Pulicaria undulata Extract-Mediated Eco-Friendly Preparation of TiO2 Nanoparticles for Photocatalytic Degradation of Methylene Blue and Methyl Orange

Green Synthesis of Metal-Doped ZnO Nanoparticles Using Bauhinia racemosa Lam. Extract and Evaluation of Their Photocatalysis and Biomedical Applications

A fascinating problem in the fields of nanoscience and nanobiotechnology has recently emerged, and to tackle this, the production of metal oxide nanoparticles using plant extracts offers numerous benefits over traditional physicochemical methods. In the present investigation, ZnO nanoparticles were fabricated from Bauhinia racemosa Lam. (BR) leaves extract with various transition metal (TM) dopants (Ni, Mn, and Co). Plant leaves extract containing metal nitrate solutions were utilized as a precursor to synthesize the pristine and TM-doped ZnO nanoparticles. Structural, functional, optical, and surface properties of the fabricated samples were studied by using physicochemical and photoelectrochemical measurements. The organic pollutants tetracycline (TC), ampicillin (AMP), and amoxicillin (AMX) were used in the photocatalytic degradation assessment of the fabricated samples. Through X-ray diffraction (XRD) and transmission electron microscopy (TEM) investigation, the fabricated nanoparticles wurtzite crystal structure was verified. Moreover, Fourier transform infrared (FT-IR) analysis verified the existence of functional groups in the fabricated nanoparticles. The migration of electrons from the deep donor level and zinc interstitial to the Zn-defect and O-defect is related to the emission peaks seen at 468, 480, 534, and 450 nm in photoluminescence (PL) spectra. Co-ZnO nanoparticles demonstrated potent and excellent photocatalytic degradation performance for TC (91.09%), AMP (87.97%), and AMX (92.42%) antibiotics within 210, 180, and 150 min of visible light irradiation. Co-ZnO nanoparticles also demonstrated strong antimicrobial performance against Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, Aspergillus flavus, Aspergillus niger, and Bacillus subtilis. Further investigation of in vitro cytotoxic potential against the A549 cell line (IC50 = 24 ± 0.5 μg/mL) utilizing MTT assay and the free radical scavenging performance of Co-ZnO nanoparticles estimated by DPPH assay utilizing l-ascorbic acid as a reference was also performed. Anti-inflammatory potential is also reviewed by comparing it with the standard drug Diclofenac, and the maximum activity was obtained for Ni-ZnO nanoparticles (IC50 = 72.4 μg/mL).

Morphology Controlled Deposition of Vanadium Oxide (VOx) Nanoparticles on the Surface of Highly Reduced Graphene Oxide for the Photocatalytic Degradation of Hazardous Organic Dyes

Semiconducting nanomaterials based heterogeneous photocatalysis represent a low-cost, versatile technique for environmental remediation, including pollution mitigation, energy management and other environmental aspects. Herein, we demonstrate the syntheses of various heterogeneous photocatalysts based on highly reduced graphene oxide (HRG) and vanadium oxide (VOx)-based nanocomposites (HRG-VOx). Different shapes (rod, sheet and urchin forms) of VOx nanoparticles were successfully fabricated on the surface of HRG under solvo-/hydrothermal conditions by varying the amount of water and ethanol. The high concentration of water in the mixture resulted in the formation of rod-shaped VOx nanoparticles, whereas increasing the amount of ethanol led to the production of VOx sheets. The solvothermal condition using pure ethanol as solvent produced VOx nano-urchins on the surface of HRG. The as-prepared hybrid materials were characterized using various spectroscopic and microscopic techniques, including X-ray diffraction, UV-vis, FTIR, SEM and TEM analyses. The photocatalytic activities of different HRG-VOx nanocomposites were investigated for the photodegradation of methylene blue (MB) and methyl orange (MO). The experimental data revealed that all HRG-VOx composite-based photocatalysts demonstrated excellent performance toward the photocatalytic degradation of the organic dyes. Among all photocatalysts studied, the HRG-VOx nanocomposite consisting of urchin-shaped VOx nanoparticles (HRG-VOx-U) demonstrated superior photocatalytic properties towards the degradation of dyes.

Light-Driven Catalytic Activity of Green-Synthesized SnO2/WO3-x Hetero-nanostructures

This work reports an environmentally friendly and economically feasible green synthesis of monometallic oxides (SnO₂ and WO₃) and their corresponding mixed metal oxide (SnO₂/WO_3-x) nanostructures from the aqueous Psidium guajava leaf extract for light-driven catalytic degradation of a major industrial contaminant, methylene blue (MB). P. guajava is a rich source of polyphenols that acts as a bio-reductant as well as a capping agent in the synthesis of nanostructures. The chemical composition and redox behavior of the green extract were investigated by liquid chromatography-mass spectrometry and cyclic voltammetry, respectively. Results acquired by X-ray diffraction and Fourier transform infrared spectroscopy confirm the successful formation of crystalline monometallic oxides (SnO₂ and WO₃) and bimetallic SnO₂/WO_3-x hetero-nanostructures capped with polyphenols. The structural and morphological aspects of the synthesized nanostructures were analyzed by transmission electron microscopy and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. Photocatalytic activity of the synthesized monometallic and hetero-nanostructures was investigated for the degradation of MB dye under UV light irradiation. Results indicate a higher photocatalytic degradation efficiency for mixed metal oxide nanostructures (93.5%) as compared to pristine monometallic oxides SnO₂ (35.7%) and WO₃ (74.5%). The hetero-metal oxide nanostructures prove to be better photocatalysts with reusability up to 3 cycles without any loss in degradation efficiency or stability. The enhanced photocatalytic efficiency is attributed to a synergistic effect in the hetero-nanostructures, efficient charge transportation, extended light absorption, and increased adsorption of dye due to the enlarged specific surface area.

Biofabrication of Titanium Dioxide Nanoparticles Catalyzed by Solanum surattense: Characterization and Evaluation of their Antiepileptic and Cytotoxic Activities

The green synthesis of nanoparticles using plant extract is a new method that can be used in various biomedical applications. Therefore, the green approach was an aspect of ongoing research for the synthesis titanium dioxide nanoparticles (TiO₂ NP) using the Solanum surattense aqueous plant extract, which acts as a stabilizing and reducing agent. The synthesis of TiO₂ NPs was confirmed by energy dispersive X-ray (EDX), scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and UV-visible spectroscopy (UV-vis) analyses. The excitation energy to synthesize TiO₂ NPs was identified through the UV-vis spectrophotometric analysis at a wavelength of 244 nm. Further, the FT-IR spectroscopy visualized different biomolecules like OH, C=O, C-H, and C-O that were present in an aqueous extract of the plant and were responsible for the stabilization of TiO₂ NPs. The crystallinity and phase purity of TiO₂ NPs were illustrated by the sharp peaks of the XRD pattern. The spherical morphology with sizes ranging from 10 to 80 nm was examined using SEM images. The elemental composition of TiO₂ NPs was revealed by the intensity and narrow widths of titanium and oxygen using EDX analysis. This report also explains the antiepileptic activity of TiO₂ NPs in a maximal electroshock-induced epileptic (MESE) and pentylenetetrazol (PTZ) model. The synthesized TiO₂ NPs showed maximum antiepileptic activity in the PTZ model, significantly decreasing the convulsions (65.0 ± 5.50 s) at 180 mg/kg in contrast to standard drug phenytoin, whereas the MESE model was characterized by the appearance of extensor, clonus, and flexion. The results showed that synthesized TiO₂ NPs significantly reduced the time spent in each stage (15.3 ± 0.20, 16.8 ± 0.25, and 20.5 ± 0.14 s) at 180 mg/kg as compared to control groups. Furthermore, the cytotoxicity of synthesized produced TiO₂ NPs demonstrated that concentrations ≤80 μg/mL were biologically compatible.

Waste to catalyst: Role of agricultural waste in water and wastewater treatment

Presently, owing to the rapid development of industrialization and urbanization activities, a huge quantity of wastewater is generated that contain toxic chemical and heavy metals, imposing higher environmental jeopardies and affecting the life of living well-being and the economy of the counties, if not treated appropriately. Subsequently, the advancement in sustainable cost-effective wastewater treatment technology has attracted more attention from policymakers, legislators, and scientific communities. Therefore, the current review intends to highlight the recent development and applications of biochars and/or green nanoparticles (NPs) produced from agricultural waste via green routes in removing the refractory pollutants from water and wastewater. This review also highlights the contemporary application and mechanism of biochar-supported advanced oxidation processes (AOPs) for the removal of organic pollutants in water and wastewater. Although, the fabrication and application of agriculture waste-derived biochar and NPs are considered a greener approach, nevertheless, before scaling up production and application, its toxicological and life-cycle challenges must be taken into account. Furthermore, future efforts should be carried out towards process engineering to enhance the performance of green catalysts to improve the economy of the process.

Photocatalytic Activity Induced by Metal Nanoparticles Synthesized by Sustainable Approaches: A Comprehensive Review

Nanotechnology is a fast-expanding area with a wide range of applications in science, engineering, health, pharmacy, and other fields. Among many techniques that are employed toward the production of nanoparticles, synthesis using green technologies is the simplest and environment friendly. Nanoparticles produced from plant extracts have become a very popular subject of study in recent decades due to their diverse advantages such as low-cost synthesis, product stability, and ecofriendly protocols. These merits have prompted the development of nanoparticles from a variety of sources, including bacteria, fungi, algae, proteins, enzymes, etc., allowing for large-scale production with minimal contamination. However, nanoparticles obtained from plant extracts and phytochemicals exhibit greater reduction and stabilization and hence have proven the diversity of properties, like catalyst/photocatalyst, magnetic, antibacterial, cytotoxicity, circulating tumor deoxy ribo nucleic acid (CT-DNA) binding, gas sensing, etc. In the current scenario, nanoparticles can also play a critical role in cleaning wastewater and making it viable for a variety of operations. Nano-sized photocatalysts have a great scope toward the removal of large pollutants like organic dyes, heavy metals, and pesticides in an eco-friendly and sustainable manner from industrial effluents. Thus, in this review article, we discuss the synthesis of several metal nanoparticles using diverse plant extracts, as well as their characterization via techniques like UV–vis (ultraviolet–visible), XRD (X-ray diffraction), SEM (scanning electron microscopy), TEM (transmission electron microscopy), FTIR (Fourier transform infrared spectroscopy), etc., and catalytic activity on various hazardous systems.

Biogenic Photo-Catalyst TiO2 Nanoparticles for Remediation of Environment Pollutants

This article reports a benign environmentally friendly fabrication method of titanium dioxide (TDO) nanoparticles (named TDO NPs3, TDO NPs5, and TDO NPs8) using aqueous extract of durva herb waste. This synthesis process avoids use of harmful substances and persistent chemicals throughout the order and enables us to control the size of the nanomaterials. Characterization of TDO nanoparticles was analyzed by ultraviolet-visible spectroscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The morphological nature of the TDO samples was inspected by transmission electron microscopy, which indicated that the TDO NPs3, TDO NPs5, and TDO NPs8 were spherical in shape, with average sizes of 5.14, 12.54, and 29.61 nm, respectively. The stability of TDO nanoparticles was assessed using thermogravimetric analysis and dynamic light scattering analysis. These samples could be used for degradation of polluting industrial textile dyes, such as methylene blue (MB) and rhodamine B (Rh-B). Remarkably, the TDO NPs3 sample (5.14 nm size) exhibits a noticeable degradation of the MB dye in a shorter time period (50 min) than the TDO NPs8 sample with a size of 29.61 nm (120 min). The TDO NPs3 sample was also tested for degradation of Rh-B dye, showing high degradation efficiency over a short period of time (60 min). In contrast, the TDO NPs8 sample showed degradation of the Rh-B dye in 120 min. The effect of the dye concentration and the catalyst dose to remove dye pollutants has also been investigated. The synthesized TDO NPs act as exceptional catalysts for the degradation of dyes, and they are promising materials for the degradation of industrial polluting dyes.

Synthesis of Biogenic Silver Nanocatalyst and their Antibacterial and Organic Pollutants Reduction Ability

Plant-mediated nanoparticles are gaining popularity due to biologically active secondary metabolites that aid in green synthesis. This study describes a simple, environmentally friendly, dependable, and cost-effective production of silver nanoparticles utilizing Cucumis sativus and Aloe vera aqueous leaf extracts. The aqueous leaf extracts of Cucumis sativus and Aloe vera, which worked as a reducing and capping agent, were used to biosynthesize silver nanoparticles (AgNPs). The formation of surface plasmon resonance peaks at 403 and 405 nm corresponds to the formation of colloidal Ag nanoparticles. Similarly, the Bragg reflection peaks in X-ray diffraction patterns observed at 2θ values of 38.01°, 43.98°, 64.24°, and 77.12° representing the planes of [111], [200], [220], and [311] correspond to the face-centered cubic crystal structure of silver nanoparticles. Fourier transform infrared spectroscopy confirms that bioactive chemicals are responsible for the capping of biogenic silver nanoparticles. The size, structure, and morphology of AgNPs with diameters ranging from 8 to 15 nm were examined using transmission electron microscopy. Water contamination by azo dyes and nitrophenols is becoming a more significant threat every day. The catalytic breakdown of organic azo dye methyl orange (MO) and the conversion of para-nitrophenol (PNP) into para-aminophenol using sodium borohydride was evaluated using the prepared biogenic nanoparticles. Our nanoparticles showed excellent reduction ability against PNP and MO with rate constants of 1.51 × 10^-3 and 6.03 × 10^-4s^-1, respectively. The antibacterial activity of the nanomaterials was also tested against four bacteria: Staphylococcus aureus, Klebsiella pneumoniae, Enterobacter, and Streptococcus pneumoniae. These biogenic AgNPs displayed effective catalytic and antibacterial characteristics by reducing MO and PNP and decreasing bacterial growth.

Green Synthesis of Silver Nanoparticles Using Juniperus procera Extract: Their Characterization, and Biological Activity

Plant extract-based green synthesis of metal nanoparticles (NPs) has become a popular approach in the field of nanotechnology. In this present investigation, silver nanoparticles were prepared by an efficient and facile approach using Juniperus procera extract as a bioreducing and stabilizing agent. The as-synthesized silver nanoparticles (JP-AgNPs) were characterized by several characterization techniques such as UV–Vis, XRD, FT-IR, HR-TEM, and EDX analysis. The XRD analysis evidently confirms that the as-synthesized Ag nanoparticles (NPs) from Juniperus procera plant extract (JP-AgNPs) are crystalline in nature. FT-IR analysis confirms that the plant extract plays a dual role as a bioreducing and capping agent, while HR-TEM revealed the spherical morphology of as-synthesized JP-AgNPs with the size of ~23 nm. Furthermore, the synthesized JP-AgNPs were evaluated for antibacterial properties against several bacterial and fungal strains such as Staphylococcus aureus (ATCC 12228), Escherichia coli (ATCC 25922), Pseudomonas aeruginosa (ATCC 27853), Proteus mirabilis (ATCC 4753), Cryptococcus neoformans (ATCC 16620), and Candida albicans (ATCC 885-653). The JP-AgNPs displayed an efficient mean zone of inhibition (MZI) at 50.00 µL for bacterial associated with fungal pathogens than the plant extract. Mainly, MZI values against microbial pathogens were as follows; E. coli (17.17 ± 0.72 mm), P. mirabilis (14.80 ± 0.17 mm), and C. albicans (14.30 ± 0.60 mm), whereas JP-AgNPs showed moderate activity against P. aeruginosa (11.50 ± 0.29 mm) and C. neoformans (9.83 ± 0.44 mm). Notably, the tested JP-AgNPs have displayed almost similar antimicrobial activities with that of standard antimicrobial drugs, such as streptomycin and nystatin. The enhanced antimicrobial activity of JP-AgNPs can be ascribed to the quality of resultant NPs including, uniform size, shape, and aqueous colloidal stability of nanoparticles.