Improved eco-friendly CsSn0.5Ge0.5I3 perovskite photovoltaic efficiency beyond 20% with SMe-TATPyr hole-transporting layer

Perovskites composed of inorganic cesium (Cs) halide provide a route to thermally resistant solar cells. Nevertheless, the use of hole-transporting layers (HTLs) with hydrophobic additives is constrained by moisture-induced phase deterioration. Due to significant electrical loss, dopant-free HTLs are unable to produce practical solar cells. In this article, we designed a two-dimensional 1,3,6,8-tetrakis[5-(N,N-di(p-(methylthio)phenyl)amino-p-phenyl)-thiophen-2-yl]pyrene (termed SMe-TATPyr) molecule as a new HTL to regulate electrical loss in lead-free perovskite solar cells (PSCs). We optimized the power conversion efficiency (PCE) of PSCs based on mixed tin (Sn)/germanium (Ge) halide perovskite (CsSn0.5Ge0.5I3) by exploring different factors, such as the deep and shallow levels of defects, density of states at the valence band (NV), thickness of the perovskite film, p-type doping concentration (NA) of HTL, the series and shunt resistances, and so on. We carried out comparative research by employing the 1D-SCAPS (a solar cell capacitance simulator) analysis tool. Through optimization of the PSC, we obtained the highest parameters in the simulated solar cell structure of fluorine tin oxide (FTO)/titanium dioxide (TiO2)/CsSn0.5Ge0.5I3/SMe-TATPyr/gold (Au), and the PCE reached up to 20% with a fill factor (FF) of 81.89%.

Sunlight mediated removal of toxic pollutants from Yamuna wastewater using efficient nano TeO2-ZnO nanocomposites

We have utilised our TeO2-ZnO nanocomposites for Yamuna wastewater treatment in natural sunlight wherein the sampling site was Nigam Bodh Ghat, Kashmere Gate, Delhi. In BET isotherm, TZ NCs exhibited type IV isotherm forming a H3 like hysteric loop sustaining mesoporous characteristic with an increase in surface area, pore volume and pore diameter of 56.76 m2/g, 0.257 cc/g and 17.18 nm respectively, when compared to pristine ZnO NPs. Yamuna wastewater treatment was carried out using various concentrations of TZ NCs (range 0.1-0.3 g/500 mL) under natural sunlight. Post-treatment, all the physicochemical parameters such as DO, BOD, COD, Nitrates, Ammonia and Phenolic contents were found to be reduced to 10 times bringing Yamuna water parameters within safe limits. Our TZ NCs have shown to have high selectivity for the removal of Chromium from water. Out of all the three concentrations 0.2 g/500 mL or 0.4 mg/mL is the most optimum concentration of TZ NCs for complete Yamuna wastewater treatment. Also, the bacterial culture present in Yamuna water was killed by 90% using TZ having MIC of 0.1 mg/mL. The antibiofilm activity of TZ against K.pneumoniae MTCC 109 was also checked using Congo Red Agar Assay. The presence of heavy metals, their corresponding degradation and leaching studies were analysed using ICP-OES. TZ NCs showed a very minimal leaching rate of Zinc into the water, proving no toxicity associated with these nanocomposites. Further, to observe the safe disposal of TZ NCs into the soil, TZ NCs were utilised for ecotoxicity studies.

Enhancing methane production from anaerobic digestion of secondary sludge through lignosulfonate addition: Feasibility, mechanisms, and implications

This study explores the feasibility of using lignosulfonate, a byproduct of the pulp and paper industry, to facilitate sludge anaerobic digestion. Biochemical methane potential assays revealed that the maximum methane production was achieved at 60 mg/g volatile solids (VS) lignosulfonate, 22.18 % higher than the control. One substrate model demonstrated that 60 mg/g VS lignosulfonate boosted the hydrolysis rate, biochemical methane potential, and degradation extent of secondary sludge by 19.12 %, 21.87 %, and 21.11 %, respectively, compared to the control. Mechanisms unveiled that lignosulfonate destroyed sludge stability, promoted organic matter release, and enhanced subsequent hydrolysis, acidification, and methanogenesis by up to 31.30 %, 74.42 % and 28.16 %, respectively. Phytotoxicity assays confirmed that lignosulfonate promoted seed germination and root development of lettuce and Chinese cabbage, with seed germination index reaching 170 ± 10 % and 220 ± 22 %, respectively. The findings suggest that lignosulfonate addition offers a sustainable approach to sludge treatment, guiding effective management practices.

Effect of different etching times on the structural, morphological, electrical, and antimicrobial properties of mesoporous silicon

The present work focuses on the structural, morphological, electrical characteristics, and antibacterial activity of mesoporous silicon (PS) against S. aureus and E. coli. We depict the structural and antimicrobial activity of PS as a result of different etching times (10.0, 20.0, 30.0, 40.0, 50.0, and 60.0 min) with a current density of 100 mA/cm2. The structural and morphological characteristics of synthesized PS have been examined with Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM). FTIR spectra have been used to confirmed the Si-O, Si-O-Si bond and the adsorption on the surface of PS nanoparticles. The formation of pores on the c-Si wafer results in an analysis of a photoluminescence (PL) band at 712 nm, which changes with etching time in a process similar to current density. The correlation exist among etching times and the ideality factor (η) and barrier height (фb). Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria showed enhanced antimicrobial activity against the PS nanoparticles. The synthesized of PS has been shown with good electrical and antimicrobial activities.

Preparation of coated MgFe layered double hydroxide nanoparticles on cement kiln dust and intercalated with sodium dodecyl sulfate as an intermediate layer for the adsorption of estrogen from water

Estrogenic hormones, found as micropollutants in water systems, give rise to grave concerns for human health and marine ecosystems, triggering a cascade of adverse effects. This research presents an innovative manufacturing approach using nanoscale layered double hydroxides of magnesium and iron, with sodium dodecyl sulfate surfactant, to create highly efficient sorbent cement kiln dust (CKD) based beads (CKD/MgFe-SDS-LDH-beads). These beads effectively remove estrone from water. Optimization of the preparation process considered factors like molar Mg/Fe ratio, CKD dosage, pH, and SDS dosage using Response Surface Methodology (RSM). The adsorption process was well-characterized by Langmuir isotherm and pseudo-second-order kinetic models, demonstrating a remarkable 6.491 mg/g sorption capacity. Results proved that the calcite was the main component of the CKD with miners of dolomite, and quartz. Adsorption capacity, surface charges, and the availability of vacant sites may be the main mechanisms responsible of removal process. Experimental tests confirmed the beads' potential for estrone removal, aligning with the Bohart-Adams and Thomas-BDST models. This study introduces a promising, eco-friendly solution for addressing water contamination challenges.

Kinetic and equilibrium study of graphene and copper oxides modified nanocomposites for metal ions adsorption from binary metal aqueous solution

Presently, the main cause of pollution of natural water resources is heavy metal ions. The removal of metal ions such as nickel (Ni2+) and cadmium (Cd2+) has been given considerable attention due to their health and environmental risks. In this regard, for wastewater treatment containing heavy metal ions, graphene oxide (GO) nanocomposites with metal oxide nanoparticles (NPs) attained significant importance. In this study, graphene oxide stacked with copper oxide nanocomposites (GO/CuO-NCs) were synthesized and characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and atomic force microscopy (AFM) analytical procedures. The prepared GO/CuO-NCs were applied for the removal of Ni2+ and Cd2+ ions from a binary metal ion system in batch and continuous experiments. The obtained results revealed that GO/CuO-NCs exhibited the highest removal efficiencies of Ni2+ (89.60% ± 2.12%) and Cd2+ (97.10% ± 1.91%) at the optimum values of pH: 8, dose: 0.25 g, contact time: 60 min, and at 50 ppm initial metal ion concentration in a batch study. However, 4 mL/min flow rate, 50 ppm initial concentration, and 2 cm bed height were proved to be the suitable conditions for metal ion adsorption in the column study. The kinetic adsorption data exhibited the best fitting with the pseudo-second-order model. The adsorption isotherm provided the best-fitting data in the Langmuir isotherm model. This study suggested that the GO/CuO nanocomposites have proved to be efficient adsorbents for Ni2+ and Cd2+ ions from a binary metal system.

Polymer Backbone Stabilized Methylammonium Lead Bromide Perovskite Nano Islands

Organic-inorganic hybrid perovskite materials continue to attract significant interest due to their optoelectronic application. However, the degradation phenomenon associated with hybrid structures remains a challenging aspect of commercialization. To overcome the stability issue, we have assembled the methylammonium lead bromide nano islands (MNIs) on the backbone of poly-3-dodecyl-thiophene (PDT) for the first time. The structural and morphological properties of the MNI-PDT composite were confirmed with the aid of X-ray diffraction (XRD) studies, Field emission scanning electron microscope (FESEM), and X-ray photoelectron spectroscopy (XPS). The optical properties, namely absorption studies, were carried out by ultraviolet-visible spectroscopy. The fluorescent behavior is determined by photoluminescence (PL) spectroscopy. The emission peak for the MNI-PDT was observed at 536 nm. The morphology studies supported by FESEM indicated that the nano islands are completely covered on the surface of the polymer backbone, making the hybrid (MNI-PDT) stable under environmental conditions for three months. The interfacial interaction strategy developed in the present work will provide a new approach for the stabilization of hybrids for a longer time duration.

Morphology Controlled Deposition of Vanadium Oxide (VOx) Nanoparticles on the Surface of Highly Reduced Graphene Oxide for the Photocatalytic Degradation of Hazardous Organic Dyes

Semiconducting nanomaterials based heterogeneous photocatalysis represent a low-cost, versatile technique for environmental remediation, including pollution mitigation, energy management and other environmental aspects. Herein, we demonstrate the syntheses of various heterogeneous photocatalysts based on highly reduced graphene oxide (HRG) and vanadium oxide (VOx)-based nanocomposites (HRG-VOx). Different shapes (rod, sheet and urchin forms) of VOx nanoparticles were successfully fabricated on the surface of HRG under solvo-/hydrothermal conditions by varying the amount of water and ethanol. The high concentration of water in the mixture resulted in the formation of rod-shaped VOx nanoparticles, whereas increasing the amount of ethanol led to the production of VOx sheets. The solvothermal condition using pure ethanol as solvent produced VOx nano-urchins on the surface of HRG. The as-prepared hybrid materials were characterized using various spectroscopic and microscopic techniques, including X-ray diffraction, UV-vis, FTIR, SEM and TEM analyses. The photocatalytic activities of different HRG-VOx nanocomposites were investigated for the photodegradation of methylene blue (MB) and methyl orange (MO). The experimental data revealed that all HRG-VOx composite-based photocatalysts demonstrated excellent performance toward the photocatalytic degradation of the organic dyes. Among all photocatalysts studied, the HRG-VOx nanocomposite consisting of urchin-shaped VOx nanoparticles (HRG-VOx-U) demonstrated superior photocatalytic properties towards the degradation of dyes.

Microstructure and Oxygen Evolution Property of Prussian Blue Analogs Prepared by Mechanical Grinding

Solvent-free mechanochemical synthesis of efficient and low-cost double perovskite (DP), like a cage of Prussian blue (PB) and PB analogs (PBAs), is a promising approach for different applications such as chemical sensing, energy storage, and conversion. Although the solvent-free mechanochemical grinding approach has been extensively used to create halide-based perovskites, no such reports have been made for cyanide-based double perovskites. Herein, an innovative solvent-free mechanochemical synthetic strategy is demonstrated for synthesizing Fe4[Fe(CN)6]3, Co3[Fe(CN)6]2, and Ni2[Fe(CN)6], where defect sites such as carbon-nitrogen vacancies are inherently introduced during the synthesis. Among all the synthesized PB analogs, the Ni analog manifests a considerable electrocatalytic oxygen evolution reaction (OER) with a low overpotential of 288 mV to obtain the current benchmark density of 20 mA cm-2. We hypothesize that incorporating defects, such as carbon-nitrogen vacancies, and synergistic effects contribute to high catalytic activity. Our findings pave the way for an easy and inexpensive large-scale production of earth-abundant non-toxic electrocatalysts with vacancy-mediated defects for oxygen evolution reaction.

Effectiveness of Nonfunctionalized Graphene Oxide Nanolayers as Nanomedicine against Colon, Cervical, and Breast Cancer Cells

Recent studies in nanomedicine have intensively explored the prospective applications of surface-tailored graphene oxide (GO) as anticancer entity. However, the efficacy of nonfunctionalized graphene oxide nanolayers (GRO-NLs) as an anticancer agent is less explored. In this study, we report the synthesis of GRO-NLs and their in vitro anticancer potential in breast (MCF-7), colon (HT-29), and cervical (HeLa) cancer cells. GRO-NLs-treated HT-29, HeLa, and MCF-7 cells showed cytotoxicity in the MTT and NRU assays via defects in mitochondrial functions and lysosomal activity. HT-29, HeLa, and MCF-7 cells treated with GRO-NLs exhibited substantial elevations in ROS, disturbances of the mitochondrial membrane potential, an influx of Ca²⁺, and apoptosis. The qPCR quantification showed the upregulation of caspase 3, caspase 9, bax, and SOD1 genes in GRO-NLs-treated cells. Western blotting showed the depletion of P21, P53, and CDC25C proteins in the above cancer cell lines after GRO-NLs treatment, indicating its function as a mutagen to induce mutation in the P53 gene, thereby affecting P53 protein and downstream effectors P21 and CDC25C. In addition, there may be a mechanism other than P53 mutation that controls P53 dysfunction. We conclude that nonfunctionalized GRO-NLs exhibit prospective biomedical application as a putative anticancer entity against colon, cervical, and breast cancers.

Surface-coated magnetic nanostructured materials for robust bio-catalysis and biomedical applications-A review

BACKGROUND

Enzymes based bio-catalysis has wide range of applications in various chemical and biological processes. Thus, the process of enzymes immobilization on suitable support to obtain highly active and stable bio-catalysts has great potential in industrial applications. Particularly, surface-modified magnetic nanomaterials have garnered a special interest as versatile platforms for biomolecules/enzyme immobilization.

AIM OF REVIEW

This review spotlights recent progress in the immobilization of various enzymes onto surface-coated multifunctional magnetic nanostructured materials and their derived nano-constructs for multiple applications. Conclusive remarks, technical challenges, and insightful opinions on this field of research which are helpful to expand the application prospects of these materials are also given with suitable examples.

KEY SCIENTIFIC CONCEPTS OF REVIEW

Nanostructured materials, including surface-coated magnetic nanoparticles have recently gained immense significance as suitable support materials for enzyme immobilization, due to their large surface area, unique functionalities, and high chemical and mechanical stability. Besides, magnetic nanoparticles are less expensive and offers great potential in industrial applications due to their easy recovery and separation form their enzyme conjugates with an external magnetic field. Magnetic nanoparticles based biocatalytic systems offer a wide-working temperature, pH range, increased storage and thermal stabilities. So far, several studies have documented the application of a variety of surface modification and functionalization techniques to circumvent the aggregation and oxidation of magnetic nanoparticles. Surface engineering of magnetic nanoparticles (MNPs) helps to improve the dispersion stability, enhance mechanical and physicochemical properties, upgrade the surface activity and also increases enzyme immobilization capabilities and biocompatibility of the materials. However, several challenges still need to be addressed, such as controlled synthesis of MNPs and clinical aspects of these materials require consistent research from multidisciplinary scientists to realize its practical applications.

Environmental photochemistry with Sn/F simultaneously doped TiO2 nanoparticles: UV and visible light induced degradation of thiazine dye

Environmental route such as degradation of toxic dyes can be improved through photochemical activity such as light driven photocatalytic degradation. Herein, fluorine and tin simultaneously doped TiO₂ nanoparticles were synthesized and characterized. The formation of anatase phase in synthesized samples and the reduction in the crystallite size of doped TiO₂ was confirmed from XRD results. The existence of O-Ti-O stretching vibration in pure and co-doped TiO₂ confirmed from FTIR results. Optical studies reveal that the band gap of co-doped TiO₂ is increased and hence it was concluded that the particle size of co-doped TiO₂ is reduced compared with as-synthesized TiO₂. The morphologies of TiO₂ changed significantly with doping of fluorine and tin. It reveals majority of the particles are hexagons, pentagons and ellipse shaped and some of them are spheres with a mean particle size of 31.17 nm. PL studies showed the reduction in intensity for Sn-F/TiO₂ accredited to the lesser recombination rate of electron-hole pair under UV light irradiation. Thus tin and fluorine doped TiO₂ could be considered as a good candidate for photocatalytic activity. The photocatalytic activity of TiO₂ and Sn-F/TiO₂ nanoparticles was analyzed separately through the degradation of methylene blue (MB) under visible and UV light irradiation. The use of Sn and F ions in the synthesis of TiO₂ are revealed not only create small sized nanoparticles but these water soluble nanoparticles have very good antibacterial and antifungal action by inhibiting the growth of bacteria and fungus.

Green Synthesized ZnO Nanoparticles as Biodiesel Blends and Their Effect on the Performance and Emission of Greenhouse Gases

Pollution and global warming are a few of the many reasons for environmental problems, due to industrial wastes and greenhouse gases, hence there are efforts to bring down such emissions to reduce pollution and combat global warming. In the present study, zinc oxide nanoparticles are green synthesized using cow dung as fuel, through combustion. Synthesized material was characterized by FTIR, XRD, UV, and FESEM. The as-prepared ZnO-GS NPs were employed as a transesterification catalyst for the preparation of biodiesel from discarded cooking oil. The biodiesel obtained is termed D-COME (discarded cooking oil methyl ester), which is blended with 20% commercial diesel (B20). Additionally, this blend, i.e., B20, is further blended with varying amounts of as-prepared ZnO-GS NPs, in order to ascertain its effects on the quality of emissions of various greenhouse gases such as hydrocarbons, CO_x, NO_x. Moreover, the brake thermal efficiency (BTHE) and brake specific fuel consumption (BSFC) were studied for their blends. The blend (B20) with 30 mg of ZnO-GS, i.e., B20-30, displays the best performance and reduced emissions. Comparative studies revealed that the ZnO-GS NPs are as efficient as the ZnO-C NPs, indicating that the green synthetic approach employed does not affect the efficiency of the ZnO NPs.

Pyrene Functionalized Highly Reduced Graphene Oxide-palladium Nanocomposite: A Novel Catalyst for the Mizoroki-Heck Reaction in Water

The formation of a C-C bond through Mizoroki-Heck cross-coupling reactions in water with efficient heterogeneous catalysts is a challenging task. In this current study, a highly reduced graphene oxide (HRG) immobilized palladium (Pd) nanoparticle based catalyst (HRG-Py-Pd) is used to catalyze Mizoroki-Heck cross-coupling reactions in water. During the preparation of the catalyst, amino pyrene is used as a smart functionalizing ligand, which offered chemically specific binding sites for the effective and homogeneous nucleation of Pd NPs on the surface of HRG, which significantly enhanced the physical stability and dispersibility of the resulting catalyst in an aqueous medium. Microscopic analysis of the catalyst revealed a uniform distribution of ultrafine Pd NPs on a solid support. The catalytic properties of HRG-Py-Pd are tested towards the Mizoroki-Heck cross-coupling reactions of various aryl halides with acrylic acid in an aqueous medium. Furthermore, the catalytic efficacy of HRG-Py-Pd is also compared with its non-functionalized counterparts such as HRG-Pd and pristine Pd NPs (Pd-NPs). Using the HRG-Py-Pd nanocatalyst, the highest conversion of 99% is achieved in the coupling reaction of 4-bromoanisol and acrylic acid in an aqueous solution in a relatively short period of time (3 h), with less quantity of catalyst (3 mg). Comparatively, pristine Pd NPs delivered lower conversion (∼92%) for the same reaction required a long reaction time and a large amount of catalyst (5.3 mg). Indeed, the conversion of the reaction further decreased to just 40% when 3 mg of Pd-NPs was used which was sufficient to produce 99% conversion in the case of HRG-Py-Pd. On the other hand, HRG-Pd did not deliver any conversion and was ineffective even after using a high amount of catalyst and a longer reaction time. The inability of the HRG-Pd to promote coupling reactions can be attributed to the agglomeration of Pd NPs which reduced the dispersion quality of the catalyst in water. Therefore, the high aqueous stability of HRG-Py-Pd due to smart functionalization can be utilized to perform other organic transformations in water which was otherwise not possible.

Electrocatalytic detection of noxious antioxidant diphenylamine in fruit samples with support of Cu@nanoporous carbon modified sensor

Herein, the facile synthesis of copper(II) and benzene-1,3,5-tricarboxylate (Cu-BTC) and copper nanoporous carbon (Cu@NPC) for the electrochemical detection of diphenylamine (DPA) was systematically investigated. The Cu-BTC and Cu@NPC materials structural, morphological, and thermal stability were evaluated and confirmed using FE-SEM, HR-TEM, XRD, FT-IR, and TGA. The electrocatalytic behavior of sensor materials was examined by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). It is presumed that the structural stability and synergic effect exhibited in Cu@NPC are favorable for enhanced sensitivity and selectivity towards the detection of DPA. The Cu@NPC exhibited a wide linear range (0.09-396.82 μM) and the lowest limit of detection (5 nM). Furthermore, the real sample analysis of the sensor for the detection of DPA in apples and pears confirms its potential capability in practical application.

Biocatalytic degradation of organophosphate pesticide from the wastewater and hydrolytic enzyme properties of consortium isolated from the pesticide contaminated water

The indiscriminate application of various pesticides leads to toxicity to the humans, animals, fishes and threatens the environment and ecosystem. The present study was aimed to investigate pesticide degrading bacteria from the pesticide contaminated sample and to localize organophophate hydrolase activity from the bacteria. Sediment sample was selected as the source of microorganism for the degradation of chlorpyrifos. Enterobacter aerogenes CP2 and Streptococcus pyogenes CP11 isolated from the contaminated sample removed 77 ± 1.8%, 74.2 ± 3.1 chlorpyrifos. These strains have the potential to utilize pesticide as the source of carbon and energy. The pesticides inoculated with both CP 2 and CP 11 enhanced biodegradation of chlorpyrifos at optimized condition. E. aerogenes CP2 and S. pyogenes CP11 produced organophosphate hydrolase activity and localized enzyme biosynthesis. Organophosphate hydrolase activity was high in intracellular, followed by outer membrane and extracellular sample for both bacteria. The treated wastewater has no impact on the seed germination indicated normal cell division, cell elongation and indole-3 acetic acid synthesis. The strain CP2 has the rapid rate of organophosphate degradation among Enterobacter species.

Reinforcing the tetracene-based two-dimensional C48H16 sheet by decorating the Li, Na, and K atoms for hydrogen storage and environmental application -A DFT study

To meet the increasing need of energy resources, hydrogen (H₂) is being considered as a promising candidate for energy carrier that has motivated research into appropriate storage materials among scientists. Thus, in this study for the first time, zig-zag and armchair edged tetracene based porous carbon sheet (C₄₈H₁₆) is investigated for H₂ storage using the density functional theory. To explore the hydrogen storage capacity, the hydrogen molecule is initially positioned parallel to the C₄₈H₁₆ sheet at three different sites, resulting in lower adsorption energies of -0.020, -0.024, and -0.015 eV respectively. The Li, Na, and K atoms are decorated to improve H₂ adsorption on the C₄₈H₁₆ sheet. The Li atom decorated C₄₈H₁₆ sheet has a higher binding energy value of -2.070 eV than the Na and K atom decorated C₄₈H₁₆ sheet. The presence of Li, Na, and K atoms on the C₄₈H₁₆ sheet enhance the H₂ adsorption energy than the H₂ on the pristine C₄₈H₁₆ sheet. The decrease of Mulliken charge in alkali metal atoms (Li, Na, and K atom) on the C₄₈H₁₆ sheet reveal that the electron is transferred from H-σ orbital to s orbital of alkali metal atoms on the C₄₈H₁₆ sheet, leads to the enhancement of H₂ binding. Compared to H₂ adsorption on Na and K atom decorated C₄₈H₁₆ sheet, the H₂ adsorption on Li atom decorated C₄₈H₁₆ sheet has the maximum adsorption energy value of -0.389 eV. The obtained hydrogen storage capacity of Li, Na, and K atoms decorated C₄₈H₁₆ sheets are about 7.49 wt%, 7.31 wt%, and 7.14 wt% respectively for four H₂ molecules, which is greater than the targeted hydrogen storage capacity of the United States Department of Energy (DOE). Thus the obtained results in this work reveal that the decorated C₄₈H₁₆ sheets with Li, Na, and K atom plays the potential role in the H₂ storage.

Knowledge extraction of sonophotocatalytic treatment for acid blue 113 dye removal by artificial neural networks

Removing decolorizing acid blue 113 (AB113) dye from textile wastewater is challenging due to its high stability and resistance to removal. In this study, we used an artificial neural network (ANN) model to estimate the effect of five different variables on AB113 dye removal in the sonophotocatalytic process. The five variables considered were reaction time (5-25 min), pH (3-11), ZnO dosage (0.2-1.0 g/L), ultrasonic power (100-300 W/L), and persulphate dosage (0.2-3 mmol/L). The most effective model had a 5-7-1 architecture, with an average deviation of 0.44 and R² of 0.99. A sensitivity analysis was used to analyze the impact of different process variables on removal efficiency and to identify the most effective variable settings for maximum dye removal. Then, an imaginary sonophotocatalytic system was created to measure the quantitative impact of other process parameters on AB113 dye removal. The optimum process parameters for maximum AB 113 removal were identified as 6.2 pH, 25 min reaction time, 300 W/L ultrasonic power, 1.0 g/L ZnO dosage, and 2.54 mmol/L persulfate dosage. The model created was able to identify trends in dye removal and can contribute to future experiments.

Photocatalytic Degradation of Cefixime Trihydrate by Bismuth Ferrite Nanoparticles

The present work was carried out to synthesize bismuth ferrite (BFO) nanoparticles by combustion synthesis, and to evaluate the photocatalytic activity of synthesized bismuth ferrite nanoparticles against cefixime trihydrate. BFO nanoparticles were successfully synthesized using bismuth (III) nitrate and iron (III) nitrate by a combustion synthesis method employing different types of fuels such as maltose, succinic acid, cinnamic acid, and lactose. The effects of the different types of fuels on the morphology and size of the bismuth ferrite nanoparticles were investigated. Characterization of the as-obtained bismuth ferrite nanoparticles was carried out by different techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy-Dispersive Spectroscopy (EDS), N₂-sorption analysis, Fourier-transform infrared spectroscopy (FT-IR), and ultraviolet-visible (UV-vis) spectroscopy. Photoluminescence studies were also carried out for the various bismuth ferrite nanoparticles obtained. Degradation of cefixime trihydrate was investigated under sunlight to evaluate the photocatalytic properties of the bismuth ferrite nanoparticles, and it was found that the bismuth ferrite nanoparticles followed first-order degradation kinetics in solar irradiation in the degradation of antibiotic, cefixime trihydrate.

Nanotextured Soft Electrothermo-Pneumatic Actuator for Constructing Lightweight, Integrated, and Untethered Soft Robotics

In this study, we fabricated a nanofiber-based electrothermo-pneumatic soft actuator (ETPSA) using electrospinning technique. The actuator uses liquid-vapor phase transition. The ETPSA developed in the present study goes beyond the limitations of the existing pneumatic soft actuators. The present ETPSA has a built-in source of heat (Joule heating from an embedded metal wire) and allows the smooth anthropomorphic movement of the actuator and, in particular, eliminates the use of external pumping systems that are indispensable in the existing pneumatic soft actuators and robots. In addition, since the present ETPSA can be operated effectively even using a portable miniature battery, it holds great promise as an adaptable soft actuator for various robotic applications with high energy efficiency and programmable motions.

Sol-Gel Synthesis of Dy-Substituted Ni0.4Cu0.2Zn0.4(Fe2-xDyx)O4 Nano Spinel Ferrites and Evaluation of Their Antibacterial, Antifungal, Antibiofilm and Anticancer Potentialities for Biomedical Application

Background

The constant rise of microbial biofilm formation and drug resistance to existing antimicrobial drugs poses a significant threat to community health around the world because it reduces the efficacy and efficiency of treatments, increasing morbidity, mortality, and health-care expenditures. As a result, there is an urgent need to develop novel antimicrobial agents that inhibit microbial biofilm formation.

Methods

The [Ni_0.4Cu_0.2Zn_0.4](Fe_2-xDy_x)O₄(x≤0.04) (Ni-Cu-Zn) nano spinel ferrites (NSFs) have been synthesized by the sol–gel auto-combustion process and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-ray (EDX) and transmission electron microscopy (TEM). The antimicrobial, antibiofilm and antiproliferative activities of Ni-Cu-Zn NSFs were also examined.

Results

The XRD pattern confirms the secondary phase DyFeO₃ and Fe₂O₃ for substituted Dy³⁺ samples, and the crystallite size ranged from 10 to 19 nm. TEM analysis of NSFs revealed that the particles were cube-shaped and 15nm in size. NSFs exhibited significant antimicrobial, antibiofilm and antiproliferative activity. At concentration of 1 mg/mL, it was found that the NSFs (ie, x=0.0, x=0.01, x=0.02, x=0.03 and x=0.04) inhibit biofilm formation by 27.6, 26.2, 58.5, 33.3 and 25% for methicillin-resistant Staphylococcus aureus (MRSA) and 47.5, 43.5, 48.6, 58.3 and 26.6% for Candida albicans, respectively. SEM images demonstrate that treating MRSA and C. albicans biofilms with NSFs significantly reduces cell adhesion, colonization and destruction of biofilm architecture and extracellular polymeric substances matrices. Additionally, SEM and TEM examination revealed that NSFs extensively damaged the cell walls and membranes of MRSA and C. albicans. Huge ultrastructural alteration such as deformation, disintegration and separation of cell wall and membrane from the cells was observed, indicating significant loss of membrane integrity, which eventually led to cell death. Furthermore, it was observed that NSF inhibited the cancer cell growth and proliferation of HCT-116 in a dose-dependent manner.

Conclusion

The current study demonstrated that the synthesized Ni-Cu-Zn NSFs could be used to develop potential antimicrobial surface coatings agents for a varieties of biomedical-related materials and devices in order to prevent the biofilms formation and their colonization. Furthermore, the enhanced antiproliferative properties of manufactured SNFs suggest a wide range of biomedical applications.

Enhanced Apoptosis by Functionalized Highly Reduced Graphene Oxide and Gold Nanocomposites in MCF-7 Breast Cancer Cells

Graphene nanocomposites have gained significant interest in a variety of biological applications due to their unique properties. Herein, we have studied the apoptosis-inducing ability and anticancer properties of functionalized highly reduced graphene oxide (HRG) and gold nanoparticles (Au NPs)-based nanocomposites (AP-HRG-Au). Samples were prepared under facile conditions via simple stirring and ultrasonication. All the samples were tested for their anticancer properties against different human cancer cell lines including lung (A549), liver (HepG2), and breast (MCF-7) cancer cells using doxorubicin as a positive control. In order to enhance the solubility and bioavailability of the sample, HRG was functionalized with 1-aminopyrene (1-AP) as a stabilizing ligand. The ligand also facilitated the homogeneous growth of Au NPs on the surface of HRG by offering chemically specific binding sites. The synthesis of nanocomposites and the surface functionalization of HRG were confirmed by UV-Vis, powder X-ray diffraction, and Fourier transform infrared spectroscopy. The structure and morphology of the as-prepared nanocomposites were established by high-resolution transmission electron microscopy. Because of the functionalization, the AP-HRG-Au nanocomposite exhibited enhanced physical stability and high dispersibility. A comparative anticancer study of pristine HRG, nonfunctionalized HRG-Au, and 1-AP-functionalized AP-HRG-Au nanocomposites revealed the enhanced apoptosis ability of functionalized nanocomposites compared to the nonfunctionalized sample, whereas the pristine HRG did not show any anticancer ability against all tested cell lines. Both HRG-Au and AP-HRG-Au have induced a concentration-dependent reduction in cell viability in all tested cell lines after 48 h of exposure, with a significantly higher response in MCF-7 cells compared to the remaining cells. Therefore, MCF-7 cells were selected to perform detailed investigations using apoptosis assay, cell cycle analysis, and reactive oxygen species measurements. These results suggest that AP-HRG-Au induces enhanced apoptosis in human breast cancer cells.