N,N-Dimethylformamide-Protected Single-Sized Metal Nanoparticles and Their Use as Catalysts for Organic Transformations

Recyclable and air-stable colloidal manganese nanoparticles catalyzed hydrosilylation of alkenes with tertiary silane

We synthesized N,N-dimethylformamide (DMF)-stabilized manganese nanoparticles (Mn NPs) in a one-step process under air using manganese(ii) chloride as the precursor. The Mn NPs were characterized in terms of particle size, oxidation state, and local structure using annular dark-field scanning transmission electron microscopy (ADF-STEM), X-ray photoelectron spectroscopy (XPS), and X-ray absorption spectroscopy (XAS). The results indicate that Mn NPs are divalent nanosized particles with Mn-O bonds. The Mn NPs exhibited high catalytic activity, achieving a turnover number (TON) of 15 800, surpassing previous manganese catalysts in alkene hydrosilylation. Furthermore, the Mn NPs maintained their catalytic activity after the reaction, enabling multiple recycling.

Exploring Catalytic Intermediates in Pd-Catalyzed Aerobic Oxidative Amination of 1,3-Dienes: Multiple Metal Interactions of the Palladium Nanoclusters

Metal nanoclusters (NCs) have unique properties because of their small size, which makes them useful as catalysts in reactions like cross-coupling. Pd-catalyzed oxidative amination, which involves dehydrogenative C-N bond formation, uses Pd complexes as the active species. It is known that the catalytic conditions involve the formation of Pd(0) species from Pd NCs, but the precise role of Pd NCs in the transformations has not been established. In this study, we investigated the characteristic properties of Pd NCs in oxidative amination of 1,3-dienes. The reaction achieved direct amination of commercially accessible 1,3-dienes with secondary aromatic amines, providing a variety of nitrogen containing 1,3-dienes. The compound was applicable to radical polymerization to provide the nitrogen-fabricated 1,3-diene-based polymer, which exhibited a different thermal stability compared to aliphatic nitrogen-fabricated diene polymers. In addition to the synthetic utility, by combining X-ray absorption fine structure and small-angle X-ray scattering analysis, we revealed amines and 1,3-dienes affected metal leaching from the Pd nanoparticles and stabilization of Pd NCs in the catalytic reaction. Additionally, DFT calculation suggested that the catalytic intermediate contained multiple adjacent Pd atoms and was responsible for formation of an σ-allylic intermediate that is difficult to form with the use of Pd complexes. These results could be used to understand the underlying phenomenon in the oxidative coupling reaction and develop Pd NCs-based dehydrogenation.

Air-Stable Ni Catalysts Prepared by Liquid-Phase Reduction Using Hydrosilanes for Reactions with Hydrogen

The liquid-phase reduction method for the preparation of metal nanoparticles (NPs) by the reduction of metal salts or metal complexes in a solvent with a reducing agent is widely used to prepare Ni NPs that exhibit high catalytic activity in various organic transformations. Intensive research has been conducted on control of the morphology and size of Ni NPs by the addition of polymers and long-chain compounds as protective agents; however, these agents typically cause a decrease in catalytic activity. Here, we report on the preparation of Ni NPs using hydrosilane (Ni-Si) as a reducing agent and a size-controlling agent. The substituents on silicon can control not only the size but also the crystal phase of the Ni NPs. The prepared Ni NPs exhibited high catalytic performance for the hydrogenation of unsaturated compounds, aromatics, and heteroaromatics to give the corresponding hydrogenated products in high yields. The unique feature of Ni catalysts prepared by the hydrosilane-assisted method is that the catalysts can be handled under air as opposed to conventional Ni catalysts such as Raney Ni. Characterization studies indicated that the surface hydroxide was reduced under the catalytic reaction conditions with H2 at around 100 °C and with the assistance of organosilicon compounds deposited on the catalyst surface. The hydrosilane-assisted method presented here could be applied to the preparation of supported Ni catalysts (Ni-Si/support). The interaction between the Ni NPs and a metal oxide support enabled the direct amination of alcohols with ammonia to afford the primary amine selectively.

Characterization of an unanticipated indium-sulfur metallocycle complex

We have produced a novel indium-based metallocycle complex (In-MeSH), which we initially observed as an unanticipated side-product in metal-organic framework (MOF) syntheses. The serendipitously synthesized metallocycle forms via the acid-catalysed decomposition of dimethyl sulfoxide (DMSO) during solvothermal reactions in the presence of indium nitrate, dimethylformamide and nitric acid. A search through the Cambridge Structural Database revealed isostructural zinc, ruthenium and palladium metallocycle complexes formed by other routes. The ruthenium analogue is catalytically active and the In-MeSH structure similarly displays accessible open metal sites around the outside of the ring. Furthermore, this study also gives access to the relatively uncommon oxidation state of In(II), the targeted synthesis of which can be challenging. In(II) complexes have been reported as having potentially important applications in areas such as catalytic water splitting.

Boosting the activity of Mizoroki-Heck cross-coupling reactions with a supramolecular palladium catalyst favouring remote Zn⋯pyridine interactions

Transition metal catalysis benefitting from supramolecular interactions in the secondary coordination sphere in order to pre-organize substrates around the active site and reach a specific selectivity typically occurs under long reaction times and mild reaction temperatures with the aim to maximize such subtle effects. Herein, we demonstrate that the kinetically labile Zn⋯N interaction between a pyridine substrate and a zinc-porphyrin site serving for substrate binding is a unique type of weak interaction that enables identification of supramolecular effects in transition metal catalysis after one hour at a high reaction temperature of 130 °C. Under carefully selected reaction conditions, supramolecularly-regulated palladium-catalyzed Mizoroki-Heck reactions between 3-bromopyridine and terminal olefins (acrylates or styrenes) proceeded in a more efficient manner compared to the non-supramolecular version. The supramolecular catalysis developed here also displayed interesting substrate-selectivity patterns.

Heterostructure charge transfer dynamics on self-assembled ZnO on electronically different single-walled carbon nanotubes

The charge transfer kinetics of the catalyst particles play a key role in advanced oxidation processes (AOP) for the complete destruction of recalcitrant and persistent contaminants in water. Here, a significant improvement in the photocatalytic performance is observed in the Single-Walled Carbon Nanotube (SWCNT)-ZnO heterostructure photocatalyst. The charge transfer dynamics and factors affecting AOP are studied using ZnO nanoparticles self-assembled onto three electronically different SWCNTs (metallic, semiconducting, and pristine) via the precipitation method, introducing a heterojunction interface. The creation of the SWCNT/ZnO heterostructure interface improves charge transfer and separation, resulting in a charge carrier lifetime of 7.37 ns. Also, surface area, pore size, and pore volumes are increased by 4.2 times compared to those of ZnO. The nanoparticles-coated face-mask fabric used as the floating photocatalyst exhibited high stability and recyclability with 99% RhB degradation efficiency under natural sunlight and 94% under UV light after the 5th cycle. The surface and crystal defects-oxygen or zinc defects/interstitials open new reaction active sites that assist in charge carrier transfer and act as pollutant absorption and interaction sites for enhanced performance. The ideal band edge positions of the valence band and conduction band favor the generation of H2O/OH•, OH·/OH, and O2/HO2• reactive oxygen species. OH• radicals are found to play a vital role in this AOP by using ethanol as an OH• scavenger.

Induced defect and ZnO nano-flower formation by N, N, dimethylformamide solvent for natural sunlight responsive floating photocatalytic advanced oxidation process

The increasing disposal of dyes and face-mask propel to hunt for a solution to fight water pollution while assisting sustainability. This research overcomes the key challenges associated with implementing photocatalytic water treatment by using natural sunlight active photocatalyst, changing slurry system, eliminating the use of external triggering sources, and reusing face-mask fabric coated with ZnO to act as a floating photocatalyst. Unique morphological structures-cauliflower, hydrangea, and petals-likes are obtained with the variation in synthesis medium (Diethylene glycol (DEG), N, N-dimethyl formamide (DMF), H₂O) and methods (precipitation, solvothermal) which are found to be dependent on the solvent properties. With the use of DMF having a higher dielectric constant and formation of dimethyl amine via hydrolysis, it influences in forming petals and flower-like morphologies, unlike DEG solvent. The ZnO-coated face-mask fabric is used as the floating photocatalyst under natural sunlight observing comparable 91% degradation efficiency in 100 min with that of 99% efficiency in the UV light-illuminated slurry system. The formation of petals-like structures, defects from the liberation of DMF molecules from the ZnO surface by calcination, larger pore sizes and pore volumes provided a synergistic effect on enhancing the degradation efficiency in these cases.

Electrospun Polyacrylonitrile Silver(I,III) Oxide Nanoparticle Nanocomposites as Alternative Antimicrobial Materials

Infectious microbial diseases can easily be transferred from person to person in the air or via high contact surfaces. As a result, researchers must aspire to create materials that can be implemented in surface contact applications to disrupt pathogen growth and transmission. This study examines the antimicrobial properties of polyacrylonitrile (PAN) nanofibers coated with silver nanoparticles (AgNPs) and silver(I,III) oxide. PAN was homogenized with varied weight concentrations of silver nitrate (AgNO3) in N,N-dimethylformamide solution, a common organic solvent that serves as both an electrospinning solvent and as a reducing agent that forms AgNPs. The subsequent colloids were electrospun into nanofibers, which were then characterized via various analysis techniques, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray analysis, dynamic light scattering, and X-ray photoelectron spectroscopy. A total of 10 microbes, including 7 strains of Gram-positive bacteria, 2 strains of Gram-negative bacteria, and Candida albicans, were incubated with cutouts of various PAN-AgNP nanocomposites using disk diffusion methods to test for the nanocomposites' antimicrobial efficiency. We report that our electrospun PAN-AgNP nanocomposites contain 100% AgO, a rare, mixed oxidation state of silver(I,III) oxide that is a better sterilizing agent than conventional nanosilver. PAN-AgNP nanocomposites also retain a certain degree of antimicrobial longevity; samples stored for approximately 90 days demonstrate a similar antimicrobial activity against Escherichia coli (E. coli) and Lactobacillus crispatus (L. crispatus) when compared to their newly electrospun counterparts. Moreover, our results indicate that PAN-AgNP nanocomposites successfully display antimicrobial activity against various bacteria and fungi strains regardless of their resistance to conventional antibiotics. Our study demonstrates that PAN-AgNP nanocomposites, a novel polymer material with long-term universal antimicrobial stability, can potentially be applied as a universal antimicrobial on surfaces at risk of contracting microbial infections and alleviate issues related to antibiotic overuse and microbial mutability.

Antibacterial Activity of Electrospun Polyacrylonitrile Copper Nanoparticle Nanofibers on Antibiotic Resistant Pathogens and Methicillin Resistant Staphylococcus aureus (MRSA)

Bacteria induced diseases such as community-acquired pneumonia (CAP) are easily transmitted through respiratory droplets expelled from a person’s nose or mouth. It has become increasingly important for researchers to discover materials that can be implemented in in vitro surface contact settings which disrupt bacterial growth and transmission. Copper (Cu) is known to have antibacterial properties and have been used in medical applications. This study investigates the antibacterial properties of polyacrylonitrile (PAN) based nanofibers coated with different concentrations of copper nanoparticles (CuNPs). Different concentrations of copper sulfate (CuSO₄) and polyacrylonitrile (PAN) were mixed with dimethylformamide (DMF) solution, an electrospinning solvent that also acts as a reducing agent for CuSO₄, which forms CuNPs and Cu ions. The resulting colloidal solutions were electrospun into nanofibers, which were then characterized using various analysis techniques. Methicillin-Resistant isolates of Staphylococcus aureus, an infective strain that induces pneumonia, were incubated with cutouts of various nanocomposites using disk diffusion methods on Luria-Bertani (LB) agar to test for the polymers’ antibacterial properties. Herein, we disclose that PAN-CuNP nanofibers have successfully demonstrated antibacterial activity against bacteria that were otherwise resistant to highly effective antibiotics. Our findings reveal that PAN-CuNP nanofibers have the potential to be used on contact surfaces that are at risk of contracting bacterial infections, such as masks, in vivo implants, or surgical intubation.

N,N-Dimethylformamide-stabilized ruthenium nanoparticle catalyst for β-alkylated dimer alcohol formation via Guerbet reaction of primary alcohols

N,N-Dimethylformamide-stabilized Ru nanoparticles (NPs) provide a highly efficient catalyst for the Guerbet reaction of primary alcohols. DMF-modified Ru NPs were synthesized, and characterized by transition electron microscopy, and X-ray absorption spectroscopy, X-ray photoelectronspectroscopy, and Fourier-transform infrared spectroscopy. The Ru NP catalyst was highly durable during catalytic reactions under external additive/solvent-free conditions.

Recent Progress of Metal Nanoparticle Catalysts for C–C Bond Forming Reactions

Over the past few decades, the use of transition metal nanoparticles (NPs) in catalysis has attracted much attention and their use in C–C bond forming reactions constitutes one of their most important applications. A huge variety of metal NPs, which have showed high catalytic activity for C–C bond forming reactions, have been developed up to now. Many kinds of stabilizers, such as inorganic materials, magnetically recoverable materials, porous materials, organic–inorganic composites, carbon materials, polymers, and surfactants have been utilized to develop metal NPs catalysts. This review classified and outlined the categories of metal NPs by the type of support.

Surfactant-Free Precious Metal Colloidal Nanoparticles for Catalysis

Colloidal syntheses of nanoparticles (NPs) are one of the preferred approaches to prepare precious metal catalysts. Unfortunately, most colloidal syntheses developed require stabilizing agents to avoid NP agglomeration and/or control NP size and morphology. While these surfactants can bring positive features, they typically block catalytically active sites on the NP surface. As a consequence, these additives often need to be removed by energy and/or time consuming steps, at the risk of complicating the synthesis, introducing irreproducibility and negatively altering the structure and properties of the prepared catalysts. Fortunately, several surfactant-free colloidal syntheses have been reported and are being developed. This Mini Review addresses the challenges in defining a surfactant-free colloidal synthesis of NPs and survey established and emerging strategies to obtain surfactant-free colloidal precious metal NPs. A focus is given to approaches that show promising features to bridge the gap between fundamental and applied research towards industrial applications.

Shielding Effect of Nanomicelles: Stable and Catalytically Active Oxidizable Pd(0) Nanoparticle Catalyst Compatible for Cross-Couplings of Water-Sensitive Acid Chlorides in Water

Under the shielding effect of nanomicelles, a sustainable micellar technology for the design and convenient synthesis of ligand-free oxidizable ultrasmall Pd(0) nanoparticles (NPs) and their subsequent catalytic exploration for couplings of water-sensitive acid chlorides in water is reported. A proline-derived amphiphile, PS-750-M, plays a crucial role in stabilizing these NPs, preventing their aggregation and oxidation state changes. These NPs were characterized using ¹³C nuclear magnetic resonance (NMR), infrared (IR), and surface-enhanced Raman scattering (SERS) spectroscopy to evaluate the carbonyl interactions of PS-750-M with Pd. High-resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDX) studies were performed to reveal the morphology, particle size distribution, and chemical composition, whereas X-ray photoelectron spectroscopy (XPS) measurements unveiled the oxidation state of the metal. In the cross-couplings of water-sensitive acid chlorides with boronic acids, the micelle's shielding effect and boronic acids plays a vital role in preventing unwanted side reactions, including the hydrolysis of acid chlorides under basic pH. This approach is scalable and the applications are showcased in multigram scale reactions.

N,N-Dimethylformamide-stabilised palladium nanoparticles combined with bathophenanthroline as catalyst for transfer vinylation of alcohols from vinyl ether

We report N,N-dimethylformamide-stabilised Pd nanoparticle (Pd NP)-catalysed transfer vinylation of alcohols from vinyl ether. Pd NPs combined with bathophenanthroline exhibited high catalytic activity. This reaction proceeded with low catalyst loading and the catalyst remained effective even after many rounds of recycling. The observation of the catalyst using transmission electron microscopy and dynamic light scattering implied no deleterious aggregation of Pd NPs.

Water-Soluble Noble Metal Nanoparticle Catalysts Capped with Small Organic Molecules for Organic Transformations in Water

This article recaps a variety of interesting catalytic studies based on solubilized and freely movable noble metal nanoparticle catalysts employed for organic reactions in either pure water or water-organic biphasic systems. Small organic ligand-capped metal nanoparticles are fundamentally attractive materials due to their enormous potential as a well-defined system that can provide spatial control near active catalytic sites. The nanoparticle catalysts are first grouped based on the synthetic method (direct reduction, phase transfer, and redispersion) and then again based on the type of reaction such as alkene hydrogenation, arene hydrogenation, nitroaromatic reduction, carbon-carbon coupling reactions, etc. The impacts of various ligands on the catalytic activity and selectivity of semi-heterogeneous nanoparticles in water are discussed in detail. The catalytic systems using polymers, dendrimers, and ionic liquids as supporting or protecting materials are excluded from the subject of this review.

Cross β-alkylation of primary alcohols catalysed by DMF-stabilized iridium nanoparticles

A simple method for the cross β-alkylation of linear alcohols with benzyl alcohols in the presence of DMF-stabilized iridium nanoparticles was developed. The nanoparticles were prepared in one-step and thoroughly characterized. Furthermore, the optimum reaction conditions have a wide substrate scope and excellent product selectivity.

Improved electroless platinum contacts on CdZnTe X- and γ-rays detectors

Platinum is a promising candidate for the realization of blocking electrical contacts on cadmium-zinc-telluride (CdZnTe or CZT) radiation detectors. However, the poor mechanical adhesion of this metal often shortens the lifetime of the final device. In this work, a simple and effective procedure to obtain robust platinum contacts by electroless deposition is presented. Microscopical analysis revealed the final thickness and composition of the contact layer and its adhesion to the bulk crystal. The blocking nature of the Pt-CdZnTe junction, essential to obtain low noise devices, was confirmed by current–voltage measurements. The planar Pt-CdZnTe-Pt detectors showed good room temperature spectroscopic performance with energy resolution of 4% (2.4 keV) and 3% (3.7 keV) FWHM at 59.5 and 122.1 keV, respectively. Finally, we showed, for the first time, that platinum contacts allow the estimation of the carrier lifetime and mobility of both holes and electrons by using current transient measurements. This demonstrated the optimal hole extraction capability of such contacts.

Synthesis and Characterization of N,N-Dimethylformamide-Protected Palladium Nanoparticles and Their Use in the Suzuki-Miyaura Cross-Coupling Reaction

Herein, the synthesis of new N,N-dimethylformamide (DMF)-protected palladium nanoparticles (Pd NPs-OAc) employing Pd (OAc)2 (= Pd(OCOCH3)2) as the NP precursor is reported. Pd NPs-OAc were comprehensively characterized by transmission electron microscopy, FT-IR, NMR, and X-ray photoelectron spectroscopy to determine the Pd NP size distribution and the coordination state of DMF. Pd NPs-OAc were compared with Pd NPs-Cl, using PdCl2 as the NP precursor. The Suzuki-Miyaura cross-coupling reaction proceeded efficiently in the presence of Pd NPs-OAc and a high catalytic activity was observed with a turnover number of up to 1.5 × 105. Furthermore, the Pd NP-OAc catalysts could be recycled at least five times.