Ni-Co bimetallic hydroxide, the CO₂ adsorption capacity as well as charge-carrier separation and transfer are excellent. As a result, the Ni₇ Co₃ -GR catalyst exhibits highly improved catalytic performance when compared with recently reported values, with a high CO release rate of 941.5 µmol h^-1  g^-1 and a selectivity of 96.3% during the photocatalytic reduction of CO₂ . This work demonstrates a new strategy for designing nanocomposites with abundant active sites structures.