Ultradeformable Lipid Vesicles Localize Amphotericin B in the Dermis for the Treatment of Infectious Skin Diseases

Paclitaxel-loaded elastic liposomes synthesised by microfluidics technique for enhance transdermal delivery

The inherent flexibility of elastic liposomes (EL) allows them to penetrate the small skin pores and reach the dermal region, making them an optimum candidate for topical drug delivery. Loading chemotherapy in ELs could improve chemotherapy's topical delivery and localise its effect on skin carcinogenic tissues. Chemotherapy-loaded EL can overcome the limitations of conventional administration of chemotherapies and control the distribution to specific areas of the skin. In the current studies, Paclitaxel was utilised to develop Paclitaxel-loaded EL. As an alternative to the conventional manufacturing methods of EL, this study is one of the novel investigations utilising microfluidic systems to examine the potential to enhance and optimise the quality of Els by the microfluidics method. The primary aim was to achieve EL with a size of < 200 nm, high homogeneity, high encapsulation efficiency, and good stability. A phospholipid (DOPC) combined with neutral and anionic edge activators (Tween 80 and sodium taurocholate hydrate) at various lipid-to-edge activator ratios, was used for the manufacturing of the ELs. A preliminary study was performed to study the size, polydispersity (PDI), and stability to determine the optimum microfluidic parameters and lipid-to-edge activator for paclitaxel encapsulation. Furthermore, physiochemical characterisation was performed on the optimised Paclitaxel-loaded EL using a variety of methods, including Dynamic Light Scattering, Fourier Transform Infrared Spectroscopy, Atomic force microscopy, elasticity, encapsulation efficiency, and In vitro release. The results reveal the microfluidics' significant impact in enhancing the EL characteristics of EL, especially small and controllable size, Low PDI, and high encapsulation efficiency. Moreover, the edge activator type and concentration highly affect the EL characteristics. The Tween 80 formulations with optimised concentration provide the most suitable size and higher encapsulation efficiency. The release profile of the formulations showed more immediate release from the EL with higher edge activator concentration and a higher % of the released dug from the Tween 80 formulations.

Anti-leishmanial therapies: overcoming current challenges with emerging therapies

INTRODUCTION

Leishmaniasis, including visceral, cutaneous, and mucocutaneous forms, present a major health challenge in tropical regions. Current antileishmanial medications has significant limitations, creating a critical need for novel therapies that are safe and cost-effective with a shorter duration of treatment.

AREAS COVERED

This review explores the critical aspects of existing antileishmanial therapy and targets for future therapeutic developments. It emphasizes the need for new treatment options due to drug resistance, low success rates, toxicity, and high prices associated with current medications. The different forms of leishmaniasis, their clinical manifestations, the challenges associated with their treatment and emerging treatment options are explored in detail.

EXPERT OPINION

The first anti-leishmanial drug pentavalent antimony (SbV) was invented more than 100 years back. Since then, this compound has been used for all forms of leishmaniasis worldwide. For more than 70-80 years after discovery of SbV, no new antileishmanial drugs were developed, reflecting the lack of interest from academia or pharma industry. All three new treatments (Amphotericin-B, paromomycin and miltefosine) which underwent the clinical trials were repurposed drugs. The current pipeline for antileishmanial drugs is empty, with LXE 408 being the only potential drug reaching phase II clinical trial.

Formulating a Horseradish Extract in Phospholipid Vesicles to Target the Skin

Background/Objectives: Horseradish (Armoracia rusticana L.) roots-largely used in traditional medicine for their multiple therapeutic effects-are a rich source of health-promoting phytochemicals. However, their efficacy can be compromised by low chemical stability and poor bioavailability. Incorporation into phospholipid vesicles is often proposed to tackle this problem. Methods: In this study, a hydroalcoholic extract was produced from horseradish roots. The extract was characterized by UPLC-MS and HPLC-PDA and formulated in conventional liposomes and Penetration Enhancer-containing Vesicles (PEVs) for skin application. Results: The obtained nanovesicles were small in size (<100 nm), negatively charged, uni/bilamellar, and with high values of entrapment efficiency (>85%) for the flavonoids identified in the extract. Both the free and the nanoformulated extract showed optimal biocompatibility, measured as the absence of hemolysis of erythrocytes and absence of cytotoxicity in skin cell lines. Furthermore, the nanoformulations displayed antioxidant activity in vitro. Conclusions: The proposed nananoformulations could be exploited to counteract oxidative stress involved in the pathogenesis and progression of numerous skin disorders.

Leveraging 3D-printed microfluidic micromixers for the continuous manufacture of melatonin loaded SNEDDS with enhanced antioxidant activity and skin permeability

Vesicants are chemical warfare agents (CWAs) capable of causing severe skin damage and systemic toxicity. Melatonin, known for its anti-inflammatory and antioxidant properties, can mitigate the effects of these agents. Self-nano-emulsifying drug delivery systems (SNEDDS) containing a high melatonin concentration (5 %, 50 mg/g) were optimized using a quality-by-design approach from biocompatible, non-irritant excipients with a particle size of about 100 nm. The melatonin-loaded SNEDDS showed a 43-fold greater permeability than a conventional melatonin cream. Chemical stability at ambient temperature (25 °C) was maintained for one year. The preparation of optimised melatonin-loaded SNEDDS using a simple mixing method was compared to microfluidic micromixers. Mixing was successfully achieved using a 3D-printed (fused deposition modeling or stereolithography) T-shaped toroidal microfluidic chip (with a channel geometry optimized by computational fluid dynamics), resulting in a scalable, continuous process for the first time with a substantial reduction in preparation time compared to other conventional mixing approaches. No statistically significant differences were observed in the key quality attributes, such as particle size and melatonin loading, between mixing method till kinetic equilibrium solubility is reached and mixing using the 3D-printed micromixers. This scalable, continuous, cost-effective approach improves the overall efficiency of SNEDDS production, reduces the cost of quality control for multiple batches, and demonstrates the potential of continuous microfluidic manufacture with readily customizable 3D-printed micromixers at points of care, such as military bases.

Unraveling the Impact of the Oil Phase on the Physicochemical Stability and Skin Permeability of Melatonin Gel Formulations

Melatonin's antioxidant properties make it a valuable component in anti-aging semisolid topical products. This study explores the role of Pemulen®, an acrylic-based viscosifying agent, in stabilizing cream-gel formulations. Remarkably, even at low concentrations (0.4%), Pemulen® successfully produced physicochemical stable topical formulations. In this work, the impact of the ratio of the oily phase-comprising olive oil and isopropyl myristate from 0 to 20%-was investigated to understand the internal microstructure effect on skin permeability, rheological properties, and stability. The formulations exhibited pseudoplastic behavior, with a significant positive correlation (p-value < 0.1) between the oily phase ratio, viscosity, spreadability, skin adhesiveness, and permeability. Formulations without the oil phase exhibited greater skin permeability. However, higher oily phase content enhanced viscosity, spreadability, and skin adhesion. Given that melatonin primarily degrades through oxidation, incorporating antioxidant excipients in semisolid formulations is crucial for maintaining its chemical stability. A quality by design (QbD) approach was used to assess the impact of four excipients-(a) DL-α-tocopheryl acetate (0.05%), (b) ascorbic acid (0.1%), (c) ethylene diamine tetraacetic acid (0.1%), and (d) sodium metabisulphite (0.5%)-on melatonin's stability. Our findings indicate that maintaining the physical stability of the formulation with a 20% oil phase is more critical for protecting melatonin from oxidation than merely adding antioxidant excipients.

Enhancing the Topical Antibacterial Activity of Fusidic Acid via Embedding into Cinnamon Oil Nano-Lipid Carrier

Presently, antimicrobial resistance is of great risk to remarkable improvements in health conditions and infection management. Resistance to various antibiotics has been considered a great obstacle in their usage, necessitating alternative strategies for enhancing the antibacterial effect. Combination therapy has been recognized as a considerable strategy that could improve the therapeutic influence of antibacterial agents. Therefore, the aim of this study was to combine the antibacterial action of compounds of natural origin like fusidic acid (FA) and cinnamon essential oil (CEO) for synergistic effects. A distinctive nanoemulsion (NE) was developed using cinnamon oil loaded with FA. Applying the Box-Behnken design (BBD) approach, one optimized formula was selected and integrated into a gel base to provide an FA-NE-hydrogel for optimal topical application. The FA-NE-hydrogel was examined physically, studied for in vitro release, and investigated for stability upon storage at different conditions, at room (25 °C) and refrigerator (4 °C) temperatures, for up to 3 months. Ultimately, the NE-hydrogel preparation was inspected for its antibacterial behavior using multidrug-resistant bacteria and checked by scanning electron microscopy. The FA-NE-hydrogel formulation demonstrated a pH (6.32), viscosity (12,680 cP), and spreadability (56.7 mm) that are acceptable for topical application. The in vitro release could be extended for 6 h, providing 52.0%. The formulation was stable under both test conditions for up to 3 months of storage. Finally, the FA-NE-hydrogel was found to inhibit the bacterial growth of not only Gram-positive but also Gram-negative bacteria. The inhibition was further elucidated by a scanning electron micrograph, indicating the efficiency of CEO in enhancing the antibacterial influence of FA when combined in an NE system.

Local amphotericin B therapy for Cutaneous Leishmaniasis: A systematic review

BACKGROUND

Cutaneous leishmaniasis (CL) is characterized by potentially disfiguring skin ulcers carrying significant social stigma. To mitigate systemic drug exposure and reduce the toxicity from available treatments, studies addressing new local therapeutic strategies using available medications are coming up. This review systematically compiles preclinical and clinical data on the efficacy of amphotericin B (AmB) administered locally for cutaneous leishmaniasis.

METHODOLOGY

Structured searches were conducted in major databases. Clinical studies reporting cure rates and preclinical studies presenting any efficacy outcome were included. Exclusion criteria comprised nonoriginal studies, in vitro investigations, studies with fewer than 10 treated patients, and those evaluating AmB in combination with other antileishmanial drug components.

PRINCIPAL FINDINGS

A total of 21 studies were identified, encompassing 16 preclinical and five clinical studies. Preclinical assessments generally involved the topical use of commercial AmB formulations, often in conjunction with carriers or controlled release systems. However, the variation in the treatment schedules hindered direct comparisons. In clinical studies, topical AmB achieved a pooled cure rate of 45.6% [CI: 27.5-64.8%; I2 = 79.7; p = 0.002), while intralesional (IL) administration resulted in a 69.8% cure rate [CI: 52.3-82.9%; I2 = 63.9; p = 0.06). In the direct comparison available, no significant difference was noted between AmB-IL and meglumine antimoniate-IL administration (OR:1.7; CI:0.34-9.15, I2 = 79.1; p = 0.00), however a very low certainty of evidence was verified.

CONCLUSIONS

Different AmB formulations and administration routes have been explored in preclinical and clinical studies. Developing therapeutic technologies is evident. Current findings might be interpreted as a favorable proof of concept for the local AmB administration which makes this intervention eligible to be explored in future well-designed studies towards less toxic treatments for leishmaniasis.

Guiding Clinical Prescription of Topical Extemporaneous Formulations of Sodium Cromoglycate Based on Pharmaceutical Performance

Cromoglycate (SCG) is widely used for allergy processes, and inflammatory states acting as a mast cell membrane stabilizer that inhibits the histamine and mediator release. Currently, SCG topical extemporaneous compounding formulations are prepared in hospitals and community pharmacies, as no industrial fabricated medicines are available in Spain. The stability of these formulations is unknown. Additionally, there are no clear guidelines on which concentration and vehicle are more suitable to enhance permeation across the skin. In this work, the stability of commonly prescribed topical SCG formulations in clinical practice was evaluated. Different vehicles commonly employed by pharmacists daily for formulating topical SCG were investigated (Eucerinum, Acofar Creamgel, and Beeler's base) at different concentrations, ranging from 0.2 to 2%. The stability of topical extemporaneous compounded SCG formulations can be extended for up to three months at room temperature (25 °C). Creamgel 2% formulations significantly improved the topical permeation of SCG across the skin, being 4.5-fold higher than formulations prepared with Beeler's base. The reason attributed to this performance can be related to the lower droplet size formed upon dilution in aqueous media combined with a lower viscosity, which facilitates its application and extensibility on the skin. The higher the SCG concentration in Creamgel formulations, the higher the permeability across both synthetic membranes and pig skin (p-value < 0.05). These preliminary results can be used as a guide to prompt a rational prescription of topical SCG formulations.

Unraveling the pharmaceutical and clinical relevance of the influence of syringic acid loaded linoleic acid transferosomes on acne

Natural medicines are promising platforms for competent topical treatment modalities benefiting the cosmetic implementation and proffering solutions to the current remedies. Therefore, the objective of this study was to formulate syringic acid (SA), well-known for its multilateral anti-inflammatory, antimicrobial and antioxidant potentials, in newly developed linoleic acid (LA) transferosomes as an anti-acne nano-form remedy. Herein, LA was incorporated in transferosomes owing to its antimicrobial effect and dermal penetrability. Comprehensive appraisal through physicochemical, antioxidant and dermal deposition investigations was conducted. Clinical assessment was also performed in acne patients and compared with the marketed product (Adapalene® gel). The relevant investigations of the optimum formula indicated stable vesicles with a small-sized diameter (147.46 nm), surface charge (-26.86 mV), spherical architecture, reasonable entrapment (76.63%), considerable antioxidant activity (IC50 = 11.1 µg/mL) and remarkable skin deposition (78.72%).More importantly, LA based transferosomes enclosing SA exhibited inflammation lessening in acne sufferers as manifested by greater reduction in the total count of the acne lesions reaching 79.5% in contrast to Adapalene® gel with only 18.7% reduction in acne lesions. Interestingly, no irritation and erythema were reported for the proposed transferosomes. Inclusively, the cosmetic formulation practice could reap benefits of the development of such vesicles.

Exploration of novel drug delivery systems in topical management of osteoarthritis

Osteoarthritis is one of the foremost disabling disorders in the world. There is no definitive treatment to prevent the progression of osteoarthritis. Hence, palliative treatment aims at minimizing pain, disability and improving function, performance and quality of life. Oral administration of nonsteroidal anti-inflammatory drug is associated with number of adverse effects and reduced therapeutic efficacy. Intra-articular injection has been the preferred route of drug administration. However, the clearance of drug from the arthritic site, risk of infections, cost and the pain associated with frequent injections make this route highly non-compliant to patients. Since osteoarthritis is a chronic condition which requires treatment for prolonged duration, there is an urgent need for another administration route which circumvents the hindrances linked with intra-articular route. Transdermal route across the skin locally at the osteoarthritis site could help in surpassing the disadvantages associated with intra-articular route. However, traversing skin barrier and reaching the chondrocytes with sufficient amount of the drug is extremely difficult. Nanocarrier-based approaches could hold an answer to the said shortcomings owing to their reduced size, targeting tunability and site specificity. In this article, we discuss the pathophysiology of osteoarthritis, molecular targets, and utilization of nanocarrier-based approaches to strategize the treatment of osteoarthritis in a new direction, i.e. topical delivery of nanocarriers in osteoarthritis.

3D Printing Technologies in Personalized Medicine, Nanomedicines, and Biopharmaceuticals

3D printing technologies enable medicine customization adapted to patients' needs. There are several 3D printing techniques available, but majority of dosage forms and medical devices are printed using nozzle-based extrusion, laser-writing systems, and powder binder jetting. 3D printing has been demonstrated for a broad range of applications in development and targeting solid, semi-solid, and locally applied or implanted medicines. 3D-printed solid dosage forms allow the combination of one or more drugs within the same solid dosage form to improve patient compliance, facilitate deglutition, tailor the release profile, or fabricate new medicines for which no dosage form is available. Sustained-release 3D-printed implants, stents, and medical devices have been used mainly for joint replacement therapies, medical prostheses, and cardiovascular applications. Locally applied medicines, such as wound dressing, microneedles, and medicated contact lenses, have also been manufactured using 3D printing techniques. The challenge is to select the 3D printing technique most suitable for each application and the type of pharmaceutical ink that should be developed that possesses the required physicochemical and biological performance. The integration of biopharmaceuticals and nanotechnology-based drugs along with 3D printing ("nanoprinting") brings printed personalized nanomedicines within the most innovative perspectives for the coming years. Continuous manufacturing through the use of 3D-printed microfluidic chips facilitates their translation into clinical practice.

Localized Delivery of Bioactives using Structured Liposomal Gels

Liposomes have gained a lot of interest for drug delivery applications, and some of these preparations have been commercialized. These are formulated with biocompatible components and can be used for delivering a wide range of payloads differing in aqueous solubility and molecular weight. Liposome-based delivery approaches are limited mainly by two factors: (a) poor dispersion stability, and (b) pre-mature leakage of payloads. In this review, we have discussed the stabilization of liposomal vesicles by their entrapment in hydrogels. Studies reveal that such hydrogels can maintain the structural integrity of liposomes. Release of liposomes from the hydrogel network can be modulated through careful screening of matrix former and degree of its cross-linking. Accordingly, we have reviewed the approaches of stabilizing liposomal vesicles through entrapment in hydrogels. Application of liposome-embedded hydrogels has been reviewed in context of localized drug delivery. Our discussion is focussed on the delivery of bioactives to the skin. Such an approach appears alluring from the standpoint of minimizing the undesirable distribution of payload(s) the systemic circulation and off-target sites.

Liposomal Amphotericin B for Treatment of Leishmaniasis: From the Identification of Critical Physicochemical Attributes to the Design of Effective Topical and Oral Formulations

The liposomal amphotericin B (AmB) formulation, AmBisome^®, still represents the best therapeutic option for cutaneous and visceral leishmaniasis. However, its clinical efficacy depends on the patient's immunological status, the clinical manifestation and the endemic region. Moreover, the need for parenteral administration, its side effects and high cost significantly limit its use in developing countries. This review reports the progress achieved thus far toward the understanding of the mechanism responsible for the reduced toxicity of liposomal AmB formulations and the factors that influence their efficacy against leishmaniasis. It also presents the recent advances in the development of more effective liposomal AmB formulations, including topical and oral liposome formulations. The critical role of the AmB aggregation state and release rate in the reduction of drug toxicity and in the drug efficacy by non-invasive routes is emphasized. This paper is expected to guide future research and development of innovative liposomal formulations of AmB.

Microfluidic Manufacture of Lipid-Based Nanomedicines

Nanoparticulate technologies have revolutionized drug delivery allowing for passive and active targeting, altered biodistribution, controlled drug release (temporospatial or triggered), enhanced stability, improved solubilization capacity, and a reduction in dose and adverse effects. However, their manufacture remains immature, and challenges exist on an industrial scale due to high batch-to-batch variability hindering their clinical translation. Lipid-based nanomedicines remain the most widely approved nanomedicines, and their current manufacturing methods remain discontinuous and face several problems such as high batch-to-batch variability affecting the critical quality attributes (CQAs) of the product, laborious multistep processes, need for an expert workforce, and not being easily amenable to industrial scale-up involving typically a complex process control. Several techniques have emerged in recent years for nanomedicine manufacture, but a paradigm shift occurred when microfluidic strategies able to mix fluids in channels with dimensions of tens of micrometers and small volumes of liquid reagents in a highly controlled manner to form nanoparticles with tunable and reproducible structure were employed. In this review, we summarize the recent advancements in the manufacturing of lipid-based nanomedicines using microfluidics with particular emphasis on the parameters that govern the control of CQAs of final nanomedicines. The impact of microfluidic environments on formation dynamics of nanomaterials, and the application of microdevices as platforms for nanomaterial screening are also discussed.

Solid Nanomedicines of Nifurtimox and Benznidazole for the Oral Treatment of Chagas Disease

Chagas disease (CD) is a parasitic zoonosis endemic in Central and South America affecting nearly 10 million people, with 100 million people at high risk of contracting the disease. Treatment is only effective when received at the early stages of the disease and it involved two drugs (nifurtimox (NFX) and benznidazole (BNZ)). Both treatments require multiple daily administrations of high doses, suffer from variable efficacy and insufficient efficacy in chronic CD, many side effects, and a very long duration of treatment that results in poor compliance, while combined available therapies that lead to reduced duration of treatment are not available and polypharmacy reduces compliance and increases the cost further. Here we present self-nanoemulsified drug delivery systems (SNEDDS) able to produce easily scalable combined formulations of NFX and BNZ that can allow for tailoring of the dose and can be easily converted to oral solid dosage form by impregnation on mesoporous silica particles. SNEDDS demonstrated an enhanced solubilisation capacity for both drugs as demonstrated by flow-through studies and in vitro lipolysis studies. High loading of SNEDDS to Syloid 244 and 3050 silicas (2:1 w/w) allowed clinically translatable amounts of both NFX and BNZ to be loaded. Tablets prepared from NFX-BNZ combined SNEDDS loaded on Syloid 3050 silicas demonstration near complete dissolution in the flow through cell apparatus compared to NFX and BNZ commercial tablets respectively (Lampit^® and Rochagan^®). NFX-BNZ-SNEDDS demonstrated nanomolar efficacy in epimastigotes and amastigotes of T. cruzi with acceptable selectivity indexes and demonstrated enhanced survival and reduced parasitaemia in acute murine experimental models of CD. Thus, the results presented here illustrate the ability for an easily scalable and personalised combination oral therapy prepared from GRAS excipients, enabling treatment access worldwide for the treatment of CD.

Self-assembling, supramolecular chemistry and pharmacology of amphotericin B: Poly-aggregates, oligomers and monomers

Antifungal drugs such as amphotericin B (AmB) interact with lipids and phospholipids located on fungal cell membranes to disrupt them and create pores, leading to cell apoptosis and therefore efficacy. At the same time, the interaction can also take place with cell components from mammalian cells, leading to toxicity. AmB was selected as a model antifungal drug due to the complexity of its supramolecular chemical structure which can self-assemble in three different aggregation states in aqueous media: monomer, oligomer (also known as dimer) and poly-aggregate. The interplay between AmB self-assembly and its efficacy or toxicity against fungal or mammalian cells is not yet fully understood. To the best of our knowledge, this is the first report that investigates the role of excipients in the supramolecular chemistry of AmB and the impact on its biological activity and toxicity. The monomeric state was obtained by complexation with cyclodextrins resulting in the most toxic state, which was attributed to the greater production of highly reactive oxygen species upon disruption of mammalian cell membranes, a less specific mechanism of action compared to the binding to the ergosterol located in fungal cell membranes. The interaction between AmB and sodium deoxycholate resulted in the oligomeric and poly-aggregated forms which bound more selectively to the ergosterol of fungal cell membranes. NMR combined with XRD studies elucidated the interaction between drug and excipient to achieve the AmB aggregation states, and ultimately, their diffusivity across membranes. A linear correlation between particle size and the efficacy/toxicity ratio was established allowing to modulate the biological effect of the drug and hence, to improve pharmacological regimens. However, particle size is not the only factor modulating the biological response but also the equilibrium of each state which dictates the fraction of free monomeric form available. Tuning the aggregation state of AmB formulations is a promising strategy to trigger a more selective response against fungal cells and to reduce the toxicity in mammalian cells.

Transfersomes as alternative topical nanodosage forms for the treatment of skin disorders

Topical drug delivery is a promising approach to treat different skin disorders. However, it remains a challenge mainly due to the nature and rigidity of the nanosystems, which limit deep skin penetration, and the unsuccessful demonstration of clinical benefits; greater penetration by itself, does not ensure pharmacological success. In this context, transfersomes have appeared as promising nanosystems; deformability, their unique characteristic, allows them to pass through the epidermal microenvironment, improving the skin drug delivery. This review focuses on the comparison of transfersomes with other nanosystems (e.g., liposomes), discusses recent therapeutic applications for the topical treatment of different skin disorders and highlights the need for further studies to demonstrate significant clinical benefits of transfersomes compared with conventional therapies.

Transfersomes improved delivery of ascorbic palmitate into the viable epidermis for enhanced treatment of melasma

Ascorbic palmitate (AP) is widely used in the topical pharmaceutical or cosmetic formulations for melasma treatment. However, the presence of the skin barriers makes it difficult for the highly lipophilic drug molecules to traverse the stratum corneum (SC) and diffuse into the viable epidermis (EP) to reach the melanocytes, thereby exerting suboptimal antimelasma effects. Herein, AP was encapsulated into the transfersomes (TFs), yielding AP-TFs. AP-TFs utilized the deformability of TFs to squeeze through the skin pores in the SC under the transepidermal hydration gradient forces, leading to 14.1-fold increase in AP accumulation to the EP. AP-TFs could slowly release the encapsulated AP, while whether the released AP or transfersomal AP showed comparable uptake into the melanocytes, thereby exerting similar inhibitory effects on tyrosinase activity and melanogenesis. Ultimately, in the rat melasma model, AP-TFs showed superior antimelasma efficacy to free AP, with effective relief of oxidative stress and inflammation in the skin. Moreover, AP-TFs did not induce skin irritation. Therefore, the study provides a safe and effective approach to elevating the delivery of highly lipophilic drugs to the EP for enhanced treatment of melasma.

Ultradeformable vesicles: concepts and applications relating to the delivery of skin cosmetics

Skin aging is a phenomenon resulting in reduced self-confidence, thus becoming a major factor in social determinants of health. The use of active cosmetic ingredients can help prevent skin aging. Transfersomes are well known to be capable of deeply penetrating the dermis. This scoping review provides an insight into transfersomes and their prospective use in anti-aging cosmetics. Numerous reports exist highlighting the successful skin delivery of therapeutic agents such as high-molecular-weight, poorly water soluble and poorly permeable active ingredients by means of transfersomes. Moreover, in vitro and in vivo studies have indicated that transfersomes increase the deposition, penetration and efficacy of active ingredients. However, the use of transfersomes in the delivery of active cosmetic ingredients is limited. Considering their similar physicochemical properties, transfersomes should possess considerable potential as a delivery system for anti-aging cosmetics.

Phytosomes as an Emerging Nanotechnology Platform for the Topical Delivery of Bioactive Phytochemicals

The emergence of phytosome nanotechnology has a potential impact in the field of drug delivery and could revolutionize the current state of topical bioactive phytochemicals delivery. The main challenge facing the translation of the therapeutic activity of phytochemicals to a clinical setting is the extremely low absorption rate and poor penetration across biological barriers (i.e., the skin). Phytosomes as lipid-based nanocarriers play a crucial function in the enhancement of pharmacokinetic and pharmacodynamic properties of herbal-originated polyphenolic compounds, and make this nanotechnology a promising tool for the development of new topical formulations. The implementation of this nanosized delivery system could enhance the penetration of phytochemicals across biological barriers due to their unique physiochemical characteristics, improving their bioavailability. In this review, we provide an outlook on the current knowledge of the biological barriers of phytoconstituents topical applications. The great potential of the emerging nanotechnology in the delivery of bioactive phytochemicals is reviewed, with particular focus on phytosomes as an innovative lipid-based nanocarrier. Additionally, we compared phytosomes with liposomes as the gold standard of lipid-based nanocarriers for the topical delivery of phytochemicals. Finally, the advantages of phytosomes in topical applications are discussed.

Delivery strategies of amphotericin B for invasive fungal infections

Invasive fungal infections (IFIs) represent a growing public concern for clinicians to manage in many medical settings, with substantial associated morbidities and mortalities. Among many current therapeutic options for the treatment of IFIs, amphotericin B (AmB) is the most frequently used drug. AmB is considered as a first-line drug in the clinic that has strong antifungal activity and less resistance. In this review, we summarized the most promising research efforts on nanocarriers for AmB delivery and highlighted their efficacy and safety for treating IFIs. We have also discussed the mechanism of actions of AmB, rationale for treating IFIs, and recent advances in formulating AmB for clinical use. Finally, this review discusses some practical considerations and provides recommendations for future studies in applying AmB for combating IFIs.

Macrophage targeting with the novel carbopol-based miltefosine-loaded transfersomal gel for the treatment of cutaneous leishmaniasis: in vitro and in vivo analyses

OBJECTIVE

The purpose of this study was to develop novel carbopol-based miltefosine-loaded transfersomal gel (HePCTG) for the treatment of cutaneous leishmaniasis (CL) via efficient targeting of leishmania infected macrophages.

METHODS

Miltefosine-loaded transfersomes (HePCT) were prepared by ethanol injection method followed by their incorporation into carbopol gel to form HePCTG. The prepared HePCT were assessed for physicochemical properties including mean particle size, polydispersity index, zeta potential, entrapment efficiency, morphology, and deformability. Similarly, HePCTG was evaluated for physiochemical and rheological attributes. The in vitro release, skin permeation, skin irritation, anti-leishmanial activity, and in vivo efficacy in BALB/c mice against infected macrophages were also performed for HePCT.

RESULTS

The optimized HePCT displayed a particle size of 168 nm with entrapment efficiency of 92%. HePCTG showed suitable viscosity, pH, and sustained release of the incorporated drug. Furthermore, HePCT and HePCTG demonstrated higher skin permeation than drug solution. The results of macrophage uptake study indicated improved drug intake by passive diffusion. The lower half maximal inhibitory concentration value, selectivity index and higher 50% cytotoxic concentration  value of HePCT compared to that of HePC solution demonstrated the improved anti-leishmanial efficacy and non-toxicity of the formulation. This was further confirmed by the notable reduction in parasite load and lesion size observed in in vivo anti-leishmanial study.

CONCLUSION

It can be stated that the formulated HePCTG can effectively be used for the treatment of CL.

Hydrogels as Drug Delivery Systems: A Review of Current Characterization and Evaluation Techniques

Owing to their tunable properties, controllable degradation, and ability to protect labile drugs, hydrogels are increasingly investigated as local drug delivery systems. However, a lack of standardized methodologies used to characterize and evaluate drug release poses significant difficulties when comparing findings from different investigations, preventing an accurate assessment of systems. Here, we review the commonly used analytical techniques for drug detection and quantification from hydrogel delivery systems. The experimental conditions of drug release in saline solutions and their impact are discussed, along with the main mathematical and statistical approaches to characterize drug release profiles. We also review methods to determine drug diffusion coefficients and in vitro and in vivo models used to assess drug release and efficacy with the goal to provide guidelines and harmonized practices when investigating novel hydrogel drug delivery systems.