Catalytic Hydrogenolysis of Lignins into Phenolic Compounds over Carbon Nanotube Supported Molybdenum Oxide

Efficient conversion of lignin fractions in lignocellulose using multifunctional polyoxometalate catalysts

The efficient catalytic conversion of lignin represents a critical challenge in biomass valorization, primarily due to the inherent difficulty in selectively depolymerizing lignin while maintaining the structural integrity of cellulose and hemicellulose. Herein, we present an innovative approach involving the synthesis of ionic liquid polyoxometalate (IL-POM) catalysts, which integrate both redox-active and Lewis acid sites, and are further modified with a choline chloride monomer. Among the synthesized catalysts, ChH4PMo11Al0.5V0.5O40 demonstrated exceptional catalytic performance, achieving an aromatic compound yield of 16.35 % under optimized conditions. Comprehensive characterization of the catalyst revealed that its catalytic efficacy is intrinsically linked to its acidity profile, with the synergistic interplay between Brønsted and Lewis acids facilitating the cleavage of CC and CO bonds. Notably, the incorporation of choline chloride was found to be pivotal in ensuring the catalyst's recyclability. This study underscores the potential of multifunctional IL-POM catalysts in advancing biomass valorization, providing a promising pathway to bridge the gap between homogeneous and heterogeneous catalysis for sustainable biomass conversion.

Chemistry of lignin and condensed tannins as aromatic biopolymers

Aromatic biopolymers are the second largest group of biopolymers after polysaccharides. Depolymerization of aromatic biopolymers, as cheap and renewable substitutes for fossil-based resources, has been used in the preparation of biofuels, and a range of aromatic and aliphatic small molecules. Additionally, these polymers exhibit a robust UV-shielding function due to the high content of aromatic groups. Meanwhile, the abundance of phenolic groups in their structures gives these compounds outstanding antioxidant capabilities, making them well-suited for a diverse array of anti-UV and medical applications. Nevertheless, these biopolymers possess inherent drawbacks in their pristine states, such as rigid structure, low solubility, and lack of desired functionalities, which hinder their complete exploitation across diverse sectors. Thus, the modification and functionalization of aromatic biopolymers are essential to provide them with specific functionalities and features needed for particular applications. Aromatic biopolymers include lignins, tannins, melanins, and humic acids. The objective of this review is to offer a thorough reference for assessing the chemistry and functionalization of lignins and condensed tannins. Lignins represent the largest and most prominent category of aromatic biopolymers, typically distinguishable as either softwood-derived or hardwood-derived lignins. Besides, condensed tannins are the most investigated group of the tannin family. The electron-rich aromatic rings, aliphatic hydroxyl groups, and phenolic groups are the main functional groups in the structure of lignins and condensed tannins. Methoxy groups are also abundant in lignins. Each group displays varying chemical reactivity within these biopolymers. Therefore, the selective and specific functionalization of lignins and condensed tannins can be achieved by understanding the chemistry behavior of these functional groups. Targeted applications include biomedicine, monomers and surface active agents for sustainable plastics.

Catalytic Hydrogenolysis of Lignin into Serviceable Products

ConspectusLignin, a major component of lignocellulosic biomass, accounts for nearly 30% of organic carbon on Earth, making it the most abundant renewable source of aromatic carbon. The valorization of lignin beyond low-value heat and power has been one of the foremost challenges for a long time. On the other hand, aromatic compounds, constituting a substantial segment of the chemical industry and projected to reach a market value of $382 billion by 2030, are predominantly derived from fossil resources, contributing to increased CO2 emissions. Integrating lignin into the aromatic chemical supply chain will offer a promising strategy to reduce the carbon footprint and boost the economic viability of biorefineries. Thus, depolymerizing lignin biopolymers into aromatic chemicals suitable for downstream processing is an important starting point for its valorization. However, owing to lignin's complexity and heterogeneity, achieving efficient and selective depolymerization that yields desirable, isolable aromatic monomers remains a significant scientific challenge.The structure of lignins varies significantly in terms of subunits and linkages across plant species, leading to considerable differences in their reactivity, in the distribution of resulting monomers, and in their subsequent utilization. In this context, this Account highlights our recent studies on the catalytic hydrogenolysis of lignin into serviceable products for preparing valuable materials, fuels, and chemicals. First, we designed a series of catalytic systems for lignin hydrogenolysis specifically tailored to the structural features of lignin from wood, grass, and certain seed coats. To reduce reliance on expensive commercial catalysts like Pd/C, Ru/C, and Pt/C, we advanced heterogeneous metal catalysts by shifting from high-loaded nanostructured metals to low-loaded, atomically dispersed metals and replacing precious metals with nonprecious alternatives. This approach significantly reduces the cost of catalysts, enhances their atomic economy, and improves their catalytic activity and/or selectivity. Then, using the developed catalysts, phenolic monomers tethering a distinct side chain were selectively generated from the hydrogenolysis of lignin (from various plants), achieving yields close to the theoretical maximum. The high selectivity allowed the separation and purification of monomeric phenols from lignin reaction mixtures readily. To gain deeper insights into the cleavage of lignin C-O bonds, we designed deuterium-incorporated β-O-4 mimics (dimers and one polymer) for a mechanistic study, which excluded the pathways involving the loss of linkage protons and led to the proposal of a concerted hydrogenolysis process for β-O-4 cleavage. Finally, to enable the utilization of depolymerized lignin phenolic monomers, unconventional feedstocks in the current chemical industry, we developed a series of methods to transform them into valuable bioactive molecules, functional materials, and high-energy fuels. Overall, these contributions opened new avenues for converting lignin into serviceable products, encompassing upstream processing and downstream applications.

Transformation of Lignin Under Protection Strategies: Catalytic Oxidation and Depolymerization by Polyoxometalates Catalysts

The efficient utilization of lignin, a pivotal component of lignocellulosic biomass, is crucial for advancing sustainable biorefinery processes. However, optimizing lignin valorization remains challenging due to its intricate structure and susceptibility to undesirable reactions during processing. In this study, we delve into the impact of various pretreatment agents on birch lignin, aiming to enhance its catalytic oxidation and depolymerization under polyoxometalates (POMs) catalysis. Our results reveal that pretreatment with formaldehyde effectively safeguards aryl ether linkages in lignin, leading to a notable increase in aromatic compound yields under POMs catalysis. Furthermore, gel permeation chromatography (GPC) analysis underscores the inhibition of aryl ether linkage hydrolysis upon formaldehyde addition. Gas chromatography-mass spectrometry (GC-MS) analysis demonstrates that formaldehyde pretreatment boosts lignin monomer yield by 2 to 3 times compared to untreated lignin, underscoring the effectiveness of tailored pretreatment strategies. This research underscores the significance of adopting rational pretreatment methods to advance lignin valorization pathways catalyzed by POMs, thereby contributing to the evolution of sustainable biomass conversion technologies.

Lignin hydrogenolysis: Tuning the reaction by lignin chemistry

Replacing fossil resource with biomass is one of the promising approaches to reduce our carbon footprint. Lignin is one of the three major components of lignocellulosic biomass, accounting for 10-35 wt% of dried weight of the biomass. Hydrogenolytic depolymerization of lignin is attracting increasing attention because of its capacity of utilizing lignin in its uncondensed form and compatibility with the biomass fractionation processes. Lignin is a natural aromatic polymer composed of a variety of monolignols associated with a series of lignin linkage motifs. Hydrogenolysis cleaves various ether bonds in lignin and releases phenolic monomers which can be further upgraded into valuable products, i.e., drugs, terephthalic acid, phenol. This review provides an overview of the state-of-the-art advances of the reagent (lignin), products (hydrol lignin), mass balance, and mechanism of the lignin hydrogenolysis reaction. The chemical structure of lignin is reviewed associated with the free radical coupling of monolignols and the chemical reactions of lignin upon isolation processes. The reactions of lignin linkages upon hydrogenolysis are discussed. The components of hydrol lignin and the selectivity production of phenolic monomers are reviewed. Future challenges on hydrogenolysis of lignin are proposed. This article provides an overview of lignin hydrogenolysis reaction which shows light on the generation of optimized lignin ready for hydrogenolytic depolymerization.

Benzenoid Aromatics from Renewable Resources

In this Review, all known chemical methods for the conversion of renewable resources into benzenoid aromatics are summarized. The raw materials that were taken into consideration are CO2; lignocellulose and its constituents cellulose, hemicellulose, and lignin; carbohydrates, mostly glucose, fructose, and xylose; chitin; fats and oils; terpenes; and materials that are easily obtained via fermentation, such as biogas, bioethanol, acetone, and many more. There are roughly two directions. One much used method is catalytic fast pyrolysis carried out at high temperatures (between 300 and 700 °C depending on the raw material), which leads to the formation of biochar; gases, such as CO, CO2, H2, and CH4; and an oil which is a mixture of hydrocarbons, mostly aromatics. The carbon selectivities of this method can be reasonably high when defined small molecules such as methanol or hexane are used but are rather low when highly oxygenated compounds such as lignocellulose are used. The other direction is largely based on the multistep conversion of platform chemicals obtained from lignocellulose, cellulose, or sugars and a limited number of fats and terpenes. Much research has focused on furan compounds such as furfural, 5-hydroxymethylfurfural, and 5-chloromethylfurfural. The conversion of lignocellulose to xylene via 5-chloromethylfurfural and dimethylfuran has led to the construction of two large-scale plants, one of which has been operational since 2023.

Microwave Depolymerization of Lignin via Dynamic Vapor Flow Reaction System: HCOOH as Pretreatment Solvent or Reforming Solvent Vapor

Different forms of HCOOH in the depolymerization system play an important role in governing the monomeric products from lignin. We reported two strategies for the introduction of HCOOH to enrich the monophenols from kraft lignin by microwave-assisted depolymerization. The reaction of lignin models showed that HCOOH was in favor of the cleavage of C-O bonds (β-O-4 typically) and partial C-C bonds (Cα-Cβ). Subsequently, Microwave-assisted depolymerization of lignin with two strategies was conducted via a designed dynamic vapor flow reaction system. Strategy A with HCOOH as pretreatment solvent showed excellent monophenols enrichment with total mass yields of 193.71 mg/g (lignin basis). Strategy B using HCOOH as reforming solvent vapor significantly increased the monophenols selectivity. It presented unique reforming and upgrading performance by generating catechol (42.59 mg/g, lignin basis) and homovanillic acid (17.58 mg/g, lignin basis). This study provided potential strategies for the efficient conversion of kraft lignin into high-value platform chemicals.

Selective Cleavage of Cβ-O-4 Bond for Lignin Depolymerization via Paired-Electrolysis in an Undivided Cell

The cleavage of C-O bonds is one of the most promising strategies for lignin-to-chemicals conversion, which has attracted considerable attention in recent years. However, current catalytic system capable of selectively breaking C-O bonds in lignin often requires a precious metal catalyst and/or harsh conditions such as high-pressure H2 and elevated temperatures. Herein, we report a novel protocol of paired electrolysis to effectively cleave the Cβ-O-4 bond of lignin model compounds and real lignin at room temperature and ambient pressure. For the first time, "cathodic hydrogenolysis of Cβ-O-4 linkage" and "anodic C-H/N-H cross-coupling reaction" are paired in an undivided cell, thus the cleavage of C-O bonds and the synthesis of valuable triarylamine derivatives could be simultaneously achieved in an energy-effective manner. This protocol features mild reaction conditions, high atom economy, remarkable yield with excellent chemoselectivity, and feasibility for large-scale synthesis. Mechanistic studies indicate that indirect H* (chemical absorbed hydrogen) reduction instead of direct electron transfer might be the pathway for the cathodic hydrogenolysis of Cβ-O-4 linkage.

Design and Validation of a High-Throughput Reductive Catalytic Fractionation Method

Reductive catalytic fractionation (RCF) is a promising method to extract and depolymerize lignin from biomass, and bench-scale studies have enabled considerable progress in the past decade. RCF experiments are typically conducted in pressurized batch reactors with volumes ranging between 50 and 1000 mL, limiting the throughput of these experiments to one to six reactions per day for an individual researcher. Here, we report a high-throughput RCF (HTP-RCF) method in which batch RCF reactions are conducted in 1 mL wells machined directly into Hastelloy reactor plates. The plate reactors can seal high pressures produced by organic solvents by vertically stacking multiple reactor plates, leading to a compact and modular system capable of performing 240 reactions per experiment. Using this setup, we screened solvent mixtures and catalyst loadings for hydrogen-free RCF using 50 mg poplar and 0.5 mL reaction solvent. The system of 1:1 isopropanol/methanol showed optimal monomer yields and selectivity to 4-propyl substituted monomers, and validation reactions using 75 mL batch reactors produced identical monomer yields. To accommodate the low material loadings, we then developed a workup procedure for parallel filtration, washing, and drying of samples and a 1H nuclear magnetic resonance spectroscopy method to measure the RCF oil yield without performing liquid-liquid extraction. As a demonstration of this experimental pipeline, 50 unique switchgrass samples were screened in RCF reactions in the HTP-RCF system, revealing a wide range of monomer yields (21-36%), S/G ratios (0.41-0.93), and oil yields (40-75%). These results were successfully validated by repeating RCF reactions in 75 mL batch reactors for a subset of samples. We anticipate that this approach can be used to rapidly screen substrates, catalysts, and reaction conditions in high-pressure batch reactions with higher throughput than standard batch reactors.

Innovative flow-through reaction system for the sustainable production of phenolic monomers from lignocellulose catalyzed by supported Mo2C

Molybdenum carbide supported on activated carbon (β-Mo2C/AC) has been tested as catalyst in the reductive catalytic fractionation (RCF) of lignocellulosic biomass both in batch and in Flow-Through (FT) reaction systems. High phenolic monomer yields (34 wt.%) and selectivity to monomers with reduced side alkyl chains (up to 80 wt.%) could be achieved in batch in the presence of hydrogen. FT-RCF were made with no hydrogen feed, thus via transfer hydrogenation from ethanol. Similar selectivity could be attained in FT-RCF using high catalyst/biomass ratios (0.6) and high molybdenum loading (35 wt.%) in the catalyst, although selectivity decreased with lower catalyst/biomass ratios or molybdenum contents. Regardless of these parameters, high delignification of the lignocellulosic biomass and similar monomer yields were observed in the FT mode (13-15 wt.%) while preserving the holocellulose fractions in the delignified pulp. FT-RCF system outperforms the batch reaction mode in the absence of hydrogen, both in terms of activity and selectivity to reduced monomers that is attributed to the two-step non-equilibrium processes and the removal of diffusional limitations that occur in the FT mode. Even though some molybdenum leaching was detected, the catalytic performance could be maintained with negligible loss of activity or selectivity for 15 consecutive runs.

Advances in Heterogeneous Catalysts for Lignin Hydrogenolysis

Lignin is the main component of lignocellulose and the largest source of aromatic substances on the earth. Biofuel and bio-chemicals derived from lignin can reduce the use of petroleum products. Current advances in lignin catalysis conversion have facilitated many of progress, but understanding the principles of catalyst design is critical to moving the field forward. In this review, the factors affecting the catalysts (including the type of active metal, metal particle size, acidity, pore size, the nature of the oxide supports, and the synergistic effect of the metals) are systematically reviewed based on the three most commonly used supports (carbon, oxides, and zeolites) in lignin hydrogenolysis. The catalytic performance (selectivity and yield of products) is evaluated, and the emerging catalytic mechanisms are introduced to better understand the catalyst design guidelines. Finally, based on the progress of existing studies, future directions for catalyst design in the field of lignin depolymerization are proposed.

Surface Modification of Kraft Lignin by Mechanochemical Processing with Sodium Percarbonate

In this article, we present a novel one-pot mechanochemical reaction for the surface activation of lignin. The process involves environmentally friendly oxidation with hydrogen peroxide, depolymerization of fractions with high molecular mass, and introduction of new carbonyl functions into the lignin backbone. Kraft lignin was ground with sodium percarbonate and sodium hydroxide in a ball mill at different time intervals. Analyses by infrared spectroscopy (IR), nuclear magnetic resonance spectroscopy (NMR), size exclusion chromatography (SEC), dynamic vapor sorption (DVS), and small-angle X-ray scattering (SAXS) showed significant improvements. After only 5 min of reaction, there was a 47% reduction in mass-average molecular weight and an increase in carboxyl functionalities. Chemical activation resulted in an approximately 2.8-fold increase in water adsorption. Principal component analysis (PCA) provided further insight into the correlations between IR spectra and SAXS parameters.

Pd-Based Nano-Catalysts Promote Biomass Lignin Conversion into Value-Added Chemicals

Lignin, as a structurally complex biomaterial, offers a valuable resource for the production of aromatic chemicals; however, its selective conversion into desired products remains a challenging task. In this study, we prepared three types of Pd-based nano-catalysts and explored their application in the depolymerization of alkali lignin, under both H₂-free (hydrogen transfer) conditions and H₂ atmosphere conditions. The materials were well characterized with TEM, XRD, and XPS and others, and the electronic interactions among Pd, Ni, and P were analyzed. The results of lignin depolymerization experiments revealed that the ternary Pd-Ni-P catalyst exhibited remarkable performance and guaiacols could be produced under H₂ atmosphere conditions in 14.2 wt.% yield with a selectivity of 89%. In contrast, Pd-Ni and Pd-P catalysts resulted in a dispersed product distribution. Considering the incorporation of P and the Pd-Ni synergistic effect in the Pd-Ni-P catalyst, a possible water-involved transformation route of lignin depolymerization was proposed. This work indicates that metal phosphides could be promising catalysts for the conversion of lignin and lignin-derived feedstocks into value-added chemicals.

Mechanism of enhanced enzymatic hydrolysis performance by ethanol assisted deep eutectic solvent pretreatment- from the perspective of lignin

Valorization of lignocellulose has received a lot of attention due to the abundance of lignocellulosics. It was showed that synergistic carbohydrate conversion and delignification could be achieved via ethanol assisted DES (choline chloride/lactic acid) pretreatment. To explore the reaction mechanism of lignin in the DES, milled wood lignin obtained from Broussonetia papyrifera was subjected to pretreatment at critical temperatures. The results suggested that ethanol assistance could contribute the incorporation of ethyl groups and reduce condensation structures of Hibbert's ketone. Adding ethanol at 150 °C not only decreased formation of condensed G unit (from 7.23% to 0.87%), but also removed J and S' substructures, thus effectively reducing the adsorption of lignin on cellulase, and promoting the glucose yield after enzymatic hydrolysis.

Unraveling the Lignin Structural Variation in Different Bamboo Species

The structure of cellulolytic enzyme lignin (CEL) prepared from three bamboo species (Neosinocalamus affinis, Bambusa lapidea, and Dendrocalamus brandisii) has been characterized by different analytical methods. The chemical composition analysis revealed a higher lignin content, up to 32.6% of B. lapidea as compared to that of N. affinis (20.7%) and D. brandisii (23.8%). The results indicated that bamboo lignin was a p-hydroxyphenyl-guaiacyl-syringyl (H-G-S) lignin associated with p-coumarates and ferulates. Advanced NMR analyses displayed that the isolated CELs were extensively acylated at the γ-carbon of the lignin side chain (with either acetate and/or p-coumarate groups). Moreover, a predominance of S over G lignin moieties was found in CELs of N. affinis and B. lapidea, with the lowest S/G ratio observed in D. brandisii lignin. Catalytic hydrogenolysis of lignin demonstrated that 4-propyl-substituted syringol/guaiacol and propanol guaiacol/syringol derived from β-O-4' moieties, and methyl coumarate/ferulate derived from hydroxycinnamic units were identified as the six major monomeric products. We anticipate that the insights of this work could shed light on the sufficient understanding of lignin, which could open a new avenue to facilitate the efficient utilization of bamboo.

Acidic deep eutectic solvent assisted mechanochemical delignification of lignocellulosic biomass at room temperature

Lignocellulosic biomass is the most abundant natural polymer on Earth, but the efficient fractionation and refinery of all its components remain challenging. Acidic deep eutectic solvents refining is a promising method, while it is likely to cause lignin condensation and carbohydrates degradation, especially at server operation conditions. Here we propose the use of acidic deep eutectic solvent (DES), choline chloride/p-toluenesulfonic acid assisted mechanochemical pretreatment (DM) for efficient lignocellulose fractionation at mild condition. Four representative lignocellulose, wheat straw, moso bamboo, poplar wood and pine wood were selected at varied milling time (3, 6 h) to assess the fractionation ability of this strategy. This DM pretreatment demonstrated a rather high cellulose retentions (∼90 %) and extent of delignification for wheat straw and bamboo biomass, which corresponds to a high extent of enzymatic hydrolysis (∼75.5 %) for sugar platform pursuing. The extracted lignin showed rather high content of β-O-4' leakages due to the swelling effect of deep eutectic solvent and mild operation conditions. This work provided a promising strategy to fractionate lignocellulose using deep eutectic solvents with the goal of simultaneous cellulose hydrolysis and reactive lignin obtaining that is usually difficult to realize using traditional chemical fractionation approach.

Valorization of lignin through reductive catalytic fractionation of fermented corn stover residues

The fermented corn stover residues are abundant renewable lignin-rich bioresources that show great potential to produce aromatic phenols. However, selective catalytic hydrogenolysis of this residual material still remains challenge to obtain high yields. Herein, a novel strategy to produce monophenolic compounds from the fermented stover over a commercial Pd/C catalyst was proposed. Taking the reaction temperature as the key variable, the highest monomer yield was 28.5 wt% at 220 °C in compaction with that of the pristine corn stover (22.8 wt%). The enhanced monophenol yield was due to the higher contents of lignin and less recalcitrance in the fermented stover. Moreover, the van Krevelen diagram revealed a slight selective CO bond scission of lignin macromolecular during fermentation as well as the dehydration and deoxygenation in hydrogenolysis reaction. Overall, this work opens a new avenue for the valorization of lignin through reductive catalytic fractionation of agricultural wastes.

Lignin-based composites with enhanced mechanical properties by acetone fractionation and epoxidation modification

Epoxy resin is widely used in various fields of the national economy due to its excellent chemical and mechanical properties. Lignin is mainly derived from lignocelluloses as one of the most abundant renewable bioresources. Due to the diversity of lignin sources and the complexity as well as heterogeneity of its structure, the value of lignin has not been fully realized. Herein, we report the utilization of industrial alkali lignin for the preparation of low-carbon and environmentally friendly bio-based epoxy thermosetting materials. Specifically, epoxidized lignin with substituted petroleum-based chemical bisphenol A diglycidyl ether (BADGE) in various proportions was cross-linked to fabricate thermosetting epoxies. The cured thermosetting resin revealed enhanced tensile strength (4.6 MPa) and elongation (315.5%) in comparison with the common BADGE polymers. Overall, this work provides a practicable approach for lignin valorization toward tailored sustainable bioplastics in the context of a circular bioeconomy.

Reductive Catalytic Fractionation of Abies Wood into Bioliquids and Cellulose with Hydrogen in an Ethanol Medium over NiCuMo/SiO2 Catalyst

Noble metal-based catalysts are widely used to intensify the processes of reductive fractionation of lignocellulose biomass. In the present investigation, we proposed for the first time using the inexpensive NiCuMo/SiO2 catalyst to replace Ru-, Pt-, and Pd-containing catalysts in the process of reductive fractionation of abies wood into bioliquids and cellulose products. The optimal conditions of abies wood hydrogenation were selected to provide the effective depolymerization of wood lignin (250 °C, 3 h, initial H2 pressure 4 MPa). The composition and structure of the liquid and solid products of wood hydrogenation were established. The NiCuMo/SiO2 catalyst increases the yield of bioliquids (from 36 to 42 wt%) and the content of alkyl derivatives of methoxyphenols, predominantly 4-propylguaiacol and 4-propanolguaiacol. A decrease in the molecular mass and polydispersity (from 1870 and 3.01 to 1370 Da and 2.66, respectively) of the liquid products and a threefold increase (from 9.7 to 36.8 wt%) in the contents of monomer and dimer phenol compounds were observed in the presence of the catalyst. The solid product of catalytic hydrogenation of abies wood contains up to 73.2 wt% of cellulose. The composition and structure of the solid product were established using IRS, XRD, elemental and chemical analysis. The data obtained show that the catalyst NiCuMo/SiO2 can successfully replace noble metal catalysts in the process of abies wood reductive fractionation into bioliquids and cellulose.

Preparation, characterization and formation mechanism of size-controlled lignin nanoparticles

Lignin is a renewable raw material with excellent adsorption, biodegradability, and non-toxicity. As a new, green nanomaterial, lignin nanoparticles (LNPs) have been explored as high-value renewable materials for applications in many fields. Herein, we provide a simple, rapid approach for the fabrication of size-controlled LNPs using a titrimetric nanoprecipitation method. The prepared LNPs were formed through a layer-by-layer self-assembly approach from inside to outside based on π-π interactions and had spherical shapes with porous surfaces and particle sizes from 272.0 to 915.4 nm. The average particle size of LNPs varied with stirring speed and decreased as the volume of deionized water increased. Compared with those of the original lignin, the chemical structural characteristics of LNPs did not change significantly. The proposed scheme for the preparation of LNPs is simple, inexpensive, and possesses the properties of both lignin and nanomaterials. The sizes of LNPs were controlled. Therefore, this is a good scheme for high-value applications of lignin.

Lignin-First Depolymerization of Lignocellulose into Monophenols over Carbon Nanotube-Supported Ruthenium: Impact of Lignin Sources

Lignin-first depolymerization of lignocellulosic biomass into aromatics is of great significance to sustainable biorefinery. However, it remains a challenge, owing to the variance between lignin sources and structures. In this study, ruthenium supported on carbon nanotubes (Ru/CNT) exhibits efficient catalytic activity toward lignin hydrogenolysis to exclusively afford monophenols in high yields. Catalytic tests indicate that the yields of aromatic monomers are related to lignin sources and decrease in the order: hardwoods > herbaceous plants > softwoods. Experimental results demonstrate that the scission of C-O bonds and the high selectivity to monomeric aromatic compounds over the Ru/CNT catalyst are enhanced by avoiding side condensation. Furthermore, the fabricated Ru/CNT shows good reusability and recyclability, applicability, and biomass feedstock compatibility, rendering it a promising candidate for lignin valorization. These findings pave the way for rational design of highly active and stable catalysts to potentially address challenges in lignin chemistry.

Carbon-Based Nanocatalysts (CnCs) for Biomass Valorization and Hazardous Organics Remediation

The continuous increase of the demand in merchandise and fuels augments the need of modern approaches for the mass-production of renewable chemicals derived from abundant feedstocks, like biomass, as well as for the water and soil remediation pollution resulting from the anthropogenic discharge of organic compounds. Towards these directions and within the concept of circular (bio)economy, the development of efficient and sustainable catalytic processes is of paramount importance. Within this context, the design of novel catalysts play a key role, with carbon-based nanocatalysts (CnCs) representing one of the most promising class of materials. In this review, a wide range of CnCs utilized for biomass valorization towards valuable chemicals production, and for environmental remediation applications are summarized and discussed. Emphasis is given in particular on the catalytic production of 5-hydroxymethylfurfural (5-HMF) from cellulose or starch-rich food waste, the hydrogenolysis of lignin towards high bio-oil yields enriched predominately in alkyl and oxygenated phenolic monomers, the photocatalytic, sonocatalytic or sonophotocatalytic selective partial oxidation of 5-HMF to 2,5-diformylfuran (DFF) and the decomposition of organic pollutants in aqueous matrixes. The carbonaceous materials were utilized as stand-alone catalysts or as supports of (nano)metals are various types of activated micro/mesoporous carbons, graphene/graphite and the chemically modified counterparts like graphite oxide and reduced graphite oxide, carbon nanotubes, carbon quantum dots, graphitic carbon nitride, and fullerenes.

Experimental and computational studies of cellulases as bioethanol enzymes

Bioethanol industries and bioprocesses have many challenges that constantly impede commercialization of the end product. One of the bottlenecks in the bioethanol industry is the challenge of discovering highly efficient catalysts that can improve biomass conversion. The current promising bioethanol conversion catalysts are microorganism-based cellulolytic enzymes, but lack optimization for high bioethanol conversion, due to biological and other factors. A better understanding of molecular underpinnings of cellulolytic enzyme mechanisms and significant ways to improve them can accelerate the bioethanol commercial production process. In order to do this, experimental methods are the primary choice to evaluate and characterize cellulase’s properties, but they are time-consuming and expensive. A time-saving, complementary approach involves computational methods that evaluate the same properties and improves our atomistic-level understanding of enzymatic mechanism of action. Theoretical methods in many cases have proposed research routes for subsequent experimental testing and validation, reducing the overall research cost. Having a plethora of tools to evaluate cellulases and the yield of the enzymatic process will aid in planning more optimized experimental setups. Thus, there is a need to connect the computational evaluation methods with the experimental methods to overcome the bottlenecks in the bioethanol industry. This review discusses various experimental and computational methods and their use in evaluating the multiple properties of cellulases.

Ni12P5/P-N-C Derived from Natural Single-Celled Chlorella for Catalytic Depolymerization of Lignin into Monophenols

Lignin is exceptionally abundant in nature and is regarded as a renewable, cheap, and environmentally friendly resource for the manufacture of aromatic chemicals. A novel Ni₁₂P₅/P-N-C catalyst for catalytic hydrogenolysis of lignin was synthesized. The catalysts were prepared by simple impregnation and carbonization using the nonprecious metal Ni taken up by the cell wall of Chlorella in Ni(NO₃)₂ solution. There were only two steps in this process, making the whole process very simple, efficient, and economical. Ni₁₂P₅ was uniformly distributed in the catalyst. During the hydrogenolysis of lignin, after 4 h reaction at 270 °C, the yield of bio-oil reached 65.26%, the yield of monomer reached 9.60%, and the selectivity to alkylphenol reached 76.15%. The mixed solvent of ethanol/isopropanol (1:1, v/v) is used as the solvent for the hydrogenolysis of lignin, which not only had excellent hydrogen transferability but also improved the yield of bio-oil, inhibiting the generation of char. No external hydrogen was used, thus avoiding safety issues in hydrogen transport and storage.

Integrated Cascade Biorefinery Processes to Transform Woody Biomass Into Phenolic Monomers and Carbon Quantum Dots

A novel cascade biorefinery strategy toward phenolic monomers and carbon quantum dots (CQDs) is proposed here via coupling catalytic hydrogenolysis and hydrothermal treatment. Birch wood was first treated with catalytic hydrogenolysis to afford a high yield of monomeric phenols (44.6 wt%), in which 4-propanol guaiacol (10.2 wt%) and 4-propanol syringol (29.7 wt%) were identified as the two major phenolic products with 89% selectivity. An available carbohydrate pulp retaining 82.4% cellulose and 71.6% hemicellulose was also obtained simultaneously, which was further used for the synthesis of CQDs by a one-step hydrothermal process. The as-prepared CQDs exhibited excellent selectivity and detection limits for several heavy metal cations, especially for Fe³⁺ ions in an aqueous solution. Those cost-efficient CQDs showed great potential in fluorescent sensor in situ environmental analyses. These findings provide a promising path toward developing high-performance sensors on environmental monitoring and a new route for the high value-added utilization of lignocellulosic biomass.

Screening of Adsorbent/Catalyst Composite Monoliths for Carbon Capture-Utilization and Ethylene Production

Combining CO₂ adsorption and utilization in oxidative dehydrogenation of ethane (ODHE) into a single bed is an exciting way of converting a harmful greenhouse gas into marketable commodity chemicals while reducing energy requirements from two-bed processes. However, novel materials should be developed for this purpose because most adsorbents are incapable of capturing CO₂ at the temperatures required for ODHE reactions. Some progress has been made in this area; however, previously reported dual-functional materials (DFMs) have always been powdered-state composites and no efforts have been made toward forming these materials into practical contactors. In this study, we report the first-generation of structured DFM adsorbent/catalyst monoliths for combined CO₂ capture and ODHE utilization. Specifically, we formulated M-CaO/ZSM-5 monoliths (M = In, Ce, Cr, or Mo oxides) by 3D-printing inks with CaCO₃ (CaO precursor), insoluble metal oxides, and ZSM-5. The physiochemical properties of the monoliths were vigorously characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), N₂ physisorption, elemental mapping, pyridine Fourier transform infrared spectroscopy (Py-FTIR), H₂-temperature-programmed reduction (H₂-TPR), and NH₃-temperature-programmed desorption (NH₃-TPD). Their performances for combined CO₂ adsorption at 600 °C and ODHE reaction at 700 °C under 25 mL/min of 7% C₂H₆ were then investigated. The combined adsorption/catalysis experiments revealed the best performance in Cr-CaO/ZSM-5, which achieved 56% CO₂ conversion, 91.2% C₂H₄ selectivity, and 33.8% C₂H₄ yield. This exceptional performance, which was improved from powdered-state DFMs, was attributed to the high acidity and numerous oxidation states of the Cr₂O₃ dopant which were verified by NH₃-TPD and H₂-TPR. Overall, this study reports the first-ever proof-of-concept for 3D-printed DFM adsorbent/catalyst materials and furthers the area of CO₂ capture and ODHE utilization by providing a simple pathway to structure these composites.

Molybdenum-catalyzed hydrogenolysis of herbaceous biomass: A procedure integrated lignin fragmentation and components fractionation

In this work, a low-cost MoO₂/C catalyst was prepared for the reductive catalytic fractionation (RCF) of various herbaceous biomass feedstocks (Miscanthus, Triarrhena, Floridulus, Sorghum stem and Corncob). Phenolic monomers from the hydrogenolysis of lignin component were obtained in up to 26.4 wt%, with high selectivity towards methyl coumarate (33%) and methyl ferulate (24%). The RCF left solid carbohydrate pulps with high retentions (up to 87%), which were suitable for enzymatic hydrolysis. The reaction conditions, including temperature, time, H₂ pressure, and sawdust size were examined in terms of monophenols yield, selectivity, delignification and sugar retention. This study showed that MoO₂/C could function as an excellent catalyst for lignin fragmentation as well as the fractionation of herbaceous biomass components.

Advances in Versatile Nanoscale Catalyst for the Reductive Catalytic Fractionation of Lignin

In the past five years, biomass-derived biofuels and biochemicals were widely studied both in academia and industry as promising alternatives to petroleum. In this Review, the latest progress of the synthesis and fabrication of porous nanocatalysts that are used in catalytic transformations involving hydrogenolysis of lignin is reviewed in terms of their textural properties, catalytic activities, and stabilities. A particular emphasis is made with regard to the catalyst design for the hydrogenolysis of lignin and/or lignin model compounds. Furthermore, the effects of different supports on the lignin hydrogenolysis/hydrogenation are discussed in detail. Finally, the challenges and future opportunities of lignin hydrogenolysis over nanomaterial-supported catalysts are also presented.

2G waste lignin to fuel and high value-added chemicals: Approaches, challenges and future outlook for sustainable development

Lignin is produced as a byproduct in cellulosic biorefinery as well in pulp and paper industries and has the potential for the synthesis of a variety of phenolics chemicals, biodegradable polymers, and high value-added chemicals surrogate to conventional petro-based fuels. Therefore, in this critical review, we emphasize the possible scenario for lignin isolation, transformation into value addition chemicals/materials for the economic viability of current biorefineries. Additionally, this review covers the chemical structure of lignocellulosic biomass/lignin, worldwide availability of lignin and describe various thermochemical (homogeneous/heterogeneous base/acid-catalyzed depolymerization, oxidative, hydrogenolysis etc.) and biotechnological developments for the production of bio-based low molecular weight phenolics, i.e. polyhydroxyalkanoates, vanillin, adipic acid, lipids etc. Besides, some functional chemicals applications, lignin-formaldehyde ion exchange resin, electrochemical and production of few targeted chemicals are also elaborated. Finally, we examine the challenges, opportunities and prospects way forward related to lignin valorization.

Conversion of Polyolefin Waste to Liquid Alkanes with Ru-Based Catalysts under Mild Conditions

Chemical upcycling of waste polyolefins via hydrogenolysis offers unique opportunities for selective depolymerization compared to high temperature thermal deconstruction. Here, we demonstrate the hydrogenolysis of polyethylene into liquid alkanes under mild conditions using ruthenium nanoparticles supported on carbon (Ru/C). Reactivity studies on a model n-octadecane substrate showed that Ru/C catalysts are highly active and selective for the hydrogenolysis of C(sp³)-C(sp³) bonds at temperatures ranging from 200 to 250 °C. Under optimal conditions of 200 °C in 20 bar H₂, polyethylene (average M _w ∼ 4000 Da) was converted into liquid n-alkanes with yields of up to 45% by mass after 16 h using a 5 wt % Ru/C catalyst with the remaining products comprising light alkane gases (C₁-C₆). At 250 °C, nearly stoichiometric yields of CH₄ were obtained from polyethylene over the catalyst. The hydrogenolysis of long chain, low-density polyethylene (LDPE) and a postconsumer LDPE plastic bottle to produce C₇-C₄₅ alkanes was also achieved over Ru/C, demonstrating the feasibility of this reaction for the valorization of realistic postconsumer plastic waste. By identifying Ru-based catalysts as a class of active materials for the hydrogenolysis of polyethylene, this study elucidates promising avenues for the valorization of plastic waste under mild conditions.

Selective hydrogenolysis of catechyl lignin into propenylcatechol over an atomically dispersed ruthenium catalyst

C-lignin is a homo-biopolymer, being made up of caffeyl alcohol exclusively. There is significant interest in developing efficient and selective catalyst for depolymerization of C-lignin, as it represents an ideal feedstock for producing catechol derivatives. Here we report an atomically dispersed Ru catalyst, which can serve as an efficient catalyst for the hydrogenolysis of C-lignin via the cleavage of C-O bonds in benzodioxane linkages, giving catechols in high yields with TONs up to 345. A unique selectivity to propenylcatechol (77%) is obtained, which is otherwise hard to achieve, because this catalyst is capable of hydrogenolysis rather than hydrogenation. This catalyst also demonstrates good reusability in C-lignin depolymerization. Detailed investigations by model compounds concluded that the pathways involving dehydration and/or dehydrogenation reactions are incompatible routes; we deduced that caffeyl alcohol generated via concurrent C-O bonds cleavage of benzodioxane unit may act as an intermediate in the C-lignin hydrogenolysis. Current demonstration validates that atomically dispersed metals can not only catalyze small molecules reactions, but also drive the transformation of abundant and renewable biopolymer.

Novel lignin-containing high-performance adhesive for extreme environment

The gradual depletion of petroleum is a main challenge restricting the development for the fine chemicals, such as epoxy resin adhesive. In this study, a novel lignin-containing high-performance epoxy resin adhesive is synthesized using lignin as precursor material. Lignin is a unique biomacromolecule with three dimensional network structure, large molecular weight, and aromatic structure. The lignin is simply hydrolyzed and modified by epichlorohydrin to obtain lignin-based epoxy prepolymer. The hydrolysis process effectively reduces the molecular weight and improves the chemical reactivity of lignin, thus increasing the number of modified functional groups and the dispersibility of lignin concurrently. With the introduction of the lignin-based epoxy prepolymers, the shear strength of the adhesive increases obviously and reaches 10.42 MPa, which displays 228% of the shear strength of commercial epoxy resin adhesives. Furthermore, the lignin-containing epoxy resin adhesive still displays excellent mechanical properties in extreme environments, including extreme temperature and high humidity environment.

Unlocking Structure-Reactivity Relationships for Catalytic Hydrogenolysis of Lignin into Phenolic Monomers

Lignin depolymerization into aromatic monomers with high yields and selectivity is essential for the economic feasibility of biorefinery. However, the relationship between lignin structure and its reactivity for upgradeability is still poorly understood, in large part owing to the difficulty in quantitative characterization of lignin structural properties. To overcome these shortcomings, advanced NMR technologies [2D HSQC (heteronuclear single quantum coherence) and ³¹ P] were used to accurately quantify lignin functionalities. Diverse lignin samples prepared from Eucalyptus grandis with varying β-O-4 linkages were subjected to Pd/C-catalyzed hydrogenolysis for efficient C-O bond cleavage to achieve theoretical monomer yields. Strong correlations were observed between the yield of monomeric aromatic compounds and the structural features of lignin, including the contents of β-O-4 linkages and phenolic hydroxyl groups. Notably, a combined yield of up to 44.1 wt % was obtained from β-aryl ether rich in native lignin, whereas much lower yields were obtained from technical lignins low in β-aryl ether content. This work quantitatively demonstrates that the lignin reactivity for acquiring aromatic monomer yields varies depending on the lignin fractionation processes.

Lignin Source and Structural Characterization

Lignin is a primary component of lignocellulosic biomass and an underutilized feedstock in the growing pulping and biofuel industries. Currently, over 50 million tons of industrial lignin are produced annually from pulping and bioethanol processes in the world. Around 95 % of industrial lignin is burned as fuel in heat and power plants due to its complicated, destructive, and condensed structures hindering direct industrial utilization, while the remaining 5 % of lignin is used for potential applications, such as additives, binders, dispersants, and surfactants, through modification. Meanwhile, different biorefinery processes also produce a considerable amount of lignin with various structural features and properties. The development of technologies for its structural characterization is currently desirable for lignin valorization, which will improve the techno-economics of applications of lignins in industries.

Product-oriented Direct Cleavage of Chemical Linkages in Lignin

Lignin is one of the most important biomacromolecules in the plant biomass and the largest renewable source of aromatic building blocks in nature. Selectively producing value-added chemicals from the catalytic transformation of renewable lignin is of strategic significance and meet sustainability targets owing to the excessive consumption of non-renewable petroleum resource, but remains a long-term challenge owing to the complexity of lignin structure. This Minireview provides a summary and perspective of the extensive research that provides insight into selectively catalytic transformations of lignin and its derived monomers via directed scissor of chemical linkages (C-O and C-C bonds) with product-oriented targets. Furthermore, some challenges and opportunities of lignin catalytic transformation are provided based on existing problems in this field for readers to discuss future research directions.

Effective Depolymerization of Sodium Lignosulfonate over SO42−/TiO2 Catalyst

In this paper, liquefaction of sodium lignosulfonate (SL) over SO42−/TiO2 catalyst in methanol/glycerol was investigated. Effects of temperature, time, the ratio of methanol to glycerol and catalyst dosage were also studied. It was indicated that optimal reaction condition (the temperature of 160 °C, the time of 1 h, solvent ratio (methanol/glycerol) of 2:1, catalyst dosage of 5 wt % (based on lignin input)) was obtained after sets of experiments. The maximum yields of liquefaction (89.8%) and bio-oil (86.8%) were gained under the optimal reaction conditions. Bio-oil was analyzed by elemental analysis, FT-IR and gas chromatogram and mass spectrometry (GC/MS). It was shown that the functional groups of bio-oil were enriched and calorific value of bio-oil was increased. Finally, it can be seen from GC/MS analysis that the type of products included alcohols, ethers, phenols, ketones, esters and acids. Phenolic compounds mainly consisted of G (guaiacyl)-type phenols.