The Structure of the Cu–CuO Sites Determines the Catalytic Activity of Cu Nanoparticles

A suitably fabricated ternary nanocomposite (Cu-CuO@rGO-SiO2) as a sustainable and common heterogeneous catalyst for C-S, C-O and C-N coupling reactions

A hybrid composite based on π-electron rich reduced graphene oxide (rGO) and mesoporous silica (SiO2) was prepared and decorated with copper species to afford a ternary nanocomposite material (Cu-CuO@rGO-SiO2). This copper-based nanocomposite was successfully used as a robust and multi-tasking heterogeneous catalyst for most common cross-coupling reactions (e.g. C-S, C-O and C-N coupling). A broad range of catalytic activities are believed to be originated from the synergism of different co-existing copper species (Cu(0) and CuO) and facile charge transfer from the metal ions towards rGO-SiO2 matrices, as established from XPS and other studies.

Lattice oxygen self-spillover on reducible oxide supported metal cluster: the water-gas shift reaction on Cu/CeO2 catalyst

In this work we have tackled one of the most challenging problems in nanocatalysis namely understanding the role of reducible oxide supports in metal catalyzed reactions. As a prototypical example, the very well-studied water gas shift reaction catalyzed by CeO2 supported Cu nanoclusters is chosen to probe how the reducible oxide support modifies the catalyst structures, catalytically active sites and even the reaction mechanisms. By employing density functional theory calculations in conjunction with a genetic algorithm and ab initio molecular dynamics simulations, we have identified an unprecedented spillover of the surface lattice oxygen from the ceria support to the Cu cluster, which is rarely considered previously but may widely exist in oxide supported metal catalysts under realistic conditions. The oxygen spillover causes a highly energetic preference of the monolayered configuration of the supported Cu nanocluster, compared to multilayered configurations. Due to the strong metal-oxide interaction, after the O spillover the monolayered cluster is highly oxidized by transferring electrons to the Ce 4f orbitals. The water-gas-shift reaction is further found to more favorably take place on the supported copper monolayer than the copper-ceria periphery, where the on-site oxygen and the adjacent oxidized Cu sites account for the catalytically active sites, synergistically facilitating the water dissociation and the carboxyl formation. The present work provides mechanistic insights into the strong metal-support interaction and its role in catalytic reactions, which may pave a way towards the rational design of metal-oxide catalysts with promising stability, dispersion and catalytic activity.

Metal-incorporated mesoporous oxides: Synthesis and applications

Mesoporous oxides are outstanding metal nanoparticle catalyst supports owing to their well-defined porous structures. Such mesoporous architectures not only prevent the aggregation of metal nanoparticles but also enhance their catalytic performance. Metal/metal oxide heterojunctions exhibit unique chemical and physical properties because of the surface reconstruction around the junction and electron transfer/interaction across the interface. This article reviews the methods used for synthesizing metal-supported hybrid nanostructures and their applications as catalysts for environmental remediation and sensors for detecting hazardous materials.

Toward development of single-atom ceramic catalysts for selective catalytic reduction of NO with NH3

Insertion of transition metal species into crystalline alumina at low temperatures is proposed to achieve the dispersion of these species at atomic level paired with exceptional textural properties. Precisely, MeAl₂O₄/γ-Al₂O₃ (Me = Mn, Fe, Co, Ni, and/or Cu) nanostructured ceramic catalysts were fabricated with ultra large mesopores (16-30 nm), and high specific surface area (180-290 m² g^-1) and pore volume (1.1-1.6 cm³ g^-1). These ceramics were applied as efficient catalysts for the selective catalytic reduction (SCR) of NO with NH₃, and their selectivity was discussed in terms of N₂O formation, an undesirable byproduct. The catalysts containing Fe, Cu, or Mn showed the highest activities, however, within different temperature ranges. Further tuning of the catalytic activity and selectivity was achieved by creating ceramic catalysts with mixed compositions, e.g., CuFe and MnFe. Upon insertion of the transition metal species into crystalline structure of alumina to maximize atom efficiency, the N₂O formation profile did not change significantly for all metal aluminates except MnAl₂O₄, indicating that these catalysts are suitable for SCR and selectively promote the reduction of NO.

Electrocatalytic CO2 Reduction over Cu3P Nanoparticles Generated via a Molecular Precursor Route

The design of nanoparticles (NPs) with tailored morphologies and finely tuned electronic and physical properties has become a key strategy for controlling selectivity and improving conversion efficiency in a variety of important electrocatalytic transformations. Transition metal phosphide NPs, in particular, have emerged as a versatile class of catalytic materials due to their multifunctional active sites and composition- and phase-dependent properties. Access to targeted transition metal phosphide NPs with controlled features is necessary to tune the catalytic activity. To this end, we have established a solution-synthesis route utilizing a molecular precursor containing M-P bonds to generate solid metal phosphide NPs with controlled stoichiometry and morphology. We expand here the application of molecular precursors in metal phosphide NP synthesis to include the preparation of phase-pure Cu3P NPs from the thermal decomposition of [Cu(H)(PPh3)]6. The mechanism of [Cu(H)(PPh3)]6 decomposition and subsequent formation of Cu3P was investigated through modification of the reaction parameters. Identification and optimization of the critical reaction parameters (i.e., time, temperature, and oleylamine concentration) enabled the synthesis of phase-pure 9-11 nm Cu3P NPs. To probe the multifunctionality of this materials system, Cu3P NPs were investigated as an electrocatalyst for CO2 reduction. At low overpotential (-0.30 V versus RHE) in 0.1 M KHCO3 electrolyte, Cu3P-modified carbon paper electrodes produced formate (HCOO-) at a maximum Faradaic efficiency of 8%.

Sub 1 nm Poly(acrylic acid)-Capped Copper Nanoparticles for the Synthesis of 1,2,3-Triazole Compounds

The stable, water-soluble, and fluorescent sub 1 nm sized poly(acrylic acid)-capped copper nanoparticles (PAACC NPs) were synthesized using a high-intensity ultrasound sonication (30 KHz) method. The reduction of copper NPs from copper(II) salt by mild reducing agent l-ascorbic acid in an aqueous medium was achieved in the presence of poly(acrylic acid). The PAACC NPs were characterized by DRS UV-visible, XPS, PL, FESEM, and HRTEM techniques. The resulting PAACC NPs show orange fluorescence with a peaking center at 560 nm. The PAACC NPs serve as effective catalysts for the synthesis of 1,2,3-triazoles via click reaction in good yields under mild reaction conditions.

Nanoassemblies of ultrasmall clusters with remarkable activity in carbon dioxide conversion into C1 fuels

Cu nanoassemblies formed transiently during reaction from size-selected subnanometer Cu4 clusters supported on amorphous OH-terminated alumina convert CO2 into methanol and hydrocarbons under near-atmospheric pressure at rates considerably higher than those of individually standing Cu4 clusters. An in situ characterization reveals that the clusters self-assemble into 2D nanoassemblies at higher temperatures which then disintegrate upon cooling down to room temperature. DFT calculations postulate a formation mechanism of these nanoassemblies by hydrogen-bond bridges between the clusters and H2O molecules, which keep the building blocks together while preventing their coalescence.

Ethanol dehydrogenative reactions catalyzed by copper supported on porous Al–Mg mixed oxides

Mixed aluminum and magnesium oxides (AlMgO) prepared by means of an emulsion-mediated sol–gel method was impregnated with copper species and used in the ethanol dehydrogenative reactions to produce acetaldehyde and ethyl acetate.

MOF-Derived Cu@Cu₂O Nanocatalyst for Oxygen Reduction Reaction and Cycloaddition Reaction

Research on the synthesis of nanomaterials using metal-organic frameworks (MOFs), which are characterized by multi-functionality and porosity, as precursors have been accomplished through various synthetic approaches. In this study, copper and copper oxide nanoparticles were fabricated within 30 min by a simple and rapid method involving the reduction of a copper(II)-containing MOF with sodium borohydride solution at room temperature. The obtained nanoparticles consist of a copper core and a copper oxide shell exhibited catalytic activity in the oxygen reduction reaction. The as-synthesized Cu@Cu₂O core-shell nanocatalyst exhibited an enhanced limit current density as well as onset potential in the electrocatalytic oxygen reduction reaction (ORR). Moreover, the nanoparticles exhibited good catalytic activity in the Huisgen cycloaddition of various substituted azides and alkynes under mild reaction conditions.

Effects of the Fe/Ce ratio on the activity of CuO/CeO2–Fe2O3 catalysts for NO reduction by CO

Copper catalysts on Fe-loaded ceria were studied for NO reduction by CO.