Processing Method for the Quantification of Methanol and Ethanol from Bioreactor Samples Using Gas Chromatography-Flame Ionization Detection

Interfacial Electronic Interactions within the Pd-CeO2/Carbon Onions Define the Efficient Electrocatalytic Ethanol Oxidation Reaction in Alkaline Electrolytes

Porous Pd-based electrocatalysts are promising materials for alkaline direct ethanol fuel cells (ADEFCs) and ethanol sensors in the development of renewable energy and point-of-contact ethanol sensor test kits for drunk drivers. However, experimental and theoretical investigations of the interfacial interaction among Pd nanocrystals on supports (i.e., carbon black (CB), onion-like carbon (OLC), and CeO2/OLC) toward ADEFC and ethanol sensors are not yet reported. This is based on the preparation of Pd-CeO2/OLC nanocrystals by the sol-gel and impregnation methods. Evidently, the porous Pd-CeO2/OLC significantly increased membrane-free micro-3D-printed ADEFC performance with a high peak power density (Pmax = 27.15 mW cm-2) that is 1.38- and 7.58-times those of Pd/OLC (19.72 mW cm-2) and Pd/CB (3.59 mW cm-2), besides its excellent stability for 48 h. This is due to the excellent interfacial interaction among Pd, CeO2, and OLC, evidenced by density functional theory (DFT) simulations that showed a modulated Pd d-band center and facile active oxygenated species formation by the CeO2 needed for ethanol fuel cells. Similarly, Pd-CeO2/OLC gives excellent sensitivity (0.00024 mA mM-1) and limit of detection (LoD = 8.7 mM) for ethanol sensing and satisfactory recoveries (89-108%) in commercial alcoholic beverages (i.e., human serum, Amstel beer, and Nederberg Wine). This study shows the excellent possibility of utilizing Pd-CeO2/OLC for future applications in fuel cells and alcohol sensors.

Macroscopic modeling of the growth and substrate consumption of wild type and genetically modified Pichia pastoris

Pichia pastoris is a popular yeast platform to generate several industrially relevant products which have applications in a wide range of sectors. The complexities in the processes due to the addition of a foreign gene are not widely explored. Since these complexities can be dependent on the strain characteristics, promoter, and type of protein produced, it is vital to investigate the growth and substrate consumption patterns of the host to facilitate customized process optimization. In this study, the growth rates of P. pastoris GS115 wild type (WT) and genetically modified (GM) strains grown on glycerol and methanol in batch cultivation mode were estimated and the model providing the best representation of the true growth kinetics based on substrate consumption was identified. It was observed that the growth of P. pastoris exhibits Haldane kinetics on glycerol rather than the most commonly used Monod kinetics due to the inability of the latter to describe growth inhibition at high concentrations of glycerol. Whereas, the cardinal parameter model, a newly proposed model for this application, was found to be the best fitting to describe the growth of P. pastoris on methanol due to its ability to describe methanol toxicity. Interestingly, the findings from this study concluded that in both substrates, the genetically engineered strain exhibited a higher growth rate compared to the WT strain. Such an observation has not been established yet in other published works, indicating an opportunity to further optimize the carbon source feeding strategies when the host is grown in fed-batch mode.

Genetic and Physiological Probing of Cytoplasmic Bypasses for the Energy-Converting Methyltransferase Mtr in Methanosarcina acetivorans

Methanogenesis is a unique energy metabolism carried out by members of the domain Archaea. Unlike most other methanogens, which reduce CO2 to methane with hydrogen as the electron donor, Methanosarcina acetivorans is able to grow on methylated compounds, on acetate, and on carbon monoxide (CO). These substrates are metabolized via distinct yet overlapping pathways. For the use of any single methanogenic substrate, the membrane-integral, energy-converting N5-methyl-tetrahydrosarcinapterin (H4SPT):coenzyme M (HS-CoM) methyltransferase (Mtr) is required. It was proposed that M. acetivorans can bypass the methyl transfer catalyzed by Mtr via cytoplasmic activities. To address this issue, conversion of different energy substrates by an mtr deletion mutant was analyzed. No significant methyl transfer from H4SPT to HS-CoM could be detected with CO as the electron donor. In contrast, formation of methane and CO2 in the presence of methanol or trimethylamine was indicative of an Mtr bypass in the oxidative direction. As methane thiol and dimethyl sulfide were transiently produced during methylotrophic methanogenesis in the mtr mutant, involvement in this process of methyl sulfide-dependent methyltransferases (Mts) was analyzed in a strain lacking both the Mts system and Mtr. It could be unequivocally demonstrated that the Mts system is not involved in bypassing Mtr, thereby ruling out previous proposals. Conversion of [13C]methanol indicated that in the absence of Mtr M. acetivorans provides the reducing equivalents for methyl-S-CoM reduction to methane by oxidizing (an) intracellular compound(s) to CO2 rather than disproportioning the source of methyl groups. Thus, no in vivo Mtr bypass appears to exist in M. acetivorans. IMPORTANCE Methanogenic archaea possess only a limited number of chemiosmotic coupling sites in their respiratory chains. Among them, N5-methyl-H4SPT:HS-CoM methyltransferase (Mtr) is the most widely distributed. Previous observations led to the conclusion that Methanosarcina acetivorans is able to bypass this reaction via methyl sulfide-dependent methyltransferases (Mts). However, strains lacking Mtr are not able to produce methane from CO. Also, these strains are unable to oxidize methylated substrates to CO2, in contrast to observations in the close relative Methanosarcina barkeri. The results also highlight the sole function of the Mts system in methyl sulfide metabolism. Thus, no in vivo Mtr bypass appears to exist in M. acetivorans.

A conductometric enzymatic methanol sensor based on polystyrene - PAMAM dendritic polymer electrospun nanofibers

Methanol (MeOH) is a solvent and cleaning agent used in industry, but it is poisonous when ingested. The recommended release threshold for MeOH vapor is 200 ppm. We present a novel sensitive micro-conductometric MeOH biosensor created by grafting alcohol oxidase (AOX) onto electrospun polystyrene-poly(amidoamine) dendritic polymer blend nanofibers (PS-PAMAM-ESNFs) on interdigitated electrodes (IDEs). The analytical performance of the MeOH microsensor was evaluated using gaseous MeOH, ethanol, and acetone samples collected from the headspace above aqueous solution with known concentration. The sensor's response time (t_Res) fluctuates from 13 s to 35 s from lower to higher concentrations. The conductometric sensor has a sensitivity of 150.53 μS.cm-1 (v/v) for MeOH and a detection limit of 100 ppm in the gas phase. The MeOH sensor is 7.3 times less sensitive to ethanol and 136.8 times less sensitive to acetone. The sensor was verified for detecting MeOH in commercial rubbing alcohol samples.