Controlling the Activity and Stability of Electrochemical Interfaces Using Atom-by-Atom Metal Substitution of Redox Species

Poly(ethylene oxide)-based composite solid electrolyte for long cycle life solid-state lithium metal batteries: Improvement of interface stability through a dual mechanism

Solid-state lithium metal batteries (SSLMBs) are promising candidates for safe and high-energy-density next-generation applications. However, harmful interfacial decomposition and uneven Li deposition lead to poor ion transport, a short cycle life, and battery failure. Herein, we propose a novel poly(ethylene oxide) (PEO)-based composite solid electrolyte (CSE) containing succinonitrile (SN) and zinc oxide (ZnO) nanoparticles (NPs), which improves interface stability through a dual mechanism. (1) By anchoring bis(trifluoromethanesulfonyl)imide (TFSI) anions to ZnO, a reliable solid electrolyte interface (SEI) later with abundant LiF can be obtained to inhibit interface decomposition. (2) The immobilization of escaping SN molecules in the SEI layer by ZnO NPs promotes the self-polymerization of SN and facilitates charge transfer through the interface. As a result, the ion conductivity of the stainless steel-symmetrical battery reaches 1.1 × 10-4 S cm-1 at room temperature, and a LiFePO4 (LFP) full battery exhibits ultrahigh stability (800 cycles) at 0.5 C. Thus, the present study provides valuable insights for the development of advanced PEO-based SSLMBs.

Controlled Formation of Fused Metal Chalcogenide Nanoclusters Using Soft Landing of Gaseous Fragment Ions

The complete ligation of nanoclusters significantly reduces their chemical reactivity, catalytic activity, and charge transfer properties. Therefore, in applications, nanoclusters are activated through partial ligand removal to take advantage of their full potential. However, the precise control of ligand removal in the condensed phase is challenging. In this study, we examine the reactivity of well-defined activated nanoclusters on surfaces prepared through controlled ligand removal in the gas phase. To accomplish this, we utilized a specially designed ion soft-landing instrument equipped with a collision cell to prepare mass-selected fragment ions, which were then deposited onto self-assembled monolayer (SAM) surfaces. Specifically, we generated fragment ions by selectively removing one or two ligands from a series of atomically precise ligated metal sulfide clusters, Co5MS8(L1)6+ (M = Co, Mn, Fe, or Ni, L1 = PEt3). Removal of one ligand from Co5MS8(L1)6+ (M = Co, Mn, Ni) generates Co5MS8(L1)5+ species, which undergo selective dimerization on SAMs. Meanwhile, Co5FeS8(L1)5+ is unreactive and remains intact when it is deposited onto a SAM surface. In contrast, fragments formed by the removal of two ligands, Co5MS8(L1)4+, undergo several nonselective reactions and generate larger fused clusters. We found that the reactivity of the Co5MS8(L1)5+ fragment ions is correlated with the gas phase stability of the corresponding precursor ion toward ligand loss. Specifically, the relatively unstable precursor ion, Co5FeS8(L1)6+, generates the least reactive fragment. Meanwhile, the more stable precursor ions generate more reactive Co5MS8(L1)5+ fragments that dimerize on surfaces. This observation was also confirmed by co-deposition of fragment ions with two different ligands, Co5MS8(L1)5+ and Co5MS8(L2)5+ (L1 = PEt3 and L2 = PEt2Ph), where fragments generated from more stable precursor ions tend to dimerize and generate dimers with mixed ligands. This study unveils the previously unrecognized potential of fragment ions in generating compounds that are difficult to synthesize using conventional methods. Additionally, it provides a mechanistic understanding of the observed reactivity. Mass-selected deposition of well-defined fragment ions emerges as a powerful approach for designing materials by precisely activating and depositing undercoordinated ligated nanoclusters onto surfaces.

Exploring the Reactivity of Polyoxometalates toward Proteins: From Interactions to Mechanistic Insights

The latest advances in the study of the reactivity of metal-oxo clusters toward proteins showcase how fundamental insights obtained so far open new opportunities in biotechnology and medicine. In this Perspective, these studies are discussed through the lens of the reactivity of a family of soluble anionic metal-oxo nanoclusters known as polyoxometalates (POMs). POMs act as catalysts in a wide range of reactions with several different types of biomolecules and have promising therapeutic applications due to their antiviral, antibacterial, and antitumor activities. However, the lack of a detailed understanding of the mechanisms behind biochemically relevant reactions-particularly with complex biological systems such as proteins-still hinders further developments. Hence, in this Perspective, special attention is given to reactions of POMs with peptides and proteins showcasing a molecular-level understanding of the reaction mechanism. In doing so, we aim to highlight both existing limitations and promising directions of future research on the reactivity of metal-oxo clusters toward proteins and beyond.

Influence of surface and intermolecular interactions on the properties of supported polyoxometalates

Polyoxometalates (POMs) with localized radical or open-shell metal sites have the potential to be used as transformative electronic spin based molecular qubits (MQs) for quantum computing (QC). For practical applications, MQs have to be immobilized in electronically or optically addressable arrays which introduces interactions with supports as well as neighboring POMs. Herein, we synthesized Keggin POMs with both tungsten (W) and vanadium (V) addenda atoms. Ion soft landing, a highly-controlled surface modification technique, was used to deliver mass-selected V-doped POMs to different self-assembled monolayer surfaces on gold (SAMs) without the solvent, counterions, and contaminants that normally accompany deposition from solution. Alkylthiol, perfluorinated, and carboxylic-acid terminated monolayers were employed as representative model supports on which different POM-surface and POM-POM interactions were characterized. We obtained insights into the vibrational properties of supported V-doped POMs and how they are perturbed by interactions with specific surface functional groups using infrared reflection absorption and scattering-type scanning near-field optical microscopy, as well as tip enhanced Raman spectroscopy. Different functional groups on SAMs and nanoscale heterogeneity are both shown to modulate the observed spectroscopic signatures. Spectral shifts are also found to be dependent on POM-POM interactions. The electronic structure of the V-doped POMs was determined in the gas phase using negative ion photoelectron spectroscopy and on surfaces with scanning Kelvin probe microscopy. The chemical functionality and charge transfer properties of the SAMs are demonstrated to exert an influence on the charge state and electronic configuration of supported V-doped POMs. The geometric and electronic structure of the POMs were also calculated using density functional theory. Our joint experimental and theoretical findings provide insight into how V substitution as well as POM-surface and POM-POM interactions influence the vibrational properties of POMs.

Coordination-Dependent Chemical Reactivity of TFSI Anions at a Mg Metal Interface

Charge transfer across the electrode-electrolyte interface is a highly complex and convoluted process involving diverse solvated species with varying structures and compositions. Despite recent advances in in situ and operando interfacial analysis, molecular specific reactivity of solvated species is inaccessible due to a lack of precise control over the interfacial constituents and/or an unclear understanding of their spectroscopic fingerprints. However, such molecular-specific understanding is critical to the rational design of energy-efficient solid-electrolyte interphase layers. We have employed ion soft landing, a versatile and highly controlled method, to prepare well-defined interfaces assembled with selected ions, either as solvated species or as bare ions, with distinguishing molecular precision. Equipped with precise control over interfacial composition, we employed in situ multimodal spectroscopic characterization to unravel the molecular specific reactivity of Mg solvated species comprising (i.e., bis(trifluoromethanesulfonyl)imide, TFSI^-) anions and solvent molecules (i.e., dimethoxyethane, DME/G1) on a Mg metal surface relevant to multivalent Mg batteries. In situ multimodal spectroscopic characterization revealed higher reactivity of the undercoordinated solvated species [Mg-TFSI-G1]⁺ compared to the fully coordinated [Mg-TFSI-(G1)₂]⁺ species or even the bare TFSI^-. These results were corroborated by the computed reaction pathways and energy barriers for decomposition of the TFSI^- within Mg solvated species relative to bare TFSI^-. Finally, we evaluated the TFSI reactivity under electrochemical conditions using Mg(TFSI)₂-DME-based phase-separated electrolytes representing different solvated constituents. Based on our multimodal study, we report a detailed understanding of TFSI^- decomposition processes as part of coordinated solvated species at a Mg-metal anode that will aid the rational design of improved sustainable electrochemical energy technologies.

Gas-phase fragmentation of single heteroatom-incorporated Co5MS8(PEt3)6+ (M = Mn, Fe, Co, Ni) nanoclusters

Functionalization of metal-chalcogenide clusters by either replacing core atoms or by tuning the ligand is a powerful technique to tailor their properties. Central to this approach is understanding the competition between the strength of the metal-ligand and metal-metal interactions. Here, using collision-induced dissociation of atomically precise metal sulfide nanoclusters, Co₅MS₈L₆⁺ (L = PEt₃, M = Mn, Fe, Co, Ni) and Co_5-xFe_xS₈L₆⁺ (x = 1-3), we study the effect of a heteroatom incorporation on the core-ligand interactions and relative stability towards fragmentation. Sequential ligand loss is the dominant dissociation pathway that competes with ligand sulfide (LS) loss. Because the ligands are attached to metal atoms, LS loss is an unusual dissociation pathway, indicating significant rearrangement of the core prior to fragmentation. Both experiments and theoretical calculations indicate the reduced stability of Co₅MnS₈L₆⁺ and Co₅FeS₈L₆⁺ towards the first ligand loss in comparison with their Co₆S₈L₆⁺ and Co₅NiS₈L₆⁺ counterparts and provide insights into the core-ligand interaction.

Manipulation of the MoO2/MoSe2 Heterointerface Boosting High Rate and Durability for Sodium/Potassium Storage

The main challenge for sodium/potassium ion storage is to find the suitable host materials to accommodate the larger-sized Na⁺/K⁺ and conquer the sluggish chemical kinetics. Herein, by selenation of polyoxometalate in electrospinning fiber, a novel MoO₂/MoSe₂ heterostructure embedded in one-dimensional (1D) N,P-doped carbon nanofiber (MoO₂/MoSe₂@NPC) is rationally constructed to show distinct enhancement of rate performance and cycle life for sodium ion batteries (SIBs) and potassium ion batteries (PIBs). The 1D skeleton of MoO₂/MoSe₂@NPC decreases the diffusion pathway of Na⁺/K⁺, and the doping of N/P heteroatoms in carbon fiber creates abundant active sites and provides good reachability for Na⁺/K⁺ transportation. MoSe₂ nanosheets grow in the bulk phase of MoO₂ via in situ local phase transformation to achieve effective and firm heterointerfaces. Especially, the exposure extent of heterointerfaces can be controlled by treatment temperature during the preparation process, and the optimized heterointerfaces result in an ideal synergic effect between MoO₂ and MoSe₂. DFT calculations confirm that the internal electric field in the heterogeneous interface guides the electron transfer from MoO₂ to MoSe₂, combined with strong adsorption capacity toward sodium/potassium, facilitating ion/electron transfer kinetics. It is confirmed that the MoO₂/MoSe₂@NPC anode for SIBs delivers 382 mA h g^-1 under 0.1 A g^-1 upon 200 cycles; meanwhile, a reversible capacity of 266 mA h g^-1 is maintained even under 2 A g^-1 after 2000 cycles. For PIBs, it can reach up to 216 mA h g^-1 in the 200th cycle and still retain 125 mA h g^-1 after 2000 cycles under 1 A g^-1. This study opens up a new interface manipulation strategy for the design of anode materials to boost fast Na⁺/K⁺ storage kinetics.

Integrated photoelectrochemical energy storage cells prepared by benchtop ion soft landing

The exceptional photochromic and redox properties of polyoxometalate anions, PW₁₂O₄₀³⁻, have been exploited to develop an integrated photoelectrochemical energy storage cell for conversion and storage of solar energy. Elimination of strongly coordinating cations using benchtop ion soft landing leads to a ∼370% increase in the maximum power output of the device. Additionally, the photocathode displayed a pronounced color change from clear to blue upon irradiation, which warrants the potential application of the IPES cell in advanced smart windows and photochromic lenses.

Soft landing eliminates counter cations from Keggin polyoxometalate-based photocathodes, resulting in a ∼370% increase in maximum power output from a novel device that simultaneously harvests and stores solar energy.

When Identification of the Reduction Sites in Mixed Molybdenum/Tungsten Keggin-Type Polyoxometalate Hybrids Turns Out Tricky

The mixed molybdenum/tungsten Keggin-type polyoxometalate (POM) hybrid (TBA)₄[PW₉Mo₂O₃₉{Sn(C₆H₄I)}] (TBA = tert-butylammonium) has been prepared by the reaction between [α-PW₉Mo₂O₃₉]^7– and [Cl₃Sn(C₆H₄I)] in dried acetonitrile, in the presence of tetra-n-butylammonium bromide. A further coupling reaction affords the ferrocenyl derivative (TBA)₄[PW₉Mo₂O₃₉{Sn(C₆H₄)C≡C(C₆H₄)Fc}]. The POM hybrids have been thoroughly characterized by NMR and IR spectroscopies. Electrochemical analysis confirms their ease of reduction compared to the all-W analogue, albeit with a second reduction process occurring at a lower potential than in the all-Mo species. It is noteworthy that the second reduction is accompanied by an unusual red shift of the electronic absorption spectrum. Whereas there is no doubt that the first reduction deals with Mo, the location of the second electron in the bireduced species, on the second Mo or on W, has thus been the subject of a cross-investigation by spectroelectrochemistry, electron spin resonance, and theoretical calculations. Finally, it came out that the second reduction is also Mo-centered with two unpaired and antiferromagnetically coupled extra electrons.

The sites for the successive reduction processes of a mixed molybdenum/tungsten Keggin-type organotin hybrid are debated through a combination of spectroelectrochemical investigations and theoretical calculations.

Design and Performance of a Soft-Landing Instrument for Fragment Ion Deposition

We report the development of a new high-flux electrospray ionization-based instrument for soft landing of mass-selected fragment ions onto surfaces. Collision-induced dissociation is performed in a collision cell positioned after the dual electrodynamic ion funnel assembly. The high duty cycle of the instrument enables high-coverage deposition of mass-selected fragment ions onto surfaces at a defined kinetic energy. This capability facilitates the investigation of the reactivity of gaseous fragment ions in the condensed phase. We demonstrate that the observed reactions of deposited fragment ions are dependent on the structure of the ion and the composition of either ionic or neutral species codeposited onto a surface. The newly developed instrument provides access to high-purity ion fragments as building blocks for the preparation of unique ionic layers.

Role of Polysulfide Anions in Solid-Electrolyte Interphase Formation at the Lithium Metal Surface in Li-S Batteries

Delineating intricate interactions between highly reactive Li-metal electrodes and the diverse constituents of battery electrolytes has been a long-standing scientific challenge in materials design for advanced energy storage devices. Here, we isolated lithium polysulfide anions (LiS₄^-) from an electrolyte solution based on their mass-to-charge ratio and deposited them on Li-metal electrodes under clean vacuum conditions using ion soft landing (ISL), a highly controlled interface preparation technique. The molecular level precision in the construction of these model interfaces with ISL, coupled with in situ X-ray photoelectron spectroscopy and ab initio theoretical calculations, allowed us to obtain unprecedented insight into the parasitic reactions of well-defined polysulfides on Li-metal electrodes. Our study revealed that the oxide-rich surface layer, which is amenable to direct electron exchange, drives multielectron sulfur oxidation (S⁰ → S⁶⁺) processes. Our results have substantial implications for the rational design of future Li-S batteries with improved efficiency and durability.

Insights from Adsorption and Electron Modification Studies of Polyoxometalates on Surfaces for Molecular Memory Applications

This Account highlights recent experimental and theoretical work focusing on the development of polyoxometalates (POMs) as possible active switching units in what may be called "molecule-based memory cells". Herein, we critically discuss how multiply charged vanadium-containing POMs, which exhibit stable metal-oxo bonds and are characterized by the excellent ability to change their redox states without significant structural distortions of the central polyoxoanion core, can be immobilized best and how they may work optimally at appropriate surfaces. Furthermore, we critically discuss important issues and challenges on the long way toward POM-based nanoelectronics. This Account is divided into four sections shedding light on POM interplay in solution and on surfaces, ion soft-landing of mass-selected POMs on surfaces, electronic modification of POMs on surfaces, and computational modeling of POMs on surfaces. The sections showcase the complex nature of far-reaching POM interactions with the chemical surroundings in solution and the properties of POMs in the macroscopic environment of electrode surfaces. Section 2 describes complex relationships of POMs with their counter-cations, solvent molecules, and water impurities, which have been shown to exhibit a direct impact on the resulting surface morphology, where a concentration-dependent formation of micellar structures can be potentially observed. Section 3 gives insights into the ion soft-landing deposition of mass-selected POMs on electrode surfaces, which emerges as an appealing method because the simultaneous deposition of agglomeration-stimulating counter-cations can be avoided. Section 4 provides details of electronic properties of POMs and their modification by external electronic stimuli toward the development of multiple-state resistive (memristive) switches. Section 5 sheds light on issues of the determination of the electronic structure properties of POMs across their interfaces, which is difficult to address by experiment. The studies summarized in these four sections have employed various X-ray-scattering, microscopy, spectroscopy, and computational techniques for imaging of POM interfaces in solution and on surfaces to determine the adsorption type, agglomeration tendency, distribution, and oxidation state of deposited molecules. The presented research findings and conceptual ideas may assist experimentalists and theoreticians to advance the exploration of POM electrical conductivity as a function of metal redox and spin states and to pave the way for a realization of ("brain-inspired") POM-based memory devices, memristive POM-surface device engineering, and energy efficient nonvolatile data storage and processing technologies.

Structure and Stability of the Ionic Liquid Clusters [EMIM]n[BF4]n+1- (n = 1-9): Implications for Electrochemical Separations

Precise functionalization of electrodes with size-selected ionic liquid (IL) clusters may improve the application of ILs in electrochemical separations. Herein we report our combined experimental and theoretical investigation of the IL clusters 1-ethyl-3-methylimidazolium tetrafluoroborate [EMIM]_n[BF₄]_n+1^- (n = 1-9) and demonstrate their selectivity and efficiency toward targeted adsorption of ions from solution. The structures and energies of the IL clusters, predicted with global optimization, agree with and help interpret the ion abundances and stabilities measured by high-mass-resolution electrospray ionization mass spectrometry and collision-induced dissociation experiments. The [EMIM][BF₄]₂^- cluster, which was identified as the most stable IL cluster, was selectively soft-landed onto a working electrode. Electrochemical impedance spectroscopy revealed a lower charge transfer resistance on the soft-landed electrode containing [EMIM][BF₄]₂^- compared with an electrode prepared by drop-casting of an IL solution containing the full range of IL clusters. Our findings indicate that specific IL clusters may be used to increase the efficiency of electrochemical separations by lowering the overpotentials involved.

Self-Assembly and Ionic-Lattice-like Secondary Structure of a Flexible Linear Polymer of Highly Charged Inorganic Building Blocks

Among molecular building blocks, metal oxide cluster anions and their countercations provide multiple options for the self-assembly of functional materials. Currently, however, rational design concepts are limited to electrostatic interactions with metal or organic countercations or to the attachment and subsequent reactions of functionalized organic ligands. We now demonstrate that bridging μ-oxo linkages can be used to string together a bifunctional Keggin anion building block, [PNb₂Mo₁₀O₄₀]^5- (1), the diniobium(V) analogue of [PV₂Mo₁₀O₄₀]^5- (2). Induction of μ-oxo ligation between the Nb^V═O moieties of 1 in acetonitrile via step-growth polymerization gives linear polymers with entirely inorganic backbones, some comprising over 140 000 repeating units, each with a 3- charge, exceeding that of previously reported organic or inorganic polyelectrolytes. As the chain grows, its flexible μ-oxo-linked backbone, with associated countercations, coils into a compact 270 nm diameter spherical secondary structure as a result of electrostatic interactions not unlike those within ionic lattices. More generally, the findings point to new options for the rational design of multidimensional structures based on μ-oxo linkages between Nb^V═O-functionalized building blocks.

Tunable Metal Oxide Frameworks via Coordination Assembly of Preyssler-Type Molecular Clusters

We present the synthesis of metal oxide frameworks composed of [NaP₅W₃₀O₁₁₀]^14- assembled with Mn, Fe, Co, Ni, Cu, or Zn bridging metal ions. X-ray diffraction shows that the frameworks adopt the same assembly regardless of bridging metal ion. Furthermore, our synthesis allows for the assembly of isostructural frameworks with mixed-metal ion bridges, or with clusters that have been doped with Mo, providing a high degree of compositional diversity. This consistent assembly enables investigation into the role of the building blocks in the properties of the metal oxide frameworks. The presence of bridging metal ions leads to increased conductivity compared to unbridged frameworks, and frameworks bridged with Fe have the highest conductivity. Additionally, Mo-doping can be used to enhance the conductivities of the frameworks. Similar structures can be obtained from clusters in which the central Na⁺ has been replaced with Bi³⁺ or Sm³⁺. Overall, the optical and electronic properties are tunable via choice of bridging metal ion and cluster building block and reveal emergent properties in these cluster-based frameworks. These results demonstrate the promise of using polyoxometalate clusters as building blocks for tunable complex metal oxide materials with emergent properties.

Gas-Phase Fragmentation of Host-Guest Complexes of Cyclodextrins and Polyoxometalates

Gas-phase fragmentation pathways of host-guest complexes of cyclodextrins (CDs) and polyoxometalates (POMs) were examined using collision-induced dissociation (CID). The host-guest complexes studied here were composed of two different classes of POMs-Keggin (PW₁₂O₄₀^3-) and Lindqvist (M₆O₁₉^2-, M = Mo, W)-and three types of CDs (α-, β-, and γ-CD) differing in the diameter of the inner cavity. The CD-POM complexes were generated either by mixing methanol solutions of POM and CD or through a one-step acidic condensation of tetraoxometalates MO₄^2- (M = Mo, W) with CDs for complexes with Keggin and Lindqvist anions, respectively, and introduced into the gas phase using electrospray ionization (ESI). We observe distinct differences in fragmentation pathways of the complexes of Keggin and Lindqvist POMs under high- and low-energy CID conditions. Specifically, direct dissociation and proton transfer from CD to POM accompanied by the separation of fragments is observed in CID of Keggin CD-POM complexes. In contrast, dissociation of CD complexes with Lindqvist POMs is dominated by the simultaneous loss of multiple water molecules. This unusual fragmentation channel is attributed to dissociation of the POM cluster inside the CD cavity accompanied by covalent bond formation between the fragments and CD and elimination of multiple water molecules. The observed covalent coupling of metal oxide clusters opens up opportunities for derivatization of macrocyclic host molecules using collisional excitation of gaseous non-covalent complexes.