3,4-Dihydroxyphenylalanine Peptides as Nonperturbative Quantum Dot Sensors of Aminopeptidase

Multiparametric modulation of magnetic transduction for biomolecular sensing in liquids

The recent COVID19 pandemic has remarkably boosted the research on in vitro diagnosis assays to detect biomarkers in biological fluids. Specificity and sensitivity are mandatory for diagnostic kits aiming to reach clinical stages. Whilst the modulation of sensitivity can significantly improve the detection of biomarkers in liquids, this has been scarcely explored. Here, we report on the proof of concept and parametrization of a novel biosensing methodology based on the changes of AC magnetic hysteresis areas observed for magnetic nanoparticles following biomolecular recognition in liquids. Several parameters are shown to significantly modulate the transducing capacity of magnetic nanoparticles to detect analytes dispersed in saline buffer at concentrations of clinical relevance. Magnetic nanoparticles were bio-conjugated with an engineered recognition peptide as a receptor. Analytes are engineered tetratricopeptide binding domains fused to the fluorescent protein whose dimerization state allows mono- or divalent variants. Our results unveil that the number of receptors per particle, analyte valency and concentration, nanoparticle composition and concentration, and field conditions play a key role in the formation of assemblies driven by biomolecular recognition. Consequently, all these parameters modulate the nanoparticle transduction capacity. Our study provides essential insights into the potential of AC magnetometry for customizing biomarker detection in liquids.

Flexible Stacked Perovskite Photodetectors for High-Efficiency Multicolor Fluorescence Detection

A flexible, multicolor detector based on stacked perovskite layers with graded band gaps was presented. Different perovskite layers generate a series of photocurrents corresponding to light intensities at different wavelengths. Experimentally, the flexible detector demonstrated acceptable long-term stability and temperature stability in the bending state. To demonstrate the advantages of the flexible multicolor detector in biological applications, a tubular-shaped multicolor fluorescence detector that embraces the sample cell was constructed. As a result, the detection limits of three kinds of CdTe quantum dots (QDs) with central wavelengths of 545, 625, and 730 nm were 0.52, 0.85, and 0.43 nM, respectively, which was significantly improved by more than 10 times compared to those of planar detectors. Additionally, the detector was able to detect three kinds of QDs simultaneously in a mixed solution, and the relative deviation was smaller than 10% compared to the preset concentration. These results demonstrate that the flexible stacked perovskite detector and the tubular-shaped detection configuration hold promise for the simultaneous fluorescent detection of multiple biomolecules.

One-step homogeneous micro-orifice resistance immunoassay for detection of chlorpyrifos in orange samples

In this work, a one-step homogeneous micro-orifice resistance immunoassay has been proposed for chlorpyrifos detection by integrating functionalized polystyrene (PS) microsphere probes with particle counting technology. The particle counter is highly sensitive and accurate for detecting the state of PS microspheres, where the particles of different states exhibit significant differences in resistance. The state of the functionalized PS microspheres is altered from dispersed to aggregated during the antigen-antibody recognition. Based on the degree of aggregation of the functionalized PS microsphere probes, chlorpyrifos can be quantitatively detected through the competitive immune response between PS antibodies and PS complete antigens. This one-step homogeneous micro-orifice resistance immunoassay simplified the procedures and greatly increased the sensitivity of detection, which has been successfully applied to detect chlorpyrifos in orange samples within 0.5 h, with the detection limit of 0.058 ng/mL.

Polyhistidine-Tag-Enabled Conjugation of Quantum Dots and Enzymes to DNA Nanostructures

DNA nanostructures self-assemble into almost any arbitrary architecture, and when combined with their capability to precisely position and orient dyes, nanoparticles, and biological moieties, the technology reaches its potential. We present a simple yet multifaceted conjugation strategy based on metal coordination by a multi-histidine peptide tag (Histag). The versatility of the Histag as a means to conjugate to DNA nanostructures is shown by using Histags to capture semiconductor quantum dots (QDs) with numerical and positional precision onto a DNA origami breadboard. Additionally, Histag-expressing enzymes, such as the bioluminescent luciferase, can also be captured to the DNA origami breadboard with similar precision. DNA nanostructure conjugation of the QDs or luciferase is confirmed through imaging and/or energy transfer to organic dyes integrated into the DNA nanostructure.

Clinical Evaluation of Pathognomonic Salivary Protease Fingerprinting for Oral Disease Diagnosis

Dental decay (Caries) and periodontal disease are globally prevalent diseases with significant clinical need for improved diagnosis. As mediators of dental disease-specific extracellular matrix degradation, proteases are promising analytes. We hypothesized that dysregulation of active proteases can be functionally linked to oral disease status and may be used for diagnosis. To address this, we examined a total of 52 patients with varying oral disease states, including healthy controls. Whole mouth saliva samples and caries biopsies were collected and subjected to analysis. Overall proteolytic and substrate specific activities were assessed using five multiplexed, fluorogenic peptides. Peptide cleavage was further described by inhibitors targeting matrix metalloproteases (MMPs) and cysteine, serine, calpain proteases (CSC). Proteolytic fingerprints, supported by supervised machine-learning analysis, were delineated by total proteolytic activity (PepE) and substrate preference combined with inhibition profiles. Caries and peridontitis showed increased enzymatic activities of MMPs with common (PepA) and divergent substrate cleavage patterns (PepE), suggesting different MMP contribution in particular disease states. Overall, sensitivity and specificity values of 84.6% and 90.0%, respectively, were attained. Thus, a combined analysis of protease derived individual and arrayed substrate cleavage rates in conjunction with inhibitor profiles may represent a sensitive and specific tool for oral disease detection.

Photoluminescent Nanoparticles for Chemical and Biological Analysis and Imaging

Research related to the development and application of luminescent nanoparticles (LNPs) for chemical and biological analysis and imaging is flourishing. Novel materials and new applications continue to be reported after two decades of research. This review provides a comprehensive and heuristic overview of this field. It is targeted to both newcomers and experts who are interested in a critical assessment of LNP materials, their properties, strengths and weaknesses, and prospective applications. Numerous LNP materials are cataloged by fundamental descriptions of their chemical identities and physical morphology, quantitative photoluminescence (PL) properties, PL mechanisms, and surface chemistry. These materials include various semiconductor quantum dots, carbon nanotubes, graphene derivatives, carbon dots, nanodiamonds, luminescent metal nanoclusters, lanthanide-doped upconversion nanoparticles and downshifting nanoparticles, triplet-triplet annihilation nanoparticles, persistent-luminescence nanoparticles, conjugated polymer nanoparticles and semiconducting polymer dots, multi-nanoparticle assemblies, and doped and labeled nanoparticles, including but not limited to those based on polymers and silica. As an exercise in the critical assessment of LNP properties, these materials are ranked by several application-related functional criteria. Additional sections highlight recent examples of advances in chemical and biological analysis, point-of-care diagnostics, and cellular, tissue, and in vivo imaging and theranostics. These examples are drawn from the recent literature and organized by both LNP material and the particular properties that are leveraged to an advantage. Finally, a perspective on what comes next for the field is offered.

Direct and Efficient Conjugation of Quantum Dots to DNA Nanostructures with Peptide-PNA

DNA nanotechnology has proven to be a powerful strategy for the bottom-up preparation of colloidal nanoparticle (NP) superstructures, enabling the coordination of multiple NPs with orientation and separation approaching nanometer precision. To do this, NPs are often conjugated with chemically modified, single-stranded (ss) DNA that can recognize complementary ssDNA on the DNA nanostructure. The limitation is that many NPs cannot be easily conjugated with ssDNA, and other conjugation strategies are expensive, inefficient, or reduce the specificity and/or precision with which NPs can be placed. As an alternative, the conjugation of nanoparticle-binding peptides and peptide nucleic acids (PNA) can produce peptide-PNA with distinct NP-binding and DNA-binding domains. Here, we demonstrate a simple application of this method to conjugate semiconductor quantum dots (QDs) directly to DNA nanostructures by means of a peptide-PNA with a six-histidine peptide motif that binds to the QD surface. With this method, we achieved greater than 90% capture efficiency for multiple QDs on a single DNA nanostructure while preserving both site specificity and precise spatial control of QD placement. Additionally, we investigated the effects of peptide-PNA charge on the efficacy of QD immobilization in suboptimal conditions. The results validate peptide-PNA as a viable alternative to ssDNA conjugation of NPs and warrant studies of other NP-binding peptides for peptide-PNA conjugation.

Competition between Photoinduced Electron Transfer and Resonance Energy Transfer in an Example of Substituted Cytochrome c-Quantum Dot Systems

Colloidal quantum dots (QDs) are nanoparticles that are able to photoreduce redox proteins by electron transfer (ET). QDs are also able to transfer energy by resonance energy transfer (RET). Here, we address the question of the competition between these two routes of QDs’ excitation quenching, using cadmium telluride QDs and cytochrome c (CytC) or its metal-substituted derivatives. We used both oxidized and reduced versions of native CytC, as well as fluorescent, nonreducible Zn(II)CytC, Sn(II)CytC, and metal-free porphyrin CytC. We found that all of the CytC versions quench QD fluorescence, although the interaction may be described differently in terms of static and dynamic quenching. QDs may be quenchers of fluorescent CytC derivatives, with significant differences in effectiveness depending on QD size. SnCytC and porphyrin CytC increased the rate of Fe(III)CytC photoreduction, and Fe(II)CytC slightly decreased the rate and ZnCytC presence significantly decreased the rate and final level of reduced FeCytC. These might be partially explained by the tendency to form a stable complex between protein and QDs, which promoted RET and collisional quenching. Our findings show that there is a net preference for photoinduced ET over other ways of energy transfer, at least partially, due to a lack of donors, regenerating a hole at QDs and leading to irreversibility of ET events. There may also be a common part of pathways leading to photoinduced ET and RET. The nature of synergistic action observed in some cases allows the hypothesis that RET may be an additional way to power up the ET.

Pursuing the Promise of Enzymatic Enhancement with Nanoparticle Assemblies

The growing emphasis on green chemistry, renewable resources, synthetic biology, regio-/stereospecific chemical transformations, and nanotechnology for providing new biological products and therapeutics is reinvigorating research into enzymatic catalysis. Although the promise is profound, many complex issues remain to be addressed before this effort will have a significant impact. Prime among these is to combat the degradation of enzymes frequently seen in ex vivo formats following immobilization to stabilize the enzymes for long-term application and to find ways of enhancing their activity. One promising avenue for progress on these issues is via nanoparticle (NP) display, which has been found in a number of cases to enhance enzyme activity while also improving long-term stability. In this feature article, we discuss the phenomenon of enhanced enzymatic activity at NP interfaces with an emphasis on our own work in this area. Important factors such as NP surface chemistry, bioconjugation approaches, and assay formats are first discussed because they can critically affect the observed enhancement. Examples are given of improved performance for enzymes such as phosphotriesterase, alkaline phosphatase, trypsin, horseradish peroxidase, and β-galactosidase and in configurations with either the enzyme or the substrate attached to the NP. The putative mechanisms that give rise to the performance boost are discussed along with how detailed kinetic modeling can contribute to their understanding. Given the importance of biosensing, we also highlight how this configuration is already making a significant contribution to NP-based enzymatic sensors. Finally, a perspective is provided on how this field may develop and how NP-based enzymatic enhancement can be extended to coupled systems and multienzyme cascades.

Role of Tryptophan in Protein–Nanocrystals Interaction: Energy or Charge Transfer

The understanding of the interaction between the semiconductor nanocrystals (NCs) and the proteins are essential for design and fabrication of nanocomposites for application in the field of biotechnology. Herein, we have studied the interaction between CdTe NCs and the proteins by steady-state and time-resolved photoluminescence (PL) spectroscopy. The steady-state PL intensity of CdTe NCs is quenched and enhanced in the presence of lysozyme and bovine serum albumin, respectively. However, the PL intensity of CdTe NCs is not affected with α-synuclein, indicating the role of tryptophan moiety in the protein–NCs interaction. The detailed analysis of PL data allows us to elucidate the dominant mechanism of interaction, i.e. charge or energy transfer, depending on the location of tryptophan residues in the protein. Assuming a Poisson statistic of lysozymes around NCs, the Poisson binding model is used to understand the kinetics of charge transfer from CdTe NCs to the lysozyme. It provides the average number of lysozymes present on the surface of one CdTe NC.

Activatable QD-Based Near-Infrared Fluorescence Probe for Sensitive Detection and Imaging of DNA

Accurate detection of DNA is essential for the precise diagnosis of diseases. Here we report an activatable near-infrared (NIR) fluorescence nanoprobe (QD-Al-GFLX) composed of NIR quantum dots (QDs) and Al(III)-gatifloxacin (Al-GFLX) complexes for the sensitive detection of double-stranded DNA (dsDNA) both in aqueous solution and in living cells. We demonstrated that the initial strong NIR fluorescence of QDs in QD-Al-GFLX was quenched by the Al-GFLX complex via a photoinduced electron transfer (PET) mechanism. Upon interaction with dsDNA, the high binding affinity between dsDNA and Al-GFLX complex could trigger QD-Al-GFLX dissociation, which could eliminate the PET process, resulting in significant enhancement of NIR fluorescence. QD-Al-GFLX was sensitive and specific to detect dsDNA in aqueous solution, with a detection limit of 6.83 ng/mL. The subsequent fluorescence imaging revealed that QD-Al-GFLX holds a high ability to enter into live cells, generating strong NIR fluorescence capable of reporting on dsDNA levels. This study highlighted the potential of using QD-Al-GFLX nanoprobe for the real-time detection and imaging of dsDNA in living cells.

Protease sensing using nontoxic silicon quantum dots

Herein is presented a proof-of-concept study of protease sensing that combines nontoxic silicon quantum dots (SiQDs) with Förster resonance energy transfer (FRET). The SiQDs serve as the donor and an organic dye as the acceptor. The dye is covalently attached to the SiQDs using a peptide linker. Enzymatic cleavage of the peptide leads to changes in FRET efficiency. The combination of interfacial design and optical imaging presented in this work opens opportunities for use of nontoxic SiQDs relevant to intracellular sensing and imaging.

Nanotechnology-Enhanced No-Wash Biosensors for in Vitro Diagnostics of Cancer

In vitro biosensors have been an integral component for early diagnosis of cancer in the clinic. Among them, no-wash biosensors, which only depend on the simple mixing of the signal generating probes and the sample solution without additional washing and separation steps, have been found to be particularly attractive. The outstanding advantages of facile, convenient, and rapid response of no-wash biosensors are especially suitable for point-of-care testing (POCT). One fast-growing field of no-wash biosensor design involves the usage of nanomaterials as signal amplification carriers or direct signal generating elements. The analytical capacity of no-wash biosensors with respect to sensitivity or limit of detection, specificity, stability, and multiplexing detection capacity is largely improved because of their large surface area, excellent optical, electrical, catalytic, and magnetic properties. This review provides a comprehensive overview of various nanomaterial-enhanced no-wash biosensing technologies and focuses on the analysis of the underlying mechanism of these technologies applied for the early detection of cancer biomarkers ranging from small molecules to proteins, and even whole cancerous cells. Representative examples are selected to demonstrate the proof-of-concept with promising applications for in vitro diagnostics of cancer. Finally, a brief discussion of common unresolved issues and a perspective outlook on the field are provided.