Production of Bio Hydrofined Diesel, Jet Fuel, and Carbon Monoxide from Fatty Acids Using a Silicon Nanowire Array-Supported Rhodium Nanoparticle Catalyst under Microwave Conditions

Manufacturing carbon storage sintered body using microwave-selective and high-speed heating techniques

Microwave sintering of fly ash samples with large amounts of unburned carbon and CaCO₃ was examined in this study. To this end, CaCO₃ was mixed with fly ash sintered body to fix CO₂. The decomposition of CaCO₃ was observed when the raw material was heated to 1000 °C using microwave irradiation; however, a sintered body containing aragonite was obtained when the raw material was heated to 1000 °C with added water. Further, carbides in the fly ash could be selectively heated by controlling the microwave irradiation. The microwave magnetic field created a temperature gradient of 100 °C in a narrow region of 2.7 μm or less in the sintered body, and it helped suppress the CaCO₃ decomposition in the mixture during sintering. By storing water in the gas phase before spreading, CaCO₃, which is difficult to sinter using conventional heating, can be sintered without decomposing.

Microwave-Assisted Hydrogen-Free Reductive Deiodination of Iodoarenes with Silicon-Nanoarray Palladium-Nanoparticle Catalyst

The hydrogenolysis of iodoarenes using a silicon-nanoarray palladium catalyst under microwave irradiation was investigated. When triethanolamine was used as the sacrificial reductant, the reaction proceeded via reductive deiodination under an aerobic atmosphere even without the presence of the explosive hydrogen gas, affording the corresponding hydrogen-substituted arenes in high yields. No reaction occurred in the absence of microwaves, indicating a noticeable microwave effect.

Microwave-assisted decarboxylative reactions: advanced strategies for sustainable organic synthesis

Recent advances in the microwave-assisted decarboxylative reactions of carboxylic acids and their derivatives, including transition-metal-catalyzed and metal-free approaches, are summarized.

Microwave-assisted photooxidation of sulfoxides

We demonstrated microwave-assisted photooxidation of sulfoxides to the corresponding sulfones using ethynylbenzene as a photosensitizer. Efficiency of the photooxidation was higher under microwave irradiation than under conventional thermal heating conditions. Under the conditions, ethynylbenzene promoted the oxidation more efficiently than conventional photosensitizers benzophenone, anthracene, and rose bengal. Ethynylbenzene, whose T1 state is extremely resistant to intersystem crossing to the ground state, was suitable to this reaction because spectroscopic and related reported studies suggested that this non-thermal effect was caused by elongating lifetime of the T1 state by microwave. This is the first study in which ethynylbenzene is used as a photosensitizer in a microwave-assisted photoreaction.

Decrease in the Crystallite Diameter of Solid Crystalline Magnetite around the Curie Temperature by Microwave Magnetic Fields Irradiation

A decrease in the crystallite diameter of ferrites irradiated with microwaves has been considered as a non-thermal effect of so-called de-crystallization; however, its mechanism has not been elucidated. We hypothesized that a decrease in the crystallite diameter is caused by interaction between the ordered spins of ferrite and the magnetic field of microwaves. To verify this, we focused on magnetite with a Curie temperature of 585 °C. Temperature dependence around this temperature and time dependence of the crystallite diameter of the magnetite irradiated with microwaves at different temperatures and durations were investigated. From the X-ray diffraction data, the crystallite diameter of magnetite exhibited a minimum value at 500 °C, just below the Curie temperature of magnetite, where the energy loss of the interaction between magnetite's spins and the microwaves takes the maximum value. The crystallite diameter exhibited a minimum value at 5 min irradiation time, during which the microwaves were excessively absorbed. Transmission electron microscopy observations showed that the microstructure of irradiated magnetite in this study was different from that reported previously, indicating that a decrease in the crystallite diameter is not caused by de-crystallization but its similar phenomenon. A decrease in coercivity and lowering temperature of Verwey transition were observed, evidencing decreased crystallite diameter. This study can thus contribute to the development of the theory of a non-thermal effect.

Catalytic Reductive Alkylation of Amines in Batch and Microflow Conditions Using a Silicon-Wafer-Based Palladium Nanocatalyst

We describe the development of the catalytic reductive alkylation of amines with aldehydes under the atmospheric pressure of H2 using a brush-like silicon-nanostructure-supported palladium nanoparticle composite (SiNS-Pd) as a silicon-wafer-based reusable heterogeneous catalyst. The present reaction of primary and secondary amines with various aliphatic and aromatic aldehydes in the presence of the catalyst (0.02-0.05 mol % Pd) gave the corresponding secondary and tertiary amines including Lomerizine and Aticaprant in a 68% quantitative yield without overalkylation. We also designed and fabricated a flow device equipped with SiNS-Pd for microflow reactions, which was applied to the gas-liquid-solid triphasic reaction system (i.e., H2 gas, a substrate solution, and a solid catalyst). A multigram-scale reaction of aniline and benzaldehyde was demonstrated to obtain N-benzylaniline (ca. 4 g/day), in which the internal volume of the flow channel was 43 μL, the residence time was approximately 1 s, and the turnover number (TON) reached 4.0 × 104 in a continuous 24 h run (1.7 × 103 h-1; 0.50 s-1).

Metallically gradated silicon nanowire and palladium nanoparticle composites as robust hydrogenation catalysts

Heterogeneous catalysis of alkenes to alkanes is of great importance in chemical industry, but more efficient and reusable heterogeneous catalysts are still demanded. Here, we report a metallically gradated composite of a silicon nanowire array and palladium nanoparticles which are reused for the hydrogenation of an alkene. The catalyst promotes the hydrogenation of stilbene with atmospheric hydrogen (0.1 MPa) to give diphenylethane quantitatively. The recovered catalyst can be reused, and mediates the reaction without loss of yield more than one hundred times, whereas the stability of Pd/C degrades rapidly over 10 cycles of reuse. The catalyst allows the hydrogenation of a variety of alkenes, including tetra-substituted olefins. Structural investigation reveals that palladium nanoparticles are metallically gradated onto the silicon nanowire array under mild conditions by agglomeration of palladium silicide, as confirmed by XAFS and XPS together with argon-ion sputtering. This means of metal agglomeration immobilization may be applicable to the preparation of a variety of metal nanoparticle catalysts.