Oxygen Evolution Reaction on Perovskites: A Multieffect Descriptor Study Combining Experimental and Theoretical Methods

Revealing the Intrinsic Oxygen Evolution Reaction Activity of Perovskite Oxides across Conductivity Ranges Using Thin Film Model Systems

The development of efficient electrocatalysts in water electrolysis is essential to decrease the high overpotentials, especially at the anode where the oxygen evolution reaction (OER) takes place. However, establishing catalyst design rules to find the optimal electrocatalysts is a substantial challenge. Complex oxides, which are often considered as suitable OER catalysts, can exhibit vastly different conductivity values, making it challenging to separate intrinsic catalytic activities from internal transport limitations. Here, we systematically decouple the limitations arising from electrical bulk resistivity, contact resistances to the catalyst support, and intrinsic OER catalytic properties using a systematic epitaxial thin film model catalyst approach. We investigate the influence of the resistivity of the three perovskite oxides LaNiO3-δ (3.7 × 10-4 Ω cm), La0.67Sr0.33MnO3-δ (2.7 × 10-3 Ω cm), and La0.6Ca0.4FeO3-δ (0.57 Ω·cm) on the observed catalytic activity. We tuned the electron pathway through the catalyst bulk by comparing insulating and conductive substrates. The conducting substrate reduces the electron pathway through the catalyst bulk from the millimeter to nanometer length scale. As we show, for the large electron pathways, the observed catalytic activity scales with resistivity because of a highly inhomogeneous lateral current density distribution. At the same time, even on the conducting substrate (Nb-doped SrTiO3), large contact resistances occur that limit the determination of intrinsic catalytic properties. By inserting interfacial dipole layers (in this case, LaAlO3) we lifted these interface resistances, allowing us to reveal the intrinsic catalytic properties of all examined catalysts. We find that La0.6Ca0.4FeO3-δ and LaNiO3-δ exhibit a similar intrinsic overpotential of 0.36 V at 0.1 mA/cm2, while their resistivities differ by 3 orders of magnitude. This finding shows that optimizing the electron pathway of the OER catalyst can lead the way to find new structure-activity relationships and to identify high-activity catalysts even if the electronic resistance is high.

Synergistic Interplay between Fe-Based Perovskite Oxides and Co in Electrolyte for Efficient Oxygen Evolution Reaction

Perovskite oxides have been extensively investigated as active electrocatalysts for the oxygen evolution reaction (OER) in alkaline solution. While the OER activity of some perovskite oxides is positively influenced by Fe ions in the electrolyte, the impact of other transition metal ions in the electrolyte remains unclear. In this study, we compared the influence of Co ions intentionally added to the electrolyte on the OER activities of two Fe-based perovskite oxides (Ba0.5Sr0.5FeO3-δ and LaFeO3). While the OER activity of Ba0.5Sr0.5FeO3-δ is significantly enhanced by adding Co ions to the electrolyte, LaFeO3 showed little difference in the OER behavior between the Co-free and Co-containing electrolytes. In the case of Ba0.5Sr0.5FeO3-δ, an amorphous layer was formed, and the Co ions from the electrolyte were incorporated on the surface as a result of OER cycling. On the other hand, Co ions were also detected on the surface of LaFeO3, but its crystalline structure remains unchanged during the OER. Our study suggests that synergistic interplay between the perovskite oxides undergoing a structural transformation at the surface and transition metal ions in the electrolyte can improve the OER activity.

Oxidation of interfacial cobalt controls the pH dependence of the oxygen evolution reaction

Transition metal oxides often undergo dynamic surface reconstruction under oxygen evolution reaction conditions to form the active state, which differs in response to the electrolyte pH. The resulting pH dependency of catalytic activity is commonly observed but poorly understood. Herein we track Co oxidation state changes at different pH-directed (hydr)oxide/electrolyte interfaces using operando X-ray absorption spectroscopy characterizations. Combined with in situ electrochemical analyses, we establish correlations between Co redox dynamics, the flat band potential and Co oxidation state changes to explain the pH dependency of the oxygen evolution activity. Alkaline environments provide a low flat band potential that yields a low-potential Co redox transformation, which favours surface reconstruction. Neutral and acidic environments afford an anodic shift of the Co redox transformation that increases the catalytic overpotential. The larger overpotential in neutral environments is attributable to poor Co atom polarizability and slow Co oxidation state changes. These findings reveal that interfacial Co oxidation state changes directly determine the pH dependency of the oxygen evolution reaction activity.

Revealing the Influence of Electron Migration Inside Polymer Electrolyte on Li+ Transport and Interphase Reconfiguration for Li Metal Batteries

The development of highly producible and interfacial compatible in situ polymerized electrolytes for solid-state lithium metal batteries (SSLMBs) have been plagued by insufficient transport kinetics and uncontrollable dendrite propagation. Herein, we seek to explore a rationally designed nanofiber architecture to balance all the criteria of SSLMBs, in which La0.6Sr0.4CoO3-δ (LSC) enriched with high valence-state Co species and oxygen vacancies is developed as electronically conductive nanofillers embedded within ZnO/Zn3N2-functionalized polyimide (Zn-PI) nanofiber framework for the first time, to establish Li+ transport highways for poly vinylene carbonate (PVC) electrolyte and eliminate nonuniform Li deposits. Revealed by characterization and theoretical calculation under electric field, the positive-negative electrical dipole layer in LSC derived from electron migration between Co and O atoms aids in accelerating Li+ diffusion kinetics through densified electric field around filler particle, featuring a remarkable ionic conductivity of 1.50 mS cm-1 at 25 °C and a high Li+ transference number of 0.91 without the risk of electron leakage. Integrating with the preferential sacrifice of ZnO/Zn3N2 on PI nanofiber upon immediate detection of dendritic Li, which takes part in reconfiguring hierarchical SEI chemistry dominated by LixNy/Li-Zn alloy inner layer and LiF outer layer, SSLMBs are further endowed with prolonged cycling lifespan and exceptional rate capability.

Cobalt-free layered perovskites RBaCuFeO5+δ (R = 4f lanthanide) as electrocatalysts for the oxygen evolution reaction

Co-based perovskite oxides are intensively studied as promising catalysts for electrochemical water splitting in an alkaline environment. However, the increasing Co demand by the battery industry is pushing the search for Co-free alternatives. Here we report a systematic study of the Co-free layered perovskite family RBaCuFeO5+δ (R = 4f lanthanide), where we uncover the existence of clear correlations between electrochemical properties and several physicochemical descriptors. Using a combination of advanced neutron and X-ray synchrotron techniques with ab initio DFT calculations we demonstrate and rationalize the positive impact of a large R ionic radius in their oxygen evolution reaction (OER) activity. We also reveal that, in these materials, Fe3+ is the transition metal cation the most prone to donate electrons. We also show that similar R3+/Ba2+ ionic radii favor the incorporation and mobility of oxygen in the layered perovskite structure and increase the number of available O diffusion paths, which have an additional, positive impact on both, the electric conductivity and the OER process. An unexpected result is the observation of a clear surface reconstruction exclusively in oxygen-rich samples (δ > 0), a fact that could be related to their superior OER activity. The encouraging intrinsic OER values obtained for the most active electrocatalyst (LaBaCuFeO5.49), together with the possibility of industrially producing this material in nanocrystalline form should inspire the design of other Co-free oxide catalysts with optimal properties for electrochemical water splitting.

Electrocatalytic Mechanisms for an Oxygen Evolution Reaction at a Rhombohedral Boron Monosulfide Electrode/Alkaline Medium Interface

Rhombohedral boron monosulfide (r-BS) with a layer stacking structure is a promising electrocatalyst for an oxygen evolution reaction (OER) within an alkaline solution. We investigated the catalytic mechanisms at the r-BS electrode/alkaline medium interface for an OER using hybrid solvation theory based on the first-principles method combined with classical solution theory. In this study, we elucidate the activities of the OER at the outermost r-BS sheet with and without various surface defects. The Gibbs free energies along the OER path indicate that the boron vacancies at the first and second layers of the r-BS surface (VB1 and VB2) can promote the OER. However, we found that the VB1 is easily occupied by the oxygen atom during the OER, degrading its electrocatalytic performance. In contrast, VB2 is suitable for the active site of the OER due to its structure stability. Next, we applied a bias voltage with the OER potential to the r-BS electrode. The bias voltage incorporates the positive excess surface charge into pristine r-BS and VB2, which can be understood by the relationship between the OER potential and potentials of zero charge at the r-BS electrode. Because the OH- ions are the starting point of the OER, the positively charged surface is kinetically favorable for the electrocatalyst owing to the attractive interaction with the OH- ions. Finally, we qualitatively discuss the flat-band potential at a semiconductor/alkaline solution interface. It suggests that p-type carrier doping could promote the catalytic performance of r-BS. These results explain the previous measurement of the OER performance with the r-BS-based electrode and provide valuable insights into developing a semiconductor electrode/water interface.

Research Progress of Perovskite-Based Bifunctional Oxygen Electrocatalyst in Alkaline Conditions

In light of the depletion of conventional energy sources, it is imperative to conduct research and development on sustainable alternative energy sources. Currently, electrochemical energy storage and conversion technologies such as fuel cells and metal-air batteries rely heavily on precious metal catalysts like Pt/C and IrO2, which hinders their sustainable commercial development. Therefore, researchers have devoted significant attention to non-precious metal-based catalysts that exhibit high efficiency, low cost, and environmental friendliness. Among them, perovskite oxides possess low-cost and abundant reserves, as well as flexible oxidation valence states and a multi-defect surface. Due to their advantageous structural characteristics and easily adjustable physicochemical properties, extensive research has been conducted on perovskite-based oxides. However, these materials also exhibit drawbacks such as poor intrinsic activity, limited specific surface area, and relatively low apparent catalytic activity compared to precious metal catalysts. To address these limitations, current research is focused on enhancing the physicochemical properties of perovskite-based oxides. The catalytic activity and stability of perovskite-based oxides in Oxygen Reduction Reaction/Oxygen Evolution Reaction (ORR/OER) can be enhanced using crystallographic structure tuning, cationic regulation, anionic regulation, and nano-processing. Furthermore, extensive research has been conducted on the composite processing of perovskite oxides with other materials, which has demonstrated enhanced catalytic performance. Based on these different ORR/OER modification strategies, the future challenges of perovskite-based bifunctional oxygen electrocatalysts are discussed alongside their development prospects.

Designing Oxide Catalysts for Oxygen Electrocatalysis: Insights from Mechanism to Application

The electrochemical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are fundamental processes in a range of energy conversion devices such as fuel cells and metal-air batteries. ORR and OER both have significant activation barriers, which severely limit the overall performance of energy conversion devices that utilize ORR/OER. Meanwhile, ORR is another very important electrochemical reaction involving oxygen that has been widely investigated. ORR occurs in aqueous solutions via two pathways: the direct 4-electron reduction or 2-electron reduction pathways from O2 to water (H2O) or from O2 to hydrogen peroxide (H2O2). Noble metal electrocatalysts are often used to catalyze OER and ORR, despite the fact that noble metal electrocatalysts have certain intrinsic limitations, such as low storage. Thus, it is urgent to develop more active and stable low-cost electrocatalysts, especially for severe environments (e.g., acidic media). Theoretically, an ideal oxygen electrocatalyst should provide adequate binding to oxygen species. Transition metals not belonging to the platinum group metal-based oxides are a low-cost substance that could give a d orbital for oxygen species binding. As a result, transition metal oxides are regarded as a substitute for typical precious metal oxygen electrocatalysts. However, the development of oxide catalysts for oxygen reduction and oxygen evolution reactions still faces significant challenges, e.g., catalytic activity, stability, cost, and reaction mechanism. We discuss the fundamental principles underlying the design of oxide catalysts, including the influence of crystal structure, and electronic structure on their performance. We also discuss the challenges associated with developing oxide catalysts and the potential strategies to overcome these challenges.

Inverse 'intra-lattice' charge transfer in nickel-molybdenum dual electrocatalysts regulated by under-coordinating the molybdenum center

The prevalence of intermetallic charge transfer is a marvel for fine-tuning the electronic structure of active centers in electrocatalysts. Although Pauling electronegativity is the primary deciding factor for the direction of charge transfer, we report an unorthodox intra-lattice 'inverse' charge transfer from Mo to Ni in two systems, Ni₇₃Mo alloy electrodeposited on Cu nanowires and NiMo-hydroxide (Ni : Mo = 5 : 1) on Ni foam. The inverse charge transfer deciphered by X-ray absorption fine structure studies and X-ray photoelectron spectroscopy has been understood by the Bader charge and projected density of state analyses. The undercoordinated Mo-center pushes the Mo 4d-orbitals close to the Fermi energy in the valence band region while Ni 3d-orbitals lie in the conduction band. Since electrons are donated from the electron-rich Mo-center to the electron-poor Ni-center, the inverse charge transfer effect navigates the Mo-center to become positively charged and vice versa. The reverse charge distribution in Ni₇₃Mo accelerates the electrochemical hydrogen evolution reaction in alkaline and acidic media with 0.35 and 0.07 s^-1 turnover frequency at -33 ± 10 and -54 ± 8 mV versus the reversible hydrogen electrode, respectively. The corresponding mass activities are 10.5 ± 2 and 2.9 ± 0.3 A g^-1 at 100, and 54 mV overpotential, respectively. Anodic potential oxidizes the Ni-center of NiMo-hydroxide for alkaline water oxidation with 0.43 O₂ s^-1 turnover frequency at 290 mV overpotential. This extremely durable homologous couple achieves water and urea splitting with cell voltages of 1.48 ± 0.02 and 1.32 ± 0.02 V, respectively, at 10 mA cm^-2.

Correlation between oxygen evolution reaction activity and surface compositional evolution in epitaxial La0.5Sr0.5Ni1-xFexO3-δ thin films

Water electrolysis can use renewable electricity to produce green hydrogen, a portable fuel and sustainable chemical precursor. Improving electrolyzer efficiency hinges on the activity of the oxygen evolution reaction (OER) catalyst. Earth-abundant, ABO₃-type perovskite oxides offer great compositional, structural, and electronic tunability, with previous studies showing compositional substitution can increase the OER activity drastically. However, the relationship between the tailored bulk composition and that of the surface, where OER occurs, remains unclear. Here, we study the effects of electrochemical cycling on the OER activity of La_0.5Sr_0.5Ni_1-xFe_xO_3-δ (x = 0-0.5) epitaxial films grown by oxide molecular beam epitaxy as a model Sr-containing perovskite oxide. Electrochemical testing and surface-sensitive spectroscopic analyses show Ni segregation, which is affected by electrochemical history, along with surface amorphization, coupled with changes in OER activity. Our findings highlight the importance of surface composition and electrochemical cycling conditions in understanding OER performance, suggesting common motifs of the active surface with high surface area systems.

Nickel-doped lanthanum cerate nanomaterials as highly active electrocatalysts

The efficient oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalyst materials are crucial in the energy research domain due to their tunability. Structural modification in perovskites such as lanthanum cerates (LaCeO₃) upon doping at A or B sites significantly affects the surface activity and enhances the catalysis efficacy. Herein, B-site nickel-doped lanthanum cerate (LaCe_1-xNi_xO_3±δ) nanopowders were applied as ORR indicators in high-temperature electrochemical impedance spectroscopy for solid-oxide fuel cell (SOFC) tests and in cyclic voltammetric OER investigations in alkaline medium. The integration into SOFC applications, via solid-state EIS in a co-pressed three-layered cell with LCNiO as cathode, is investigated in an oxygen-methane environment and reveals augmented conductivity with temperatures of 700-850°C. The higher electrokinetic parameters-including diffusion coefficients, D_o heterogeneous rate constant, k_o, and peak current density for OER in KOH-methanol at a LCNiO-9-modified glassy carbon electrode-serve as robust gauges of catalytic performance. CV indicators and EIS conductivities of LaCe_1-xNi_xO_3±δ nanomaterials indicate promising potencies for electrocatalytic energy applications.

Probing Dynamic Self-Reconstruction on Perovskite Fluorides toward Ultrafast Oxygen Evolution

Exploring low cost, highly active, and durable electrocatalysts for oxygen evolution reaction (OER) is of prime importance to boost energy conversion efficiency. Perovskite fluorides are emerging as alternative electrocatalysts for OER, however, their intrinsically active sites during real operation are still elusive. Herein, the self-reconstruction on newly designed NiFe coupled perovskite fluorides during OER process is demonstrated. In situ Raman spectroscopy, ex situ X-ray absorption spectroscopy, and theoretical calculation reveal that Fe incorporation can significantly activate the self-reconstruction of perovskite fluorides and efficiently lower the energy barrier of OER. Benefiting from self-reconstruction and low energy barrier, the KNi0.8 Fe0.2 F3 @nickel foam (KNFF2@NF) electrocatalyst delivers an ultralow overpotential of 258 mV to afford 100 mA cm-2 and an excellent durability for 100 h, favorably rivaling most the state-of-the-art OER electrocatalysts. This protocol provides the fundamental understanding on OER mechanism associated with surface reconstruction for perovskite fluorides.

Activity-Stability Relationships in Oxide Electrocatalysts for Water Electrolysis

The oxygen evolution reaction (OER) is one of the key kinetically limiting half reactions in electrochemical energy conversion. Model epitaxial catalysts have emerged as a platform to identify structure-function-relationships at the atomic level, a prerequisite to establish advanced catalyst design rules. Previous work identified an inverse relationship between activity and the stability of noble metal and oxide OER catalysts in both acidic and alkaline environments: The most active catalysts for the anodic OER are chemically unstable under reaction conditions leading to fast catalyst dissolution or amorphization, while the most stable catalysts lack sufficient activity. In this perspective, we discuss the role that epitaxial catalysts play in identifying this activity-stability-dilemma and introduce examples of how they can help overcome it. After a brief review of previously observed activity-stability-relationships, we will investigate the dependence of both activity and stability as a function of crystal facet. Our experiments reveal that the inverse relationship is not universal and does not hold for all perovskite oxides in the same manner. In fact, we find that facet-controlled epitaxial La_0.6Sr_0.4CoO_3-δ catalysts follow the inverse relationship, while for LaNiO_3-δ, the (111) facet is both the most active and the most stable. In addition, we show that both activity and stability can be enhanced simultaneously by moving from La-rich to Ni-rich termination layers. These examples show that the previously observed inverse activity-stability-relationship can be overcome for select materials and through careful control of the atomic arrangement at the solid-liquid interface. This realization re-opens the search for active and stable catalysts for water electrolysis that are made from earth-abundant elements. At the same time, these results showcase that additional stabilization via material design strategies will be required to induce a general departure from inverse stability-activity relationships among the transition metal oxide catalysts to ultimately grant access to the full range of available oxides for OER catalysis.

Separating the Effects of Band Bending and Covalency in Hybrid Perovskite Oxide Electrocatalyst Bilayers for Water Electrolysis

The Co-O covalency in perovskite oxide cobaltites such as La_1-xSr_xCoO₃ is believed to impact the electrocatalytic activity during electrochemical water splitting at the anode where the oxygen evolution reaction (OER) takes place. Additionally, space charge layers through band bending at the interface to the electrolyte may affect the electron transfer into the electrode, complicating the analysis and identification of true OER activity descriptors. Here, we separate the influence of covalency and band bending in hybrid epitaxial bilayer structures of highly OER-active La_0.6Sr_0.4CoO₃ and undoped and less-active LaCoO₃. Ultrathin LaCoO₃ capping layers of 2-8 unit cells on La_0.6Sr_0.4CoO₃ show intermediate OER activity between La_0.6Sr_0.4CoO₃ and LaCoO₃ evidently caused by the increased surface Co-O covalency compared to single LaCoO₃ as detected by X-ray photoelectron spectroscopy. A Mott-Schottkyanalysis revealed low flat band potentials for different LaCoO₃ capping layer thicknesses, indicating that no limiting extended space charge layer exists under OER conditions as all catalyst bilayer films exhibited hole accumulation at the surface. The combined X-ray photoelectron spectroscopy and Mott-Schottky analysis thus enables us to differentiate between the influence of the covalency and intrinsic space charge layers, which are indistinguishable in a single physical or electrochemical characterization. Our results emphasize the prominent role of transition metal oxygen covalency in perovskite electrocatalysts and introduce a bilayer approach to fine-tune the surface electronic structure.

Correlating Orbital Composition and Activity of LaMnxNi1-xO3 Nanostructures toward Oxygen Electrocatalysis

The atomistic rationalization of the activity of transition metal oxides toward oxygen electrocatalysis is one of the most complex challenges in the field of electrochemical energy conversion. Transition metal oxides exhibit a wide range of structural and electronic properties, which are acutely dependent on composition and crystal structure. So far, identifying one or several properties of transition metal oxides as descriptors for oxygen electrocatalysis remains elusive. In this work, we performed a detailed experimental and computational study of LaMn_xNi_1–xO₃ perovskite nanostructures, establishing an unprecedented correlation between electrocatalytic activity and orbital composition. The composition and structure of the single-phase rhombohedral oxide nanostructures are characterized by a variety of techniques, including X-ray diffraction, X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and electron microscopy. Systematic electrochemical analysis of pseudocapacitive responses in the potential region relevant to oxygen electrocatalysis shows the evolution of Mn and Ni d-orbitals as a function of the perovskite composition. We rationalize these observations on the basis of electronic structure calculations employing DFT with HSE06 hybrid functional. Our analysis clearly shows a linear correlation between the OER kinetics and the integrated density of states (DOS) associated with Ni and Mn 3d states in the energy range relevant to operational conditions. In contrast, the ORR kinetics exhibits a second-order reaction with respect to the electron density in Mn and Ni 3d states. For the first time, our study identifies the relevant DOS dominating both reactions and the importance of understanding orbital occupancy under operational conditions.

Activation of molecular oxygen over Mn-doped La2CuO4 perovskite for direct epoxidation of propylene

The synergetic interaction between manganese and copper in LaMn0.5Cu0.5O3 significantly promoted the epoxidation of propylene at lower temperature by converting the active sites from oxygen vacancies to Cu active sites of Cu–O–Mn.

Carbonaceous Oxygen Evolution Reaction Catalysts: From Defect and Doping-Induced Activity over Hybrid Compounds to Ordered Framework Structures

Oxygen evolution reaction (OER) is expected to be of great importance for the future energy conversion and storage in form of hydrogen by water electrolysis. Besides the traditional noble-metal or transition metal oxide-based catalysts, carbonaceous electrocatalysts are of great interest due to their huge structural and compositional variety and unrestricted abundance. This review provides a summary of recent advances in the field of carbon-based OER catalysts ranging from "pure" or unintentionally doped carbon allotropes over heteroatom-doped carbonaceous materials and carbon/transition metal compounds to metal oxide composites where the role of carbon is mainly assigned to be a conductive support. Furthermore, the review discusses the recent developments in the field of ordered carbon framework structures (metal organic framework and covalent organic framework structures) that potentially allow a rational design of heteroatom-doped 3D porous structures with defined composition and spatial arrangement of doping atoms to deepen the understanding on the OER mechanism on carbonaceous structures in the future. Besides introducing the structural and compositional origin of electrochemical activity, the review discusses the mechanism of the catalytic activity of carbonaceous materials, their stability under OER conditions, and potential synergistic effects in combination with metal (or metal oxide) co-catalysts.

Nickel Iron Phosphide/Phosphate as an Oxygen Bifunctional Electrocatalyst for High-Power-Density Rechargeable Zn-Air Batteries

The evolution of an effective oxygen electrocatalyst is of great importance for the widespread application of Zn-air batteries but remains an immense challenge. Thus, an efficient catalyst toward the oxygen evolution reaction and oxygen reduction reaction (OER and ORR) is highly essential for high-performance Zn-air batteries. Here, we have reported bifunctional nickel iron phosphide/phosphate (NiFeP/Pi) catalysts with various Ni/Fe ratios toward oxygen electrocatalysis in alkaline media. These catalysts are highly active toward OER and ORR, wherein NiFe(1:2)P/Pi exhibits a low OER overpotential of 0.21 V at 10 mA cm-2 and a high ORR onset potential (0.98 V vs RHE) with the lowest potential difference (ΔE = E10 - E1/2) of 0.62 V, which surpasses that of the benchmark Pt/C and RuO2 catalyst as well as those of most previously reported bifunctional catalysts. Furthermore, the NiFe(1:2)P/Pi-based Zn-air battery demonstrates a very high power density of 395 mW cm-2 and outstanding discharge capacity of 900 mAh g-1@10 mA cm-2 along with steady cyclability, maintaining 98% of the round trip efficiency over 300 cycles. These results are helpful for a good understanding of the composition-activity relation with a certain band gap toward high-performance Zn-air batteries.

Structural Transformation of Heterogeneous Materials for Electrocatalytic Oxygen Evolution Reaction

Electrochemical water splitting for hydrogen generation is a promising pathway for renewable energy conversion and storage. One of the most important issues for efficient water splitting is to develop cost-effective and highly efficient electrocatalysts to drive sluggish oxygen-evolution reaction (OER) at the anode side. Notably, structural transformation such as surface oxidation of metals or metal nonoxide compounds and surface amorphization of some metal oxides during OER have attracted growing attention in recent years. The investigation of structural transformation in OER will contribute to the in-depth understanding of accurate catalytic mechanisms and will finally benefit the rational design of catalytic materials with high activity. In this Review, we provide an overview of heterogeneous materials with obvious structural transformation during OER electrocatalysis. To gain insight into the essence of structural transformation, we summarize the driving forces and critical factors that affect the transformation process. In addition, advanced techniques that are used to probe chemical states and atomic structures of transformed surfaces are also introduced. We then discuss the structure of active species and the relationship between catalytic performance and structural properties of transformed materials. Finally, the challenges and prospects of heterogeneous OER electrocatalysis are presented.

Exceptionally Robust Face-Sharing Motifs Enable Efficient and Durable Water Oxidation

Corner-sharing oxides usually suffer from structural reconstruction during the bottleneck oxygen-evolution reaction (OER) in water electrolysis. Therefore, introducing dynamically stable active sites in an alternative structure is urgent but challenging. Here, 1D 5H-polytype Ba₅ Bi_0.25 Co_3.75 FeO_{14- δ} oxide with face-sharing motifs is identified as a highly active and stable candidate for alkaline OER. Benefiting from the stable face-sharing motifs with three couples of combined bonds, Ba₅ Bi_0.25 Co_3.75 FeO_{14- δ} can maintain its local structures even under high OER potentials as evidenced by fast operando spectroscopy, contributing to a negligible performance degradation over 110 h. Besides, the higher Co valence and smaller orbital bandgap in Ba₅ Bi_0.25 Co_3.75 FeO_{14- δ} endow it with a much better electron transport ability than its corner-sharing counterpart, leading to a distinctly reduced overpotential of 308 mV at 10 mA cm^-2 in 0.1 m KOH. Further mechanism studies show that the short distance between lattice-oxygen sites in face-sharing Ba₅ Bi_0.25 Co_3.75 FeO_{14- δ} can accelerate the deprotonation step (*OOH + OH^-  = *OO + H₂ O + e^- ) via a steric inductive effect to promote lattice-oxygen participation. In this work, not only is a new 1D face-sharing oxide with impressive OER performance discovered, but also a rational design of dynamic stable and active sites for sustainable energy systems is inaugurated.

Development of Perovskite Oxide-Based Electrocatalysts for Oxygen Evolution Reaction

Perovskite oxides are studied as electrocatalysts for oxygen evolution reactions (OER) because of their low cost, tunable structure, high stability, and good catalytic activity. However, there are two main challenges for most perovskite oxides to be efficient in OER, namely less active sites and low electrical conductivity, leading to limited catalytic performance. To overcome these intrinsic obstacles, various strategies are developed to enhance their catalytic activities in OER. In this review, the recent developments of these strategies is comprehensively summarized and systematically discussed, including composition engineering, crystal facet control, morphology modulation, defect engineering, and hybridization. Finally, perspectives on the design of perovskite oxide-based electrocatalysts for practical applications in OER are given.

Correlation between Oxygen Vacancies and Oxygen Evolution Reaction Activity for a Model Electrode: PrBaCo2 O5+δ

The role of the perovskite lattice oxygen in the oxygen evolution reaction (OER) is systematically studied in the PrBaCo₂ O_5+δ family. The reduced number of physical/chemical variables combined with in-depth characterizations such as neutron dif-fraction, O K-edge X-ray absorption spectroscopy (XAS), electron energy loss spectroscopy (EELS), magnetization and scanning transmission electron microscopy (STEM) studies, helps investigating the complex correlation between OER activity and a single perovskite property, such as the oxygen content. Larger amount of oxygen vacancies appears to facilitate the OER, possibly contributing to the mechanism involving the oxidation of lattice oxygen, i.e., the lattice oxygen evolution reaction (LOER). Furthermore, not only the number of vacancies but also their local arrangement in the perovskite lattice influences the OER activity, with a clear drop for the more stable, ordered stoichiometry.

Elucidating intrinsic contribution of d-orbital states to oxygen evolution electrocatalysis in oxides

Although numerous studies on oxide catalysts for an efficient oxygen evolution reaction have been carried out to compare their catalytic performance and suggest new compositions, two significant constraints have been overlooked. One is the difference in electronic conduction behavior between catalysts (metallic versus insulating) and the other is the strong crystallographic surface orientation dependence of the catalysis in a crystal. Consequently, unless a comprehensive comparison of the oxygen-evolution catalytic activity between samples is made on a crystallographically identical surface with sufficient electron conduction, misleading interpretations on the catalytic performance and mechanism may be unavoidable. To overcome these limitations, we utilize both metallic (001) LaNiO₃ epitaxial thin films together with metal dopants and semiconducting (001) LaCoO₃ epitaxial thin films supported with a conductive interlayer. We identify that Fe, Cr, and Al are beneficial to enhance the catalysis in LaNiO₃ although their perovskite counterparts, LaFeO₃, LaCrO₃, and LaAlO₃, with a large bandgap are inactive. Furthermore, semiconducting LaCoO₃ is found to have more than one order higher activity than metallic LaNiO₃, in contrast to previous reports. Showing the importance of facilitating electron conduction, our work highlights the impact of the near-Fermi-level d-orbital states on the oxygen-evolution catalysis performance in perovskite oxides.

Towards Experimental Handbooks in Catalysis

The “Seven Pillars” of oxidation catalysis proposed by Robert K. Grasselli represent an early example of phenomenological descriptors in the field of heterogeneous catalysis. Major advances in the theoretical description of catalytic reactions have been achieved in recent years and new catalysts are predicted today by using computational methods. To tackle the immense complexity of high-performance systems in reactions where selectivity is a major issue, analysis of scientific data by artificial intelligence and data science provides new opportunities for achieving improved understanding. Modern data analytics require data of highest quality and sufficient diversity. Existing data, however, frequently do not comply with these constraints. Therefore, new concepts of data generation and management are needed. Herein we present a basic approach in defining best practice procedures of measuring consistent data sets in heterogeneous catalysis using “handbooks”. Selective oxidation of short-chain alkanes over mixed metal oxide catalysts was selected as an example.

An electrochemically reversible lattice with redox active A-sites of double perovskite oxide nanosheets to reinforce oxygen electrocatalysis

The catalyst surface undergoes reversible structural changes while influencing the rate of redox reactions, the atomistic structural details of which are often overlooked when the key focus is to enhance the catalytic activity and reaction yield. We achieve chemical synthesis of ∼5 unit cell thick double perovskite oxide nanosheets (NSs) and demonstrate their precise structural reversibility while catalyzing the successive oxygen evolution and reduction reactions (OER/ORR). 4.1 nm thick A-site ordered BaPrMn1.75Co0.25O5+δ (δ = 0.06-0.17) NSs with oxygen deficient PrO x terminated layers have flexible oxygen coordination of Pr3+ ions, which promotes the redox processes. When subjected to systematic oxidation and reduction cycles by cyclic voltammetry under small electrochemical bias, the PrO1.8 phase appears and disappears alternately at the NS surface, due to the intake and release of oxygen, respectively. The structural reversibility is attributed to the two-dimensional morphology and the A-site terminated surface with flexible anion stoichiometry. Although the underlying B-site cations are well-known active sites, this is the first demonstration of A(Pr3+)-site cations influencing the activity by reversibly altering their oxygen coordination. Higher Co-doping thwarts the NS formation, affecting the catalytic performance. The facile OER/ORR activity of the thickness-tunable NSs has larger implications as a bifunctional air-electrode material for metal-air batteries and fuel cells.

Tuning the Co Oxidation State in Ba0.5Sr0.5Co0.8Fe0.2O3-δ by Flame Spray Synthesis Towards High Oxygen Evolution Reaction Activity

The perovskite-type oxide Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) is known as a highly active and stable oxygen evolution reaction (OER) electrocatalyst composited out of non-noble metals. The possibility of using the scalable flame spray synthesis (FSS) technique for the production of BSCF nanoparticles intensified the interest in this material for a future application in an alkaline water electrolyzer. A possible scale-up would require the optimization of the synthesis parameters to maximize the production rate. To further understand the influence of the synthesis parameters of the tunable FSS on the OER activity of BSCF, a systematic study was carried out by producing BSCF with different total metal concentrations (CTM), flow rates of the precursor solution (FRPS) and of the dispersion gas (FRDG). This study reveals that all three parameters have a direct impact on the OER activity of BSCF—measured in a rotating disc electrode (RDE) setup—due to the controllability of the initial Co and Fe oxidation state—indicated by X-ray absorption spectroscopy (XAS) measurements—and with that also of the oxygen vacancy concentration in the as-synthesized BSCF. This controllability enables the optimization of the OER activity of BSCF and emphasizes the importance of having Co in a lower initial oxidation state for reaching a high electrocatalytic performance.

Toward Efficient Electrocatalytic Oxygen Evolution: Emerging Opportunities with Metallic Pyrochlore Oxides for Electrocatalysts and Conductive Supports

The design of active and stable electrocatalysts for oxygen evolution reaction is a key enabling step toward efficient utilization of renewable energy. Along with efforts to develop high-performance electrocatalysts for oxygen evolution reaction, pyrochlore oxides have emerged as highly active and stable materials that function as catalysts as well as conductive supports for hybrid catalysts. The compositional flexibility of pyrochlore oxide provides many opportunities to improve electrocatalytic performance by manipulating material structures and properties. In this Outlook, we first discuss the recent advances in developing metallic pyrochlore oxides as oxygen evolution catalysts, along with elucidation of their reaction mechanisms, and then introduce an emerging area of using pyrochlore oxides as conductive supports to design hybrid catalysts to further improve the OER activity. Finally, the remaining challenges and emerging opportunities for pyrochlore oxides as electrocatalysts and conductive supports are discussed.

Nanoscale nickel–iron nitride-derived efficient electrochemical oxygen evolution catalysts

Ni₃FeN/Ni heterostructures are preparedviachemical etching followed by a nitridation process, and thein situgenerated NiFeOOH/Ni₃FeN/Ni exhibits outstanding OER activity.

Co/Fe Oxyhydroxides Supported on Perovskite Oxides as Oxygen Evolution Reaction Catalyst Systems

Co/Fe oxyhydroxide catalysts have been deposited onto the surface of amorphous carbons or different perovskite oxides. By performing electrochemical characterizations and operando X-ray absorption spectroscopy measurements, novel insights into Co/Fe oxyhydroxide catalysts and their interactions with perovskite oxides have been revealed. The addition of Fe into Co oxyhydroxide catalysts greatly enhances the oxygen evolution reaction (OER) activity by stabilizing the Co cations into a lower oxidation state under operative conditions compared to the case of undoped Co oxyhydroxide. A beneficial Co/Fe electronic interaction for OER can also be achieved by depositing Co oxyhydroxide on Fe-containing oxide supports, such as the LaFeO₃ perovskite. Finally, it was found that, despite the lower Fe content in the Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3-δ (BSCF) perovskite structure, Co oxyhydroxides supported on this perovskite exhibit the highest OER activity. Therefore, our findings suggest that perovskite structures presenting a large content of oxygen vacancies and undergoing surface reconstruction, such as BSCF, offer the best interface for Co oxyhydroxides. Finally, profiting from the beneficial Co/Fe electronic interaction and perovskite interface interaction, the highest OER activity has been achieved by depositing Co/Fe oxyhydroxide on the surface of BSCF perovskite.

Screening highly active perovskites for hydrogen-evolving reaction via unifying ionic electronegativity descriptor

Facile and reliable screening of cost-effective, high-performance and scalable electrocatalysts is key for energy conversion technologies such as water splitting. ABO_3-δ perovskites, with rich constitutions and structures, have never been designed via activity descriptors for critical hydrogen evolution reaction (HER). Here, we apply coordination rationales to introduce A-site ionic electronegativity (AIE) as an efficient unifying descriptor to predict the HER activities of 13 cobalt-based perovskites. Compared with A-site structural or thermodynamic parameter, AIE endows the HER activity with the best volcano trend. (Gd_0.5La_0.5)BaCo₂O_5.5+δ predicted from an AIE value of ~2.33 exceeds the state-of-the-art Pt/C catalyst in electrode activity and stability. X-ray absorption and computational studies reveal that the peak HER activities at a moderate AIE value of ~2.33 can be associated with the optimal electronic states of active B-sites via inductive effect in perovskite structure (~200 nm depth), including Co valence, Co-O bond covalency, band gap and O 2p-band position.

Facile and reliable screening of efficient electrocatalysts is important for energy conversion technologies such as water splitting. Here, authors introduce A-site ionic electronegativity as a descriptor to understand the hydrogen-evolution activities of cobalt-based perovskites.

Electronic Percolation Threshold of Self-Standing Ag-LaCoO3 Porous Electrodes for Practical Applications

Perovskite LaCoO3 materials have various applications, from selective permeable membranes and gas sensing devices to water splitting applications. However, the intrinsic electrical resistivity of the perovskite limits the applicative potential. To overcome that, Ag powder was used with LaCoO3 to obtain porous composite electrodes with enhanced conductivities. For that, a series of composite Ag-LaCoO3 powders were prepared into pellets and pre-sintered at various temperatures up to 1000 ∘C. Their structural properties and morphology were investigated by X-ray diffraction and scanning electron microscopy. The electronic transport of compacted specimens was studied by impedance spectroscopy. The results indicate that the presence of Ag acts as pre-sintering additive to obtain porous electrodes, with porosity values as high as 40% at 50 vol. % Ag. Moreover, the overall electrical resistivity of the composite electrodes varied well over four orders of magnitude. The results are discussed within the generalized Bruggeman theory for effective media comprising arbitrarily shaped metallic and semiconducting inclusions.

Atomic-scale perturbation of oxygen octahedra via surface ion exchange in perovskite nickelates boosts water oxidation

A substantial amount of interest has been focused on ABO₃-type perovskite oxides over the past decade as oxygen electrocatalysts. Despite many studies on various compositions, the correlation between the structure of the oxygen octahedra and electrocatalytic property has been overlooked, and there accordingly have been a very limited number of attempts regarding control of atomistic structure. Utilizing epitaxial LnNiO₃ (Ln = La, Pr, Nd) thin films, here we demonstrate that simple electrochemical exchange of Fe in the surface region with several-unit-cell thickness is notably effective to boost the catalytic activity for the oxygen evolution reaction by different orders of magnitude. Furthermore, we directly establish that strong distortion of oxygen octahedra at the angstrom scale is readily induced during the Fe exchange, and that this structural perturbation permits easier charge transfer. The findings suggest that structural alteration can be an efficient approach to achieve exceptional electrocatalysis in crystalline oxides.

While perovskite oxides are well-studied for their oxygen electrocatalysis performances, the impact of oxygen octahedra is less studied. Here, authors show electrochemical exchange of lanthanide nickelate surfaces to distort oxygen octahedra, facilitating charge transfer and improving catalysis.

Fe-Doping in Double Perovskite PrBaCo2(1-x)Fe2xO6-δ: Insights into Structural and Electronic Effects to Enhance Oxygen Evolution Catalyst Stability

Perovskite oxides have been gaining attention for its capability to be designed as an ideal electrocatalyst for oxygen evolution reaction (OER). Among promising candidates, the layered double perovskite—PrBaCo2O6-δ (PBC)—has been identified as the most active perovskite electrocatalyst for OER in alkaline media. For a single transition metal oxide catalyst, the addition of Fe enhances its electrocatalytic performance towards OER. To understand the role of Fe, herein, Fe is incorporated in PBC in different ratios, which yielded PrBaCo2(1-x)Fe2xCo6-δ (x = 0, 0.2 and 0.5). Fe-doped PBCF’s demonstrate enhanced OER activities and stabilities. Operando X-ray absorption spectroscopy (XAS) revealed that Co is more stable in a lower oxidation state upon Fe incorporation by establishing charge stability. Hence, the degradation of Co is inhibited such that the perovskite structure is prolonged under the OER conditions, which allows it to serve as a platform for the oxy(hydroxide) layer formation. Overall, our findings underline synergetic effects of incorporating Fe into Co-based layered double perovskite in achieving a higher activity and stability during oxygen evolution reaction.