Existence and Properties of Isolated Catalytic Sites on the Surface of β-Cristobalite-Supported, Doped Tungsten Oxide Catalysts (WOx/β-SiO2, Na-WOx/β-SiO2, Mn-WOx/β-SiO2) for Oxidative Coupling of Methane (OCM): A Combined Periodic DFT and Experimental Study

Oxidative Coupling of Methane: Examining the Inactivity of the MnOx -Na2 WO4 /SiO2 Catalyst at Low Temperature

Oxidative coupling of methane (OCM) catalyzed by MnO_x -Na₂ WO₄ /SiO₂ has great industrial promise to convert methane directly to C_2-3 products, but its high light-off temperature is the most challenging obstacle to commercialization and its working mechanism is still a mystery. We report the discovery of a low-temperature active and selective MnO_x -Na₂ WO₄ /SiO₂ catalyst enriched with Q² units in the SiO₂ carrier, being capable of converting 23 % CH₄ with 72 % C_2-3 selectivity at 660 °C. From experiments and theoretical calculations, a large number of Q² units in the MnO_x -Na₂ WO₄ /SiO₂ catalyst is a trigger for markedly lowering the light-off temperature of the Mn³⁺ ↔Mn²⁺ redox cycle involved in the OCM reaction because of the easy formation of MnSiO₃ . Notably, the MnSiO₃ formation proceeds merely through the SiO₂ -involved reaction in the presence of Na₂ WO₄ : Mn₇ SiO₁₂ +6 SiO₂ ↔7 MnSiO₃ +1.5 O₂ . The Na₂ WO₄ not only drives the light-off of this cycle but also gets it working with substantial selectivity toward C_2-3 products. Our findings shine a light on the rational design of more advanced MnO_x -Na₂ WO₄ based OCM catalysts through establishing new Mn³⁺ ↔Mn²⁺ redox cycles with lowered light-off temperature.

Realistic Modelling of Dynamics at Nanostructured Interfaces Relevant to Heterogeneous Catalysis

The focus of this short review is directed towards investigations of the dynamics of nanostructured metallic heterogeneous catalysts and the evolution of interfaces during reaction—namely, the metal–gas, metal–liquid, and metal–support interfaces. Indeed, it is of considerable interest to know how a metal catalyst surface responds to gas or liquid adsorption under reaction conditions, and how its structure and catalytic properties evolve as a function of its interaction with the support. This short review aims to offer the reader a birds-eye view of state-of-the-art methods that enable more realistic simulation of dynamical phenomena at nanostructured interfaces by exploiting resource-efficient methods and/or the development of computational hardware and software.

Studies on activation factors for oxidative coupling of methane over lithium-based silicate/germanate catalysts

Activation factors for improving oxidative coupling of methane (OCM) catalytic performance have been identified. Potential OCM catalysts, Li4SiO4 and Li4GeO4, have been discovered.

A combined computational and experimental study of methane activation during oxidative coupling of methane (OCM) by surface metal oxide catalysts

The experimentally validated computational models developed herein, for the first time, show that Mn-promotion does not enhance the activity of the surface Na2WO4 catalytic active sites for CH4 heterolytic dissociation during OCM. Contrary to previous understanding, it is demonstrated that Mn-promotion poisons the surface WO4 catalytic active sites resulting in surface WO5 sites with retarded kinetics for C-H scission. On the other hand, dimeric Mn2O5 surface sites, identified and studied via ab initio molecular dynamics and thermodynamics, were found to be more efficient in activating CH4 than the poisoned surface WO5 sites or the original WO4 sites. However, the surface reaction intermediates formed from CH4 activation over the Mn2O5 surface sites are more stable than those formed over the Na2WO4 surface sites. The higher stability of the surface intermediates makes their desorption unfavorable, increasing the likelihood of over-oxidation to CO x , in agreement with the experimental findings in the literature on Mn-promoted catalysts. Consequently, the Mn-promoter does not appear to have an essential positive role in synergistically tuning the structure of the Na2WO4 surface sites towards CH4 activation but can yield MnO x surface sites that activate CH4 faster than Na2WO4 surface sites, but unselectively.

New Mechanistic and Reaction Pathway Insights for Oxidative Coupling of Methane (OCM) over Supported Na2 WO4 /SiO2 Catalysts

The complex structure of the catalytic active phase, and surface-gas reaction networks have hindered understanding of the oxidative coupling of methane (OCM) reaction mechanism by supported Na₂ WO₄ /SiO₂ catalysts. The present study demonstrates, with the aid of in situ Raman spectroscopy and chemical probe (H₂ -TPR, TAP and steady-state kinetics) experiments, that the long speculated crystalline Na₂ WO₄ active phase is unstable and melts under OCM reaction conditions, partially transforming to thermally stable surface Na-WO_x sites. Kinetic analysis via temporal analysis of products (TAP) and steady-state OCM reaction studies demonstrate that (i) surface Na-WO_x sites are responsible for selectively activating CH₄ to C₂ H_x and over-oxidizing CH_y to CO and (ii) molten Na₂ WO₄ phase is mainly responsible for over-oxidation of CH₄ to CO₂ and also assists in oxidative dehydrogenation of C₂ H₆ to C₂ H₄ . These new insights reveal the nature of catalytic active sites and resolve the OCM reaction mechanism over supported Na₂ WO₄ /SiO₂ catalysts.

Tungsten-Based Catalysts for Environmental Applications

This review aims to give a general overview of the recent use of tungsten-based catalysts for wide environmental applications, with first some useful background information about tungsten oxides. Tungsten oxide materials exhibit suitable behaviors for surface reactions and catalysis such as acidic properties (mainly Brønsted sites), redox and adsorption properties (due to the presence of oxygen vacancies) and a photostimulation response under visible light (2.6–2.8 eV bandgap). Depending on the operating condition of the catalytic process, each of these behaviors is tunable by controlling structure and morphology (e.g., nanoplates, nanosheets, nanorods, nanowires, nanomesh, microflowers, hollow nanospheres) and/or interactions with other compounds such as conductors (carbon), semiconductors or other oxides (e.g., TiO2) and precious metals. WOx particles can be also dispersed on high specific surface area supports. Based on these behaviors, WO3-based catalysts were developed for numerous environmental applications. This review is divided into five main parts: structure of tungsten-based catalysts, acidity of supported tungsten oxide catalysts, WO3 catalysts for DeNOx applications, total oxidation of volatile organic compounds in gas phase and gas sensors and pollutant remediation in liquid phase (photocatalysis).

Synthesis of Cristobalite Containing Ordered Interstitial Mesopores using Crystallization of Silica Colloidal Crystals

Cristobalite with ordered interstitial dual-sized mesopores was synthesized through the crystallization of silica colloidal crystals composed of monodispersed amorphous silica nanoparticles. An aqueous solution containing both a flux (Na₂ O) and a carbon precursor (an aqueous low-molecular weight phenolic resin) was infiltrated into the interstices of silica colloidal crystals. The organic fraction in the nanocomposite was further polymerized and subsequently carbonized in an Ar flow at 750 °C to reinforce the colloidal crystal structure. The thermal treatment resulted in the crystallization of the colloidal crystals into cristobalite while retaining the porous structure. The cristobalite-carbon nanocomposite was calcined in air to remove the carbon and create interstitial ordered mesopores in the cristobalite. The surfaces of crystalline mesoporous silica are quite different from those of various ordered mesoporous silica with amorphous frameworks; thus, the present findings will be useful for a precise understanding and control of the interfaces between the mesopores and silica networks.

Methane activation by ZSM-5-supported transition metal centers

This review focuses on recent fundamental insights about methane dehydroaromatization (MDA) to benzene over ZSM-5-supported transition metal oxide-based catalysts (MO_x/ZSM-5, where M = V, Cr, Mo, W, Re, Fe). Benzene is an important organic intermediate, used for the synthesis of chemicals like ethylbenzene, cumene, cyclohexane, nitrobenzene and alkylbenzene. Current production of benzene is primarily from crude oil processing, but due to the abundant availability of natural gas, there is much recent interest in developing direct processes to convert CH₄ to liquid chemicals. Among the various gas-to-liquid methods, the thermodynamically-limited Methane DehydroAromatization (MDA) to benzene under non-oxidative conditions appears very promising as it circumvents deep oxidation of CH₄ to CO₂ and does not require the use of a co-reactant. The findings from the MDA catalysis literature is critically analyzed with emphasis on in situ and operando spectroscopic characterization to understand the molecular level details regarding the catalytic sites before and during the MDA reaction. Specifically, this review discusses the anchoring sites of the supported MO_x species on the ZSM-5 support, molecular structures of the initial dispersed surface MO_x sites, nature of the active sites during MDA, reaction mechanisms, rate-determining step, kinetics and catalyst activity of the MDA reaction. Finally, suggestions are given regarding future experimental investigations to fill the information gaps currently found in the literature.

Promotional effect of Mn-doping on the catalytic performance of NiO sheets for the selective oxidation of styrene

The direct oxidation of styrene into high-value chemicals under mild reaction conditions remains a great challenge in both academia and industry. Herein, we report a successful electronic structure modulation of intrinsic NiO sheets via Mn-doping towards the oxidation of styrene. By doping NiO with only a small content of Mn (Mn/Ni atomic ratio of 0.030), a 75.0% yield of STO can be achieved under the optimized reaction conditions, which is 2.13 times higher than that of the pure NiO. In addition, the catalyst exhibits robust stability and good recycling performance. The performance enhancement originates from the synergistic effect regarding the abundant Ni(II) species, the rich oxygen vacancy sites and the large amount of surface redox centers. This work provides new findings of the elemental-doping-induced multifunctionality in designing powerful catalysts for the efficient and selective oxidation of styrene and beyond.

Synthesis and molecular structure of model silica-supported tungsten oxide catalysts for oxidative coupling of methane (OCM)

Catalysts with only dispersed phase Na–WO₄ sites where Na/W < 2 are slightly less active but significantly more C₂ selective than the traditional Na₂WO₄/SiO₂ catalysts that contain a crystalline phase where Na/W = 2.

Oxidative dehydrogenation of propane over transition metal sulfides using sulfur as an alternative oxidant

Sulfur vapor (S₂) is explored as a “soft” oxidant for the selective catalytic dehydrogenation of propane to propylene over a variety of metal sulfide surfaces.