Ordered Mesoporous Metal Carbides with Enhanced Anisole Hydrodeoxygenation Selectivity

Dehydrogenation and dehydration of formic acid over orthorhombic molybdenum carbide

•

Formic acid (HCOOH) adsorption on β-Mo₂C is exothermic and favours a configuration parallel to the surface.

•

Once adsorbed, thermodynamics favour cleavage of the H—COOH bond to form CO.

•

CO bonds strongly to the surface, potentially poisoning the catalyst.

•

Therefore, kinetics favour dehydrogenation mechanism with CO₂ continuously formed.

The dehydrogenation and dehydration of formic acid is investigated on the β-Mo₂C (100) catalyst surface using time independent density functional theory. The energetics of the two mechanisms are calculated, and the thermochemistry and kinetics are discussed using the transition state theory. Subsequently, microkinetic modelling of the system is conducted, considering the batch reactor model. The potential energy landscape of the reaction shows a thermodynamically favourable cleavage of H—COOH to form CO; however, the kinetics show that the dehydrogenation mechanism is faster and CO₂ is continuously formed. The effect of HCOOH adsorption on the surface is also analysed, in a temperature-programmed desorption, with the conversion proceeding at under 350 K and desorption of CO₂ is observed with a selectivity of about 100 %, in line with the experimental reports.

Elucidating the Active Site and the Role of Alkali Metals in Selective Hydrodeoxygenation of Phenols over Iron-Carbide-based Catalyst

Iron-carbide-based catalysts have been explored in the selective hydrodeoxygenation (HDO) of phenol, aiming at elucidating the role of active site and alkali metal. Complementary characterization such as X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and scanning transmission electron microscopy coupled with electron energy loss spectroscopy, together with catalytic evaluations revealed a rapid structural reconstruction of iron carbide (Fe₃ C) catalysts, leading to a stable defective graphene-covered metallic Fe active phase (G@Fe) under reaction conditions. Further studies using different alkali metals (i. e., Na, K, and Cs) revealed that alkali metals showed negligible effect on the phase transformation of Fe₃ C. However, the reconstructed G@Fe doped with alkali metals inhibited the tautomerization, a facile reaction pathway to saturation of the aromatic ring, leading to enhanced selectivity to arene. The extent of inhibition of tautomerization or selectivity to arene was closely related to the degree of electron donation of alkali metal to Fe.

An Overview of Recent Advances in the Synthesis and Applications of the Transition Metal Carbide Nanomaterials

Good stability and reproducibility are important factors in determining the place of any material in their respective field and these two factors also enable them to use in various applications. At present, transition metal carbides (TMCs) have high demand either in the two-dimensional (2D) form (MXene) or as nanocomposites, nanoparticles, carbide films, carbide nano-powder, and carbide nanofibers. They have shown good stability at high temperatures in different environments and also have the ability to show adequate reproducibility. Metal carbides have shown a broad spectrum of properties enabling them to engage the modern approach of multifacet material. Several ways have been routed to synthesize metal carbides in their various forms but few of those gain more attention due to their easy approach and better properties. TMCs find applications in various fields, such as catalysts, absorbents, bio-sensors, pesticides, electrogenerated chemiluminescence (ECL), anti-pollution and anti-bacterial agents, and in tumor detection. This article highlights some recent developments in the synthesis methods and applications of TMCs in various fields.

Palladium-Incorporated α-MoC Mesoporous Composites for Enhanced Direct Hydrodeoxygenation of Anisole

Hydrodeoxygenation (HDO) is one of the promising catalytic routes for converting biomass derived molecules to high value products. A key step of HDO is the cleavage of an aromatic C–O bond to accomplish the deoxygenation step, however, which is energetically unfavorable. Herein, we report a series of palladium (Pd)-incorporated α-phase of molybdenum carbide (α-MoC) mesoporous composites for enhanced HDO activity of a biomass model molecule, anisole. The catalysts, x%Pd/α-MoC (x% is the molar ratio of Pd/Mo), were investigated by X-ray diffraction (XRD), temperature programmed reduction (TPR), temperature programmed desorption (TPD), Brunauer–Emmett–Teller (BET), Raman, transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) techniques. Pd is highly dispersed on α-MoC when x% ≤ 1%, but aggregate to form nanoparticles when x% = 5%. The x%Pd/α-MoC catalysts (x% ≤ 1%) show enhanced HDO activity in terms of turnover frequency (TOF) and apparent activation energy barrier (Ea) compared with α-MoC and β-Mo2C catalysts. The TOF of 1%Pd/α-MoC catalyst at 160 °C is 0.115 h−1 and the Ea is 48.2 kJ/mol. Moreover, the direct cleavage of aromatic C–O bond is preferred on 1%Pd/α-MoC catalyst. The enhanced HDO activity is attributed to superior H2 dissociation ability by the highly dispersed Pd sites on carbide. This work brings new insights for rational design of the catalyst for selective C–O bond activation.

Stable and Antisintering Tungsten Carbides with Controllable Active Phase for Selective Cleavage of Aryl Ether C-O Bonds

Transition-metal carbides are important materials in heterogeneous catalysis. It remains challenging yet attractive in nanoscience to construct the active phase of carbide catalysts in a controllable manner and keep a sintering-resistant property in redox reactions, especially hydroprocessing. In this work, an integrated strategy was presented to synthesize stable and well-defined tungsten carbide nanoparticles (NPs) by assembling the metal precursor onto carbon nanotubes (CNTs), wrapping a thin polymeric layer, and following a controlled carburization. The polymer served as a soft carbon source to modulate the metal/carbon ratio in the carbides and introduced amorphous carbons around the carbides to prevent the NPs from sintering. The as-built p-W_xC/CNT displayed high stability in the hydrogenolysis of aryl ether C-O bond in guaiacol for more than 150 h. Its activity was more than two and six times higher than those prepared via typical temperature-programmed reduction with gaseous carbon (W_xC/CNT-TPR) and carbothermal reduction with intrinsic carbon support (W_xC/CNT-CTR), respectively. Our p-W_xC/CNT catalyst also achieved high efficiency for selective cleavage of the aryl ether C-O bonds in lignin-derived aromatic ethers, including anisole, dimethoxylphenol, and diphenyl ether, with a robust lifespan.

Efficient Conversion of Pine Wood Lignin to Phenol

Obtaining chemical building blocks from biomass is attractive for meeting sustainability targets. Herein, an effective approach was developed to convert the lignin part of woody biomass into phenol, which is a valuable base chemical. Monomeric alkylmethoxyphenols were obtained from pinewood, rich in guaiacol-type lignin, through Pt/C-catalyzed reductive depolymerization. In a second step, an optimized MoP/SiO2 catalyst was used to selectively remove methoxy groups in these lignin monomers to generate 4-alkylphenols, which were then dealkylated by zeolite-catalyzed transalkylation to a benzene stream. The overall yield of phenol based on the initial lignin content in pinewood was 9.6 mol %.

Recent advances in amphiphilic block copolymer templated mesoporous metal-based materials: assembly engineering and applications

Mesoporous metal-based materials (MMBMs) have received unprecedented attention in catalysis, sensing, and energy storage and conversion owing to their unique electronic structures, uniform mesopore size and high specific surface area. In the last decade, great progress has been made in the design and application of MMBMs; in particular, many novel assembly engineering methods and strategies based on amphiphilic block copolymers as structure-directing agents have also been developed for the "bottom-up" construction of a variety of MMBMs. Development of MMBMs is therefore of significant importance from both academic and practical points of view. In this review, we provide a systematic elaboration of the molecular assembly methods and strategies for MMBMs, such as tuning the driving force between amphiphilic block copolymers and various precursors (i.e., metal salts, nanoparticles/clusters and polyoxometalates) for pore characteristics and physicochemical properties. The structure-performance relationship of MMBMs (e.g., pore size, surface area, crystallinity and crystal structure) based on various spectroscopy analysis techniques and density functional theory (DFT) calculation is discussed and the influence of the surface/interfacial properties of MMBMs (e.g., active surfaces, heterojunctions, binding sites and acid-base properties) in various applications is also included. The prospect of accurately designing functional mesoporous materials and future research directions in the field of MMBMs is pointed out in this review, and it will open a new avenue for the inorganic-organic assembly in various fields.

Hydrodeoxygenation of anisole to benzene over an Fe2P catalyst by a direct deoxygenation pathway

Fe₂P catalyst was highly selective for the cleavage of C–O bond of anisole via direct deoxygenation pathway.

Ru nanoclusters confined in porous organic cages for catalytic hydrolysis of ammonia borane and tandem hydrogenation reaction

The fabrication of narrow-sized metal nanoclusters for heterogeneous catalysis has attracted widespread research attention. Nevertheless, it is still a significant challenge to fabricate highly dispersed metal-nanocluster-based catalysts with high activity and stability. In this study, 1,3,5-benzenetricarboxylate and 1,2-diaminocyclohexane were used as precursors to fabricate porous organic cages (POCs), CC3-R. CC3-R exhibited a high specific surface area and a microporous-mesoporous structure. In addition, ultrafine Ru nanoclusters were successfully encapsulated in CC3-R with high dispersion via impregnation and subsequent reduction, affording Ru nanoclusters with a precisely controlled size of ∼0.65 nm. As-obtained Ru(1.45%)@CC3-R exhibited significantly enhanced catalytic activities toward the hydrolysis of ammonia borane (AB) and exhibited high conversion and selectivity for the tandem hydrogenation of nitroarenes and hydrogenation of quinoline in water under mild conditions. In addition, the Ru(1.45%)@CC3-R catalyst exhibited high stability and good recyclability. This study should provide a novel strategy for fabricating highly dispersed ultrafine nanocluster-based catalysts for various catalysis applications.

Performance of a Ni-Cu-Co/Al2O3 Catalyst on in-situ Hydrodeoxygenation of Bio-derived Phenol

The in-situ hydrodeoxygenation of bio-derived phenol is an attractive routine for upgrading bio-oils. Herein, an active trimetallic Ni-Cu-Co/Al2O3 catalyst was prepared and applied in the in-situ hydrodeoxygenation of bio-derived phenol. Comparison with the monometallic Ni/Al2O3 catalyst and the bimetallic Ni-Co/Al2O3 and Ni-Cu/Al2O3 catalysts, the Ni-Cu-Co/Al2O3 catalyst exhibited the highest catalytic activity because of the formation of Ni-Cu-Co alloy on the catalyst characterized by using X-ray powder diffraction (XRD), temperature programmed reduction (TPR), N2 physisorption, scanning electron microscope (SEM), and transmission electron microscope (TEM). The phenol conversion of 100% and the cyclohexane yield of 98.3% could be achieved in the in-situ hydrodeoxygenation of phenol at 240 °C and 4 MPa N2 for 6 h. The synergistic effects of Ni with Cu and Co of the trimetallic Ni-Cu-Co/Al2O3 catalyst played a significant role in the in-situ hydrodeoxygenation process of phenol, which not only had a positive effect on the production of hydrogen but also owned an excellent hydrogenolysis activity to accelerate the conversion of cyclohexanol to cyclohexane. Furthermore, the catalyst also exhibited excellent recyclability and good potential for the upgrading of bio-oils.

Investigation of the effects of phosphorus on the selective hydrodeoxygenation of anisole over an Fe/SiO2 catalyst

Hydrodeoxygenation (HDO) of lignin derivatives offers an effective approach to produce aromatics.

Synergistic effect of Mo–W carbides on selective hydrodeoxygenation of guaiacol to oxygen-free aromatic hydrocarbons

Mo–W carbide was synthesized via temperature-programmed reduction to generate a β-Mo₂C phase with bulk morphology.

Controllable Synthesis of Ordered Mesoporous Mo2C@Graphitic Carbon Core-Shell Nanowire Arrays for Efficient Electrocatalytic Hydrogen Evolution

Mo₂C is a possible substitute to Pt-group metals for electrocatalytic hydrogen evolution reaction (HER). Both support-free and carbon-supported Mo₂C nanomaterials with improved HER performance have been developed. Herein, distinct from prior research, novel ordered mesoporous core-shell nanowires with Mo₂C cores and ultrathin graphitic carbon (GC) shells are rationally synthesized and demonstrated to be excellent for HER. The synthesis is fulfilled via a hard-templating approach combining in situ carburization and localized carbon deposition. Phosphomolybdic acid confined in the SBA-15 template is first converted to MoO₂, which is then in situ carburized to Mo₂C nanowires with abundant surface defects. Simultaneously, GC layer (the thickness is down to ∼1.0 nm in most areas) is controlled to be locally deposited on the Mo₂C surface because of its strong affinity with carbon and catalytic effect on graphitization. Removal of the template results in the Mo₂C@GC core-shell nanowire arrays with the structural properties well-characterized. They exhibit excellent performance for HER with a low overpotential of 125 mV at 10 mA cm^-2, a small Tafel slope of 66 mV dec^-1, and an excellent stability in acidic electrolytes. The influences of several factors, especially the spatial configuration and relative contents of the GC and Mo₂C components, on HER performance are elucidated with control experiments. The excellent HER performance of the mesoporous Mo₂C@GC core-shell nanowire arrays originates from the rough Mo₂C nanowires with diverse active sites and short charge-transfer paths and the ultrathin GC shells with improved surface area, electronic conductivity, and stabilizing effect on Mo₂C.

Acetic acid hydrodeoxygenation on molybdenum carbide catalysts

Kinetics and site requirements of acetic acid hydrodeoxygenation on molybdenum carbide – a stable and selective catalyst under atmospheric hydrogen pressure.

Synthesis of Nanoporous Metals, Oxides, Carbides, and Sulfides: Beyond Nanocasting

Nanoporous metal-based solids are of particular interest because they combine a large quantity of surface metal sites, interconnected porous networks, and nanosized crystalline walls, thus exhibiting unique physical and chemical properties compared to other nanostructures and bulk counterparts. Among all of the synthetic approaches, nanocasting has proven to be a highly effective method for the syntheses of metal oxides with three-dimensionally ordered porous structures and crystalline walls. A typical procedure involves a thermal annealing process of a porous silica template filled with an inorganic precursor (often a metal nitrate salt), which converts the precursor into a desired phase within the silica pores. The final step is the selective removal of the silica template in either a strong base or a hydrofluoric acid solution. In the past decade, nanocasting has become a popular synthetic approach and has enabled the syntheses of a variety of nanoporous metal oxides. However, there is still a lack of synthetic methods to fabricate nanoporous materials beyond simple metal oxides. Therefore, the development of new synthetic strategies beyond nanocasting has become an important direction. This Account describes new progress in the preparation of novel nanoporous metal-based solids for heterogeneous catalysis. The discussion begins with a method called dealloying, an effective method to synthesize nanoporous metals. The starting material is a metallic alloy containing two or more elements followed by a selective chemical or electrochemical leaching process that removes one of the preferential elements, resulting in a highly porous structure. Nanoporous metals, such as Cu, Ag, and CuTi, exhibit remarkable electrocatalytic properties in carbon dioxide reduction, oxygen reduction, and hydrogen evolution reactions. In addition, the syntheses of metal oxides with hierarchical porous structures are also discussed. On the basis of the choice of hard template, nanoporous metal oxides with bimodal pore size distributions can be obtained. Combining nanocasting with chemical etching, a cobalt oxide with a hierarchical porous structure was synthesized, which possessed a surface area up to 250 m(2) g(-1), representing the highest surface area reported to date for nanoporous cobalt oxides. Lastly, this Account also covers the syntheses of nanoporous metal carbides and sulfides. The combination of in situ carburization and nanocasting enabled the syntheses of two ordered nanoporous metal carbides, Mo2C and W2C. For nanoporous metal sulfides, an "oxide-to-sulfide" synthetic strategy was proposed to address the large volume change issue of converting metal nitrate precursors to metal sulfide products in nanocasting. The successful syntheses of ordered nanoporous FeS2, CoS2, and NiS2 demonstrated the feasibility of the "oxide-to-sulfide" method. Concluding remarks include a summary of recent advances in the syntheses of nanoporous metal-based solids and a brief discussion of future opportunities in the hope of stimulating new interests and ideas.