H2O2 Oxidation by FeIII-OOH Intermediates and Its Effect on Catalytic Efficiency

Selective formation of high-valent iron in Fenton-like system for emerging contaminants degradation under near-neutral and high-salt conditions

In view of the near-neutral and high-salt conditions, the Fenton technology with hydroxyl radicals (HO•) as the main reactive species is difficult to satisfy the removal of trace emerging contaminants (ECs) in pharmaceutical sewage. Here, a layered double hydroxide FeZn-LDH was prepared, and the selective formation of ≡Fe(IV)=O in Fenton-like system was accomplished by the chemical environment regulation of the iron sites and the pH control of the microregion. The introduced zinc can increase the length of Fe-O bond in the FeZn-LDH shell layer by 0.22 Å compared to that in Fe2O3, which was conducive to the oxygen transfer process between ≡Fe(III) and H2O2, resulting in the ≡Fe(IV)=O formation. Besides, the amphoteric hydroxide Zn(OH)2 can regulate the pH of the FeZn-LDH surface microregion, maintaining reaction pH at around 6.5-7.5, which could avoid the quenching of ≡Fe(IV)=O by H+. On the other hand, owing to the anti-interference of ≡Fe(IV)=O and the near-zero Zeta potential on the FeZn-LDH surface, the trace ECs can also be effectively degraded under high-salt conditions. Consequently, the process of ≡Fe(IV)=O generation in FeZn-LDH system can satisfy the efficient removal of ECs under near-neutral and high-salt conditions.

Structural Insights into the Reaction between Hydrogen Peroxide and Di-iron Complexes at the Ferroxidase Center of Ferritin

The Fe(II) oxidation mechanism in the ferroxidase center of heavy chain ferritin has been studied extensively. However, the actual production of H2O2 was found to be substantially lower than expected at low flux of Fe(II) to ferritin subunits. Here, we demonstrated that H2O2 could interact with the di-iron nuclear center, leading to the production of hydroxyl radicals and oxygen. Two reaction intermediates were captured in the ferroxidase center by using the time-lapse crystallographic techniques in a shellfish ferritin. The crystal structures revealed the binding of H2O2 as a μ -1,2-peroxo-diferric species and the binding of O2 to the diferric structure. This investigation sheds light on the reaction between the di-iron nuclear center and H2O2 and provides insights for the exploitation of metalloenzymes.

Aerobic Oxidation of 5-Hydroxymethylfurfural (HMF) in Aqueous Medium over Fe-Doped-Poly(heptazine imide) Photocatalysts: Unveiling the Bad Role of Hydroxyl Radical Generation on the Catalytic Performance

5-hydroxymethylfurfural (HMF) oxidation in aqueous media using visible photocatalysis is a green and sustainable route for the valorization of lignocellulosic biomass derivatives. Several semiconductors have already been applied for this purpose; however, the use of Poly(heptazine imides), which has high crystallinity and a special cation exchange property that allows the replacement of the cation held between the layers of C3N4 structure by transition metal ions (TM), remains scarce. In this study, PHI(Na) was synthesized using a melamine/NaCl method and used as precursor to prepare metal (Fe, Co, Ni, or Cu)-doped PHI catalysts. The catalysts were tested for selective oxidation of HMF to 2,5-diformylfuran (DFF) in water and O2 atmosphere under blue LED radiation. The catalytic results revealed that the 0.1 wt% PHI(Fe) catalyst is the most efficient photocatalyst while higher Fe loading (1 and 2 wt%) favors the formation of Fe3+ clusters, which are responsible for the drop in HMF oxidation. Moreover, the 0.1 wt% PHI(Fe) photocatalyst has strong oxidative power due to its efficiency in H2O2 production, thus boosting the generation of nonselective hydroxyl radicals (●OH) via different pathways that can destroy HMF. We found that using 50 mM, the highest DFF production rate (393 μmol·h-1·g-1) was obtained in an aqueous medium under visible light radiation.

Peroxymonosulfate Activation by Fe(III)-Picolinate Complexes for Efficient Water Treatment at Circumneutral pH: Fe(III)/Fe(IV) Cycle and Generation of Oxyl Radicals

Improving the reactivity of Fe(III) for activating peroxymonosulfate (PMS) at circumneutral pH is critical to propel the iron-activated PMS processes toward practical wastewater treatment but is yet challenging. Here we employed the complexes of Fe(III) with the biodegradable picolinic acid (PICA) to activate PMS for degradation of selected chlorinated phenols, antibiotics, pharmaceuticals, herbicides, and industrial compounds at pH 4.0-6.0. The FeIII-PICA complexes greatly outperformed the ligand-free Fe(III) and other Fe(III) complexes of common aminopolycarboxylate ligands. In the main activation pathway, the key intermediate is a peroxymonosulfate complex, tentatively identified as PICA-FeIII-OOSO3-, which undergoes O-O homolysis or reacts with FeIII-PICA and PMS to yield FeIV=O and SO4•- without the involvement of commonly invoked Fe(II). PICA-FeIII-OOSO3- can also react directly with certain compounds (chlorophenols and sulfamethoxazole). The relative contributions of PICA-FeIII-OOSO3-, FeIV=O, and SO4•- depend on the structure of target compounds. This work sets an eligible example to enhance the reactivity of Fe(III) toward PMS activation by ligands and sheds light on the previously unrecognized role of the metal-PMS complexes in directing the catalytic cycle and decontamination as well.

Nonheme FeIV═O Complexes Supported by Four Pentadentate Ligands: Reactivity toward H- and O- Atom Transfer Processes

Four new pentadentate N5-donor ligands, [N-(1-methyl-2-imidazolyl)methyl-N-(2-pyridyl)-methyl-N-(bis-2-pyridylmethyl)-amine] (L1), [N-bis(1-methyl-2-imidazolyl)methyl-N-(bis-2-pyridylmethyl)amine] (L2), (N-(isoquinolin-3-ylmethyl)-1,1-di(pyridin-2-yl)-N-(pyridin-2-ylmethyl)methanamine (L3), and N,N-bis(isoquinolin-3-ylmethyl)-1,1-di(pyridin-2-yl)methanamine (L4), have been synthesized based on the N4Py ligand framework, where one or two pyridyl arms of the N4Py parent are replaced by (N-methyl)imidazolyl or N-(isoquinolin-3-ylmethyl) moieties. Using these four pentadentate ligands, the mononuclear complexes [FeII(CH3CN)(L1)]2+ (1a), [FeII(CH3CN)(L2)]2+ (2a), [FeII(CH3CN)(L3)]2+ (3a), and [FeII(CH3CN)(L4)]2+ (4a) have been synthesized and characterized. The half-wave potentials (E1/2) of the complexes become more positive in the order: 2a < 1a < 4a ≤ 3a ≤ [Fe(N4Py)(CH3CN)]2+. The order of redox potentials correlates well with the Fe-Namine distances observed by crystallography, which are 2a > 1a ≥ 4a > 3a ≥ [Fe(N4Py)(CH3CN)]2+. The corresponding ferryl complexes [FeIV(O)(L1)]2+ (1b), [FeIV(O)(L2)]2+ (2b), [FeIV(O)(L3)]2+ (3b), and [FeIV(O)(L4)]2+ (4b) were prepared by the reaction of the ferrous complexes with isopropyl 2-iodoxybenzoate (IBX ester) in acetonitrile. The greenish complexes 3b and 4b were also isolated in the solid state by the reaction of the ferrous complexes in CH3CN with ceric ammonium nitrate in water. Mössbauer spectroscopy and magnetic measurements (using superconducting quantum interference device) show that the four complexes 1b, 2b, 3b, and 4b are low-spin (S = 1) FeIV═O complexes. UV/vis spectra of the four FeIV═O complexes in acetonitrile show typical long-wavelength absorptions of around 700 nm, which are expected for FeIV═O complexes with N4Py-type ligands. The wavelengths of these absorptions decrease in the following order: 721 nm (2b) > 706 nm (1b) > 696 nm (4b) > 695 nm (3b) = 695 nm ([FeIV(O) (N4Py)]2+), indicating that the replacement of the pyridyl arms with (N-methyl) imidazolyl moieties makes L1 and L2 exert weaker ligand fields than the parent N4Py ligand, while the ligand field strengths of L3 and L4 are similar to the N4Py parent despite the replacement of the pyridyl arms with N-(isoquinolin-3-ylmethyl) moieties. Consequently, complexes 1b and 2b tend to be less stable than the parent [FeIV(O)(N4Py)]2+ complex: the half-life sequence at room temperature is 1.67 h (2b) < 16 h (1b) < 45 h (4b) < 63 h (3b) ≈ 60 h ([FeIV(O)(N4Py)]2+). Compared to the parent complex, 1b and 2b exhibit enhanced reactivity in both the oxidation of thioanisole in the oxygen atom transfer (OAT) reaction and the oxygenation of C-H bonds of aromatic and aliphatic substrates, presumed to occur via an oxygen rebound process. Furthermore, the second-order rate constants for hydrogen atom transfer (HAT) reactions affected by the ferryl complexes can be directly related to the C-H bond dissociation energies of a range of substrates that have been studied. Using either IBX ester or H2O2 as an oxidant, all four new FeII complexes display good performance in catalytic reactions involving both HAT and OAT reactions.

Fe(II) complexes of pyridine-substituted thiosemicarbazone ligands as catalysts for oxidations with hydrogen peroxide

The reaction of three [FeII(TSC)2] complexes, where TSC is a pyridine-substituted thiosemicarbazone of the HDpT or HBpT families, with H2O2 in acetonitrile solution does not result in the accumulation of the corresponding [FeIII(TSC)2]+ complexes. Instead, a mixture of diamagnetic low-spin FeII species is generated. According to the MS spectra, those species result from the sequential addition of up to five oxygen atoms to the complex. This capability for the addition of oxygen atoms suggested that oxygen atom transfer to external substrates may be possible, and these TSC complexes were tested in the oxidation of thioanisole and styrene with H2O2. As hypothesized, the complexes are active in both the oxidation of thioanisole to its sulfoxide and styrene to benzaldehyde, with time scales indicating the participation of the species containing added oxygen atoms. Interestingly, the free thiosemicarbazone ligands and the [Zn(Dp44mT)2] complex also catalyse the selective sulfoxidation of thioanisole, but they are ineffective in catalysing styrene oxidation to benzaldehyde. These findings open up new directions for the development of thiosemicarbazone-based metal catalysts for oxidation processes.

Elusive Active Intermediates and Reaction Mechanisms of ortho-/ipso-Hydroxylation of Benzoic Acid by Hydrogen Peroxide Mediated by Bioinspired Iron(II) Catalysts

Aromatic hydroxylation of benzoic acids (BzOH) to salicylates and phenolates is fundamentally interesting in industrial chemistry. However, key mechanistic uncertainties and dichotomies remain after decades of effort. Herein, the elusive mechanism of the competitive ortho-/ipso-hydroxylation of BzOH by H2O2 mediated by a nonheme iron(II) catalyst was comprehensively investigated using density functional theory calculations. Results revealed that the long-postulated FeV(O)(anti-BzO) oxidant is an FeIV(O)(anti-BzO•) species 2 (anti- and syn- are defined by the orientation of the carboxyl oxygen of BzO to the oxo), which rules out the noted two-oxidant mechanism proposed previously. We propose a new mechanism in which, following the formation of an FeV(O)(syn-BzO) species (3) and its electromer FeIV(O)(syn-BzO•) (3'), 3/3' either converts to salicylate and phenolate via intramolecular self-hydroxylation (route A) or acts as an oxidant to oxygenate another BzOH to generate the same products (route B). In route A, the rotation of the BzO group along the C-O bond forms 2, in which the BzO group is orientated by π-π stacking interactions. An electrophilic ipso-addition forms a phenolate by concomitant decarboxylation or an ortho-attack forms a cationic complex, which readily undergoes an NIH shift and a BzOH-assisted proton shift to form a salicylate. In route B, 3 oxidizes an additional BzOH molecule directed by hydrogen bonding and π-π stacking interactions. In both routes, selectivity is determined by the chemical property of the BzO ring. These mechanistic findings provide a clear mechanistic scenario and enrich the knowledge of hydroxylation of aromatic acids.

Surface-Mediated Production of Complexed •OH Radicals and FeO Species as a Mechanism for Iron Oxide Peroxidase-Like Nanozymes

Fe₃ O₄ nanoparticles (NPs) with intrinsic peroxidase-like properties have attracted significant interest, although limited information is available on the definite catalytic mechanism. Here, it is shown that both complexed hydroxyl radicals (•OH) and high-valent FeO species are attributed primarily to the peroxidase-like catalytic activity of Fe₃ O₄ NPs under acid conditions rather than only being caused by free •OH radicals generated through the iron-driven Fenton/Haber-Weiss reactions as previously thought. The low energy barrier of OO bond dissociation of H₂ O₂ /•OOH (0.14 eV) and the high oxidation activity of surface FeO (0 eV) due to the reduced state of Fe on the surface of Fe₃ O₄ NPs thermodynamically favor both the •OH and FeO pathways. By contrast, high-valent FeO species are the key intermediates in the catalytic cycles of natural peroxidase enzymes. Moreover, it is demonstrated that the enzyme-like activity of Fe₃ O₄ NPs can be rationally regulated by modulating the size, surface structure, and valence of active metal atoms in the light of this newly proposed nanozyme catalytic mechanism.

Heterolytic O-O Bond Cleavage Upon Single Electron Transfer to a Nonheme Fe(III)-OOH Complex

The one-electron reduction of the nonheme iron(III)-hydroperoxo complex, [Fe^III (OOH)(L₅ ² )]²⁺ (L₅ ² =N-methyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine), carried out at -70 °C results in the release of dioxygen and in the formation of [Fe^II (OH)(L₅ ² )]⁺ following a bimolecular process. This reaction can be performed either with cobaltocene as chemical reductant, or electrochemically. These experimental observations are consistent with the disproportionation of the hydroperoxo group in the putative Fe^II (OOH) intermediate generated upon reduction of the Fe^III (OOH) starting complex. One plausible mechanistic scenario is that this disproportionation reaction follows an O-O heterolytic cleavage pathway via a Fe^IV -oxo species.

Revealing *OOH key intermediates and regulating H2O2 photoactivation by surface relaxation of Fenton-like catalysts

Hydrogen peroxide (H₂O₂) molecules play important roles in many green chemical reactions. However, the high activation energy limits their application efficiency, and there is still huge controversy about the activation path of H₂O₂ molecules over the presence of *OOH intermediates. Here, we confirmed the formation of the key species *OOH in the heterogeneous system, via in situ shell-isolated nanoparticle-enhanced Raman spectroscopy (SHINERS), isotope labeling, and theoretical calculation. In addition, we found that compared with *H₂O₂, *OOH was more conducive to the charge transfer behavior with the catalyst and the activation of an O-O bond. Furthermore, we proposed to improve the local coordination structure and electronic density of the YFeO₃ catalyst by regulating the surface relaxation with Ti modification so as to reduce the activation barrier of H₂O₂ and to improve the production efficiency of •OH. As a result, the kinetics rates of the Fenton-like (photo-Fenton) reaction had been significantly increased several times. The •OH free radical activity mechanism and molecular transformation pathways of 4-chloro phenol (4-CP) were also revealed. This may provide a clearer vision for the further study of H₂O₂ activation and suggest a means of designing catalysts for efficient H₂O₂ activation.

Tetrahedral Keggin Core Tunes the Visible Light-Assisted Catalase-Like Activity of Icosahedral Keplerate Shell

In this work, the effect of Keggin polyoxometalates encapsulated in Keplerate {Mo₇₂Fe₃₀} shell (K shell) on the visible light-assisted catalase-like activity (H₂O₂ dismutation) of the resulting core-shell clusters PMo₁₂@K, SiMo₁₂@K, and BW₁₂@K was investigated. Superior photodismutation activity of PMo₁₂@K compared to that of K shell and two other core-shell clusters was discovered. The homogeneity of PMo₁₂@K and its improved oxidative stability, increased redox potential, and reduced band gap caused by a synergistic effect between the Keplerate shell and Keggin core seem reasonable to explain such a superiority. The light-dependent photocatalytic performance of PMo₁₂@K evaluated by action spectra revealed a maximum apparent quantum efficiency (AQY) at 400 nm, demonstrating the visible light-driven photocatalytic reaction. A first-order rate constant of 2 × 10^-4 s^-1 and activation energy of 108.8 kJ mol^-1 alongside a turnover frequency of 0.036 s^-1 and a total turnover number of up to ∼3800 approved the effective photocatalytic activity and improved the oxidative stability of PMo₁₂@K. A nonradical photocatalytic mechanism through a Fe-OOH intermediate was proposed. Thus, the structure, optical activity, and oxidative stability of a host Keplerate-type nanocluster can be tuned significantly by encapsulation of a guest, like "cluster-in-cluster" structures, which opens the scope for introducing new visible light-sensitive hierarchical nanostructures.

Peptidic Scaffolds Enable Rapid and Multivariate Secondary Sphere Evolution for an Abiotic Metallocatalyst

Metalloenzymes have benefited from the iterative process of evolution to achieve the precise arrangements of secondary sphere non-covalent interactions that enhance metal-centered catalysis. Iterative synthesis of scaffolds that display complex secondary sphere elements in abiotic systems can be highly challenging and time-intensive. To overcome this synthetic bottleneck, we developed a highly modular and rapid synthetic strategy, leveraging the efficiency of solid-phase peptide synthesis and conformational control afforded by non-canonical residues to construct a ligand platform displaying up to four unique residues of varying electronics and sterics in the secondary coordination sphere. As a proof-of-concept that peptidic secondary sphere can cooperate with the metal complex, we applied this scaffold to a well-known, modestly active C-H oxidizing Fe catalyst to evolve specific non-covalent interactions that is more than double its catalytic activity. Solution-state NMR structures of several catalyst variants suggest that higher activity is correlated with a hydrophobic pocket above the Fe center that may enhance the formation of a catalyst-substrate complex. Above all, we show that peptides are a convenient, highly modular, and structurally defined ligand platform for creating secondary coordination spheres that comprise multiple, diverse functional groups.

Enhanced Degradation of Micropollutants in a Peracetic Acid-Fe(III) System with Picolinic Acid

Activation of peracetic acid (PAA) with iron species is an emerging advanced oxidation process (AOP). This study investigates the use of the chelating agent picolinic acid (PICA) to extend the pH range and enhance the performance of the PAA-Fe(III) AOP. Compared to the PAA-Fe(III) system, the PAA-Fe(III)-PICA system degrades various micropollutants (MPs: methylene blue, naproxen, sulfamethoxazole, carbamazepine, trimethoprim, diclofenac, and bisphenol-A) much more rapidly at higher pH, achieving almost complete removal of parent compounds within 10 min. PAA significantly outperforms the coexistent H₂O₂ and is the key oxidant for rapid compound degradation. Other chelating agents, EDTA, NTA, citric acid, proline, and nicotinic acid, could not enhance MP degradation in the PAA-Fe(III) system, while 2,6-pyridinedicarboxylic acid with a structure similar to PICA moderately enhanced MP degradation. Experiments with scavengers (tert-butyl alcohol and methyl phenyl sulfoxide) and a probe compound (benzoic acid) confirmed that high-valent iron species [Fe(IV) and/or Fe(V)], rather than radicals, are the major reactive species contributing to MP degradation. The oxidation products of methylene blue, naproxen, and sulfamethoxazole by PAA-Fe(III)-PICA were characterized and supported the proposed mechanism. This work demonstrates that PICA is an effective complexing ligand to assist the Fenton reaction of PAA by extending the applicable pH range and accelerating the catalytic ability of Fe(III).

Second-sphere effects on H2O2 activation by non-heme FeII complexes: role of a phenol group in the [H2O2]-dependent accumulation of FeIVO vs. FeIIIOOH

Redox metalloenzymes achieve very selective oxidation reactions under mild conditions using O2 or H2O2 as oxidants and release harmless side-products like water. Their oxidation selectivity is intrinsically linked to the control of the oxidizing species generated during the catalytic cycle. To do so, a second coordination sphere is used in order to create a pull effect during the activation of O2 or H2O2, thus ensuring a heterolytic O-O bond cleavage. Herein, we report the synthesis and study of a new non-heme FeII complex bearing a pentaazadentate first coordination sphere and a pendant phenol group. Its reaction with H2O2 generates the classical FeIIIOOH species at high H2O2 loading. But at low H2O2 concentrations, an FeIVO species is generated instead. The formation of the latter is directly related to the presence of the 2nd sphere phenol group. Kinetic, variable temperature and labelling studies support the involvement of the attached phenol as a second coordination sphere moiety (weak acid) during H2O2 activation. Our results suggest a direct FeII → FeIVO conversion directed by the 2nd sphere phenol via the protonation of the distal O atom of the FeII/H2O2 adduct leading to a heterolytic O-O bond cleavage.

Intercepting a transient non-hemic pyridine N-oxide Fe(III) species involved in OAT reactions

In the context of bioinspired OAT catalysis, we developed a tetradentate dipyrrinpyridine ligand, a hybrid of hemic and non-hemic models. The catalytic activity of the iron(III) derivative was investigated in the presence of iodosylbenzene. Unexpectedly, MS, EPR, Mössbauer, UV-visible and FTIR spectroscopic signatures supported by DFT calculations provide convincing evidence for the involvement of a relevant Fe^III-O-N_Py active intermediate.

Fe-based single-atom catalysis for oxidizing contaminants of emerging concern by activating peroxides

We prepared a single-atom Fe catalyst supported on an oxygen-doped, nitrogen-rich carbon support (SAFe-OCN) for degrading a broad spectrum of contaminants of emerging concern (CECs) by activating peroxides such as peroxymonosulfate (PMS). In the SAFe-OCN/PMS system, most selected CECs were amenable to degradation and high-valent Fe species were present for oxidation. Moreover, SAFe-OCN showed excellent performance for contaminant degradation in complex water matrices and high stability in oxidation. Specifically, SAFe-OCN, with a catalytic center of Fe coordinated with both nitrogen and oxygen (FeN_xO_4-x), showed 5.13-times increased phenol degradation kinetics upon activating PMS compared to the catalyst where Fe was only coordinated with nitrogen (FeN₄). Molecular simulations suggested that FeN_xO_4-x, compared to FeN₄, was an excellent multiple-electron donor and it could potential-readily form high-valent Fe species upon oxidation. In summary, the single-atom Fe catalyst enables efficient, robust, and sustainable water and wastewater treatment, and molecular simulations highlight that the electronic nature of Fe could play a key role in determining the activity of the single-atom catalyst.

The most reactive iron and manganese complexes with N-pentadentate ligands for dioxygen activation—synthesis, characteristics, applications

The iron and manganese complexes that activate oxygen atom play multiple role in technologically relevant reactions as well as in biological transformations, in which exist in different redox states. Among them, high-valent oxo intermediate seems to be the most important one. Iron, and/or manganese-based processes have found application in many areas, starting from catalysis and sustainable technologies, through DNA oxidative cleavage, to new substances useful in chemotherapeutic drugs. This review is not only the latest detailed list of uses of homogeneous N-pentadentate iron and manganese catalysts for syntheses of valuable molecules with huge applications in green technologies, but also a kind of "a cookbook", collecting "recipes" for the discussed complexes, in which the sources necessary to obtain a full characterization of the compounds are presented. Following the catalytic activity of metalloenzymes, and taking into account the ubiquity of iron and manganese salts, which in combination with properly designed ligands may show similarity to natural systems, the discussed complexes can find application as new anti-cancer drugs. Also, owing to ability of oxygen atom to exchange in reaction with H₂O, they can be successfully applied in photodriven reactions of water oxidation, as well as in chemically regenerated fuel cells as a redox catalyst.

Enhancing Chemo- and Stereoselectivity in C-H Bond Oxygenation with H2O2 by Nonheme High-Spin Iron Catalysts: The Role of Lewis Acid and Multimetal Centers

Spin states of iron often direct the selectivity in oxidation catalysis by iron complexes using hydrogen peroxide (H₂O₂) on an oxidant. While low-spin iron(III) hydroperoxides display stereoselective C-H bond hydroxylation, the reactions are nonstereoselective with high-spin iron(II) catalysts. The catalytic studies with a series of high-spin iron(II) complexes of N4 ligands with H₂O₂ and Sc³⁺ reported here reveal that the Lewis acid promotes catalytic C-H bond hydroxylation with high chemo- and stereoselectivity. This reactivity pattern is observed with iron(II) complexes containing two cis-labile sites. The enhanced selectivity for C-H bond hydroxylation catalyzed by the high-spin iron(II) complexes in the presence of Sc³⁺ parallels that of the low-spin iron catalysts. Furthermore, the introduction of multimetal centers enhances the activity and selectivity of the iron catalyst. The study provides insights into the development of peroxide-dependent bioinspired catalysts for the selective oxygenation of C-H bonds without the restriction of using iron complexes of strong-field ligands.

Insight into the Selective Methylene Oxidation Catalyzed by Mn(CF3-PDP)(SbF6)2/H2O2/CH2ClCO2H) System: A DFT Mechanistic Study

DFT study was employed to gain insight into methylene oxidation catalyzed by Mn(CF₃-PDP)(NCMe)₂ (SbF₆)₂/H₂O₂/HOAc^Cl(OAC^Cl ═OC(O)CH₂Cl). The active catalyst was characterized to be [Mn](O)OAc^Cl ([Mn]═Mn(CF₃-PDP)²⁺) which is generated via a sequence from [Mn] to [Mn]OH to [Mn]OAc^Cl to [Mn]OOH. With the active catalyst, the methylene group is sequentially oxidized to an alcohol and then to a carbonyl group via rebound mechanism. The mechanism explains the observed site selectivity.

In situ electro-organic synthesis of hydroquinone using anisole on MWCNT/Nafion modified electrode surface and its heterogeneous electrocatalytic reduction of toxic Cr(vi) species

Owing to its electro-inactive character, anisole (phenylmethyl ether, PhOCH3) and its related derivatives have been used as electrolytes in electrochemistry. Herein, we report a simple one-step electro-organic conversion of PhOCH3 to hydroquinone (HQ) on a pristine-MWCNT-Nafion modified electrode glassy carbon electrode surface, GCE/Nf-MWCNT@HQ, in pH 2 KCl-HCl solution within 15 min of working time. The chemically modified electrode showed a highly redox-active and well-defined signal at an apparent standard electrode potential, E o' = 0.45 V vs. Ag/AgCl (A2/C2) with a surface excess value, Γ HQ = 2.1 × 10-9 mol cm-2. The formation of surface-confined HQ is confirmed by collective physicochemical and spectroscopic characterizations using TEM, UV-Vis, Raman, FTIR, NMR and GC-MS techniques and with several control experiments. Consent about the mechanism, the 2.1% of intrinsic iron present in the pristine-MWCNT is involved for specific complexation with oxygen donor organic molecule (PhOCH3) and hydroxylation in presence of H2O2 (nucleophilic attack) for HQ-product formation. The GCE/Nf-MWCNT@HQ showed an excellent heterogeneous-electrocatalytic reduction of Cr(vi) species in acidic solution with a linear calibration plot in a range, 5-500 ppm at an applied potential, 0.4 V vs. Ag/AgCl with a detection limit, 230 ppb (S/N = 3; amperometric i-t). As a proof of concept, selective detection of toxic Cr(vi) content in the tannery-waste water has been demonstrated with a recovery value ∼100%.

Simultispin: A versatile graphical user interface for the simulation of solid-state continuous wave EPR spectra

Solid-state continuous wave (cw) electronic paramagnetic resonance (EPR) spectroscopy is particularly suitable for metal complex analysis. Extracting magnetic parameters by simulation is often necessary to describe the electronic structure of the studied molecular compounds that can have various electronic spin states and characterized by different parameters like g-values, hyperfine coupling or zero field splitting values. Easyspin toolbox on MATLAB is a powerful tool, but for the user, it requires spending time with coding and could discourage nonexperts. Facing this context, we have developed a graphical user interface called Simultispin, dedicated to solid-state cw-EPR spectra simulation. Some examples of experimental spectra of metal complexes (mixture of low spin and high spin Fe^III complexes, dynamic disorder of a Cu^II complex, photogeneration of a Mn^III complex), highlighting specific solid-state functions, are described and analyzed based on simulations performed with Simultispin. We hope that its ergonomy and the ease to set up a complete set of parameters to get reliable simulations could help a large EPR community to improve the efficiency of their interpretations.

Valence-dependent catalytic activities of iron terpyridine complexes for pollutant degradation

Herein, iron-terpyridine complexes with the iron centers at different initial valence states were utilized as homogeneous catalysts for the degradation of phenol in water. The iron(iii)-terpyridine complex induced the formation of more high-valent iron-oxo centers and hydroxyl radicals than the iron(ii)-terpyridine complex, leading to a higher catalytic activity.

Formation, stability and catalase-like activity of mononuclear manganese(ii) and oxomanganese(iv) complexes in protic and aprotic solvents

Catalytic and stoichiometric H₂O₂oxidation by [Mn^II(N4Py*)]²⁺and [Mn^IV(N4Py*)(O)]²⁺complexes as catalase mimics have been carried out.

Stability and Catalase-Like Activity of a Mononuclear Non-Heme Oxoiron(IV) Complex in Aqueous Solution

Heme-type catalase is a class of oxidoreductase enzymes responsible for the biological defense against oxidative damage of cellular components caused by hydrogen peroxide, where metal-oxo species are proposed as reactive intermediates. To get more insight into the mechanism of this curious reaction a non-heme structural and functional model was carried out by the use of a mononuclear complex [Fe^II(N4Py*)(CH₃CN)](CF₃SO₃)₂ (N4Py* = N,N-bis(2-pyridylmethyl)- 1,2-di(2-pyridyl)ethylamine) as a catalyst, where the possible reactive intermediates, high-valent Fe^IV=O and Fe^III–OOH are known and spectroscopically well characterized. The kinetics of the dismutation of H₂O₂ into O₂ and H₂O was investigated in buffered water, where the reactivity of the catalyst was markedly influenced by the pH, and it revealed Michaelis–Menten behavior with K_M = 1.39 M, k_cat = 33 s⁻¹ and k₂(k_cat/K_M) = 23.9 M⁻¹s⁻¹ at pH 9.5. A mononuclear [(N4Py)Fe^IV=O]²⁺ as a possible intermediate was also prepared, and the pH dependence of its stability and reactivity in aqueous solution against H₂O₂ was also investigated. Based on detailed kinetic, and mechanistic studies (pH dependence, solvent isotope effect (SIE) of 6.2 and the saturation kinetics for the initial rates versus the H₂O₂ concentration with K_M = 18 mM) lead to the conclusion that the rate-determining step in these reactions above involves hydrogen-atom transfer between the iron-bound substrate and the Fe(IV)-oxo species.

Non-Heme FeII Diastereomeric Complexes Bearing a Hexadentate Ligand: Unexpected Consequences for the Spin State and Catalytic Oxidation Properties

The reactivity and selectivity of non-heme Fe^II complexes as oxidation catalysts can be substantially modified by alteration of the ligand backbone or introduction of various substituents. In comparison with the hexadentate ligand N,N,N',N'-tetrakis(pyridin-2-ylmethyl)ethane-1,2-diamine (TPEN), N,N'-bis[1-(pyridin-2-yl)ethyl]-N,N'-bis(pyridin-2-ylmethyl)ethane-1,2-diamine (_2Me L₆ ² ) has a methyl group on two of the four picolyl positions. Fe^II complexation by _2Me L₆ ² yields two diastereomeric complexes with very similar structures, which only differ in the axial/equatorial positions occupied by the methylated pyridyl groups. In solution, these two isomers exhibit different magnetic behaviors. Whereas one isomer exhibits temperature-dependent spin-state conversion between the S=0 and S=2 states, the other is more reluctant towards this spin-state equilibrium and is essentially diamagnetic at room temperature. Their catalytic properties for the oxidation of anisole by H₂ O₂ are very different and correlate with their magnetic properties, which reflect their lability/inertness. These different properties most likely depend on the different steric constraints of the methylated pyridyl groups in the two complexes.

Base-controlled mechanistic divergence between iron(iv)-oxo and iron(iii)-hydroperoxo in the H2O2 activation by a nonheme iron(ii) complex

An Fe^II complex reacts with excess H₂O₂ in the presence of sub-stoichiometric NEt₃ to give Fe^IV(O) and Fe^III(OOH) reactive species following a base-dependent and a base-independent pathway, respectively.