Inorganic Nanotube Mesophases Enable Strong Self-Healing Fibers

Colloidal phase behavior of high aspect ratio clay nanotubes in symmetric and asymmetric electrolytes

HYPOTHESIS

Imogolite nanotubes (INTs) are unique anisometric particles with monodisperse nanometric diameters. Aluminogermanate double-walled INTs (Ge-DWINTs) are obtained with variable aspect ratios by controlling the synthesis conditions. It thus appears as an interesting model system to investigate how aspect ratio and ionic valence influence the colloidal behavior of highly anisometric rods.

EXPERIMENTS

The nanotubes were synthesized by hydrothermal treatment for 5 or 20 days to modify the aspect ratio while the electrostatic interactions were investigated by comparing the colloidal stability in symmetric and asymmetric electrolytes. The phase behavior and their related microstructure were determined by optical observations and small-angle X-ray scattering measurements, coupled with interparticle distance modelling.

FINDINGS

We revealed that colloidal suspensions of Ge-DWINTs prepared in NaCl are guided by repulsive double layer forces, undergoing different liquid crystal phase transitions before stiffen into a glass-like state. We found that the microstructure can be rationalized by taking into account the anisometric nature of the particles. By contrast, dispersions prepared with asymmetric electrolytes are governed by strong attractive forces and thus form space-filling gels containing large nanotubes aggregates.

Real-Time Monitoring of Adsorption-Induced Scrolling of Colloidal Inorganic Nanosheets

Inorganic nanotubes have attracted much attention due to their unique physicochemical properties. Nanotubes can be prepared by scrolling exfoliated nanosheets under ambient conditions. However, how the nanosheet scrolled in its colloidal state has not been experimentally visualized. In this paper, we directly observed the scrolling process of nanosheets upon adsorption of organic cations. Exfoliated flat nanosheets of niobate and clay in aqueous colloids were found to scroll by adding organic cations, such as exfoliation reagents, to the colloids. Employment of cationic stilbazolium dye enabled in situ observation of the dye adsorption and scrolling by optical microscopy based on changes in color and morphology of the nanosheets. The scrolling was promoted for nanosheets adsorbed with a stilbazolium dye with a longer alkyl chain, suggesting that the interaction between the hydrophobic parts of the dye cations is the driving force of the scrolling. This finding should encourage research on the formation of nanotubes from nanosheets and also provides important guidelines for the selection of appropriate exfoliation reagents when exfoliating nanosheets from layered crystals.

Self-Healable Multifunctional Fibers via Thermal Drawing

The development of soft electronics and soft fiber devices has significantly advanced flexible and wearable technology. However, they still face the risk of damage when exposed to sharp objects in real-life applications. Taking inspiration from nature, self-healable materials that can restore their physical properties after external damage offer a solution to this problem. Nevertheless, large-scale production of self-healable fibers is currently constrained. To address this limitation, this study leverages the thermal drawing technique to create elastic and stretchable self-healable thermoplastic polyurethane (STPU) fibers, enabling cost-effective mass production of such functional fibers. Furthermore, despite substantial research into the mechanisms of self-healable materials, quantifying their healing speed and time poses a persistent challenge. Thus, transmission spectra are employed as a monitoring tool to observe the real-time self-healing process, facilitating an in-depth investigation into the healing kinetics and efficiency. The versatility of the fabricated self-healable fiber extends to its ability to be doped with a wide range of functional materials, including dye molecules and magnetic microparticles, which enables modular assembly to develop distributed strain sensors and soft actuators. These achievements highlight the potential applications of self-healable fibers that seamlessly integrate with daily lives and open up new possibilities in various industries.

Nonclassical Growth Mechanism of Double-Walled Metal-Oxide Nanotubes Implying Transient Single-Walled Structures

The formation of imogolite nanotubes is reported to be a kinetic process involving intermediate roof-tile nanostructures. Here, the structural evolution occurring during the synthesis of aluminogermanate double-walled imogolite nanotubes is in situ monitored, thanks to an instrumented autoclave allowing the control of the temperature, the continuous measurement of pH and pressure, and the regular sampling of gas and solution. Chemical analyses confirm the completion of the precursor's conversion with the release of CO2 , ethanol, and dioxane as main side products. The combination of microscopic observations, infrared, and absorption spectroscopies with small and wide-angle X-ray scattering experiments unravel a unique growth mechanism implying transient single-walled nanotubes instead of the self-assembly of stacked proto-imogolite tiles. The growth formation of these transient nanotubes is followed at the molecular level by Quick-X-ray absoprtion specotrscopy experiments. Multivariate data analysis evidences that the near neighboring atomic environment of Ge evolves from monotonous to a more complex one as the reaction progresses. The following transformation into a double-walled nanotube takes place at a nearly constant mean radius, as demonstrated by the simulation of X-ray scattering diagrams. Overall, transient nanotubes appear to serve for the anchoring of a new wall, corresponding to a mechanism radically different from that proposed in the literature.

Wet spinning imogolite nanotube fibres: an in situ process study

Imogolite nanotubes (INTs) form transparent aqueous liquid-crystalline solutions, with strong birefringence and X-ray scattering power. They provide an ideal model system for studying the assembly of one-dimensional nanomaterials into fibres, as well as offering interesting properties in their own right. Here, in situ polarised optical microscopy is used to study the wet spinning of pure INTs into fibres, illustrating the influence of process variables during extrusion, coagulation, washing and drying on both structure and mechanical properties. Tapered spinnerets were shown to be significantly more effective than thin cylindrical channels for forming homogeneous fibres; a result related to simple capillary rheology by fitting a shear thinning flow model. The washing step has a strong influence of structure and properties, combining the removal of residual counter-ions and structural relaxation to produce a less aligned, denser and more networked structure; the timescales and scaling behavior of the processes are compared quantitatively. Both strength and stiffness are higher for INT fibres with a higher packing fraction and lower degree of alignment, indicating the importance of forming a rigid jammed network to transfer stress through these porous, rigid rod assemblies. The electrostatically-stabilised, rigid rod INT solutions were successfully cross-linked using multivalent anions, providing robust gels, potentially useful in other contexts.

The Influence of Cellulose Nanocrystal Characteristics on Regenerative Silk Composite Fiber Properties

Cellulose nanocrystals (CNCs), obtained from natural resources, possess great potential as a bioderived reinforcement for natural-fiber-reinforced composites (NFRPs) due to their superior crystallinity and high aspect ratio. To elucidate the specific parameters of CNCs that significantly affect their mechanical performance, various CNCs were investigated to fabricate high-performance nanocomposite fibers together with regenerated silk fibroin (RSF). We confirmed that the high aspect ratio (~9) of the CNCs was the critical factor to increase the tensile strength and stiffness rather than the crystallinity. At a 1 vol% of CNCs, the strength and stiffness reached ~300 MPa and 10.5 GPa, respectively, which was attributed not only to a stable dispersion but also to alignment. This approach has the potential to evaluate the parameters of natural reinforcement and may also be useful in constructing high-performance NFRPs.

Advances in High-Performance Autonomous Energy and Self-Powered Sensing Textiles with Novel 3D Fabric Structures

The seamless integration of emerging triboelectric nanogenerator (TENG) technology with traditional wearable textile materials has given birth to the next-generation smart textiles, i.e., textile TENGs, which will play a vital role in the era of Internet of Things and artificial intelligences. However, low output power and inferior sensing ability have largely limited the development of textile TENGs. Among various approaches to improve the output and sensing performance, such as material modification, structural design, and environmental management, a 3D fabric structural scheme is a facile, efficient, controllable, and scalable strategy to increase the effective contact area for contact electrification of textile TENGs without cumbersome material processing and service area restrictions. Herein, the recent advances of the current reported textile TENGs with 3D fabric structures are comprehensively summarized and systematically analyzed in order to clarify their superiorities over 1D fiber and 2D fabric structures in terms of power output and pressure sensing. The forward-looking integration abilities of the 3D fabrics are also discussed at the end. It is believed that the overview and analysis of textile TENGs with distinctive 3D fabric structures will contribute to the development and realization of high-power output micro/nanowearable power sources and high-quality self-powered wearable sensors.

Macroscopic Assembly of Sericin toward Self-Healable Silk

Silk contains an adhesive glycoprotein, silk sericin, in which silk fibroins can be enfolded and chemically stabilized. Silk sericin is gaining importance as the material for the creation of functional bioscaffolds. However, the assembly of silk sericin is generally limited to the blend of polymers or proteins due to its inherent poor mechanical strength. Here, we report a simple macroscopic controlled assembly of silk sericin fibers based on their secondary structure via wet-spinning. In addition, plasticization of silk sericin using glycerol immobilized with glutaraldehyde was found to induce dimensional stability, affording stable linear fibers with self-adhesion. Furthermore, cyclo-phenylalanine nanowires were incorporated into the silk sericin dope for a practical demonstration of their potential in artificial silk production with superstructure formation. The physicochemical characteristics of the spun fibers have also been elucidated using Fourier-transform infrared spectroscopy, electron microscopy, tensile test, differential scanning calorimetry, and 2D X-ray diffraction.

Effect of Polymer Length on the Adsorption onto Aluminogermanate Imogolite Nanotubes

This study evidences the adsorption of model nonionic polymers onto aluminogermanate imogolite nanotubes, attractive porous nanofillers with potential molecular loading and release applications. We resolve the underlying mechanisms between nanotubes and polyethylene glycols with different molecular weights by means of nanoisothermal titration calorimetry. The analysis of the results provides a direct thermodynamic characterization, allowing us to propose a detailed description of the energetics involved in the formation of polymer/imogolite complexes. The affinity toward the nanotube surface is enthalpy-driven and strongly depends on the polymer chain length, which significantly affects the polymer configuration and the flow properties of the resulting complexes, probed by small-angle neutron scattering and rheology, respectively. These findings open new avenues for the rational design of these hybrid mixtures for advanced applications.

Autonomous self-repair in piezoelectric molecular crystals

Living tissue uses stress-accumulated electrical charge to close wounds. Self-repairing synthetic materials, which are typically soft and amorphous, usually require external stimuli, prolonged physical contact, and long healing times. We overcome many of these limitations in piezoelectric bipyrazole organic crystals, which recombine following mechanical fracture without any external direction, autonomously self-healing in milliseconds with crystallographic precision. Kelvin probe force microscopy, birefringence experiments, and atomic-resolution structural studies reveal that these noncentrosymmetric crystals, with a combination of hydrogen bonds and dispersive interactions, develop large stress-induced opposite electrical charges on fracture surfaces, prompting an electrostatically driven precise recombination of the pieces via diffusionless self-healing.

Doping Liquid Crystals of Colloidal Inorganic Nanotubes by Additive-Free Metal Nanoparticles

Doping liquid-crystal phases with nanoparticles is a fast-growing field with potential breakthroughs due to the combination of the properties brought by the two components. One of the main challenges remains the long-term stability of the hybrid system, requiring complex functionalization of the nanoparticles at the expense of their self-assembly properties. Here we demonstrate the successful synthesis of additive-free noble-metal nanoparticles at the surface of charged inorganic nanotubes. Transmission electron microscopy and UV-visible spectroscopy confirm the stabilization of metallic nanoparticles on nanotubes. Meanwhile, the spontaneous formation of liquid-crystals phases induced by the nanotubes is observed, even after surface modification with metallic nanoparticles. Small-angle X-ray scattering experiments reveal that the average interparticle distance in the resulting hybrids can be easily modulated by controlling electrostatic interactions. As a proof-of-concept, we demonstrate the effectiveness of our method for the preparation of homogeneous transparent hybrid films with a high degree of alignment.

Continuous Binder-Free Fibers of Pure Imogolite Nanotubes

Imogolite nanotubes (INTs) display a range of useful properties and provide an ideal material system to study the assembly of nanomaterials into macroscopic fibers. A method of wet spinning pure, binder-free imogolite fibers has been developed using double-walled germanium imogolite nanotubes. The nanotube aspect ratio can be controlled during the initial synthesis and is critical to the spinning process. Fibers made from short nanotubes (<100 nm) have very low gel strengths, while dopes with longer nanotubes (500-1000 nm) are readily spinnable. The tensile behavior of the resulting imogolite nanotube fibers is strongly influenced by relative humidity (RH), with a modulus of 30 GPa at 10% RH compared to 2.8 GPa at 85% RH, as well as a change in failure mode. This result highlights the importance of inter-nanotube interactions in such assemblies and provides a useful strategy for further exploration. Interestingly, in the absence of a matrix phase, a degree of misorientation appears to improve load transfer between the individual INTs within the porous fiber, likely due to an increase in the number of interparticle contacts. Imogolite nanotubes are an appealing analogue to other nanotube fiber systems, and it is hoped that learnings from this system can also be used to improve carbon nanotube fibers.

Preparation and characterization of an imogolite/chitosan hybrid with pyridoxal-5′-phosphate as an interfacial modifier

Imogolite/chitosan hybrid films were prepared using pyridoxal-5′-phosphate (PLP) as an interfacial modifier. Thermogravimetric analysis and spectroscopic measurements revealed that the phosphate group of PLP was adsorbed on the imogolite. Furthermore, rheological measurements suggested that the PLP-modified imogolites (PLP–imogolite) had strong interactions with chitosan in solution. Moreover, UV absorption of the hybrid film showed that PLP and chitosan formed Schiff base linkages. Therefore, the hybrid films exhibited a significant improvement in their mechanical properties compared to those of pristine chitosan/imogolite hybrid films.

An eco-friendly hybrid film of chitosan and imogolite was prepared using pyridoxal-5′-phosphate as a surface modifier.

Termination Effects in Aluminosilicate and Aluminogermanate Imogolite Nanotubes: A Density Functional Theory Study

We investigate termination effects in aluminosilicate (AlSi) and aluminogermanate (AlGe) imogolite nanotubes (NTs) by means of semi-local and range-corrected hybrid Density Functional Theory (DFT) simulations. Following screening and identification of the smallest finite model capable of accommodating full relaxation of the NT terminations around an otherwise geometrically and electrostatically unperturbed core region, we quantify and discuss the effects of physical truncation on the structure, relative energy, electrostatics and electronic properties of differently terminated, finite-size models of the NTs. In addition to composition-dependent changes in the valence (VB) and conduction band (CB) edges and resultant band gap (BG), the DFT simulations uncover longitudinal band bending and separation in the finite AlSi and AlGe models. Depending on the given termination of the NTs, such longitudinal effects manifest in conjunction with the radial band separation typical of fully periodic AlSi and AlGe NTs. The strong composition dependence of the longitudinal and radial band bending in AlSi and AlGe NTs suggests different mechanisms for the generation, relaxation and separation of photo-generated holes in AlSi and AlGe NTs, inviting further research in the untapped potential of imogolite compositional and structural flexibility for photo-catalytic applications.