Metallic Liquid Gating Membranes

Improved Recovery of Captured Airborne Bacteria and Viruses with Liquid-Coated Air Filters

The COVID-19 pandemic has revealed the importance of the detection of airborne pathogens. Here, we present composite air filters featuring a bioinspired liquid coating that facilitates the removal of captured aerosolized bacteria and viruses for further analysis. We tested three types of air filters: commercial polytetrafluoroethylene (PTFE), which is well known for creating stable liquid coatings, commercial high-efficiency particulate air (HEPA) filters, which are widely used, and in-house-manufactured cellulose nanofiber mats (CNFMs), which are made from sustainable materials. All filters were coated with omniphobic fluorinated liquid to maximize the release of pathogens. We found that coating both the PTFE and HEPA filters with liquid improved the rate at which Escherichia coli was recovered using a physical removal process compared to uncoated controls. Notably, the coated HEPA filters also increased the total number of recovered cells by 57%. Coating the CNFM filters did not improve either the rate of release or the total number of captured cells. The most promising materials, the liquid-coated HEPA, filters were then evaluated for their ability to facilitate the removal of pathogenic viruses via a chemical removal process. Recovery of infectious JC polyomavirus, a nonenveloped virus that attacks the central nervous system, was increased by 92% over uncoated controls; however, there was no significant difference in the total amount of genomic material recovered compared to that of controls. In contrast, significantly more genomic material was recovered for SARS-CoV-2, the airborne, enveloped virus, which causes COVID-19, from liquid-coated filters. Although the amount of infectious SARS-CoV-2 recovered was 58% higher, these results were not significantly different from uncoated filters due to high variability. These results suggest that the efficient recovery of airborne pathogens from liquid-coated filters could improve air sampling efforts, enhancing biosurveillance and global pathogen early warning.

Wetting-Induced Water Promoted Flow on Tunable Liquid-Liquid Interface-Based Nanopore Membrane System

Membrane separation provides effective methods for solving the global water crisis. Contemporary membrane systems depend on interfacial interactions between liquid and solid membrane matrixes. However, it may lead to a limiting permeate flux due to the large flow resistance at hydrophobic liquid-solid interfaces. Herein, the liquid-liquid interface with improved interface energy is reversibly introduced in membrane systems to boost wetting and reduce transport resistance. A series of interfaces were systematically explored to reveal mechanisms of wetting and boosted flow performances, which are further supported by simulations. Findings of this study highlight that interfacial liquids with lower surface energies, lower viscosities, and higher solubilities can effectively improve water flow without sacrificing rejection performance, achieving by transforming a solid-liquid interface into liquid-liquid interface interaction. It provides a concept to design advanced membrane systems for water purification (e.g., desalination and oil-water separation) and energy conversion processes.

Nontoxic Liquid-Infused Slippery Coating Prepared on Steel Substrates Inhibits Corrosion and Biofouling Adhesion

Wetting of surfaces plays a vital role in many biological and industrial processes. There are several phenomena closely related to wetting such as biofouling and corrosion that cause the deterioration of materials, while the efforts to prevent the degradation of surface functionality have spread over several millennia. Antifouling coatings have been developed to prevent/delay both corrosion and biofouling, but the problems remain unsolved, influencing the everyday life of the modern society in terms of safety and expenses. In this study, liquid-infused slippery surfaces (LISSs), a recently developed nontoxic repellent technology, that is, a flat variation of omniphobic slippery liquid-infused porous surfaces (SLIPSs), were studied for their anti-corrosion and marine anti-biofouling characteristics on metallic substrates under damaged and plain undamaged conditions. Austenitic stainless steel was chosen as a model due to its wide application in aquatic environments. Our LISS coating effectively prevents biofouling adhesion and decays corrosion of metallic surfaces even if they are severely damaged. The mechanically robust LISS reported in this study significantly extends the SLIPS technology, prompting their application in the marine environment due to the synergy between the facile fabrication process, rapid binding kinetics, nontoxic, ecofriendly, and low-cost applied materials together with excellent repellent characteristics.

From Sticky to Slippery: Self-Functionalizing Lubricants for In Situ Fabrication of Liquid-Infused Surfaces

Liquid-infused surfaces offer a versatile approach to create self-cleaning coatings. In such coatings, a thin film of a fluid lubricant homogeneously coats the substrate and thus prevents direct contact with a second, contaminating liquid. For stable repellency, the interfacial energies need to be controlled to ensure that the lubricant is not replaced by the contaminating liquid. Here, we introduce the concept of self-functionalizing lubricants. Functional molecular species that chemically match the lubricant but possess selective anchor groups are dissolved in the lubricant and self-adhere to the surface, forming the required surface chemistry in situ from within the applied lubricant layer. To add flexibility to the self-functionalizing concept, the substrate is first primed with a thin polydopamine base layer, which can be deposited to nearly any substrate material from aqueous solutions and retains reactivity toward electron-donating groups such as amines. The temporal progression of the in situ functionalization is investigated by ellipsometry and quartz crystal microbalance and correlated to macroscopic changes in contact angle and contact angle hysteresis. The flexibility of the approach is underlined by creating repellent coatings with various substrate/lubricant combinations. The prepared liquid-infused surfaces significantly reduce cement adhesion and provide easy-to-clean systems under real-world conditions on shoe soles.

Electrospun Liquid-Infused Membranes for Emulsified Oil/Water Separation

From an environmental perspective, microfiltration membranes are attractive for the separation of emulsified oils from contaminated water. However, fouling of the membrane is a major drawback of the technology. "Liquid-infused membranes" (LIMs) have the potential to eliminate membrane fouling. Here, we demonstrate the practical application of LIMs for the separation of oil from a stable oil-in-water emulsion and characterize their resistance to fouling. The base membrane is an electrospun nonwoven fibrous layer of the fluorinated copolymer poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP). The surface energy of the PVDF-co-HFP fibers was lowered by the covalent attachment of a fluorinated silane (PFOCTS), and then, the membrane was infused with a perfluoropolyether. The membrane was then challenged with model emulsions of dodecane in water in a cross-flow configuration. This PFOCTS-modified LIM showed better infused liquid stability, permeation selectivity, higher permeate flux than the unmodified LIM, and better anti-fouling properties than the bare membrane without infused liquid. We also examine the mechanism for transport of the dispersed oil phase through the liquid-infused membrane. We find a linear relationship between the dodecane flux and dodecane concentration in the feed and a higher dodecane flux through the PFOCTS-modified membrane than the unmodified one, which suggests that the capture of dodecane droplets from the feed plays an important role in determining the overall rate of permeation. Other factors such as lower viscosity of the infused liquid, larger pore size, and higher operating pressure also improved the permeate flux through the LIMs. Overall, this work provides some guidelines on the design of composite membranes comprising infused liquids and the choice of operating conditions for the filtration process.

Liquid-Based Adaptive Structural Materials

Structural materials are used to provide stable mechanical architectures and transmit or support forces, and they play an important role in materials science and technology. During the long process of the exploitation of structural materials, the functionality of structural materials has gained prominence. Adaptive structures responding to external stimuli have come to the fore with significant advantages in structural materials. However, many solid adaptive structural materials still suffer from their single function and the lack of dynamic performance, such as issue around fouling and energy consumption, defects present everywhere in materials at the microscale, etc. To meet the increasing demands, more and more researchers have started turning their attention to liquid-based materials owing to their intrinsic spontaneous, dynamic, and functional properties. Liquid-based adaptive structural materials (LASMs) have been proposed and developed. Building upon both dynamic liquids and fixed solids, LASMs have been demonstrated to possess both dynamic adaptivity (from the active liquid part) and stable mechanical structure (from the fixed solid part), which are desired in many applications such as 3D printing, droplet manipulation, omniphobic surfaces, microfluidics, mass separation, etc. A unifying view of the recent progress of LASMs is presented, including liquid with particles, liquid with surfaces, as well as liquid with membranes. In addition, the discussion of the prospects and challenges are provided for promoting the development of LASMs.

Solid-Liquid Host-Guest Composites: The Marriage of Porous Solids and Functional Liquids

Composite materials can provide remarkable improvements over the individual constituents. Especially, with a liquid component introduced into a solid porous host, solid-liquid host-guest composites have recently come to the forefront with exceptional functions that promise them for a wealth of applications. Combining the unprecedented dynamic, transparent, omniphobic, self-healing, diffusive and adaptive nature of functional liquid with inherent solid host's property, solid-liquid host-guest composites can realize the ease of fabrication, long-term stability, and a broad spectrum of enhanced properties, which cannot be fully met by conventional solid-solid composites or liquid-liquid composites. This review presents the state-of-the-art progress in solid-liquid host-guest composites. Initially, the concept, classification, design strategy, as well as fabrication methods as a path forward to develop the composites are unraveled, and further it is elaborated on how the functionality of porous solid and functional liquid can be harnessed to create composites with a broad range of unique properties, especially, the optical, thermal, electric, mechanical, sorption, and separation properties. With these fascinating properties, a myriad of emerging applications such as optical devices, thermal management, electromagnetic-interference shielding, soft electronics, gas capture and release, and multiphase separations are touched upon, inspiring more frontier researches in materials science, interfacial chemistry, membrane science, engineering, and multidisciplinary. Finally, this review provides the perspective on the future directions of solid-liquid host-guest composites and assesses the challenges and opportunities ahead.

Liquid gating technology

Recent years have witnessed the emergence of liquid gating technologies that employ liquids as structural materials to provide dynamic gating control. Such technologies have attracted considerable attention globally owing their antifouling, energy-saving, reversible, and reconfigurable characteristics. This study considers a new perspective to discuss advancements in liquid gating technologies, including the concept, mechanisms, development, designs, and emerging applications. Moreover, recommendations are provided for the selection of the gating liquid and porous matrix, preparation processes, technical parameters, and theoretical modelling to guide related research. Emerging applications of liquid gating technologies, such as microscale flow control, multiphase separation, chemical detection, and biomedical catheters, are reported. Finally, the challenges currently faced by these technologies are discussed and potential directions for further research are explored to promote the use of these technologies in future applications.

Light-responsive and corrosion-resistant gas valve with non-thermal effective liquid-gating positional flow control

Safe and precise control of gas flow is one of the key factors to many physical and chemical processes, such as degassing, natural gas transportation, and gas sensor. In practical application, it is essential for the gas-involved physicochemical process to keep everything under control and safe, which significantly relies on the controllability, safety, and stability of their valves. Here we show a light-responsive and corrosion-resistant gas valve with non-thermal effective liquid-gating positional flow control under a constant pressure by incorporating dynamic gating liquid with light responsiveness of solid porous substrate. Our experimental and theoretical analysis reveal that the photoisomerization of azobenzene-based molecular photoswitches on the porous substrate enabled the gas valve to possess a light-responsive and reversible variation of substantial critical pressure of non-thermal effective gas flow switch. Moreover, the chemically inert gating liquid prevented the solid substrate from corrosion and, by combining with the high spatiotemporal resolution of light, the gas valve realizes a precisely positional open and close under a steady-state pressure. The application demonstrations in our results show the potentials of the new gas valve for bringing opportunities to many applications, such as gas-involved reaction control in microfluidics, soft actuators, and beyond.

Universal and Switchable Omni-Repellency of Liquid-Infused Surfaces for On-Demand Separation of Multiphase Liquid Mixtures

Mixtures of immiscible liquids are commonly found in the scenarios of environmental protection and many industrial applications. Compared to widely explored water-oil mixtures, small differences in the surface energy of organic liquids, especially for those in multiphase mixtures, make their separation a formidable challenge. Here, a family of versatile coatings based on the reactions between plant polyphenols and 3-aminopropyl triethoxysilane is introduced to regulate the wetting behavior of substrates by forming stable liquid-infused interfaces. The key finding is that when a coated substrate is prewetted with a liquid forming a stable liquid-infused interface, it becomes repellent to any other immiscible liquids. This phenomenon is independent of the surface energy of the initial wetting liquid. This exclusive wetting behavior can lead to distinctive repellency toward almost any liquid by the infusion of an immiscible liquid, even if the difference of surface energy and dielectric constant of a liquid pair is as small as 2.0 mJ m^-2 and 1.8, respectively, resulting in universal and switchable omni-repellency. Of particular importance is that the as-prepared coating makes possible the on-demand separation of multiphase liquid mixtures by both continuous membrane filtration and static absorption, presenting a green and cost-effective approach to addressing this major environmental and industrial challenge.

Electrochemically mediated gating membrane with dynamically controllable gas transport

The regulation of mass transfer across membranes is central to a wide spectrum of applications. Despite numerous examples of stimuli-responsive membranes for liquid-phase species, this goal remains elusive for gaseous molecules. We describe a previously unexplored gas gating mechanism driven by reversible electrochemical metal deposition/dissolution on a conductive membrane, which can continuously modulate the interfacial gas permeability over two orders of magnitude with high efficiency and short response time. The gating mechanism involves neither moving parts nor dead volume and can therefore enable various engineering processes. An electrochemically mediated carbon dioxide concentrator demonstrates proof of concept by integrating the gating membranes with redox-active sorbents, where gating effectively prevented the cross-talk between feed and product gas streams for high-efficiency, directional carbon dioxide pumping. We anticipate our concept of dynamically regulating transport at gas-liquid interfaces to broadly inspire systems in fields of gas separation, miniaturized devices, multiphase reactors, and beyond.

Bioinspired liquid gating membrane-based catheter with anticoagulation and positionally drug release properties

Catheters are indispensable medical devices that are extensively used in daily medical treatment. However, existing catheter materials continue to encounter many problems, such as thrombosis, single functionality, and inadaptability to environmental changes. Inspired by blood vessels, we develop a self-adaptive liquid gating membrane-based catheter with anticoagulation and positionally drug release properties. Our multifunctional liquid gating membrane-based catheter significantly attenuates blood clot formation and can be used as a general catheter design strategy to offer various drugs positionally releasing applications to comprehensively enhance the safety, functionality, and performance of medical catheters' materials.

Highly stretchable and reliable graphene oxide-reinforced liquid gating membranes for tunable gas/liquid transport

The ability of membrane technologies to dynamically tune the transport behavior for gases and liquids is critical for their applications. Although various methods have been developed to improve membrane success, tradeoffs still exist among their properties, such as permeability, selectivity, fouling resistance, and stability, which can greatly affect the performance of membranes. Existing elastomeric membrane designs can provide antifracture properties and flexibility; however, these designs still face certain challenges, such as low tensile strength and reliability. Additionally, researchers have not yet thoroughly developed membranes that can avoid fouling issues while realizing precise dynamic control over the transport substances. In this study, we show a versatile strategy for preparing graphene oxide-reinforced elastomeric liquid gating membranes that can finely modulate and dynamically tune the sorting of a wide range of gases and liquids under constant applied pressures. Moreover, the produced membranes exhibit antifouling properties and are adaptable to different length scales, pressures, and environments. The filling of graphene oxide in the thermoplastic polyurethane matrix enhances the composites through hydrogen bonds. Experiments and theoretical calculations are carried out to demonstrate the stability of our system. Our membrane exhibits good stretchability, recovery, and durability due to the elastic nature of the solid matrix and dynamic nature of the gating liquid. Dynamic control over the transport of gases and liquids is achieved through our optimized interfacial design and controllable pore deformation, which is induced by mechanical stimuli. Our strategy will create new opportunities for many applications, such as gas-involved chemical reactions, multiphase separation, microfluidics, multiphase microreactors, and particulate material synthesis.

Liquid-based porous membranes

The confluence of available membrane materials and the explorations into fluid behaviors have revolutionized liquid-based porous membranes, which deserve more attention.