Dispersity under Scrutiny: Phase Behavior Differences between Disperse and Discrete Low Molecular Weight Block Co-Oligomers

Antibacterial Nanoplatelets via Crystallization-Driven Self-Assembly of Poly(l-lactide)-Based Block Copolymers

Membrane-active antimicrobial materials are promising substances to fight antimicrobial resistance. Herein, crystallization-driven self-assembly (CDSA) is employed for the preparation of nanoparticles with different morphologies, and their bioactivity is explored. Block copolymers (BCPs) featuring a crystallizable and antimicrobial block were synthesized using a combination of ring-opening and photoiniferter RAFT polymerizations. Subsequently formed nanostructures formed by CDSA could not be deprotected without degradation of the structures. CDSA of deprotected BCPs yielded 2D diamond-shaped nanoplatelets in MeOH, while spherical nanostructures were observed for assembly in water. Platelets exhibited improved antibacterial capabilities against two Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa) compared to their spherical counterparts. The absence of hemolytic activity leads to the excellent selectivity of platelets. A mechanism based on membrane permeabilization was confirmed via dye-leakage assays. This study emphasized the impact of the shape of nanostructures on their interaction with bacterial cells and how a controlled assembly can improve bioactivity.

Telechelic sequence-defined oligoamides: their step-economical synthesis, depolymerization and use in polymer networks

The application of sequence-defined macromolecules in material science remains largely unexplored due to their challenging, low yielding and time-consuming synthesis. This work first describes a step-economical method for synthesizing unnatural sequence-defined oligoamides through fluorenylmethyloxycarbonyl chemistry. The use of a monodisperse soluble support enables homogeneous reactions at elevated temperature (up to 65 °C), leading to rapid coupling times (<10 min) and improved synthesis protocols. Moreover, a one-pot procedure for the two involved iterative steps is demonstrated via an intermediate quenching step, eliminating the need for in-between purification. The protocol is optimized using γ-aminobutyric acid (GABA) as initial amino acid, and the unique ability of the resulting oligomers to depolymerize, with the formation of cyclic γ-butyrolactame, is evidenced. Furthermore, in order to demonstrate the versatility of the present protocol, a library of 17 unnatural amino acid monomers is synthesized, starting from the readily available GABA-derivative 4-amino-2-hydroxybutanoic acid, and then used to create multifunctional tetramers. Notably, the obtained tetramers show higher thermal stability than a similar thiolactone-based sequence-defined macromolecule, which enables its exploration within a material context. To that end, a bidirectional growth approach is proposed as a greener alternative that reduces the number of synthetic steps to obtain telechelic sequence-defined oligoamides. The latter are finally used as macromers for the preparation of polymer networks. We expect this strategy to pave the way for the further exploration of sequence-defined macromolecules in material science.

Beauty of Explicit Dispersity (Đ) Equations in Controlled Polymerizations

Dispersity (Đ) as a critical parameter indicates the level of uniformity of the polymer molar mass or chain length. In the past several decades, the development of explicit equations for calculating Đ experiences a continual revolution. This viewpoint tracks the historical evolution of the explicit equations from living to reversible-deactivation polymerization systems. Emphasis is laid on displaying the charm of explicit Đ equations in batch reversible-deactivation radical polymerization (RDRP), with highlights of the relevant elegant mathematical manipulations. Some representative emerging applications enabled by the existing explicit equations are shown, involving nitroxide-mediated polymerization (NMP), atom transfer radical polymerization (ATRP), and reversible addition-fragmentation chain transfer (RAFT) polymerization systems. Stemming from the several outlined challenges and outlooks, sustained concerns about the explicit Đ equations are still highly deserved. It is expected that these equations will continue to play an important role not only in traditional polymerization kinetic simulation and design of experiments but also in modern intelligent manufacturing of precision polymers and classroom education.

Fabrication of Ultrafine, Highly Ordered Nanostructures Using Carbohydrate-Inorganic Hybrid Block Copolymers

Block copolymers (BCPs) have garnered considerable interest due to their ability to form microphase-separated structures suitable for nanofabrication. For these applications, it is critical to achieve both sufficient etch selectivity and a small domain size. To meet both requirements concurrently, we propose the use of oligosaccharide and oligodimethylsiloxane as hydrophilic and etch-resistant hydrophobic inorganic blocks, respectively, to build up a novel BCP system, i.e., carbohydrate-inorganic hybrid BCP. The carbohydrate-inorganic hybrid BCPs were synthesized via a click reaction between oligodimethylsiloxane with an azido group at each chain end and propargyl-functionalized maltooligosaccharide (consisting of one, two, and three glucose units). In the bulk state, small-angle X-ray scattering revealed that these BCPs microphase separated into gyroid, asymmetric lamellar, and symmetric lamellar structures with domain-spacing ranging from 5.0 to 5.9 nm depending on the volume fraction. Additionally, we investigated microphase-separated structures in the thin film state and discovered that the BCP with the most asymmetric composition formed an ultrafine and highly oriented gyroid structure as well as in the bulk state. After reactive ion etching, the gyroid thin film was transformed into a nanoporous-structured gyroid SiO2 material, demonstrating the material's promising potential as nanotemplates.

Topologically Precise and Discrete Bottlebrush Polymers: Synthesis, Characterization, and Structure-Property Relationships

As the complexity of polymer structure grows, so do the challenges for developing an accurate understanding of their structure-property relationships. Here, the synthesis of bottlebrush polymers with topologically precise and fully discrete structures is reported. A key feature of the strategy is the synthesis of discrete macromonomer libraries for their polymerization into topologically precise bottlebrushes that can be separated into discrete bottlebrushes (Đ = 1.0). As the system becomes more discrete, packing efficiency increases, distinct three-phase Langmuir-Blodgett isotherms are observed, and its glass transition temperature becomes responsive to side-chain sequence. Overall, this work presents a versatile strategy to access a range of precision bottlebrush polymers and unravels the impact of side-chain topology on their macroscopic properties. Precise control over side chains opens a pathway for tailoring polymer properties without changing their chemical makeup.

Versatile strategies to tailor the glass transition temperatures of bottlebrush polymers

The glass transition temperature (Tg) of bottlebrush polymers can be controlled via side-chain length, blend composition and brush topology. Elucidating interactions between these parameters and their design rules enables accurate targeting of Tg at arbitrary molecular weights.

Sub-5 nm homeotropically aligned columnar structures of hybrids constructed by porphyrin and oligo(dimethylsiloxane)

A series of tetraphenylporphyrin-based thermotropic liquid crystals containing oligo(dimethylsiloxane) were synthesized. These disc-coil hybrids form ordered nanostructures with periodic sizes on the sub-5 nm scale, including oblique columnar, lamellar, and hexagonal columnar phases. Films with sub-5 nm line patterns and homeotropically aligned columnar structures can be obtained by substrate-induced self-assembly.

Dispersity within Brushes Plays a Major Role in Determining Their Interfacial Properties: The Case of Oligoxazoline-Based Graft Polymers

Many synthetic polymers used to form polymer-brush films feature a main backbone with functional, oligomeric side chains. While the structure of such graft polymers mimics biomacromolecules to an extent, it lacks the monodispersity and structural purity present in nature. Here we demonstrate that side-chain heterogeneity within graft polymers significantly influences hydration and the occurrence of hydrophobic interactions in the subsequently formed brushes and consequently impacts fundamental interfacial properties. This is demonstrated for the case of poly(methacrylate)s (PMAs) presenting oligomeric side chains of different length (n) and dispersity. A precise tuning of brush structure was achieved by first synthesizing oligo(2-ethyl-2-oxazoline) methacrylates (OEOXMAs) by cationic ring-opening polymerization (CROP), subsequently purifying them into discrete macromonomers with distinct values of n by column chromatography, and finally obtaining poly[oligo(2-ethyl-2-oxazoline) methacrylate]s (POEOXMAs) by reversible addition-fragmentation chain-transfer (RAFT) polymerization. Assembly of POEOXMA on Au surfaces yielded graft polymer brushes with different side-chain dispersities and lengths, whose properties were thoroughly investigated by a combination of variable angle spectroscopic ellipsometry (VASE), quartz crystal microbalance with dissipation (QCMD), and atomic force microscopy (AFM) methods. Side-chain dispersity, or dispersity within brushes, leads to assemblies that are more hydrated, less adhesive, and more lubricious and biopassive compared to analogous films obtained from graft polymers characterized by a homogeneous structure.

Precisely Encoding Geometric Features into Discrete Linear Polymer Chains for Robust Structural Engineering

Molecular shape is an essential parameter that regulates the self-organization and recognition process, which has not yet been well appreciated and exploited in block polymers due to the lack of precise and efficient modulation methods. This work (i) develops a robust approach to break the intrinsic symmetry of linear polymers by introducing geometric features into otherwise homogeneous chains and (ii) quantitatively highlights the critical contribution of molecular geometry/architecture to the self-assembly behaviors. Iteratively connecting homologous monomers of different side chains according to pre-designed sequences generates discrete polymers with exact chemical structure, uniform chain length, and programmable side-chain gradient along the backbone, which transcribes into diverse shapes. The precise chemistry eliminates all the defects and heterogeneities, providing a delicate platform for fundamental inquiries into the role of molecular geometry. A rich collection of unconventional complex phases, including Frank-Kasper A15 and σ phases, as well as a dodecagonal quasicrystal phase, were captured in these rigorous single-component systems. The self-assembly behaviors are strikingly sensitive to subtle variations of geometry, such that simply migrating a few methylene units among the side chains would generate substantial differences in lattice size or phase stability, or even trigger a phase transition toward distinct structures. The phenomena can be rationalized with a geometric argument that nonuniform side chain distribution leads to conformational mismatch between two immiscible blocks, resulting in varied interfacial curvatures and distinct lattice symmetries. The profound contribution demonstrates that molecular geometry is an effective and robust parameter for structural engineering.

Influence of Molecular Weight Distribution on the Thermoresponsive Transition of Poly(N-isopropylacrylamide)

A series of poly(N-isopropylacrylamide) (PNIPAm) homopolymers with narrow molecular weight distributions (MWDs) is prepared via photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The thermal transition temperature of these polymer samples is analyzed via turbidity measurements in water/N,N'-dimethylformamide mixtures, which show that the cloud point temperatures are inversely proportional to the weight average molecular weight (M_w ). Binary mixtures of the narrowly distributed PNIPAm samples are also prepared and the statistical parameters for the MWDs of these blends are determined. Very interestingly, for binary blends of the PNIPAm samples, the thermoresponsive transition is not only dependent on the M_w , which has been shown previously, but also on higher order statistical parameters of the MWDs. Specifically, at very high values of skewness and kurtosis, the polymer blends deviate from a single sharp thermoresponsive transition toward a broader thermal response, and eventually to a regime of two more distinct transitions. This work highlights the importance of in-depth characterization of polymer MWDs for thermoresponsive polymers.

Oligodimethylsiloxane-Oligoproline Block Co-Oligomers: the Interplay between Aggregation and Phase Segregation in Bulk and Solution

Discrete block co-oligomers (BCOs) assemble into highly ordered nanostructures, which adopt a variety of morphologies depending on their environment. Here, we present a series of discrete oligodimethylsiloxane-oligoproline (oDMS-oPro) BCOs with varying oligomer lengths and proline end-groups, and study the nanostructures formed in both bulk and solution. The conjugation of oligoprolines to apolar siloxanes permits a study of the aggregation behavior of oligoproline moieties in a variety of solvents, including a highly apolar solvent like methylcyclohexane. The apolar solvent is more reminiscent of the polarity of the siloxane bulk, which gives insights into the supramolecular interactions that govern both bulk and solution assembly processes of the oligoproline. This extensive structural characterization allows the bridging of the gap between solution and bulk assembly. The interplay between the aggregation of the oligoproline block and the phase segregation induced by the siloxane drives the assembly. This gives rise to disordered, micellar microstructures in apolar solution and crystallization-driven lamellar nanostructures in the bulk. While most di- and triblock co-oligomers adopt predictable morphological features, one of them, oDMS15-oPro6-NH2, exhibits pathway complexity leading to gel formation. The pathway selection in the complex interplay between aggregation and phase segregation gives rise to interesting material properties.

Rapid access to discrete and monodisperse block co-oligomers from sugar and terpenoid toward ultrasmall periodic nanostructures

Discrete block co-oligomers (BCOs) are gaining considerable attention due to their potential to form highly ordered ultrasmall nanostructures suitable for lithographic templates. However, laborious synthetic routes present a major hurdle to the practical application. Herein, we report a readily available discrete BCO system that is capable of forming various self-assembled nanostructures with ultrasmall periodicity. Click coupling of propargyl-functionalized sugars (containing 1-7 glucose units) and azido-functionalized terpenoids (containing 3, 4, and 9 isoprene units) afforded the discrete and monodisperse BCOs with a desired total degree of polymerization and block ratio. These BCOs microphase separated into lamellar, gyroid, and cylindrical morphologies with the domain spacing (d) of 4.2-7.5 nm. Considering easy synthesis and rich phase behavior, presented BCO systems could be highly promising for application to diverse ~4-nm nanofabrications.

Rapid Synthesis of Silk-Like Polymers Facilitated by Microwave Irradiation and Click Chemistry

Silk is a natural fiber that surpasses most man-made polymers in its combination of strength and toughness. Silk fibroin, the primary protein component of silk, can be synthetically mimicked by a linear copolymer with alternating rigid and soft segments. Strategies for chemical synthesis of such silk-like polymers have persistently resulted in poor sequence control, long reaction times, and low molecular weights. Here, we present a two-stage approach for rapidly synthesizing silk-like polymers with precisely defined rigid blocks. This approach utilizes solid-phase peptide synthesis to create uniform oligoalanine "prepolymers", followed by microwave-assisted step-growth polymerization with bifunctional poly(ethylene glycol). Multiple coupling chemistries and reaction conditions were explored, with microwave-assisted click chemistry yielding polymers with M_w ∼ 14 kg/mol in less than 20 min. These polymers formed antiparallel β-sheets and nanofibers, which is consistent with the structure of natural silk fibroin. Thus, our strategy demonstrates a promising modular approach for synthesizing silk-like polymers.

Ordered structures and sub-5 nm line patterns from rod-coil hybrids containing oligo(dimethylsiloxane)

Sub-5 nm ordered nanostructures including lamellar, double gyroid, and columnar phases are formed by a series of oligo(dimethylsiloxane) (ODMS)-based rod-coil liquid crystals with accurate molecular weights. Films with well-oriented line patterns can be obtained by substrate-induced directed self-assembly, which may be further used as lithographic templates.

Discrete Block Copolymers with Diverse Architectures: Resolving Complex Spherical Phases with One Monomer Resolution

This work describes the first rigorous example of a single-component block copolymer system forming unconventional spherical phases. A library of discrete block polymers with uniform chain length and diverse architectures were modularly prepared through a combination of a step-growth approach and highly efficient coupling reactions. The precise chemical structure eliminates all the molecular defects associated with molar weight, dispersity, and compositional ratio. Complex spherical phases, including the Frank-Kasper phase (A15 and σ) and quasicrystalline phase, were experimentally captured by meticulously tuning the composition and architectures. A phase portrait with unprecedented accuracy was mapped out (up to one monomer resolution), unraveling intriguing details of phase behaviors that have long been compromised by inherent molecular weight distribution. This study serves as a delicate model system to bridge the existing gaps between experimental observations and theoretical assessments and to provide insights into the formation and evolution of the unconventional spherical phases in soft matter systems.

Architecture-Dependent Interplay between Self-Assembly and Crystallization in Discrete Block Co-Oligomers

Access to versatile and stable nanostructures formed by the self-assembly of block copolymers in water is essential for biomedical applications. These applications require control over the stability, morphology, and size of the formed nanostructures. Here, we study the self-assembly in water of a library of fully discrete and sequence-controlled AB-type block co-oligomers (BCOs) of oligo(l-lactic acid)-b-oligo(ethylene glycol). In this series, we eliminate all the inherent uncertainty associated with molar mass, ratio, and compositional dispersity, but vary the ratio between the water-soluble and water-insoluble parts. The BCO library is designed in such a way that vesicles, spherical micelles, and cylindrical micelles are generated in solution, hereby covering a variety of common morphologies. With the help of self-consistent field (SCF) computations, the thermodynamic structures in water are predicted for all structures. The morphologies formed were experimentally analyzed using a combination of calorimetry and scattering techniques. When comparing the experimentally found structures with those predicted, we find an excellent agreement. Intriguingly, calorimetry showed the presence of crystallized l-lactic acid (LLA) units in the bilayer of the lamellar forming BCO. Despite this crystallinity, there is no mismatch between the predicted and observed bilayer thicknesses upon self-assembly in water. In this case, phase separation driven by the hydrophobic LLA block coincides with crystallization, resulting in stable morphologies. Thus, SCF guided library design and sample preparation can lead toward robust formulations of nanoparticles.

Effects of crystallinity and dispersity on the self-assembly behavior of block co-oligomers in water

Dispersity and crystallinity affect the dimensions of lamellar structures formed by amphiphilic block co-oligomers in water as well as the reproducibility of sample formation; spherical and cylindrical morphologies are less affected.

Sequence isomerism in uniform polyphosphoesters programmes self-assembly and folding

Perfectly sequence-defined macromolecules have been synthesised through the phosphoramidite method. Sequence isomerism determines self-assembly giving a raft of unusual nanostructures.

Precise modulation of molecular weight distribution for structural engineering

As one of the most critical molecular parameters, molecular weight distribution has a profound impact on the structure and properties of polymers. Quantitative and comprehensive understanding, however, has yet to be established, mainly due to the challenge in the precise control and regulation of molecular weight distribution. In this work, we demonstrated a robust and effective approach to artificially engineer the molecular weight distribution through precise recombination of discrete macromolecules. The width, symmetry, and other characteristics of the distribution can be independently manipulated to achieve absolute control, serving as a model platform for highlighting the importance of chain length heterogeneity in structural engineering. Different from their discrete counterparts, each individual component in dispersed samples experiences a varied degree of supercooling at a specific crystallization temperature. Non-uniform crystal nucleation and growth kinetics lead to distinct molecular arrangements. This work could bridge the gap between discrete and dispersed macromolecules, providing fundamental perspectives on the critical role of molecular weight distribution.

Chemical Synthesis of Silk-Mimetic Polymers

Silk is a naturally occurring high-performance material that can surpass man-made polymers in toughness and strength. The remarkable mechanical properties of silk result from the primary sequence of silk fibroin, which bears semblance to a linear segmented copolymer with alternating rigid ("crystalline") and flexible ("amorphous") blocks. Silk-mimetic polymers are therefore of great emerging interest, as they can potentially exhibit the advantageous features of natural silk while possessing synthetic flexibility as well as non-natural compositions. This review describes the relationships between primary sequence and material properties in natural silk fibroin and furthermore discusses chemical approaches towards the synthesis of silk-mimetic polymers. In particular, step-growth polymerization, controlled radical polymerization, and copolymerization with naturally derived silk fibroin are presented as strategies for synthesizing silk-mimetic polymers with varying molecular weights and degrees of sequence control. Strategies for improving macromolecular solubility during polymerization are also highlighted. Lastly, the relationships between synthetic approach, supramolecular structure, and bulk material properties are explored in this review, with the aim of providing an informative perspective on the challenges facing chemical synthesis of silk-mimetic polymers with desirable properties.

Polymorphism in the Assembly of Phase-Segregated Block Molecules: Pathway Control to 1D and 2D Nanostructures

Nanomaterials with highly ordered, one- or two-dimensional molecular morphologies have promising properties for adaptive materials. Here, we present the synthesis and structural characterization of dinitrohydrazone (hydz) functionalized oligodimethylsiloxanes (oDMSs) of discrete length, which form both 1- and 2D nanostructures by precisely controlling composition and temperature. The morphologies are highly ordered due to the discrete nature of the siloxane oligomers. Columnar, 1D structures are formed from the melt within a few seconds as a result of phase segregation in combination with π-π stacking of the hydrazones. By tuning the length of the siloxane, the synergy between these interactions is observed which results in a highly temperature sensitive material. Macroscopically, this gives a material that switches reversibly and fast between an ordered, solid and a disordered, liquid state at almost equal temperatures. Ordered, 2D lamellar structures are formed under thermodynamic control by cold crystallization of the hydrazones in the amorphous siloxane bulk via a slow process. We elucidate the 1- and 2D morphologies from the nanometer to molecular level by the combined use of solid state NMR and X-ray scattering. The exact packing of the hydrazone rods within the cylinders and lamellae surrounded the liquid-like siloxane matrix is clarified. These results demonstrate that controlling the assembly pathway in the bulk and with that, tuning the nanostructure dimensions and domain spacings, material properties are altered for applications in nanotechnology or thermoresponsive materials.

Stereocomplexes of Discrete, Isotactic Lactic Acid Oligomers Conjugated with Oligodimethylsiloxanes

Discrete length block co-oligomers (BCOs) comprised of a crystalline and an amorphous block are a new class of materials that gives highly ordered lamellar morphologies at small length scales. Here, we show the preparation of discrete, isotactic oligo l- and d-lactic acid (olLA and odLA) homoblocks followed by ligation to oligodimethylsiloxane (oDMS), affording a library of crystalline-amorphous BCOs that vary in molecular weight and composition. Mixing the two enantiomeric BCOs or homoblocks results in the formation of the corresponding stereocomplex. The properties and phase behavior of the isotactic (block co)oligomers and the stereocomplexes thereof are studied using differential scanning calorimetry and small-angle X-ray scattering. A systematic study of the isotactic homoblock lengths and crystal structure confirmed the formation of a 103 helix with a monomeric rise of 0.3 nm, whereas the stereocomplex adopts a 31 helix. The same type of crystal structure was found for the isotactic and stereocomplex of BCOs giving rise to the formation of lamellar morphologies at room temperature as a result of crystallization of the oLA blocks. Distorted lamellar structures were found in BCOs that preorganize into nonlamellar morphologies prior to crystallization. The stereocomplex BCOs shows more crystal defects and a loss of long-range ordering in the microstructure due to the larger driving force for crystallization. Hence, the balance between chain length, block volume, and the crystallization strength are of major importance for the formation of the final structure with the least defects.

Microphase separation of highly amphiphilic, low N polymers by photoinduced copper-mediated polymerization, achieving sub-2 nm domains at half-pitch

Fluoro-polyacrylic acid block copolymers with vary narrow dispersity are shown to have sub-2 nm domain sizes on phase separation.

Molecular Weight Distribution Shape as a Versatile Approach to Tailoring Block Copolymer Phase Behavior

The molecular weight distributions (MWDs) of block copolymers significantly impact their morphological phase behavior, but exploiting these features as a means to tune material properties has been limited to the MWD breadth, or dispersity (Đ). Manipulation of the entire MWD has promising potential to address this challenge by providing a convenient and versatile route toward tailoring polymer nanostructure. Herein, we describe the self-assembly of poly(styrene)-block-poly(2-vinylpyridine) (PS-b-P2VP) where the PS blocks have systematically deviating compositions of molecular weights. We find that controlling the MWD shape, breadth and skew, afforded access to different morphologies in samples with the same molecular characteristics, including Đ. As such, we illustrate the generality and effectiveness of this strategy and anticipate that it will facilitate the increased deployment of disperse polymer compositions in advanced materials applications.

Consequences of Dispersity on the Self-Assembly of ABA-Type Amphiphilic Block Co-Oligomers

Intriguingly, little is known about the impact of dispersity on the crystallization driven self-assembly (CDSA) of amphiphilic block copolymers in aqueous media. Here, we investigate the influence of dispersity on the CDSA of ABA-type amphiphilic block co-oligomers (ABCOs). Two pairs of ABCOs are synthesized comprising discrete (Đ = 1.00) or disperse (Đ = 1.20) isotactic l-lactic acid 16-mers as the semicrystalline hydrophobic block and either oligo(ethylene glycol) methyl ether (MeOoEG) or oligo(tetraethylene glycol succinate) (oTEGSuc) as the discrete hydrophilic block. Self-assembly studies in water with 10% THF reveal uniform nanofibers/2D sheets for the discrete oligomers, but such structural regularity is largely compromised in the disperse oligomers. The results are corroborated by sharp melting transitions in both solution and bulk for the discrete ABCOs, unlike their disperse analogues that show a lack of crystallization. Interestingly, the discrete MeOoEG-LLA oligomer reveals crystallization driven gelation, illustrating the contrasting differences between the discrete oligomers and their disperse counterparts.

Stereochemical Sequence Dictates Unimolecular Diblock Copolymer Assembly

Deciphering the significance of length, sequence, and stereochemistry in block copolymer self-assembly remains an ongoing challenge. A dearth of methods to access uniform block co-oligomers/polymers with precise stereochemical sequences has precluded such studies. Here, we develop iterative exponential growth methods for the synthesis of a small library of unimolecular stereoisomeric diblock 32-mers. X-ray scattering reveals that stereochemistry modulates the phase behavior of these polymers, which we rationalize based on simulations carried out on a theoretical model system. This work demonstrates that stereochemical sequence can play a crucial role in unimolecular polymer self-assembly.

Controlled Formation and Binding Selectivity of Discrete Oligo(methyl methacrylate) Stereocomplexes

The triple-helix stereocomplex of poly(methyl methacrylate) (PMMA) is a unique example of a multistranded synthetic helix that has significant utility and promise in materials science and nanotechnology. To gain a fundamental understanding of the underlying assembly process, discrete stereoregular oligomer libraries were prepared by combining stereospecific polymerization techniques with automated flash chromatography purification. Stereocomplex assembly of these discrete building blocks enabled the identification of (1) the minimum degree of polymerization required for the stereocomplex formation and (2) the dependence of the helix crystallization mode on the length of assembling precursors. More significantly, our experiments resolved binding selectivity between helical strands with similar molecular weights. This presents new opportunities for the development of next-generation polymeric materials based on a triple-helix motif.

Discrete oligodimethylsiloxane–oligomethylene di- and triblock co-oligomers: synthesis, self-assembly and molecular organisation

A new class of discrete-length block co-oligomers comprising oligodimethylsiloxane (oDMS) and oligomethylene (oM) is presented.

Amplifying (Im)perfection: The Impact of Crystallinity in Discrete and Disperse Block Co-oligomers

Crystallinity is seldomly utilized as part of the microphase segregation process in ultralow-molecular-weight block copolymers. Here, we show the preparation of two types of discrete, semicrystalline block co-oligomers, comprising an amorphous oligodimethylsiloxane block and a crystalline oligo-l-lactic acid or oligomethylene block. The self-assembly of these discrete materials results in lamellar structures with unforeseen uniformity in the domain spacing. A systematic introduction of dispersity reveals the extreme sensitivity of the microphase segregation process toward chain length dispersity in the crystalline block.

Effects of Tailored Dispersity on the Self-Assembly of Dimethylsiloxane-Methyl Methacrylate Block Co-Oligomers

The effect of dispersity on block polymer self-assembly was studied in the monodisperse limit using a combination of synthetic chemistry, matrix-assisted laser desorption ionization spectroscopy, and small-angle X-ray scattering. Oligo(methyl methacrylate) (oligoMMA) and oligo(dimethylsiloxane) (oligoDMS) homopolymers were synthesized by conventional polymerization techniques and purified to generate an array of discrete, semidiscrete, and disperse building blocks. Coupling reactions afforded oligo(DMS-MMA) block polymers with precisely tailored molar mass distributions spanning single molecular systems (Đ = 1.0) to low-dispersity mixtures (Đ ≈ 1.05). Discrete materials exhibit a pronounced decrease in domain spacing and sharper scattering reflections relative to disperse analogues. The order-disorder transition temperature (T_ODT) also decreases with increasing dispersity, suggesting stabilization of the disordered phase, presumably due to the strengthening of composition fluctuations at the low molar masses investigated.