Biological Degradation and Transformation Characteristics of Total Petroleum Hydrocarbons by Oil Degradation Bacteria Adsorbed on Modified Straw

Recycled Anode Materials from Manufacturing Industry for Anion Exchange Membrane Water Electrolyzer

As the energy industries, such as secondary batteries and fuel cells, expand rapidly, the demand for transition metals used as electrode materials is increasing, which has led to a rise in their prices. One promising strategy to address these challenges is upcycling, which involves recycling transition metal-based waste from various industries. In this study, a heterostructure electrocatalyst for anion exchange membrane water electrolysis is developed by upcycling iron-based waste from the automotive industry. The iron-based swarf is converted into single-phase Fe2O3 by removing surface impurities through calcination in air. Subsequently, NiFe-LDH is formed via sequential hydrothermal synthesis, resulting in NiFe-LDH/Fe2O3 heterostructured electrocatalysts. The hetero-interface between NiFe-LDH and Fe2O3 significantly reduced the electrochemical activation barrier, enhancing oxygen evolution reaction (OER) activity and, furthermore, achieving high-performance AEMWE. This approach not only reduces waste but also provides a cost-effective alternative to traditional materials, highlighting the potential for sustainable and efficient energy solutions.

Microorganisms immobilized hydroxyethyl cellulose/luffa composite sponge for selective adsorption and biodegradation of oils in wastewater

The highly efficient removal of oils such as oils or dyes from wastewater has aroused wide concern and is of great significance for clean production and environmental remediation. The synthesis of a novel aerogel (designated as HEC/LS) is reported herein, achieved through a sol-gel method followed by freeze-drying utilizing loofa and hydroxyethyl cellulose as the raw materials. The new HEC/LS aerogel exhibits excellent porosity and specific surface area, with a porosity of 88.70 %, a total pore area of 0.607 m2 g-1, and a specific surface area of 230 m2 g-1. The prepared HEC/LS aerogel exhibits exceptional hydrophilicity and self-floatability, facilitating its rapid absorption of water up to 21 times its own weight within a mere 3 s. Additionally, it demonstrates good adsorption performance for methylene blue (MB), with a maximum adsorption capacity of 83.30 mg g-1. Subsequently, a new hydrophobic microorganisms-loaded composite aerogel (namely, Bn-HEC/LS) was obtained by doping microorganisms into the as-prepared HEC/LS in multiple enrichment followed by a hydrophobic and oleophilic surface modification. Based on its rich porous structure and oleophilic wettability, the as-synthesized Bn-HEC/LS exhibits excellent selective adsorption and degradation properties for the oil contamination, the diesel oil could be selectively absorbed in the Bn-HEC/LS and degraded by the loaded microorganisms. Among them, B5-HEC/LS displays the highest removal efficiency of 94.50 % within 180 h, while free microorganisms and HEC/LS aerogels show degradation efficiencies of only 21.70 % and 48.10 %, respectively. The fixation of microorganisms in the aerogel increases their number within the material and enhances the relative microorganisms removal capacity. The hydrophobic and lipophilic modifications improve the selective adsorption performance of the aerogel on diesel oil, resulting in a significantly high removal rate of Bn-HEC/LS for diesel oil. The results indicate that the immobilization of microorganisms into aerogel improves the activity of microorganisms, and the hydrophobic and oleophilic modification enhances the selective adsorption performance of aerogel to diesel oil, thus resulting in a very high removal rate of Bn-HEC/LS for diesel oil. This study is expected to provide a now possibility for the green and efficient bioremediation of oils.

Preparation of Newly Polymer-Coated Microbial Pellets and Their Adsorption and Degradation Properties for Oil-Containing Wastewater

Water is the lifeblood of everything on earth, nourishing and nurturing all forms of life, while also contributing to the development of civilization. However, with the rapid development of economic construction, especially the accelerated process of modern industrialization, the pollution of oily sewage is becoming increasingly serious, affecting the ecological balance and human health. The efficient elimination of pollutants in sewage is, therefore, particularly urgent. In this paper, a core-shell microbial reactor (MPFA@CNF-SA-AM) was fabricated by using nanocellulose and sodium alginate (SA) particles embedded with microorganisms as the core and lipophilic and hydrophobic fly ash as the outer shell layer. Compared with that of free microorganisms and cellulose and SA aerogel pellets loading with microorganisms (CNF-SA-AM), which has a degradation efficiency of 60.69 and 82.89%, respectively, the MPFA@CNF-SA-AM possesses a highest degradation efficiency of 90.60% within 240 h. So that this self-floating microbial reactor has selective adsorption properties to achieve oil-water separation in oily wastewater and high effective degradation of organic pollutants with low cost. The adsorption curves of MPFA@CNF-SA-AM for diesel and n-hexadecane were studied. The results showed that the adsorption follows the Freundlich model and is a multimolecular layer of physical adsorption. In addition, the degradation mechanism of diesel oil was studied by gas chromatography-mass spectrometry. The results showed that diesel oil was selectively adsorbed to the interior of MPFA@CNF-SA-AM, and it was degraded by enzymes in microorganisms into n-hexadecanol, n-hexadecaldehyde, and n-hexadecanoic acid in turn, and finally converted to water and carbon dioxide. Compared with existing oily wastewater treatment methods, this green and pollution-free dual-functional core-shell microbial reactor has the characteristics of easy preparation, high efficiency, flexibility, and large-scale degradation. It provides a new, effective green choice for oily wastewater purification and on-site oil spill accidents.

Remediation potential of an immobilized microbial consortium with corn straw as a carrier in polycyclic aromatic hydrocarbons contaminated soil

Polycyclic aromatic hydrocarbons (PAHs) are widespread in soils and threaten human health seriously. The immobilized microorganisms (IM) technique is an effective and environmentally sound approach for remediating PAH-contaminated soil. However, the knowledge of the remedial efficiency and the way IM operates using natural organic materials as carriers in complex soil environments is limited. In this study, we loaded a functional microbial consortium on corn straw to analyze the effect of IM on PAH concentration and explore the potential remediation mechanisms of IM in PAH-contaminated soil. The findings revealed that the removal rate of total PAHs in the soil was 88.25% with the application of IM after 20 days, which was 39.25% higher than the control treatment, suggesting that IM could more easily degrade PAHs in soil. The findings from high-throughput sequencing and quantitative PCR revealed that the addition of IM altered the bacterial community structure and key components of the bacterial network, enhanced cooperative relationships among bacteria, and increased the abundance of bacteria and functional gene copies such as nidA and nahAc in the soil, ultimately facilitating the degradation of PAHs in the soil. This study enhances our understanding of the potential applications of IM for the treatment of PAH-contaminated soil.

Anthropogenic determination and risk assessment of total petroleum hydrocarbons of ground water within Orji auto repair workshops, Owerri, Imo State, Nigeria

The research determined the anthropogenic source and risk evaluation of total petroleum hydrocarbons of some ground water sources within Orji auto repair workshops, Owerri, Imo State, Nigeria. The concentrations of total petroleum hydrocarbons in different groundwater samples within this vicinity were determined by selecting samples from five sampling locations using the liquid-liquid extraction process and gas chromatography fitted with a flame ionization detector. The concentrations of TPHs were determined with C15 (Pentadecane) and C30 (Triaconate) having the highest total concentrations in all sample locations of 29.67μg/mL and 23.17 μg/mL respectively while C13 (Tridecane) had the lowest combined concentration of 0.13 μg/mL with the presence of both low molecular weight and high molecular weight TPHs, an indication that the water samples had significant levels of carcinogens. Diagnostic ratio and correlation analyses of the samples analyzed showed contamination of the groundwater sources were both of petrogenic and pyrogenic sources. TPHs concentrations found in this study also revealed considerable amount of pollution with respect to contamination factors, pollution load index and degree of contamination. Elevated hazard index was equally observed for adults and children indicating a potential harm to the health of children and adults suggesting a higher risk of cancer from interaction with the polluted water. These results indicate that in remediation actions needs to be carried out before consumption to avoid fatal long term heath consequences.

Biodegradation of Petroleum Sludge by Methylobacterium sp. Strain ZASH

A bacterium was isolated from sludge-contaminated soil in a petroleum refinery and tested for its ability to degrade aliphatic hydrocarbon compounds present in petroleum sludge. The isolate was grown on minimal salt media agar supplemented with 1% (w/v) petroleum sludge. The isolate was tentatively identified as Methylobacterium s p. s t rain ZASH based on the partial 16s rDNA molecular phylogeny. The bacterium grew optimally between the temperatures of 30°C and 35°C, pH 7 and 7.5, 0.5% and 1.5% (v/v) Tween 80 as the surfactant, and between 1% and 2% (w/v) peptone as the nitrogen source. The constants derived from the Haldane equation were μmax = 0.039 hr-1, Ks = 0.385% (w/v) total petroleum hydrocarbons (TPH) or 3,850 mg/L TPH, and Ki =1.12% (w/v) TPH or 11,200 mg/L. The maximum biodegradation rate exhibited by this strain was 19 mg/L/hr at an initial TPH concentration of 10,000 mg/L. Gas chromatography analysis revealed that after 15 days the strain was able to degrade all aliphatic n-alkanes investigated with different efficiencies. Shorter n-alkanes were generally degraded more rapidly than longer n-alkanes with 90% removal for C-12 compared to only 30% removal for C-36. The addition of sawdust did not improve bacterial degradation of petroleum hydrocarbons, but it assisted in the removal of remaining undegraded hydrocarbons through adsorption.

Lipid degrading microbe consortium driving micro-ecological evolvement of activated sludge for cooking wastewater treatment

In this study, a lipid degrading microbe consortium (LDMC) was assembled to improve the performance of activated sludge (AS) on cooking wastewater purification. LDMC can rapidly degrade high-level oil (efficiency beyond 93.0% at 5.0 g/L) as sole carbon source under various environmental conditions (10.0-45.0 °C, pH 2.0-12.0). With LDMC inoculation, AS' water treatment performance was significantly enhanced, which removed 36.10 and 48.93% more chemical oxygen demand (COD) and ammonia nitrogen from wastewater than control. A better settling property and smaller bulking risk were found with LDMC inoculation, indicated by a lower SV₃₀ and SVI index but a higher MLSS. By GC/MS analysis, a gradual degradation on the end of the fatty acid chain was suggested. LDMC inoculation significantly changed AS's microbial community structure, improved its stability, decreased the microbial community diversity, facilitated the enrichment of lipid degraders and functional genes related to lipid bio-degradation. Lipid degraders including Nakamurella sp. and Stenotrophomona sp., etc. played a crucial role during oil degradation. Sludge structure maintainers such as Kineosphaera sp. contributed largely to the stability of AS under exogenous stress. This study provided an efficient approach for cooking wastewater treatment along with the underlying mechanism exploration, which should give insights into oil-containing environmental remediation.

Selective Adsorption and Efficient Degradation of Petroleum Hydrocarbons by a Hydrophobic/Lipophilic Biomass Porous Foam Loaded with Microbials

Highly efficient elimination of petroleum pollution is of great importance for addressing environmental issues and social sustainability. In this study, we demonstrate a novel strategy for efficient elimination of petroleum pollution by selective adsorption of it by an ultralight hydrophobic/lipophilic microorganism-loaded biomass porous foam (BTS-MSFT4@MTMS) followed by a green degradation of adsorbates under mild conditions. The porous structure of biomass porous foam (MSFT) could provide plenty of room for immobilization of Bacillus thuringiensis (BTS), while a simple surface modification of the MSFT load with a BTS strain (BTS-MSFT4) by methyltrimethoxysilane (MTMS) could change its wettability from hydrophilic to lipophilic, which makes selective adsorption of hydophobic petroleum pollution from water for biodegradation possible. As expected, using a petroleum n-hexadecane solution with a concentration of 3% as a model oily wastewater, the as-prepared BTS-MSFT4@MTMS possesses both a superior selective adsorption of ca. 99% and high degradation activity with a high degradation rate of up to 86.65% within 8 days under the conditions of 37 °C, 120 r min^-1, and pH = 7, while the degradation rates for the BTS-MSFT4 and the free BTS strain were measured to be only 81.62 and 65.65%, respectively, under the same conditions. In addition, the results obtained from the study on environment tolerance show that the BTS-MSFT4@MTMS exhibits a strong tolerance under different conditions with various pHs, temperatures, and initial concentrations. Compared with the existing methods for removal of petroleum pollution by direct adsorption of petroleum pollution via superoleophilic porous materials or applying free microorganisms for biodegradation only, which suffers the drawbacks of low selectivity or poor efficiency, our method has great advantages of cost-effectiveness, scalable fabrication, and high efficiency without secondary pollution. Moreover, such a two-in-one strategy by integration of both selective adsorption and biodegradation into biodegradable BTS-MSFT4@MTMS may particularly have great potential for practical application in environmental remediation.

Preparation, optimization and reusability of immobilized petroleum-degrading bacteria

In the remediation of marine pollution, it is important to effectively degrade pollutants and reuse petroleum-degrading bacteria. In order to obtain more effective biodegradability and reusability, an immobilized bacteria combination with petroleum-degrading bacteria, sodium alginate (SA) and biochar by adsorption-embedding method was systematically analysed. The results indicated that the immobilized bacteria had good mechanical properties and the degradation rate was 51% when the straw (CS) was 3%, the SA and CaCl₂ were 4.5% and 6%, respectively. Besides, SA-CS-DM-PVA has the highest degradation rate and the lowest broken rate, above 51% and below 6.1% respectively. The optimum dosage of the modified immobilized bacteria was 132, degradation time was 5d, and reuse frequency was 4 times. Moreover, immobilized bacteria characterized by scanning electron microscopy (SEM), results showed that there were more pores on the surface after degradation, and the carrier was exposed. Therefore, the modified immobilized bacteria with good degradability and reusability, have good application prospects in the treatment of marine oil pollution.

Biodegradation of petroleum refining industry oil sludge by microbial-assisted biocarrier matrix: process optimization using response surface methodology

Safe disposal of petroleum oil sludge generated from crude oil storage tank bottom is a major challenge for petroleum refineries across the globe. The presence of long chain hydrocarbons in petroleum oil sludge are known to have effects on the environment through bioaccumulation or biosorption. The present study was focused to develop a modified bioremediation process using hydrocarbonoclastic microbial-assisted biocarrier matrix (MABC) mediated through biosurfactants and biocatalysts for the efficient treatment of petroleum industrial oily sludge. The development of hydrocarbonoclastic microbial-assisted biocarrier matrix was confirmed by scanning electron microscopy analysis. The biocatalysts such as lipase, laccase, esterase and biosurfactant produced by MABC system were found to be 40 U/mg, 18 U/mg, 36 U/mg and 220 mg/g of oil sludge respectively using one variable at a time approach. Further, the response surface methodology was used to determine the optimum treatment conditions (Time, pH, Mass of biocarrier matrix and Amount of oil sludge) for the enhanced removal of total petroleum hydrocarbons (TPH) present in the oil sludge and TPH was degraded by 88.78% at Hydraulic Retention Time of 7 days. The biodegradation of oil sludge was confirmed using Gas Chromatography-Mass Spectrometry analysis.

Study of the Characteristics of Two Immobilized Microbial Materials in Degradation and Evolution of Petroleum Hydrocarbon

To enhance the degradation efficiency of oily wastewater, polyacrylamide (PAM)-sodium alginate (SA) and poly(vinyl alcohol) (PVA)-sodium alginate (SA) were mixed and used as spherical supporting materials for the immobilization of microbials, which were employed as a platform to study the degradation of total petroleum hydrocarbons (TPHs) in the oily wastewater. The degradation and evolution of normal paraffin (n-paraffin) series have been studied by determining the crude oil group composition of the residual oils by the gas chromatography-mass spectrometry (GC-MS) analysis. The results show that the half-lives of the PAM-SA-immobilized microorganisms are 6.21 days, which is 2.11 days less than that of PVA-SA, indicating that more nutrients are provided by PAM-SA for microbial growth, which can accelerate the degradation of TPHs. As can be seen from the GC-MS analysis, the main peak carbons of the n-paraffin series are moved backward after 14 days of degradation, implying the degrading advantage of n-paraffin with low carbon numbers. The ∑C21^-/∑C22⁺ value of PAM-SA was measured to be 0.749, which is greater than that of PVA-SA (0.051), indicating that PAM-SA has a superior ability to degrade normal paraffins with high carbon numbers. After 14 days of degradation, an odd-even predominance (OEP) (the mass ratio of normal alkanes of odd carbon/even carbon) value of 1.075 for PAM-SA was obtained, which is slightly larger than that of PVA-SA (0.967), indicating a better degradation performance of PAM-SA, especially for the degradation of the even-carbon normal paraffins with high carbon numbers. The Pr/Ph of PAM-SA is 0.938, which is also greater than that of PVA-SA (0.844), indicating that the ability of PAM-SA for the degradation of isoprenoids is superior to that of PVA-SA under the immobilized conditions. Based on these results, in terms of immobilization of microorganisms, PAM-SA, instead of PVA-SA, is more advantageous for the degradation of TPH in the oily wastewater.

Systematic degradation mechanism and pathways analysis of the immobilized bacteria: Permeability and biodegradation, kinetic and molecular simulation

In order to effectively improve the degradation rate of diesel, a systematic analysis of the degradation mechanism used by immobilized bacteria is necessary. In the present study, diesel degradation mechanisms were assessed by analyzing permeability, biodegradation, adsorption kinetics, and molecular simulation. We found that bacteria immobilized on cinnamon shells and peanut shells degraded relatively high amounts of diesel (69.94% and 64.41%, respectively). The primary degradation pathways used by immobilized bacteria included surface adsorption, internal uptake, and biodegradation. Surface adsorption was dominant in the early stage of degradation, whereas biodegradation was dominant in later stages. The diesel adsorption rate of the immobilized bacteria was in agreement with the pseudo second-order kinetic model. The immobilized bacteria and diesel interacted through hydrogen bonds.

Study on Degradation of Oily Wastewater by Immobilized Microorganisms with Biodegradable Polyacrylamide and Sodium Alginate Mixture

In this work, four immobilized kinds of mixed microorganisms were prepared by uploading oil-degradation bacteria into the cross-linked biodegradable polyacrylamide and sodium alginate mixture supporting material, which were employed for efficient degradation of oily wastewater. The morphology of immobilized microbial pellets was characterized by scanning electron microscopy after 7d and 14d of duration. The components of residual crude oil were determined by gas chromatography-mass spectrometry, and the microbial degradation and evolution of n-alkanes, terpenoids, and steroids were studied. The results show that the oil degradation rate for experimental group I (sample containing 1% crude oil) and experimental group II (sample containing 3% crude oil) reaches as high as 70 and 40%, respectively, after 14d of degradation of saturated hydrocarbon total petroleum hydrocarbons. For different oil components, the degradation degree is in the order of tricycoloditerpanes > homohopanes > norhopanes. The order of the degradation degree of steroids with different carbon atoms is C₂₇ > C₂₈ > C₂₉. In terms of evolution characteristics, it can be seen from the biological evolution parameters of n-alkanes that only a slight degradation for odd-even carbon by biodegradable bacteria was achieved, whereas high degradation for isoprene alkanes was observed. According to the biological evolution parameters of hopane and sterane, hopane C31α β-22S/22S + R and sterane C29α α20S/20(S + R) were all greater than 0.4, that is, they are all strongly degraded by microorganisms.