New Mechanistic and Reaction Pathway Insights for Oxidative Coupling of Methane (OCM) over Supported Na2 WO4 /SiO2 Catalysts

Understanding the effect of spatially separated Cu and acid sites in zeolite catalysts on oxidation of methane

Unraveling the effect of spatially separated bifunctional sites on catalytic reactions is significant yet challenging. In this report, we investigate the role of spatial separation on the oxidation of methane in a series of Cu-exchanged aluminosilicate zeolites. Regulation of the bifunctional sites is done either through studying a physical mixture of Cu-exchanged zeolites and acidic zeolites or by systematically varying the Cu and acid density within a family of zeolite materials. We show that separated Cu and acid sites are beneficial for the formation of hydrocarbons while high-density Cu sites, which are closer together, facilitate the production of CO2. By contrast, a balance of the spatial separation of Cu and acid sites shows more favorable formation of methanol. This work will further guide approaches to methane oxidation to methanol and open an avenue for promoting hydrocarbon synthesis using methanol as an intermediate.

Methane-H2S Reforming Catalyzed by Carbon and Metal Sulfide Stabilized Sulfur Dimers

H2S reforming of methane (HRM) provides a potential strategy to directly utilize sour natural gas for the production of COx-free H2 and sulfur chemicals. Several carbon allotropes were found to be active and selective for HRM, while the additional presence of transition metals led to further rate enhancements and outstanding stability (e.g., Ru supported on carbon black). Most metals are transformed to sulfides, but the carbon supports prevent sintering under the harsh reaction conditions. Supported by theoretical calculations, kinetic and isotopic investigations with representative catalysts showed that H2S decomposition and the recombination of surface H atoms are quasi-equilibrated, while the first C-H bond scission is the kinetically relevant step. Theory and experiments jointly establish that dynamically formed surface sulfur dimers are responsible for methane activation and catalytic turnovers on sulfide and carbon surfaces that are otherwise inert without reaction-derived active sites.

General and Scalable Synthesis of Mesoporous 2D MZrO2 (M = Co, Mn, Ni, Cu, Fe) Nanocatalysts by Amorphous-to-Crystalline Transformation

In modern heterogeneous catalysis, it remains highly challenging to create stable, low-cost, mesoporous 2D photo-/electro-catalysts that carry atomically dispersed active sites. In this work, a general shape-preserving amorphous-to-crystalline transformation (ACT) strategy is developed to dope various transition metal (TM) heteroatoms in ZrO2 , which enabled the scalable synthesis of TMs/oxide with a mesoporous 2D structure and rich defects. During the ACT process, the amorphous MZrO2 nanoparticles (M = Fe, Ni, Cu, Co, Mn) are deposited within a confined space created by the NaCl template, and they transform to crystalline 2D ACT-MZrO2 nanosheets in a shape-preserving manner. The interconnected crystalline ACT-MZrO2 nanoparticles thus inherit the same structure as the original MZrO2 precursor. Owing to its rich active sites on the surface and abundant oxygen vacancies (OVs), ACT-CoZrO2 gives superior performance in catalyzing the CO2 -to-syngas conversion as demonstrated by experiments and theoretical calculations. The ACT chemistry opens a general route for the scalable synthesis of advanced catalysts with precise microstructure by reconciliating the control of crystalline morphologies and the dispersion of heteroatoms.

Photodriven Methane Conversion on Transition Metal Oxide Catalyst: Recent Progress and Prospects

Methane as the main component in natural gas is a promising chemical raw material for synthesizing value-added chemicals, but its harsh chemical conversion process often causes severe energy and environment concerns. Photocatalysis provides an attractive path to active and convert methane into various products under mild conditions with clean and sustainable solar energy, although many challenges remain at present. In this review, recent advances in photocatalytic methane conversion are systematically summarized. As the basis of methane conversion, the activation of methane is first elucidated from the structural basis and activation path of methane molecules. The study is committed to categorizing and elucidating the research progress and the laws of the intricate methane conversion reactions according to the target products, including photocatalytic methane partial oxidation, reforming, coupling, combustion, and functionalization. Advanced photocatalytic reactor designs are also designed to enrich the options and reliability of photocatalytic methane conversion performance evaluation. The challenges and prospects of photocatalytic methane conversion are also discussed, which in turn offers guidelines for methane-conversion-related photocatalyst exploration, reaction mechanism investigation, and advanced photoreactor design.

Lithium carbonate-promoted mixed rare earth oxides as a generalized strategy for oxidative coupling of methane with exceptional yields

The oxidative coupling of methane to higher hydrocarbons offers a promising autothermal approach for direct methane conversion, but its progress has been hindered by yield limitations, high temperature requirements, and performance penalties at practical methane partial pressures (~1 atm). In this study, we report a class of Li2CO3-coated mixed rare earth oxides as highly effective redox catalysts for oxidative coupling of methane under a chemical looping scheme. This catalyst achieves a single-pass C2+ yield up to 30.6%, demonstrating stable performance at 700 °C and methane partial pressures up to 1.4 atm. In-situ characterizations and quantum chemistry calculations provide insights into the distinct roles of the mixed oxide core and Li2CO3 shell, as well as the interplay between the Pr oxidation state and active peroxide formation upon Li2CO3 coating. Furthermore, we establish a generalized correlation between Pr4+ content in the mixed lanthanide oxide and hydrocarbons yield, offering a valuable optimization strategy for this class of oxidative coupling of methane redox catalysts.

Maximizing Active Fe Species in ZSM-5 Zeolite Using Organic-Template-Free Synthesis for Efficient Selective Methane Oxidation

The selective oxidation of CH₄ in the aqueous phase to produce valuable chemicals has attracted considerable attention due to its mild reaction conditions and simple process. As the most widely studied catalyst for this reaction, Fe-ZSM-5 demonstrates high intrinsic activity and selectivity; however, Fe-ZSM-5 prepared using conventional methods has a limited number of active Fe sites, resulting in low CH₄ conversion per unit mass of the catalyst. This study reports a facile organic-template-free synthesis strategy that enables the incorporation of more Fe into the zeolite framework with a higher dispersion degree compared to conventional synthesis methods. Because framework Fe incorporated in this way is more readily transformed into isolated extra-framework Fe species under thermal treatment, the overall effect is that Fe-ZSM-5 prepared using this method (Fe-HZ5-TF) has 3 times as many catalytically active sites as conventional Fe-ZSM-5. When used for the selective oxidation of CH₄ with 0.5 M H₂O₂ at 75 °C, Fe-HZ5-TF produced a high C₁ oxygenate yield of 109.4 mmol g_cat^-1 h^-1 (a HCOOH selectivity of 91.1%), surpassing other catalysts reported to date. Spectroscopic characterization and density functional theory calculations revealed that the active sites in Fe-HZ5-TF are mononuclear Fe species in the form of [(H₂O)₃Fe(IV)═O]²⁺ bound to Al pairs in the zeolite framework. This differs from conventional Fe-ZSM-5, where binuclear Fe acts as the active site. Analysis of the catalyst and product evolution during the reaction suggests a radical-driven pathway to explain CH₄ activation at the mononuclear Fe site and subsequent conversion to C₁ oxygenates.

Catalytic Processes to Accelerate Decarbonization in a Net-Zero Carbon World

Reducing carbon dioxide emissions is one of the critical challenges to mitigate global climate change, which is having detrimental impacts on society and the environment. Fossil fuel combustion in transportation, power generation, and industrial processes is the dominant contributor to carbon emissions. Over the past decades, sustainable solutions and strategies have been investigated and developed to enable decarbonization. Catalysis plays an essential role to address this global challenge by increasing energy efficiency, reducing carbon emissions, capturing carbon dioxide, and utilizing clean energy sources to displace fossil fuels. In this Review, the role of catalysis in reducing energy demand was discussed, enhancing process efficiency, displacing carbon-intensive feedstocks and products, and therefore, reducing carbon emissions. Recent advances in catalyst development were summarized, focusing on applications to enhance industrial processes efficiency and enable utilization of clean energy sources. Emerging approaches in catalysis were reviewed, including the manufacture of iron and steel, direct air capture of CO₂ , production of ethylene, ammonia, and sustainable aviation fuels, plastic recycling, and the synthesis of biobased plastics. The Review was concluded with suggested research directions to achieve a carbon net-zero world.

Sr2Fe1.575Mo0.5O6-δ Promotes the Conversion of Methane to Ethylene and Ethane

Oxidative coupling of methane can produce various valuable products, such as ethane and ethylene, and solid oxide electrolysis cells (SOECs) can electrolyze CH₄ to produce C₂H₄ and C₂H₆. In this work, Sr₂Fe_1.575Mo_0.5O_6-δ electrode materials were prepared by impregnation and in situ precipitation, and Sr₂Fe_1.5Mo_0.5O_6-δ was taken as a reference to study the role of metal-oxide interfaces in the catalytic process. When the Fe/Sr₂Fe_1.575Mo_0.5O_6-δ interface is well constructed, the selectivity for C₂ can reach 78.18% at 850 °C with a potential of 1.2 V, and the conversion rate of CH₄ is 11.61%. These results further prove that a well-constructed metal-oxide interface significantly improves the catalytic activity and facilitates the reaction.

Low-Temperature Light-off MnOx-Na2WO4-Based Catalysts: A Step Forward to OCM Process Industrialization

Oxidative coupling of methane (OCM) catalyzed by MnOx-Na2WO4-based catalysts has great industrial potential to convert CH4 directly to C2-3 products, but the high light-off temperature is a big challenge to OCM commercialization. The reaction mechanism studies disclosed that O2/CH4-activation relevant "Mn2+↔Mn3+" redox cycle is tightly linked with the catalyst light-off. One concept is thus put forward that the OCM light-off temperature could be lowered once a "Mn2+↔Mn3+" redox cycle was established to be triggered at low temperature over MnOx-Na2WO4-based catalysts. The relevant studies in recent years are reviewed, showing that the establishment of low-temperature light-off "Mn2+↔Mn3+" redox cycle over the MnOx-Na2WO4-based catalysts indeed works effectively toward a low-temperature light-off OCM process. Moreover, three perspectives for the OCM industrialization are discussed based on this concept, including monolithic catalyst, fluidized-bed method and chemical-looping process.

Oxidative Coupling of Methane: Examining the Inactivity of the MnOx -Na2 WO4 /SiO2 Catalyst at Low Temperature

Oxidative coupling of methane (OCM) catalyzed by MnO_x -Na₂ WO₄ /SiO₂ has great industrial promise to convert methane directly to C_2-3 products, but its high light-off temperature is the most challenging obstacle to commercialization and its working mechanism is still a mystery. We report the discovery of a low-temperature active and selective MnO_x -Na₂ WO₄ /SiO₂ catalyst enriched with Q² units in the SiO₂ carrier, being capable of converting 23 % CH₄ with 72 % C_2-3 selectivity at 660 °C. From experiments and theoretical calculations, a large number of Q² units in the MnO_x -Na₂ WO₄ /SiO₂ catalyst is a trigger for markedly lowering the light-off temperature of the Mn³⁺ ↔Mn²⁺ redox cycle involved in the OCM reaction because of the easy formation of MnSiO₃ . Notably, the MnSiO₃ formation proceeds merely through the SiO₂ -involved reaction in the presence of Na₂ WO₄ : Mn₇ SiO₁₂ +6 SiO₂ ↔7 MnSiO₃ +1.5 O₂ . The Na₂ WO₄ not only drives the light-off of this cycle but also gets it working with substantial selectivity toward C_2-3 products. Our findings shine a light on the rational design of more advanced MnO_x -Na₂ WO₄ based OCM catalysts through establishing new Mn³⁺ ↔Mn²⁺ redox cycles with lowered light-off temperature.

Oxidative coupling of methane-comparisons of MnTiO3-Na2WO4 and MnOx-TiO2-Na2WO4 catalysts on different silica supports

The oxidative coupling of methane (OCM) converts CH₄ to value-added chemicals (C₂₊), such as olefins and paraffin. For a series of MnTiO₃-Na₂WO₄ (MnTiO₃-NW) and MnO_x-TiO₂-Na₂WO₄ (Mn-Ti-NW), the effect of loading of MnTiO₃ or MnO_x-TiO₂, respectively, on two different supports (sol-gel SiO₂ (SG) and commercial fumed SiO₂ (CS)) was examined. The catalyst with the highest C₂₊ yield (21.6% with 60.8% C₂₊ selectivity and 35.6% CH₄ conversion) was 10 wt% MnTiO₃-NW/SG with an olefins/paraffin ratio of 2.2. The catalyst surfaces with low oxygen-binding energies were associated with high CH₄ conversion. Stability tests conducted for over 24 h revealed that SG-supported catalysts were more durable than those on CS because the active phase (especially Na₂WO₄) was more stable in SG than in CS. With the use of SG, the activity of MnTiO₃-NW was not substantially different from that of Mn-Ti-NW, especially at high metal loading.

A combined computational and experimental study of methane activation during oxidative coupling of methane (OCM) by surface metal oxide catalysts

The experimentally validated computational models developed herein, for the first time, show that Mn-promotion does not enhance the activity of the surface Na2WO4 catalytic active sites for CH4 heterolytic dissociation during OCM. Contrary to previous understanding, it is demonstrated that Mn-promotion poisons the surface WO4 catalytic active sites resulting in surface WO5 sites with retarded kinetics for C-H scission. On the other hand, dimeric Mn2O5 surface sites, identified and studied via ab initio molecular dynamics and thermodynamics, were found to be more efficient in activating CH4 than the poisoned surface WO5 sites or the original WO4 sites. However, the surface reaction intermediates formed from CH4 activation over the Mn2O5 surface sites are more stable than those formed over the Na2WO4 surface sites. The higher stability of the surface intermediates makes their desorption unfavorable, increasing the likelihood of over-oxidation to CO x , in agreement with the experimental findings in the literature on Mn-promoted catalysts. Consequently, the Mn-promoter does not appear to have an essential positive role in synergistically tuning the structure of the Na2WO4 surface sites towards CH4 activation but can yield MnO x surface sites that activate CH4 faster than Na2WO4 surface sites, but unselectively.