A General Concept for the Electronic and Steric Modification of 1-Metallacyclobuta-2,3-dienes: A Case Study of Group 4 Metallocene Complexes

The synthesis of group 4 metal 1-metallacyclobuta-2,3-dienes as organometallic analogues of elusive 1,2-cyclobutadiene has so far been limited to SiMe3 substituted examples. We present the synthesis of two Ph substituted dilithiated ligand precursors for the preparation of four new 1-metallacyclobuta-2,3-dienes [rac-(ebthi)M] (M=Ti, Zr; ebthi=1,2-ethylene-1,10-bis(η5-tetrahydroindenyl)). The organolithium compounds [Li2(RC3Ph)] (1b: R = Ph, 1c: R = SiMe3) as well as the metallacycles of the general formula [rac-(ebthi)M(R1C3R2)] (2b: M=Ti, R1=R2=Ph, 2c: M=Ti, R1=Ph, R2=SiMe3; 3b: M=Zr, R1=R2=Ph; 3c: M=Zr, R1=Ph, R2=SiMe3) were fully characterised. Single crystal X-ray diffraction and quantum chemical bond analysis of the Ti and Zr complexes reveal ligand influence on the biradicaloid character of the titanocene complexes. X-band EPR spectroscopy of structurally similar Ti complexes [rac-(ebthi)Ti(Me3SiC3SiMe3)] (2a), 2b, and 2c was carried out to evaluate the accessibility of an EPR active triplet state. Cyclic voltammetry shows that introduction of Ph groups renders the complexes easier to reduce. 13C CPMAS NMR analysis provides insights into the cause of the low field shift of the resonances of metal-bonded carbon atoms and provides evidence of the absence of the β-C-Ti interaction.

Aerobic Oxidation of 5-Hydroxymethylfurfural (HMF) in Aqueous Medium over Fe-Doped-Poly(heptazine imide) Photocatalysts: Unveiling the Bad Role of Hydroxyl Radical Generation on the Catalytic Performance

5-hydroxymethylfurfural (HMF) oxidation in aqueous media using visible photocatalysis is a green and sustainable route for the valorization of lignocellulosic biomass derivatives. Several semiconductors have already been applied for this purpose; however, the use of Poly(heptazine imides), which has high crystallinity and a special cation exchange property that allows the replacement of the cation held between the layers of C3N4 structure by transition metal ions (TM), remains scarce. In this study, PHI(Na) was synthesized using a melamine/NaCl method and used as precursor to prepare metal (Fe, Co, Ni, or Cu)-doped PHI catalysts. The catalysts were tested for selective oxidation of HMF to 2,5-diformylfuran (DFF) in water and O2 atmosphere under blue LED radiation. The catalytic results revealed that the 0.1 wt% PHI(Fe) catalyst is the most efficient photocatalyst while higher Fe loading (1 and 2 wt%) favors the formation of Fe3+ clusters, which are responsible for the drop in HMF oxidation. Moreover, the 0.1 wt% PHI(Fe) photocatalyst has strong oxidative power due to its efficiency in H2O2 production, thus boosting the generation of nonselective hydroxyl radicals (●OH) via different pathways that can destroy HMF. We found that using 50 mM, the highest DFF production rate (393 μmol·h-1·g-1) was obtained in an aqueous medium under visible light radiation.

Water-Promoted Carbon-Carbon Bond Cleavage Employing a Reusable Fe Single-Atom Catalyst

The development of methods for selective cleavage reactions of thermodynamically stable C-C/C=C bonds in a green manner is a challenging research field which is largely unexplored. Herein, we present a heterogeneous Fe-N-C catalyst with highly dispersed iron centers that allows for the oxidative C-C/C=C bond cleavage of amines, secondary alcohols, ketones, and olefins in the presence of air (O2 ) and water (H2 O). Mechanistic studies reveal the presence of water to be essential for the performance of the Fe-N-C system, boosting the product yield from <1 % to >90 %. Combined spectroscopic characterizations and control experiments suggest the singlet 1 O2 and hydroxide species generated from O2 and H2 O, respectively, take selectively part in the C-C bond cleavage. The broad applicability (>40 examples) even for complex drugs as well as high activity, selectivity, and durability under comparably mild conditions highlight this unique catalytic system.

Experimental Validation and Computational Predictions Join Forces to Map Catalytic C-H Activation in Ferrocene Metalated Porous Organic Polymers

In recent times, a self-complementary balanced characteristic feature with the combination of both covalent bonds (structural stability) and open metal sites (single-site catalysis) introduced an advanced emerging functional nanoarchitecture termed metalated porous organic polymers (M-POPs). However, the development of M-POPs in view of the current interest in catalysis has been realized still in its infancy and remains a challenge for the years to come. In this work, we built benzothiazole-linked Fe-metalated porous organic polymer (Fc-Bz-POP) using ferrocene dicarboxaldehyde (FDC), 1,3,5-tris(4-aminophenyl) benzene (APB), and elemental sulfur (S₈) via a template-free, multicomponent, cost-effective one-pot synthetic approach. This Fc-Bz-POP is endowed with unique features including an extended network unit, isolated active sites, and catalytic pocket with a possible local structure, in which convergent binding sites are positioned in such a way that substrate molecules can be held in close proximity. Prospective catalytic application of this Fc-Bz-POP has been explored in executing catalytic allylic "C-H" bond functionalization of cyclohexene (CHX) in water at room temperature. Catalytic screening results identified that a superior performance with a CHX conversion of 95% and a 2-cyclohexene-1-ol selectivity (COL) of 80.8% at 4 h and 25 °C temperature has been achieved over Fc-Bz-POP, thereby addressing previous shortcomings of the other conventional catalytic systems. Comprehensive characterization understanding with the aid of synchrotron-based extended X-ray absorption fine structure (EXAFS) analysis manifested that the Fe atom with an oxidation state of +2 in our Fc-Bz-POP catalytic system encompasses a sandwich structural environment with the two symmetrical eclipsed cyclopentadienyl (Cp) rings, featuring nearest-neighbor (NN) Fe-C (≈2.05 Å) intramolecular bonds, as validated by the Fe L₃-edge EXAFS fitting result. Furthermore, in situ attenuated total reflection-infrared spectroscopy (ATR-IR) analysis data for liquid-phase oxidation of cyclohexene allow for the formulation of a molecular-level reaction mechanistic pathway with the involvement of specific reaction intermediates, which is initiated by the radical functionalization of the allyl hydrogen. A deep insight investigation from density functional theory (DFT) calculations unambiguously revealed that the dominant pathway from cyclohexene to 2-cyclohexene-1-ol is initiated by an allyl-H functionalization step accompanied by the formation of 2-cyclohexene-1-hydroperoxide species as the key reaction intermediate. Electronic properties obtained from DFT simulations via the charge density difference plot, Bader charge, and density of state (DOS) demonstrate the importance of the organic polymer frame structure in altering the electronic properties of the Fe site in Fc-Bz-POP, resulting in its high activity. Our contribution has great implications for the precise design of metalated porous organic polymer-based robust catalysts, which will open a new avenue to get a clear image of surface catalysis.

Unveiling the CO Oxidation Mechanism over a Molecularly Defined Copper Single-Atom Catalyst Supported on a Metal-Organic Framework

Elucidating the reaction mechanism in heterogeneous catalysis is critically important for catalyst development, yet remains challenging because of the often unclear nature of the active sites. Using a molecularly defined copper single-atom catalyst supported on a UiO-66 metal-organic framework (Cu/UiO-66), allows a detailed mechanistic elucidation of the CO oxidation reaction. Based on a combination of in situ / operando spectroscopies, kinetic measurements including kinetic isotope effects, and density functional theory-based calculations, we identified the active site, reaction intermediates, and transition states of the dominant reaction cycle as well as the changes in oxidation/spin state during reaction. The reaction involves the continuous reactive dissociation of adsorbed O2, by reaction of O2,ad with COad, leading to the formation of an O atom connecting the Cu center with a neighboring Zr4+ ion as rate limiting step. This is removed in a second activated step.

Tailoring Active Cu2O/Copper Interface Sites for N-Formylation of Aliphatic Primary Amines with CO2/H2

Heterogenous catalyzed N-formylation of amines to formamide with CO2/H2 has been highly attractive on the valorization of the CO2. However, the relationship of the catalytic performance with the catalyst structure is still elusive. Herein, the mixed-valence catalysts containing Cu2O/Cu interface sites were constructed for this transformation. Both aliphatic primary and secondary amines with diverse structures were efficiently converted into the desired formamides with good to excellent yields. Combined ex and in situ catalyst characterizations revealed that the presence of Cu2O/Cu interface sites was vital for the excellent catalytic activity. Density functional theory (DFT) calculations demonstrated that better catalytic activity of Cu2O/Cu(111) than Cu(111) can be attributed to the assistance of oxygen at the Cu2O/Cu interface (Ointer) in formation of Ointer-H moieties, which not only reduce the apparent barrier of HCOOH formation but also benefit the desorption of the desired N-formylated amine, leading to the high activity and selectivity.

Photoexcited cobalt catalysed endo-selective alkyl Heck reaction

Herein, we report an intramolecular endo-selective Heck reaction of iodomethylsilyl ethers of phenols and alkenols. The reaction leads to the formation of seven- and eight-membered siloxycycles in excellent yields, which could be further converted into the corresponding allylic alcohols upon oxidation. Thus, this method could be used for the selective (Z)-hydroxymethylation of o-hydroxystyrenes and alkenols. Rapid scan EPR experiments and DFT calculations suggest a concerted β-hydrogen elimination event to take place in the triplet state.

Integrating Bifunctionality and Chemical Stability in Covalent Organic Frameworks via One-Pot Multicomponent Reactions for Solar-Driven H2O2 Production

Multicomponent reactions (MCRs) can be used to introduce different functionalities into highly stable covalent organic frameworks (COFs). In this work, the irreversible three-component Doebner reaction is utilized to synthesize four chemically stable quinoline-4-carboxylic acid DMCR-COFs (DMCR-1-3 and DMCR-1NH) equipped with an acid-base bifunctionality. These DMCR-COFs show superior photocatalytic H₂O₂ evolution (one of the most important industrial oxidants) compared to the imine COF analogue (Imine-1). This is achieved with sacrificial oxidants but also in pure water and under an oxygen or air atmosphere. Furthermore, the DMCR-COFs show high photostability, durability, and recyclability. MCR-COFs thus provide a viable materials' platform for solar to chemical energy conversion.

In Situ-Generated CuI Catalytic System for Oxidative N-Formylation of N-Heterocycles and Acyclic Amines with Methanol

The development of a sustainable and simple catalytic system for N-formylation of N-heterocycles with methanol by direct coupling remains a challenge, owing to many competing side reactions, given the sensitivity of N-heterocycles to many catalytic oxidation or dehydrogenation systems. This work concerns the development of an in situ-generated Cu^I catalytic system for oxidative N-formylation of N-heterocycles with methanol that is based on the case study of a more typical 1,2,3,4-tetrahydroquinoline as substrate. Aside from N-heterocycles, some acyclic amines are also transformed into the corresponding N-formamides in moderate yields. Furthermore, a probable reaction mechanism and reaction pathway are proposed and extension of work based on some findings leads to a demonstration that the formed ⋅O₂ ^- and ⋅OOH radicals in the catalytic system is related to the formation of undesired tar-like products.

Programmable Photocatalytic Activity of Multicomponent Covalent Organic Frameworks Used as Metallaphotocatalysts

The multicomponent approach allows to incorporate several functionalities into a single covalent organic framework (COF) and consequently allows the construction of bifunctional materials for cooperative catalysis. The well-defined structure of such multicomponent COFs is furthermore ideally suited for structure-activity relationship studies. We report a series of multicomponent COFs that contain acridine- and 2,2'-bipyridine linkers connected through 1,3,5-benzenetrialdehyde derivatives. The acridine motif is responsible for broad light absorption, while the bipyridine unit enables complexation of nickel catalysts. These features enable the usage of the framework materials as catalysts for light-mediated carbon-heteroatom cross-couplings. Variation of the node units shows that the catalytic activity correlates to the keto-enamine tautomer isomerism. This allows switching between high charge-carrier mobility and persistent, localized charge-separated species depending on the nodes, a tool to tailor the materials for specific reactions. Moreover, nickel-loaded COFs are recyclable and catalyze cross-couplings even using red light irradiation.

Constitutional isomerism of the linkages in donor–acceptor covalent organic frameworks and its impact on photocatalysis

When new covalent organic frameworks (COFs) are designed, the main efforts are typically focused on selecting specific building blocks with certain geometries and properties to control the structure and function of the final COFs. The nature of the linkage (imine, boroxine, vinyl, etc.) between these building blocks naturally also defines their properties. However, besides the linkage type, the orientation, i.e., the constitutional isomerism of these linkages, has rarely been considered so far as an essential aspect. In this work, three pairs of constitutionally isomeric imine-linked donor-acceptor (D-A) COFs are synthesized, which are different in the orientation of the imine bonds (D-C=N-A (DCNA) and D-N=C-A (DNCA)). The constitutional isomers show substantial differences in their photophysical properties and consequently in their photocatalytic performance. Indeed, all DCNA COFs show enhanced photocatalytic H₂ evolution performance than the corresponding DNCA COFs. Besides the imine COFs shown here, it can be concluded that the proposed concept of constitutional isomerism of linkages in COFs is quite universal and should be considered when designing and tuning the properties of COFs.

Systematic investigation of isomerism in covalent organic frameworks (COFs) can provide key insights into their properties. Here, the authors reveal that the constitutional isomerism of the linkage i.e., linkage orientations distinctly impact COFs’ structural and photophysical properties.

Glycolaldehyde as a Bio-Based C1 Building Block for Selective N-Formylation of Secondary Amines

Biomass derived glycolaldehyde was employed as C1 building block for the N-formylation of secondary amines using air as oxidant. The reaction is atom economic, highly selective and proceeds under catalyst free conditions. This strategy can be used for the synthesis of cyclic and acyclic formylamines, including DMF. Mechanistic studies suggest a radical oxidation pathway.

Pyrimidopteridine-catalyzed Photo-mediated Hydroacetoxylation

Herein we report a photo-mediated formal addition of carboxylic acids to activated alkenes catalyzed by a pyrimidopteridine photoredox catalyst. The decarboxylation of aliphatic carboxylic acids upon single-electron oxidation is countered in the presence of electron-rich alkenes and a hydroacetoxylation is observed. Mechanistic proposals have been made based on CV measurements, competitive Stern-Volmer quenching and EPR experiments. Evidence that tetra-N-substituted pyrimidopteridines function as dual photoredox and hydrogen atom transfer catalyst was supported by spectroscopic means.

Photomediated Hydro- and Deuterodecarboxylation of Pharmaceutically Relevant and Natural Aliphatic Carboxylic Acids

Herein, we report a photomediated hydro- and deuterodecarboxylation of different primary, secondary, and tertiary carboxylic acids catalyzed by an organic pyrimidopteridine photoredox catalyst. The reaction was optimized by a statistical design of experiment (DoE). Under optimized reaction conditions, the conversion of commercially available nonsteroidal anti-inflammatory drugs (NSAIDs) in tablet form and on gram scale was realized. The scope of the application comprises primary, secondary, and tertiary aliphatic biologically active carboxylic acids. A deuterium incorporation of up to 95% by using D₂O as inexpensive deuterium source was achieved. A sensitivity assessment as well as experiments aiding the elucidation of the reaction mechanism are discussed.

Radical Reactivity of the Biradical [⋅P(μ-NTer)2 P⋅] and Isolation of a Persistent Phosphorus-Cantered Monoradical [⋅P(μ-NTer)2 P-Et]

The activation of C-Br bonds in various bromoalkanes by the biradical [⋅P(μ-NTer)₂ P⋅] (1) (Ter=2,6-bis-(2,4,6-trimethylphenyl)-phenyl) is reported, yielding trans-addition products of the type [Br-P(μ-NTer)₂ P-R] (2), so-called 1,3-substituted cyclo-1,3-diphospha-2,4-diazanes. This addition reaction, which represents a new easy approach to asymmetrically substituted cyclo-1,3-diphospha-2,4-diazanes, was investigated mechanistically by different spectroscopic methods (NMR, EPR, IR, Raman); the results suggested a stepwise radical reaction mechanism, as evidenced by the in-situ detection of the phosphorus-centered monoradical [⋅P(μ-NTer)₂ P-R].< To provide further evidence for the radical mechanism, [⋅P(μ-NTer)₂ P-Et] (3Et⋅) was synthesized directly by reduction of the bromoethane addition product [Br-P(μ-NTer)₂ P-Et] (2 a) with magnesium, resulting in the formation of the persistent phosphorus-centered monoradical [⋅P(μ-NTer)₂ P-Et], which could be isolated and fully characterized, including single-crystal X-ray diffraction. Comparison of the EPR spectrum of the radical intermediate in the addition reaction with that of the synthesized new [⋅P(μ-NTer)₂ P-Et] radical clearly proves the existence of radicals over the course of the reaction of biradical [⋅P(μ-NTer)₂ P⋅] (1) with bromoethane. Extensive DFT and coupled cluster calculations corroborate the experimental data for a radical mechanism in the reaction of biradical [⋅P(μ-NTer)₂ P⋅] with EtBr. In the field of hetero-cyclobutane-1,3-diyls, the demonstration of a stepwise radical reaction represents a new aspect and closes the gap between P-centered biradicals and P-centered monoradicals in terms of radical reactivity.

Acridine-Functionalized Covalent Organic Frameworks (COFs) as Photocatalysts for Metallaphotocatalytic C-N Cross-Coupling

Covalent organic frameworks (COFs) are structurally tuneable, porous and crystalline polymers constructed through the covalent attachment of small organic building blocks as elementary units. Using the myriad of such building blocks, a broad spectrum of functionalities has been applied for COF syntheses for broad applications, including heterogeneous catalysis. Herein, we report the synthesis of a new family of porous and crystalline COFs using a novel acridine linker and benzene‐1,3,5‐tricarbaldehyde derivatives bearing a variable number of hydroxy groups. With the broad absorption in the visible light region, the COFs were applied as photocatalysts in metallaphotocatalytic C−N cross‐coupling. The fully β‐ketoenamine linked COF showed the highest activity, due to the increased charge separation upon irradiation. The COF showed good to excellent yields for several aryl bromides, good recyclability and even catalyzed the organic transformation in presence of green light as energy source.

Role of Magnetic Coupling in Photoluminescence Kinetics of Mn2+-Doped ZnS Nanoplatelets

Mn²⁺-doped semiconductor nanocrystals with tuned location and concentration of Mn²⁺ ions can yield diverse coupling regimes, which can highly influence their optical properties such as emission wavelength and photoluminescence (PL) lifetime. However, investigation on the relationship between the Mn²⁺ concentration and the optical properties is still challenging because of the complex interactions of Mn²⁺ ions and the host and between the Mn²⁺ ions. Here, atomically flat ZnS nanoplatelets (NPLs) with uniform thickness were chosen as matrixes for Mn²⁺ doping. Using time-resolved (TR) PL spectroscopy and density functional theory (DFT) calculations, a connection between coupling and PL kinetics of Mn²⁺ ions was established. Moreover, it is found that the Mn²⁺ ions residing on the surface of a nanostructure produce emissive states and interfere with the change of properties by Mn²⁺-Mn²⁺ coupling. In a configuration with suppressed surface contribution to the optical response, we show the underlying physical reasons for double and triple exponential decay by DFT methods. We believe that the presented doping strategy and simulation methodology of the Mn²⁺-doped ZnS (ZnS:Mn) system is a universal platform to study dopant location- and concentration-dependent properties also in other semiconductors.

Oxygen vacancies in Ru/TiO2 - drivers of low-temperature CO2 methanation assessed by multimodal operando spectroscopy

Hydrogenation of CO₂ is very attractive for transforming this greenhouse gas into valuable high energy density compounds. In this work, we developed a highly active and stable Ru/TiO₂ catalyst for CO₂ methanation prepared by a solgel method that revealed much higher activity in methanation of CO₂ (ca. 4–14 times higher turnover frequencies at 140–210°C) than state-of-the-art Ru/TiO₂ catalysts and a control sample prepared by wetness impregnation. This is attributed to a high concentration of O-vacancies, inherent to the solgel methodology, which play a dual role for 1) activation of CO₂ and 2) transfer of electrons to interfacial Ru sites as evident from operando DRIFTS and in situ EPR investigations. These results suggest that charge transfer from O-vacancies to interfacial Ru sites and subsequent electron donation from filled metal d-orbitals to antibonding orbitals of adsorbed CO are decisive factors in boosting the CO₂ methanation activity.

•

Solgel prepared Ru/TiO₂ outperforms methanation activity of similar materials

•

Reliable insight of O-vacancies role is gained by combined operando techniques

•

Enhanced interaction of O-vacancy-Ru⁰ sites boosts methane rate

Scalable and selective deuteration of (hetero)arenes

Isotope labelling, particularly deuteration, is an important tool for the development of new drugs, specifically for identification and quantification of metabolites. For this purpose, many efficient methodologies have been developed that allow for the small-scale synthesis of selectively deuterated compounds. Due to the development of deuterated compounds as active drug ingredients, there is a growing interest in scalable methods for deuteration. The development of methodologies for large-scale deuterium labelling in industrial settings requires technologies that are reliable, robust and scalable. Here we show that a nanostructured iron catalyst, prepared by combining cellulose with abundant iron salts, permits the selective deuteration of (hetero)arenes including anilines, phenols, indoles and other heterocycles, using inexpensive D₂O under hydrogen pressure. This methodology represents an easily scalable deuteration (demonstrated by the synthesis of deuterium-containing products on the kilogram scale) and the air- and water-stable catalyst enables efficient labelling in a straightforward manner with high quality control.

A method for the selective deuteration of anilines, indoles, phenols and heterocyclic compounds, including natural products and other bioactive molecules, has been developed. The nanostructured iron catalyst that underpins this process is prepared by combining cellulose with iron salts and has been used for the preparation of deuterated compounds on up to a kilogram scale.

Catalytic and mechanistic studies of a highly active and E-selective Co(II) PNNH pincer catalyst system for transfer-semihydrogenation of internal alkynes

Herein we report the application of a Co(II) PNNH pincer catalyst system (PNNH = 2-(5-(t-butyl)-1H-pyrazol-3-yl)-6-(dialkylphosphinomethyl)pyridine) for the highly E-selective transfer semihydrogenation of internal diaryl alkynes using methanol and ammonia borane...

Correction: Catalytic and mechanistic studies of a highly active and E-selective Co(ii) PNNH pincer catalyst system for transfer-semihydrogenation of internal alkynes

Correction for ‘Catalytic and mechanistic studies of a highly active and E-selective Co(ii) PNNH pincer catalyst system for transfer-semihydrogenation of internal alkynes’ by David Decker et al., Inorg. Chem. Front., 2022, DOI: 10.1039/d1qi00998b.

Effect of AlSiOx support modification by alkali or alkaline earth metals on propene formation in the metathesis of C2H4 and 2-C4H8 over MoOx-based catalysts

The metathesis of ethylene with 2-butenes to propene is currently applied for large-scale on-purpose production of this building block of the chemical industry. MoOx-based supported catalysts are promising alternatives to...

Supported CuII Single-Ion Catalyst for Total Carbon Utilization of C2 and C3 Biomass-Based Platform Molecules in the N-Formylation of Amines

The shift from fossil carbon sources to renewable ones is vital for developing sustainable chemical processes to produce valuable chemicals. In this work, value‐added formamides were synthesized in good yields by the reaction of amines with C₂ and C₃ biomass‐based platform molecules such as glycolic acid, 1,3‐dihydroxyacetone and glyceraldehyde. These feedstocks were selectively converted by catalysts based on Cu‐containing zeolite 5A through the in situ formation of carbonyl‐containing intermediates. To the best of our knowledge, this is the first example in which all the carbon atoms in biomass‐based feedstocks could be amidated to produce formamide. Combined catalyst characterization results revealed preferably single Cu^II sites on the surface of Cu/5A, some of which form small clusters, but without direct linking via oxygen bridges. By combining the results of electron paramagnetic resonance (EPR) spin‐trapping, operando attenuated total reflection (ATR) IR spectroscopy and control experiments, it was found that the formation of formamides might involve a HCOOH‐like intermediate and ^.NHPh radicals, in which the selective formation of ^.OOH radicals might play a key role.

A Persistent Phosphanyl-Substituted Thioketyl Radical Anion

Alkali metal salts, M⁺[Ter(iPr)P−C(=S)−P(iPr)₂S]^.− (M=Na, K; 2_M; Ter=2,6‐bis‐(2,4,6‐trimethylphenyl)phenyl) containing a room‐temperature‐stable thioketyl radical anion were obtained by reduction of the thioketone precursor, Ter(iPr)P−C(=S)−P(iPr)₂S (1), with alkali metals (Na, K). Single‐crystal X‐ray studies as well as EPR spectroscopy revealed the unequivocal existence of a thioketyl radical anion in the solid state and in solution, respectively. The computed Mulliken spin density within 2_M is mainly located at the sulfur (49 %) and the carbonyl carbon (33 %) atoms. Upon adding [2.2.2]‐cryptand to the radical species 2_K to minimize the interionic interaction, an activation reaction was observed, yielding a potassium salt with a phosphanyl thioether based anion, [K(crypt)]⁺[Ter(iPr)P−C(−S‐iPr)−P(iPr)₂S]⁻ (3) as the product of an intermolecular shift of an iPr group from a second anion. The products were fully characterized and application of the radical anion as a reducing agent was demonstrated.

Dihydroxyacetone valorization with high atom efficiency via controlling radical oxidation pathways over natural mineral-inspired catalyst

Diminishing fossil fuel resources and calls for sustainability are driving the urgent need for efficient valorization of renewable resources with high atom efficiency. Inspired from the natural goethite mineral with Mn paragenesis, we develop cost-effective MnO2/goethite catalysts for the efficient valorization of dihydroxyacetone, an important biomass-based platform molecule, into value-added glycolic acid and formic acid with 83.2% and 93.4% yields. The DHA substrates first undergo C-C cleavage to selectively form glycolic acid and hydroxymethyl (·CH2OH) radicals, which are further oxidized into formic acid. The kinetic and isotopic labeling experiments reveal that the catalase-like activity of MnO2 turns the oxidative radicals into oxygen, which then switches towards a hydroxymethyl peroxide (HMOO) pathway for formic acid generation and prevents formic acid over-oxidation. This nature-inspired catalyst design not only significantly improves the carbon efficiency to 86.6%, but also enhances the oxygen atom utilization efficiency from 11.2% to 46.6%, indicating a promising biomass valorization process.

In situ formation of ZnOx species for efficient propane dehydrogenation

Propane dehydrogenation (PDH) to propene is an important alternative to oil-based cracking processes, to produce this industrially important platform chemical1,2. The commercial PDH technologies utilizing Cr-containing (refs. 3,4) or Pt-containing (refs. 5-8) catalysts suffer from the toxicity of Cr(VI) compounds or the need to use ecologically harmful chlorine for catalyst regeneration9. Here, we introduce a method for preparation of environmentally compatible supported catalysts based on commercial ZnO. This metal oxide and a support (zeolite or common metal oxide) are used as a physical mixture or in the form of two layers with ZnO as the upstream layer. Supported ZnOx species are in situ formed through a reaction of support OH groups with Zn atoms generated from ZnO upon reductive treatment above 550 °C. Using different complementary characterization methods, we identify the decisive role of defective OH groups for the formation of active ZnOx species. For benchmarking purposes, the developed ZnO-silicalite-1 and an analogue of commercial K-CrOx/Al2O3 were tested in the same setup under industrially relevant conditions at close propane conversion over about 400 h on propane stream. The developed catalyst reveals about three times higher propene productivity at similar propene selectivity.

Ni-In Synergy in CO2 Hydrogenation to Methanol

Indium oxide (In2O3) is a promising catalyst for selective CH3OH synthesis from CO2 but displays insufficient activity at low reaction temperatures. By screening a range of promoters (Co, Ni, Cu, and Pd) in combination with In2O3 using flame spray pyrolysis (FSP) synthesis, Ni is identified as the most suitable first-row transition-metal promoter with similar performance as Pd-In2O3. NiO-In2O3 was optimized by varying the Ni/In ratio using FSP. The resulting catalysts including In2O3 and NiO end members have similar high specific surface areas and morphology. The main products of CO2 hydrogenation are CH3OH and CO with CH4 being only observed at high NiO loading (≥75 wt %). The highest CH3OH rate (∼0.25 gMeOH/(gcat h), 250 °C, and 30 bar) is obtained for a NiO loading of 6 wt %. Characterization of the as-prepared catalysts reveals a strong interaction between Ni cations and In2O3 at low NiO loading (≤6 wt %). H2-TPR points to a higher surface density of oxygen vacancy (Ov) due to Ni substitution. X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and electron paramagnetic resonance analysis of the used catalysts suggest that Ni cations can be reduced to Ni as single atoms and very small clusters during CO2 hydrogenation. Supportive density functional theory calculations indicate that Ni promotion of CH3OH synthesis from CO2 is mainly due to low-barrier H2 dissociation on the reduced Ni surface species, facilitating hydrogenation of adsorbed CO2 on Ov.

Fluorescent Hybrid Porous Polymers as Sustainable Heterogeneous Photocatalysts for Cross-Dehydrogenative Coupling Reactions

A series of hybrid porous polymers (HPPs) based on polyhedral oligomeric silsesquioxane (POSS) were synthesized, characterized, and successfully used as metal-free heterogeneous photocatalysts for cross-dehydrogenative coupling reactions (CDC), for which the aza-Henry coupling of tetrahydroisoquinolines and nitroalkanes was studied as the model reaction. The reactions run smoothly at room temperature under visible (blue) light irradiation using gaseous oxygen as an oxidant under atmospheric pressure. These novel metal-free heterogeneous photocatalysts can be readily recovered and reused without a significant loss of reactivity. Mechanistic investigations revealed the intermediacy of ¹O₂, obtained from ³O₂ sensitization (energy transfer) by the photoexcited catalyst.

Protonated Imine-Linked Covalent Organic Frameworks for Photocatalytic Hydrogen Evolution

Covalent organic frameworks (COFs) have emerged as an important class of organic semiconductors and photocatalysts for the hydrogen evolution reaction (HER)from water. To optimize their photocatalytic activity, typically the organic moieties constituting the frameworks are considered and the most suitable combinations of them are searched for. However, the effect of the covalent linkage between these moieties on the photocatalytic performance has rarely been studied. Herein, we demonstrate that donor‐acceptor (D‐A) type imine‐linked COFs can produce hydrogen with a rate as high as 20.7 mmol g⁻¹ h⁻¹ under visible light irradiation, upon protonation of their imine linkages. A significant red‐shift in light absorbance, largely improved charge separation efficiency, and an increase in hydrophilicity triggered by protonation of the Schiff‐base moieties in the imine‐linked COFs, are responsible for the improved photocatalytic performance.

Simultaneously Tuning the Defects and Surface Properties of Ta3N5 Nanoparticles by Mg-Zr Codoping for Significantly Accelerated Photocatalytic H2 Evolution

The simultaneous control of the defect species and surface properties of semiconducting materials is a crucial aspect of improving photocatalytic performance, yet it remains challenging. Here, we synthesized Mg-Zr-codoped single-crystalline Ta₃N₅ (Ta₃N₅:Mg+Zr) nanoparticles by a brief NH₃ nitridation process, exhibiting photocatalytic water reduction activity 45 times greater than that of pristine Ta₃N₅ under visible light. A coherent picture of the relations between the defect species (comprising reduced Ta, nitrogen vacancies and oxygen impurities), surface properties (associated with dispersion of the Pt cocatalyst), charge carrier dynamics, and photocatalytic activities was drawn. The tuning of defects and simultaneous optimization of surface properties resulting from the codoping evidently resulted in the generation of high concentrations of long-lived electrons in this material as well as the efficient migration of these electrons to evenly distributed surface Pt sites. These effects greatly enhanced the photocatalytic activity. This work highlights the importance and feasibility of improving multiple properties of a catalytic material via a one-step strategy.

Visible-Light-Induced Palladium-Catalyzed Dehydrogenative Carbonylation of Amines to Oxalamides

The palladium-catalyzed oxidative carbonylation of amines toward the synthesis of oxalamides has been established around 30 years ago and it usually needs the presence of (over)stoichiometric amounts of oxidant. In this work, the first transformation of this type in which the oxidant was replaced by visible light is described. The new approach uses a simple robust Pd complex, which can even be partially recycled. A mechanistic reason is provided and supported by control experiments and EPR studies, showing that Pd^I was formed and Pd⁰ was the active species. Both nitrogen- and the intermediate acyl radical can be detected. Moreover, the formation of hydrogen was confirmed by gas GC.