Theoretical Design and Structural Modulation of a Surface-Functionalized Ti3C2Tx MXene-Based Heterojunction Electrocatalyst for a Li-Oxygen Battery

Boosting the ORR/OER Activity of Cobalt-Based Nano-Catalysts by Co 3d Orbital Regulation

The transition metal oxides/sulfides are considered promising catalysts due to their abundant resources, facile synthesis, and reasonable electrocatalytic activity. Herein, a significantly improved intrinsic catalytic activity is achieved for constructing a Co-based nanocrystal (Co-S@NC) with the coordination of Co─S, Co─S─C, and Co─Nx─C. The calculational and experimental results demonstrate that the diversified chemical environment of Co-cations induces the transition of 3d orbitals to a high spin-state that exhibits the coexistence of Co2+ with fully occupied dπ orbitals and Co3+ with unpaired electrons in dπ orbitals. The diverse dπ orbitals occupation contributes to an elevated d-band center of Co ions, which accelerates oxygen reduction reaction and oxygen evolution reaction electrocatalytic kinetics of the Co-S@NC nanocrystal. Therefore, the Li-O2 batteries with Co-S@NC as cathode catalyst exhibit 300 cycles at the current density of 500 mA g-1 with a cut-off capacity of 1000 mAh g-1. Moreover, the ultrahigh discharge specific capacity of 34 587 mAh g-1 is obtained at a current density of 1000 mA g-1, corresponding to the energy density 949 Wh kg-1 of a prototype Li-O2 battery. The study on 3d orbital regulation of nanocrystals provides an innovative strategy for bifunctional electrocatalysts toward the practical application of metal-air batteries.

Nitrogen-Doped TiO2- x(B)/MXene Heterostructures for Expediting Sulfur Redox Kinetics and Suppressing Lithium Dendrites

Practical application of lithium-sulfur (Li-S) batteries is severely impeded by the random shuttling of soluble lithium polysulfides (LiPSs), sluggish sulfur redox kinetics, and uncontrollable growth of lithium dendrites, particularly under high sulfur loading and lean electrolyte conditions. Here, nitrogen-doped bronze-phase TiO2(B) nanosheets with oxygen vacancies (OVs) grown in situ on MXenes layers (N-TiO2- x(B)-MXenes) as multifunctional interlayers are designed. The N-TiO2- x(B)-MXenes show reduced bandgap of 1.10 eV and high LiPSs adsorption-conversion-nucleation-decomposition efficiency, leading to remarkably enhanced sulfur redox kinetics. Moreover, they also have lithiophilic nature that can effectively suppress dendrites growth. The cell based on the N-TiO2- x(B)-MXenes interlayer under sulfur loading of 2.5 mg cm-2 delivers superior cycling performance with a high specific capacity of 690.7 mAh g-1 over 600 cycles at 1.0 C. It still has a notable areal capacity of 6.15 mAh cm-2 after 50 cycles even under a high sulfur loading of 7.2 mg cm-2 and a low electrolyte-to-sulfur (E/S) ratio of 6.4 µL mg-1. The Li-symmetrical battery with the N-TiO2- x(B)-MXenes interlayer showcases a low over-potential fluctuation with 21.0 mV throughout continuous lithium plating/stripping for 1000 h. This work offers valuable insights into the manipulation of defects and heterostructures to achieve high-energy Li-S batteries.

Theoretical Study of Catalytic Performance of Pristine M2C and Oxygen-Functionalized M2CO2 MXenes as Cathodes for Li-N2 Batteries

Li-N2 batteries are a promising platform for electrochemical energy storage, but their performance is limited by the low activity of the cathode catalysts. In this work, density functional theory was used to study the catalytic activity of the pristine M2C and oxygen-functionalized M2CO2 MXenes (M = Sc, Ti, and V) as cathodes for Li-N2 batteries. The calculated results suggest that the pristine M2C MXenes (M = Sc, Ti, and V) show high electrical conductivity due to the Fermi level crossing the metal 3d states. The stable adsorption of N2 occurs on M2C MXenes via a side-on model and strengthens gradually with decreasing metal atomic number. Furthermore, the kinetics of N2 dissociation can be significantly accelerated by the coadsorption of Li on M2C MXenes. However, adsorption and dissociation of N2 on the M2CO2 surfaces are too difficult to occur due to strong electrostatic repulsion. The Li-mediated nitrogen reduction reaction during discharge proceeds favorably via (N + N)* → (LiN + N)* → (LiN + LiN)* → (Li2N + LiN)* → (Li2N + Li2N)* → (Li3N + Li2N)* → (Li3N + Li3N)* to form two isolated Li3N* on M2C MXenes. The calculated charge-discharge overpotentials decrease in the order of Sc2C < Ti2C < V2C. Notably, the Sc2C MXene has great potential as a cathode catalyst for Li-N2 batteries because of its high electrical conductivity, strong N2 adsorption, favorable Li-mediated N2 dissociation, and ultralow discharging, charging, and total overpotentials (0.07, 0.06, and 0.13 V). This study offers a theoretical foundation for future research on Li-N2 batteries.

Defect Engineering of Hexagonal MAB Phase Ti2InB2 as Anode of Lithium-Ion Battery with Excellent Cycling Stability

Hexagonal MAB phases （h-MAB） have attracted attention due to their potential to exfoliate into MBenes, similar to MXenes, which are predicted to be promising for Li-ion battery applications. However, the high cost of synthesizing MBenes poses challenges for their use in batteries. This study presents a novel approach where a simple ball-milling treatment is employed to enhance the purity of the h-MAB phase Ti2InB2 and introduce significant indium defects, resulting in improved conductivity and the creation of abundant active sites. The synthesized Ti2InB2 with indium defects (VIn-Ti2InB2) exhibits excellent electrochemical properties, particularly exceptional long-cycle stability at current densities of 5 A g-1 (5000 cycles, average capacity decay of 0.0018%) and 10 A g-1 (15 000 cycles, average capacity decay of 0.093%). The charge storage mechanism of VIn-Ti2InB2, involving a dual redox reaction, is proposed, where defects promote the In-Li alloy reaction and a redox reaction with Li in the TiB layer. Finally, a Li-ion full cell demonstrates cycling stability at 0.5 A g-1 after 350 cycles. This work presents the first accessible and scalable application of VIn-Ti2InB2 as a Li-ion anode, unlocking a wealth of possibilities for sustainable electrochemical applications of h-MAB phases.

Enhanced oxygen reduction activity ofα-MnO2by NH3plasma treatment

Oxygen vacancies and heteroatom doping play important role in oxygen reduction activity of metal oxides. Developing efficient modification method is one of the key issues in catalysts research. Room temperature plasma treatment, with the advantages of mild working conditions, no emissions and high efficiency, is a new catalyst modification method developed in recent years. In this work, hydrothermal synthesizedα-MnO2nanorods are treated in NH3plasma at room temperature. In the reducing atmosphere, oxygen vacancies and N doping are achieved simultaneously on the surface. The NH3plasma etched MnO2demonstrate a significant enhanced oxygen reduction activity with half-wave potential of 0.84 V, limiting current density of 6.32 mA cm-2and transferred electrons number of 3.9. The Mg-air battery with N-MnO2display a maximum power density of 76.3 mW cm-2as well as stable discharge performance. This work provides new ideas for preparing efficient and cost-effective method to boost the catalysts activity.

Self-Catalyzed Growth of Co4N and N-Doped Carbon Nanotubes toward Bifunctional Cathode for Highly Safe and Flexible Li-Air Batteries

The practical application of high-energy density lithium-oxygen (Li-O2) batteries is severely impeded by the notorious cycling stability and safety, which mainly comes from slow kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) at cathodes, causing inferior redox overpotentials and reactive lithium metal in flammable liquid electrolyte. Herein, a bifunctional electrode, a safe gel polymer electrolyte (GPE), and a robust lithium anode are proposed to alleviate above problems. The bifunctional electrode is composed of N-doped carbon nanotubes (N-CNTs) and Co4N by in situ chemical vapor deposition self-catalyzed growth on carbon cloth (N-CNTs@Co4N@CC). The self-supporting, binder-free N-CNTs@Co4N@CC electrode has a strong and stable three-dimensional (3D) interconnected conductive structure, which provides interconnectivity between the active sites and the electrode to promote the transfer of electrons. Furthermore, the N-CNT-intertwined Co4N ensures efficient catalytic activity. Hence, the electrode demonstrates improved electrochemical properties even under a large current density (2000 mA g-1) and long cycling operation (250 cycles). Moreover, a highly safe and flexible rechargeable cell using the 3D N-CNTs@Co4N@CC electrode, GPE, and robust lithium anode design has been explored. The open circuit voltage is stable at ∼3.0 V even after 9800 cycles, which proves the mechanical durability of the integrated GPE cell. The stable cable-type Li-air battery was demonstrated to stably drive the light-emitting diodes (LEDs), highlighting the reliability for practical use.

A macroporous carbon nanoframe for hosting Mott-Schottky Fe-Co/Mo2C sites as an outstanding bi-functional oxygen electrocatalyst

Simultaneously optimizing the d-band center of the catalyst and the mass/charge transport processes during the oxygen catalytic reaction is an essential but arduous task in the pursuit of creating effective and long-lasting bifunctional oxygen catalysts. In this study, a Fe-Co/Mo2C@N-doped carbon macroporous nanoframe was successfully synthesized via a facile "conformal coating and coordination capture" pyrolysis strategy. As expected, the resulting heterogeneous electrocatalyst exhibited excellent reversible oxygen electrocatalytic performance in an alkaline medium, as demonstrated by the small potential gap of 0.635 V between the operating potential of 1.507 V at 10 mA cm-2 for the oxygen evolution reaction and the half-wave potential of 0.872 V towards the oxygen reduction reaction. Additionally, the developed Zn-air battery employing the macroporous nanoframe heterostructure displayed an impressive peak power density of 218 mW cm-2, a noteworthy specific capacity of 694 mA h gZn-1, and remarkable charging/discharging cycle durability. Theoretical calculations confirmed that the built-in electric field between the Fe-Co alloy and Mo2C semiconductor could induce advantageous charge transport and redistribution at the heterointerface, contributing to the optimization of the d-band center of the nanohybrid and ultimately leading to a reduction in the reaction energy barrier during catalytic processes. The exquisite macroporous nanoframe facilitated the rapid transport of ions and charges, as well as the smooth access of oxygen to the internal active site. Thus, the presented unique electronic structure regulation and macroporous structure design show promising potential for the development of robust bifunctional oxygen electrodes.

Water-Trapping Single-Atom Co-N4 /Graphene Triggering Direct 4e- LiOH Chemistry for Rechargeable Aprotic Li-O2 Batteries

Lithium-oxygen (Li-O2 ) batteries have received extensive attention owing to ultrahigh theoretical energy density. Compared to typical discharge product Li2 O2 , LiOH has attracted much attention for its better chemical and electrochemical stability. Large-scale applications of Li-O2 batteries with LiOH chemistry are hampered by the serious internal shuttling of the water additives with the desired 4e- electrochemical reactions. Here, a metal organic framework-derived "water-trapping" single-atom-Co-N4 /graphene catalyst (Co-SA-rGO) is provided that successfully mitigates the water shuttling and enables the direct 4e- catalytic reaction of LiOH in the aprotic Li-O2 battery. The Co-N4 center is more active toward proton-coupled electron transfer, benefiting - direction 4e- formation of LiOH. 3D interlinked networks also provide large surface area and mesoporous structures to trap ≈12 wt% H2 O molecules and offer rapid tunnels for O2 diffusion and Li+ transportation. With these unique features, the Co-SA-rGO based Li-O2 battery delivers a high discharge platform of 2.83 V and a large discharge capacity of 12 760.8 mAh g-1 . Also, the battery can withstand corrosion in the air and maintain a stable discharge platform for 220 cycles. This work points out the direction of enhanced electron/proton transfer for the single-atom catalyst design in Li-O2 batteries.

Novel Strain Engineering Combined with a Microscopic Pore Synergistic Modulated Strategy for Designing Lattice Tensile-Strained Porous V2C-MXene for High-Performance Overall Water Splitting

Transition metal carbon/nitride (MXene) holds immense potential as an innovative electrocatalyst for enhancing the overall water splitting properties. Nevertheless, the re-stacking nature induced by van der Waals force remains a significant challenge. In this work, the lattice tensile-strained porous V₂C-MXene (named as TS₍₂₄₎-P₍₅₀₎-V₂C) is successfully constructed via the rapid spray freezing method and the following hydrothermal treatment. Besides, the influence of lattice strain degree and microscopic pores on the catalytic ability is reviewed and explored systematically. The lattice tensile strain within V₂C-MXene could widen the interlayer spacing and accelerate the ion transfer. The microscopic pores could change the ion transmission path and shorten the migration distance. As a consequence, the obtained TS₍₂₄₎-P₍₅₀₎-V₂C shows extraordinary hydrogen evolution reaction and oxygen evolution reaction activity with the overpotential of 154 and 269 mV, respectively, at the current density of 10 mA/cm², which is quite remarkable compared to the MXene-based electrocatalysts. Moreover, the overall water splitting device assembled using TS₍₂₄₎-P₍₅₀₎-V₂C as both anode and cathode demonstrates a low cell voltage requirement of 1.57 V to obtain 10 mA/cm². Overall, the implementation of this work could offer an exciting avenue to overcome the re-stacking issue of V₂C-MXene, affording a high-efficiency electrocatalyst with superior catalytic activity and desirable reaction kinetics.

NiFe-LDH/MXene nano-array hybrid architecture for exceptional capacitive lithium storage

Layered double hydroxides (LDHs) have great advantages in the domain of energy storage because of their exchangeable anions and large specific surface area. Nevertheless, the shortcomings of their poor electrical conductivity, easy stacking of nanosheets, and large volume variation in the cycling processes lead to unsatisfactory cycling stability and rate performance, which severely limits their further application. Therefore, we generated homogeneous nanoarrays of NiFe-LDH on the surface of Ti₃C₂T_x-MXene by a refluxing process. The resulting NiFe-LDH/MXene-500 hybrid material was applied as an anode of a lithium-ion battery (LIB) and exhibited a discharge capacity of 894.8 mA h g^-1 at 200 mA g^-1 (over 300 cycles) and could maintain a reversible capacity of 547.1 mA h g^-1 even at 1 A g^-1. With the addition of MXene, the volume increases of the NiFe-LDH/MXene hybrid materials were also significantly alleviated. The thickness of the NiFe-LDH/MXene-500 electrode only increased by 31% after 50 cycles, which was far better than the prepared NiFe-LDH electrode. On the hand, the synergistic interaction of NiFe-LDH and MXene could stabilize the structure, reduce the activation barrier of ion/electron diffusion, and promote electron transfer in the electrode. MXene with high conductivity can be used as electrical and ionic conductance media to promote the transformation reaction of NiFe-LDH. According to the detailed kinetic analysis, the capacitance control behavior is the main electrochemical reaction of NiFe-LDH/MXene electrodes.

Hierarchical MXene/transition metal oxide heterostructures for rechargeable batteries, capacitors, and capacitive deionization

2D MXenes have attracted considerable attention due to their high electronic conductivity, tunable metal compositions, functional termination groups, low ion diffusion barriers, and abundant active sites. However, MXenes suffer from sheet stacking and partial surface oxidation, limiting their energy storage and water treatment development. To solve these problems and enhance the performance of MXenes in practical applications, various hierarchical MXene/transition metal oxide (MXene/TMO) heterostructures are rationally designed and constructed. The hierarchical MXene/TMO heterostructures can not only prevent the stacking of MXene sheets and improve the electronic conductivity and buffer the volume change of TMOs during the electrochemical reaction process. The synergistic effect of conductive MXenes and active TMOs also makes MXene/TMO heterostructures promising electrode materials for energy storage and seawater desalination. This review mainly introduces and discusses the recent research progress in MXene/TMO heterostructures, focusing on their synthetic strategies, heterointerface engineering, and applications in rechargeable batteries, capacitors, and capacitive deionization (CDI). Finally, the key challenges and prospects for the future development of the MXene/TMO heterostructures in rechargeable batteries, capacitors, and CDI are proposed.

Anchoring NiO Nanosheet on the Surface of CNT to Enhance the Performance of a Li-O2 Battery

Li₂O₂, as the cathodic discharge product of aprotic Li-O₂ batteries, is difficult to electrochemically decompose. Transition-metal oxides (TMOs) have been proven to play a critical role in promoting the formation and decomposition of Li₂O₂. Herein, a NiO/CNT catalyst was prepared by anchoring a NiO nanosheet on the surface of CNT. When using the NiO/CNT as a cathode catalyst, the Li-O₂ battery had a lower overpotential of 1.2 V and could operate 81 cycles with a limited specific capacity of 1000 mA h g⁻¹ at a current density of 100 mA g⁻¹. In comparison, with CNT as a cathodic catalyst, the battery could achieve an overpotential of 1.64 V and a cycling stability of 66 cycles. The introduction of NiO effectively accelerated the generation and decomposition rate of Li₂O₂, further improving the battery performance. SEM and XRD characterizations confirmed that a Li₂O₂ film formed during the discharge process and could be fully electrochemical decomposed in the charge process. The internal network and nanoporous structure of the NiO/CNT catalyst could provide more oxygen diffusion channels and accelerate the decomposition rate of Li₂O₂. These merits led to the Li-O₂ battery’s better performance.