Fluorescence-Scattering Dual-Signal Response of Carbon Dots@ZIF-90 for Phosphate Ratiometric Detection

Smartphone-based dual inverse signal MOFs fluorescence sensing for intelligent on-site visual detection of malachite green

The development of intelligent, sensitive, and visual methods for the rapid detection of veterinary drug residues is essential to ensure food quality and safety. Here, a smartphone-based dual inverse signal MOFs fluorescence sensing system was proposed for intelligent in-site visual detection of malachite green (MG). A UiO-66-NH2@RhB-dual-emission fluorescent probe was successfully synthesized in one step using a simple one-pot method. The inner filter effect (IFE) quenches the red fluorescence, while hydrogen bonding interaction enhances the blue fluorescence, enabling highly sensitive, accurate, and visual detection of MG dual inverse signals through fluorescence analysis. The probe showed great linearity over a wide range of 0.1-100 μmol/L, with a limit of detection (LOD) of 20 nmol/L. By integrating smartphone photography and RGB (red, green, and blue) analysis, accurate quantitative analysis of MG in water and actual fish samples can be achieved within 5 min. This developed platform holds great promise for the on-site detection of MG in practical applications, with the advantages of simplicity, cost-effectiveness, and rapidity. Consequently, it may open up a new pathway for on-site evaluation of food safety and environmental health.

Portable tri-color ratiometric fluorescence paper sensor for intelligent visual detection of dual-antibiotics and aluminium ion

The toxicological effect between co-existed antibiotics and metal ions was dangerous to the ecological environment and public health. However, the rapid quantification tools with convenience, accuracy and low cost for the detection of multiple targets were still challenging. Herein, a portable tri-color ratiometric fluorescence paper sensor was constructed by coupling of blue carbon dots and fluorescence imprinted polymer for down/up conversion simultaneous detection of tetracycline and sulfamethazine. Interestingly, the cascade detection of aluminum ion was also realized based on the individual detection system of tetracycline without the assistance of complex coupling reagents. The detection limits of smartphone method for the visual detection of tetracycline, sulfamethazine and aluminum ion were calculated as 0.014 μM, 0.004 μM and 0.019 μM, respectively. The portable fluorescence paper sensor was applied for the visual detection of tetracycline, sulfamethazine and aluminum ion in actual samples successfully with satisfactory recoveries. With the advantages of rapidness, low cost, and portability, the developed portable fluorescence paper sensor provided a new strategy for the visual real-time detection of multiple targets.

Zeolitic imidazolate framework-encapsulated zinc porphyrin photoresponsive nanozyme for colorimetric/fluorescent dual-mode sensing of glyphosate

A novel zeolitic imidazolate framework-encapsulated zinc porphyrin (ZnTCPP@ZIF-90) photoresponsive nanozyme is proposed for the colorimetric/fluorescent dual-mode visual sensing of glyphosate (Gly). ZnTCPP@ZIF-90 exhibits photoresponsive oxidase-like activity and fluorescence quenching behavior. Meanwhile, the outer ZIF-90 layer can be selectively destroyed by Gly, causing the release of free ZnTCPP, resulting in the enhanced enzyme-like activity as well as fluorescence emission. The constructed ZnTCPP@ZIF-90 was successfully used for the colorimetric/fluorescent dual-mode detection of Gly. Additionally, the colorimetric and fluorescent images information captured by the smartphone were converted to color intensity (HSV/RGB values), with limits of detection of 0.27 μg/mL and 0.19 μg/mL, respectively. The proposed dual-mode sensor exhibits excellent selectivity and reliability for detecting Gly, and can be successfully applied to the analysis of real samples such as tap water, lake water, and fruit washing water. The current research efforts are expected to provide new perspectives for designing highly active photoresponsive nanozymes and their stimuli-responsive sensing systems, paving the way for their applications in portable dual-mode chemical sensing and environmental monitoring.

DNA-induced assembly of biocatalytic nanocompartments for sensitive and selective aptasensing of aflatoxin B1

Enzyme cascade with high specificity and catalytic efficiency has significant applications for developing efficient bioanalysis methods. In this work, a sensitive and selective aptasensor was constructed based on the DNA-induced assembly of biocatalytic nanocompartments. Different from the conventional co-immobilization in one pot, the cascade enzymes of glucose oxidase (GOX) and horseradish peroxidase (HRP) were separately encapsulated in ZIF-90 nanoparticles. After conjugating complementary DNA or aptermer on enzyme@ZIF-90, DNA hybridization drove enzyme@ZIF-90 connected into clusters or linked on other DNA modified biocatalytic nanocompartment (such as invertase loaded Fe3O4@SiO2). Owing to the shortened distance between enzymes, the catalytic efficiency of connected clusters was significantly enhanced. However, the specifically interaction between the substrate molecule and aptermer sequence would lead to the disassembly of DNA duplexes, resulting in the gradual "switching-off" of cascade reactions. With aflatoxin B1 (AFB1) as the model substrate, the compartmentalized three-enzyme nanoreactors showed good analytical performance in the linear range from 0.01 ng mL-1 to 50 ng mL-1 with a low detection limit (3.3 pg mL-1). In addition, the proposed aptasensor was applied to detect AFB1 in corn oil and wheat powder samples with total recoveries ranging from 94 % to 109 %. As a result, this DNA-induced strategy for enzyme cascade nanoreactors opens new avenues for stimuli-responsive applications in biosensing.

High-Sensitivity Creatinine Detection via a Dual-Emission Ratiometric Fluorescence Probe Incorporating Amino-MIL-53@Mo/ZIF-8 and Rhodamine B

Quantifying creatinine (Cn) in biological fluids is crucial for clinically assessing renal insufficiency, thyroid irregularities, and muscle damage. Therefore, it is crucial for human health to have a simple, quick, and accurate Cn analysis technique. In this study, we have successfully synthesized a 3D ratiometric dual-metal-organic framework, namely, the amino-MIL-53@Mo/ZIF-8 and rhodamie B heterostructure, using an internal strategy for sustained growth. The dual-MOF functions as an adsorbent and preconcentrates Cn. The pH, reaction time, and volume ratio of amino-MIL-53@Mo/ZIF-8/rhodamie B were optimized using the one-variable-at-a-time technique in this study. The quantitative study of the Cn concentration for this RF biosensor was obtained under ideal conditions (R2 = 0.9962, n = 3), encompassing the linear range of 0.35-11.1 μM. The detection and quantitation limits were 0.18 and 0.54 nM, respectively. Both intra- and interday reproducibility showed high repeatability of the RF biosensor, UV-vis, and ZETA potential studies, and the Stern-Volmer relationship was used to clarify the fluorescence quenching process. These superior sensing capabilities and the benefits of simple manufacturing, acceptable stability, and practicality make the RF biosensor intriguing for ultrasensitive Cn detection in practical applications.

A dual-functional fluorescence probe CDs@ZIF-90 for highly specific detection of Al3+ and Hg2+ in environmental water samples

In recent years, the escalating water pollution has resulted in serious harm to human health and ecological environment due to the excessive discharge of toxic metal ions such as Al3+ and Hg2+. Therefore, it is crucial to develop a simple, efficient, and rapid detection method for monitoring the levels of the metal ions in water environment to ensure public health and ecological safety. In this study, carbon dots (CDs) containing heteroatom Si were successfully synthesized by the solvothermal method. Subsequently, a novel dual-functional fluorescent sensor (CDs@ZIF-90) was constructed by integrating CDs with zeolitic imidazolate framework-90 (ZIF-90). The fluorescent composite CDs@ZIF-90 showed outstanding optical properties and excellent structural and luminescence stability in aqueous medium. Particularly, its fluorescence at 453 nm can be remarkably enhanced by Al3+ and quenched upon exposure to Hg2+. As a result, the CDs@ZIF-90 was applied in sensitive and selective determination of Al3+ and Hg2+ ions with wide linear ranges (1-200 μM and 0.05-240 μM) and low detection limits (0.81 μM and 19.6 nM). Moreover, a convenient and rapid fluorescence test strip was also successfully prepared for visual detection of Al3+ and Hg2+ ions. This work is the first try to use the CDs@ZIF-90 fluorescence sensing material for highly sensitive and selective determination of Al3+ and Hg2+ based on "turn-on" and "turn-off" dual modes, respectively and it provides a new idea for monitoring quality of drinking water and environmental water. It is of great significance for human health and environmental protection.

Orange peel-derived carbon dots/Cu-MOF nanohybrid for fluorescence determination of l-ascorbic acid and Fe3. Anal Chim Acta 2024;1287:342066. [PMID: 38182373 DOI: 10.1016/j.aca.2023.342066] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Recycling and reuse of biomass waste in synthesis of nanomaterials have recently received much attention as an effective solution for environmental protection and sustainable development. Herein, nitrogen-doped carbon dots (N-CDs) with blue emission were synthesized from the orange peels as a precursor through a simple hydrothermal method and then, modified with ethylenediamine tetraacetic acid (N-CD@EDTA). The N-CD@EDTA was embedded as a fluorophore in Cu-based metal-organic framework (MOF-199) structure (N-CD@EDTA/MOF-199) to construct fluorescence sensor toward l-ascorbic acid (L-AA) determination. The N-CD@EDTA/MOF-199 nanohybrid significantly and selectively turned on toward L-AA determination during the fluorimetric experiments. Under optimal conditions, the probe showed a suitable linear response in the concentration range of 10 nM-100 μM with a low limit of detection (LOD) of 8.6 nM and high sensitivity of 0.201 μM-1. The possible mechanism of recognition and adsorption, including the reduction of Cu 2+ nodes in the MOF-199 structure in the presence of L-AA and the release of trapped N-CD@EDTA into the solution, was explored. Moreover, the N-CD@EDTA/MOF-199/L-AA (100 μM) system was further applied as a fluorescent "on-off" sensor for Fe3+ determination with a LOD of 1.15 μM. The proposed probe was successfully used in orange juice and water samples to determine L-AA and Fe3+ with satisfactory recovery, which displays the promising capability of sensor in real samples. The recoveries obtained by suggested method are consistent with that obtained from high performance liquid chromatography (HPLC) and atomic absorption spectroscopy which confirm the favorable characteristic of the sensor for accurate determination of L-AA and Fe3+ in practical applications.

Carbon dot/Co-MOF nanocoral mediated fluorescence-scattering ratiometric sensor for highly sensitive detection of alkaline phosphatase

Abnormal expression of alkaline phosphatase (ALP) in serum has received considerable attention in health monitoring and disease diagnosis. However, conventional optical analysis based on a single signal must compromise background interference and limited sensitivity in trace analysis. As an alternative candidate, the ratiometric approach depends on the self-calibration of two independent signals in a single test to minimize interferences from the background for accurate identification. Here, a carbon dot/cobalt-metal organic framework nanocoral (CD/Co-MOF NC) mediated fluorescence-scattering ratiometric sensor has been developed for simple, stable, and highly sensitive detection of ALP. ALP-responsive phosphate production was used to coordinate cobalt ion and collapse the CD/Co-MOF NC, resulting in the recovery of fluorescence signal from dissociative CDs and the decrease of second-order scattering (SOS) signal from the cracked CD/Co-MOF NC. The ligand-substituted reaction and the optical ratiometric signal transduction provide a rapid and reliable chemical sensing mechanism. The ratiometric sensor effectively converted ALP into a ratio signal of fluorescence-scattering dual emission throughout a wide linear concentration range of six orders of magnitude with a detection limit of 0.6 mU/L. In addition, self-calibration of fluorescence-scattering ratiometric method can reduce background interference and improve sensitivity in serum, approaching recoveries of ALP from 98.4% to 101.8%. Due to the above advantages, the CD/Co-MOF NC mediated fluorescence-scattering ratiometric sensor readily provides rapid and stable quantitative detection of ALP as a promising in vitro analytical method for clinical diagnostics.

In Situ Generated Dye@MOF/COF Heterostructure for Fluorescence Detection of Chloroquine Phosphate and Folic Acid via Different Luminescent Channels

Metal-organic framework (MOF) and covalent-organic framework (COF) hybrid materials can combine the unique properties of MOF and COF components, and their applications in fluorescence sensing have attracted more and more attention. Herein, ZIF-90 is grown on 3D-COF by a simple in situ growing method in which the 7-amino-4-methylcoumarin (AMC) is encapsulated in ZIF-90 to construct a fluorescent sensor. Chloroquine phosphate (CQP) can coordinate with Zn2+ to decompose the ZIF-90 and release AMC. At 365 nm excitation, the ratiometric fluorescence signal AMC/3D-COF (I430/I598) increases linearly with CQP in a linear range of 4 × 10-5 to 4 × 10-4 M in urine. Under 340 nm excitation, quantitative analysis of CQP in the serum (3 × 10-6 to 4 × 10-5 M) is based on the fluorescence intensity of Zn-CQP/3D-COF (I384/I598). In addition, AMC@ZIF-90/3D-COF (1) exhibits high anti-interference and selectivity in sensing of FA with a "turn off" mode, with a correlation range of 1 × 10-5 to 1 × 10-3 M. The fluorescence color changes triggered by CQP under different excitation conditions, and the different fluorescence responses caused by CQP make it a highly secure anticounterfeiting platform. The synthesized dye@MOF/COF hybrids not only provide a new way to integrate multiple emission to design fluorescent probes for differentiation detection but also offer ideas for the design of anticounterfeiting platforms.

Few-layered boron nitride nanosheet as a non-metallic phosphatase nanozyme and its application in human urine phosphorus detection

Human urine phosphorus (existing in the form of phosphate) is a biomarker for the diagnosis of several diseases such as kidney disease, hyperthyroidism, and rickets. Therefore, the selective detection of phosphate in urine samples is crucial in the field of clinical diagnosis. Herein, we reported the phosphatase-like catalytic activity of few-layered h-BNNS for the first time. As the phosphatase-like activity of few-layered h-BNNS could be effectively inhibited by phosphate, a selective fluorescent method for the detection of phosphate was proposed. The linear range for phosphate detection is 0.5-10 µM with a detection limit of 0.33 µM. The fluorescent method was then explored for the detection of human urine phosphorus in real samples. The results obtained by the proposed method were consistent with those of the traditional method, indicating that the present method has potential application for urine phosphorus detection in clinical disease diagnosis.

Fluorescence wavelength shifts combined with light scattering for ratiometric sensing of chloride in the serum based on CsPbBr3@SiO2 perovskite nanocrystal composite halide exchanges

A traditional fluorescence-scattering intensity based ratiometric sensing system utilizes both inherent scattering and fluorescence intensity and has drawn extensive attention owing to its simplicity and self-calibration properties. In this work, we propose a novel ratiometric fluorescence sensing system that combines a fluorescence wavelength shift and scattering in a single window, using second-order scattering (SOS) as the representative scattering signal based on the halide exchange of CsPbBr3@SiO2 perovskite nanocrystal composites. We observe a fast halide exchange within 10 seconds, resulting in an identifiable fluorescence wavelength blue shift, while the scattering wavelength remains relatively constant for self-correction. This system could be applied for ratiometric sensing of Cl- in the serum without any sample treatment. The established wavelength-based ratiometric system demonstrates high reliability and reproducibility, paving a new way for fluorescence sensing.

Construction of nanohybrid Tb@CDs/GSH-CuNCs as a ratiometric probe to detect phosphate anion based on aggregation-induced emission and FRET mechanism

The simple preparation of a nanohybrid of terbium-doped carbon dots/glutathione-capped copper nanoclusters (Tb@CDs/GSH-CuNCs) was for the first time developed for ratiometric detection of phosphate anion (Pi). Blue-emission of Tb@CDs can trigger non-luminescence of GSH-CuNCs for aggregation-induced emission (AIE) performance due to the strong reserved coordination capacity of Tb3+. Thus, Tb@CDs/GSH-CuNCs rapidly generated dual-emission signals at 630 nm and 545 nm by directly mixing the two individual materials via the AIE effect, alongside fluorescence resonance energy transfer (FRET) process. However, by the introduction of Pi, both AIE and FRET processes were blocked because of the stronger binding affinity of Tb3+ and Pi than that of Tb3+ and -COOH on Tb@CDs, thus realizing successful ratiometric detection of Pi. The linear concentration range was 0-16 μM, with the limit of detection (LOD) of 0.32 μM. The proposed method provided new ideas for designing nanohybrid of CDs and nanoclusters (MNCs) as ratiometric fluorescent probes for analytical applications.

Aggregation-caused dual-signal response of gold nanoclusters for ratiometric optical detection of cysteine

Designing ratiometric sensors for cysteine (Cys) monitoring with high accuracy is of great significance for disease diagnosis and biomedical studies. The current ratiometric methods mainly rely on multiplex probes, which not only complicates the operation but also increases the cost, making it difficult for quantitative Cys detection in resource-limited areas. Herein, one-pot prepared gold nanoclusters (Au NCs) that glow red fluorescent were synthesized by employing glutathione as the stabilizer and reducing agent. When Fe3+ is present with Au NCs, the fluorescence is quenched and the scattering is strong because of the aggregation of Au NCs. With introduction of Cys, Cys can efficiently compete with glutathione-modified Au NCs for Fe3+, which leads to increase of fluorescence and decrease of scattering. The ratiometric determination of Cys can be thereby realized by collecting the fluorescence and SRS spectrum simultaneously. The linear range for Cys was 5-30 µM with a detection limit of 1.5 µM. In addition, the sensing system exhibits good selectivity for Cys and shows potential application in biological samples.

Ratiometric fluorescent detection of total phosphates in frozen shrimp samples using catalytic active Zr(IV) modified gold nanoclusters

Phosphate salts are important food additives in a variety of foods. In this study, the Zr(IV) modified gold nanoclusters (Au NCs) were prepared for ratiometric fluorescent sensing of phosphate additives in seafood samples. Compared with bare Au NCs, the synthesized Zr(IV)/Au NCs showed stronger orange fluorescence at 610 nm. On the other hand, the Zr(IV)/Au NCs retained the phosphatase-like activity of Zr(IV) ions and could catalyze the hydrolysis of fluorescent substrate 4-methylumbelliferyl phosphate to produce blue emission at 450 nm. The addition of phosphate salts could effectively inhibit the catalytic activity of Zr(IV)/Au NCs, resulting the fluorescence decrease at 450 nm. However, the fluorescence at 610 nm almost unchanged upon the addition of phosphates. Based on this finding, the ratiometric detection of phosphates using the fluorescence intensity ratio (I₄₅₀/I₆₁₀) was demonstrated. The method has been further applied for sensing total phosphates in frozen shrimp samples with satisfactory results.

Kill two birds with one stone: Ratiometric sensing of phosphate via a single-component probe with fluorescence-scattering dual-signal response behavior

Ratiometric fluorescence sensors gain stronger anti-interference ability via self-calibration. Nevertheless, ratiometric analysis of phosphate (Pi) still faces problems such as complicated construction process of dual emission probes and possible interferences from outputting mono-category fluorescent signal. Herein, we propose a "kill two birds with one stone" strategy to address these challenges, by simply introducing a single-component probe, porphyrin paddlewheel framework-3 (PPF-3) nanosheets without modification, encapsulation or complex, to integrate fluorescence (FL)-second-order scattering (SOS) dual-signal for ratiometric detection of Pi. PPF-3 nanosheets are constructed by coordination of Co²⁺ with 5,10,15,20-tetrakis(4-carboxyl-phenyl)-porphyrin (TCPP) ligands, displaying weak FL and strong SOS, two different and independent signals. In the response system to Pi, Co²⁺ and TCPP serve as the recognition element and signal unit, respectively. After interacting with Pi, the high affinity for Co²⁺ makes Pi snatch Co²⁺ from the PPF-3 nanosheets, causing their structure disassembly (SOS decrease) and TCPP release (FL increase). Finally, the FL-SOS ratiometric platform is successfully employed to access Pi in real water samples. Synchronous collection of FL and SOS from the single-component probe provides a simpler and more efficient way on ratiometric sensor design as well as a new useful technique for monitoring target-induced aggregation and disaggregation behavior.

Detecting phosphate using lysine-sensitized terbium coordination polymer nanoparticles as ratiometric luminescence probes

Probes for detecting phosphate ions (Pi) are required for environmental monitoring and to protect human health. Here, novel ratiometric luminescent lanthanide coordination polymer nanoparticles (CPNs) were successfully prepared and used to selectively and sensitively detect Pi. The nanoparticles were prepared from adenosine monophosphate (AMP) and Tb³⁺, and lysine (Lys) was used as a sensitizer (through the antenna effect) to switch on Tb³⁺ luminescence at 488 and 544 nm while Lys luminescence at 375 nm was quenched because of energy transfer from Lys to Tb³⁺. The complex involved is here labeled AMP-Tb/Lys. Pi destroyed the AMP-Tb/Lys CPNs and therefore decreased the AMP-Tb/Lys luminescence intensity at 544 nm and increased the luminescence intensity at 375 nm at an excitation wavelength of 290 nm, meaning ratiometric luminescence detection was possible. The ratio between the luminescence intensities at 544 and 375 nm (I₅₄₄/I₃₇₅) was strongly associated with the Pi concentration between 0.1 and 6.0 μM, and the detection limit was 0.08 μM. The dual-emission reverse-change ratio luminescence sensing method can exclude environmental effects, so the proposed assay was found to be very selective. The method was successfully used to detect Pi in real water samples, and acceptable recoveries were found, suggesting that the method could be used in practice to detect Pi in water samples.

Dye encapsulation and one-pot synthesis of microporous-mesoporous zeolitic imidazolate frameworks for CO2 sorption and adenosine triphosphate biosensing

One-pot co-precipitation of target molecules e.g. organic dyes and the synthesis of a crystal containing microporous-mesoporous regimes of zeolitic imidazolate frameworks-8 (ZIF-8) are reported. The synthesis method can be used for cationic (rhodamine B (RhB), methylene blue (MB)), and anionic (methyl blue (MeB)) dyes. The crystal growth of the ZIF-8 crystals takes place via an intermediate phase of zinc hydroxyl nitrate (Zn₅(OH)₈(NO₃)₂) nanosheets that enabled the adsorption of the target molecules i.e., RhB, MB, and MeB into their layers. The dye molecules play a role during crystal formation. The successful encapsulation of the dye molecules was proved via diffuse reflectance spectroscopy (DRS) and electrochemical measurements e.g., cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS). The materials were investigated for carbon dioxide (CO₂) adsorption and adenosine triphosphate (ATP) biosensing. ZIF-8, RhB@ZIF-8, MB@ZIF-8, and MeB@ZIF-8 offered CO₂ adsorption capacities of 0.80, 0.84, 0.85, and 0.53 mmol g^-1, respectively. The encapsulated cationic molecules improved the adsorption performance compared to anionic molecules inside the crystal. The materials were also tested as a fluorescent probe for ATP biosensing. The simple synthesis procedure offered new materials with tunable surface properties and the potential for multi-functional applications.

An abiotic carbon dots@ ZIF-90 fluorescent probe for rapid and reliable detection of adenosine triphosphate

ATP is a high-energy compound that plays a vital role in biological metabolism. Abnormal changes in ATP concentration are related to various diseases and reflect microbial metabolism in biofilms. In this work, we prepared carbon quantum dots (CDs) with aggregation-induced fluorescence inhibition effect using the bacterial culture medium as raw material with a hydrothermal method. Then, an abiotic fluorescent nanoprobe named CDs@zeolitic imidazolate frameworks-90 (ZIF-90) was facilely synthesized by encapsulating CDs into ZIF-90. Owing to the encapsulation of CDs in the hollow structure of ZIF-90, the blue fluorescence emission of CDs@ZIF-90 decreased significantly. In the presence of ATP, the ZIF-90 framework was destroyed due to the strong coordination between ATP and Zn²⁺. The released CDs exhibited stronger fluorescence intensity, which was closely related to the ATP concentration. The convenient synthesis process and rapid ATP-responsive ability make CDs@ZIF-90 highly promising for clinical and environmental analysis.

Selective and ratiometric fluorescence sensing of bisphenol A in canned food based on portable fluorescent test strips

In this study, a conversion method and molecular imprinting technology were used to design molecularly imprinted polymers (MIP)-based ratiometric fluorescence test papers. The ZnO quantum dots (ZnO QDs) acted as the background quantum dots and ZIF-8 raw material. Carbon dots (CDs) were used as the identification signals. The imprinting layer achieved a selective function. Therefore, a ZnO@ZIF-8/CDs@MIPs sensor was designed for the detection of Bisphenol A (BPA). The sensor exhibited a fast response time for BPA detection. In addition, the sensor demonstrated that effective detection of BPA can still be achieved in complex environments. The detection limit of this sensor was 0.778 nM with a linear range of 0-60 nM. The corresponding test solutions exhibited clear changes from blue to yellow. The selectivity experiments results demonstrated that ZnO@ZIF-8/CDs@MIPs only exhibit excellent selective recognition effect for BPA. ZnO@ZIF-8/CDs@MIPs-2 was used for the detection of BPA in canned food and compared with the results of HPLC detection of BPA. The two spiked recovery ranges were 96.58-102.04% and 97.43-103.82%, respectively. In addition, the prepared ZnO@ZIF-8/CDs@MIPs-2 test paper visually recognized BPA under ultraviolet light. This study provides guidelines for the design and application of fluorescent test papers for quick detection in practical applications.

A ratiometric fluorescent sensor for the detection of phosphate

Over the past few years, ratiometric fluorescent nanoprobes have garnered substantial interest because of their self-calibration characteristics. This research developed a ratiometric fluorescent sensor to detect phosphate. Through encapsulating luminescent materials, gold nanoclusters (AuNCs) and carbon dots (CDs) into a zeolitic imidazolate framework-8 (ZIF-8), the fluorescence signal of AuNCs was enhanced, while that of CDs was suppressed. After phosphate was added, it could decompose ZIF-8, and AuNCs and CDs were released, which weakened the fluorescence signal of the AuNCs while restoring that of the CDs. Thereby, this makes CDs/AuNCs@ZIF-8 a potential fluorescent sensor for phosphate determination. The ratiometric sensor had facile synthesis, good selectivity, and a low detection limit. Therefore, this sensor was an effective tool for the detection of phosphate.

Recent research progress in CDs@MOFs composites: fabrication, property modulation, and application

Carbon dots (CDs) have exhibited a promising application prospect in many fields because of their good fluorescence properties, biocompatibility, low toxicity, and easy functionalization. In order to improve their photoelectricity and stability, metal-organic frameworks (MOFs) can be used as host materials to provide ideal carriers for CDs to realize the multifunctional composites of CDs and MOFs (CDs@MOFs). At present, CDs@MOFs composites have shown tremendous application potential because they have various advantages of both CDs and MOFs. In this review, the synthesis methods of CDs@MOFs composites are firstly introduced. Then, the influence of the synergy between CDs and MOFs on the regulation of their structures and optical properties is highlighted. Furthermore, the recent application researches of CDs@MOFs composites in fluorescent probes, solid-state lighting, and photoelectrocatalysis are generalized. Finally, the critical issues, challenges, and solutions on their structure and property regulation and application are put forward, and their commercialization direction is also prospected.

A new NCDs@ZIF-90-based sensor: fluorescent "turn-on" detection of Al3+ ions with high selectivity and sensitivity

A new NCDs@ZIF-90 composite as fluorescence sensor was designed and prepared by encapsulation of N-doped carbon dots (NCDs) in metal-organic framework (MOF) ZIF-90 in one-pot synthesis. NCDs@ZIF-90 retained the crystal structure and high thermal stability of ZIF-90; meanwhile, it also displayed the good chemical stability. NCDs@ZIF-90 dispersion in ethanol exhibited selective "turn-on" fluorescence response towards Al³⁺. The other coexisting competing metal ions had no obvious influence on the sensing performance of NCDs@ZIF-90 for Al³⁺. The fluorescence intensity at 447 nm of NCDs@ZIF-90 dispersion in ethanol had good linear relation with the concentrations of Al³⁺ with a low detection limit of 3.196 μM. The fluorescence enhancement after the addition of Al³⁺ was attributed to the release of NCDs from the inside of ZIF-90 to ethanol solution. In addition, NCDs@ZIF-90 displayed good recovery in detection of Al³⁺ in water samples indicating its practical application capability. The high selectivity and sensitivity indicate that NCDs@ZIF-90 is a good candidate as a "turn-on" fluorescence chemosensor to identify and detect Al³⁺.

A facile COF loaded-molybdate resonance Rayleigh scattering and fluorescence dimode probe for determination of trace PO43

A new covalent organic framework loaded-molybdate (COF_Mo) nanomaterial was prepared simply by solvothermal procedure and characterized by electron microscopy and molecular spectral techniques. The COF_Mo had a strong resonance Rayleigh scattering (RRS) signal at 465 nm and a fluorescence peak at 345 nm. When the PO₄^3- was added in the system, it reacted with the molybdate, which loaded on the surface of COF particles, to form stable phosphomolybdic acid occurring RRS/fluorescence-energy transfer, the RRS and fluorescence signals were decreased. The decreased RRS/fluorescence intensities were linear to the PO₄^3- concentration in the range of 0.053-3.2 nmol/L and 0.10-3.2 nmol/L, with a detection limit of 0.050 nmol/L and 0.090 nmol/L respectively. Accordingly, a new and facile RRS/fluorescence dimode method for detection of trace PO₄^3- was established, only one fluorometer was used.

L-histidine functionalized ZiF-8 with aggregation-induced emission for detection of tetracycline

In this study, we constructed zinc based metal-organic framework functionalized by L-histidine (His@ZiF-8). The His@ZiF-8 had high porosity, large surface area, abundant carboxyl and amino group, which has been found to greatly enhance the aggregation-induced emission (AIE) of tetracycline (TC). After the His@ZiF-8 enrichment with TC, the TC exhibited strong fluorescence emission peak at 565 nm based on AIE. Under the optimal conditions, the fluorescence intensity of TC exhibited a good linear relationship with TC concentration within 0.1-80 μM with a low limit of detection of 28.6 nM. Antibiotic analogs such as neomycin, chloramphenico, ampicillin, kanamycin, and erythromycin have no obvious interference. In addition, the developed method was successfully used to the detection of TC in milk, river water, and honey.

New Approach to Generate Ratiometric Signals on Immunochromatographic Strips for Small Molecules

The self-calibration capability of ratiometric signals has been widely considered to enhance the accuracy, sensitivity, and anti-interference ability of immunoassays. Exploring a new approach to generate ratiometric signals can provide more options for various requirements. Herein, we integrated the negative-readout competitive and positive-readout noncompetitive immunoassays into a single assay by employing different color tracers, labeled peptidomimetic and anti-immunocomplex peptides, to create a new unconstrained ratiometric signal approach. Using an immunochromatographic strip (ICS) and a fungicide benzothiostrobin as the analytical platform and analyte, respectively, we showed that this approach can be extensively applied to fluorescence and colorimetry readouts, which have also been proven for strong anti-interference ability to an external light environment. Moreover, the enormous intuitional color changes of ratiometric fluorescent and colorimetric ICSs (RFICS and RCICS) enabled the formation of the color reference cards (like the pH paper) for visual judgment. After adaptation with a portable smartphone, the quantitative detection limits for RFICS and RCICS were 0.17 and 0.44 ng mL^-1, respectively. In addition, the ICSs showed good accuracy for the detection of benzothiostrobin in spiked samples.

A ratiometric sensor for selective detection of Hg2+ ions by combining second-order scattering and fluorescence signals of MIL-68(In)-NH2

Ratio fluorescence has attracted much attention because of its self-calibration properties. However, it is difficult to obtain suitable fluorescent materials with well-resolved signals simultaneously under one excitation. In this work, we report a different strategy, using MIL-68(In)-NH₂ as both the fluorescence element and the scattered light unit, and coupling the fluorescence and the scattered light to construct the fluorescence and scattered light ratio system. Based on the optical properties and the second-order scattering (SOS) of the material nanoparticles, the synthesized MIL-68(In)-NH₂ can be used to realize the ratio detection of Hg²⁺. Because the scattering intensity of small particle MIL-68(In)-NH₂ is weak, SOS is not obvious. When Hg²⁺ is introduced the coordination reaction between the amino nitrogen atoms of MIL-68(In)-NH₂ and Hg²⁺ make the particles larger, resulting in the decrease of fluorescence and the enhancement of SOS. As a result, a novel Hg²⁺ ratiometric detection method is developed by using the dual signal responses of the fluorescence and scattering. Under the optimal conditions (pH = 6, reaction time 5 min, room temperature, and the maximum excitation wavelength 365 nm), the linear range of the method is 0-100 μM, and the detection limit is 5.8 nM (Ksv = 9.89 × 10⁹ M^-1). In addition, the probe is successfully used to evaluate Hg²⁺ in actual water samples. Compared with the traditional method of recording only the fluorescence signal, the proposed fluorescence-scattering method provides a new strategy for the design of ratiometric sensors.

A ratiometric fluorescence-scattering sensor for rapid, sensitive and selective detection of doxycycline in animal foodstuffs

The residue problem of tetracycline antibiotics, especially doxycycline (DC), in animal foodstuffs has attracted much attention. This paper reported ZIF-8 and bovine serum albumin (BSA) as a ratiometric fluorescence-scattering sensor for DC. The mechanism relied on the disassembly of ZIF-8 caused by DC, bringing weakened second-order scattering, and the double fluorescence amplification of DC under ZIF-8 with BSA, inducing enhanced fluorescence. The response of the sensor was completed within 1 min, and the detection limit for DC (3.4 nM) was 1-2 orders of magnitude lower than the reported ones. The distinguishment of DC from other tetracycline antibiotics was also achieved by the sensor. The sensor was applied to detecting DC in animal foodstuffs with satisfactory recoveries (80.0-104.0%). Hence, this work develops a rapid, sensitive and selective ratiometric sensor to monitor the DC residue in animal foodstuffs, also opens the window to construct ratiometric DC sensors with the fluorescence-scattering strategy.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

Reusable and pH-Stable Luminescent Sensors for Highly Selective Detection of Phosphate

Phosphate sensors have been actively studied owing to their importance in water environment monitoring because phosphate is one of the nutrients that result in algal blooms. As with other nutrients, seamless monitoring of phosphate is important for understanding and evaluating eutrophication. However, field-deployable phosphate sensors have not been well developed yet due to the chemical characteristics of phosphate. In this paper, we report on a luminescent coordination polymer particle (CPP) that can respond selectively and sensitively to a phosphate ion against other ions in an aquatic ecosystem. The CPPs with an average size of 88.1 ± 12.2 nm are embedded into membranes for reusable purpose. Due to the specific binding of phosphates to europium ions, the luminescence quenching behavior of CPPs embedded into membranes shows a linear relationship with phosphate concentrations (3-500 μM) and detection limit of 1.52 μM. Consistent luminescence signals were also observed during repeated measurements in the pH range of 3-10. Moreover, the practical application was confirmed by sensing phosphate in actual environmental samples such as tap water and lake water.

Disposable paper-based PET fluorescence probe linked with calix[4]arene for lithium and phosphate ion detection

As a part of our ongoing research, we have synthesized a new fluorescence probe, p-C4A, based on a calix[4]arene substituted with 4-aminoquinoline moieties with amide linkages for lithium and phosphate ions.

An electrochemiluminescence dual “turn-on” strategy for alkaline phosphatase detection using a dual quenching Ru(bpy)32+ encapsulated zeolite imidazole metal organic framework

An electrochemiluminescence (ECL) dual “turn-on” strategy is first designed to detect alkaline phosphatase (ALP) using a dual quenching Ru(bpy)32+ encapsulated zeolite imidazole metal organic framework (Ru(bpy)32+@ZIF-90).

Dye-functionalized metal-organic frameworks with the uniform dispersion of MnO2 nanosheets for visualized fluorescence detection of alanine aminotransferase

The wide applications of metal-organic framework (MOF) luminescent materials in the field of optics have attracted the general attention of researchers. Therefore, the development of simple and multifunctional MOF light-emitting platforms have become a research hotspot. The composites (MnO2@ZIF-8-luminol) were prepared by an in situ synthesis method and room-temperature covalent reaction. The composites and o-phenylenediamine (OPD) constitute a dual emission sensor for detecting alanine aminotransferase (ALT). OPD can be oxidized by MnO₂ to 2,3-diaminophenazine (DAP) with yellow fluorescence emission, which inhibits the blue emission of luminol through fluorescence resonance energy transfer (FRET). The presence of tiopronin (TP) will destroy the FRET process, extinguishing the yellow fluorescence emission and restoring the blue fluorescence emission. The special effect between ALT and TP will further reverse the changes in the two fluorescent signals. Moreover, in the detection process, when the blue and yellow fluorescence energies in the system are within a certain range, a new white light emission will be generated, which causes the sensing of ALT to present ternary visualization. In addition, a high-security anti-counterfeiting platform is constructed by using the prepared materials and agarose hydrogels. The anti-counterfeiting platform can encrypt information on demand according to the luminous characteristics of different materials. This study not only provides a typical case of ternary visualization sensing by MOF-based materials but also develops a possible method for the construction of a MOF-based hydrogel anti-counterfeiting platform.

Innovative ratiometric optical strategy: Nonconjugated polymer dots based fluorescence-scattering dual signal output for sensing mercury ions

A new ratiometric platform was developed for sensing Hg²⁺, which combined fluorescence and scattering simultaneously. This ratiometric strategy reflected superiorities over conventional methods, since the two independent signals at irrelevant categories meet the requirements of sufficient wavelength separation, stimulation under one excitation, and collection on single instrument. Herein, nonconjugated polymer dots (N-PDs) were served as the recognition unit for Hg²⁺ with turn-off fluorescence and turn-on scattering. Additionally, two signal collection tactics were proposed to achieve fluorescence and scattering in a window: one was to record down-conversion fluorescence and second-order scattering spectra (FL@SOS), and the other was to gather the fluorescence excited by second-order diffraction light and first-order scattering (SODL-FL@FOS). This ratiometric sensor exhibited outstanding performance toward Hg²⁺ in the range of 0.1-50 μM with the detection limit of 27 nM. By contrast, the present proposal provided a more ingenious and scalable way to construct ratiometric sensor than traditional approach.

Ratiometric fluorescent sensing for phosphate based on Eu/Ce/UiO-66-(COOH)2 nanoprobe

The sensing of phosphate anion (PO₄^3-) is an important subject for human health and environmental monitoring. Herein, a unique ratiometric fluorescent nanoprobe based on postsynthetic modification of metal-organic frameworks (MOF) UiO-66-(COOH)₂ with Eu³⁺ and Ce³⁺ ions toward PO₄^3- was proposed (designated as Eu/Ce/Uio-66-(COOH)₂). The Eu/Ce/Uio-66-(COOH)₂ nanoprobe exhibits three emission peaks at 377 nm, 509 nm, and 621 nm with the single excitation wavelength at 250 nm, respectively. The strong coordinating interaction between Ce³⁺ and O atoms in the PO₄^3- group can result in the fluorescence quenching at 377 nm, while the fluorescence of 621 nm almost remains unchanged. Such a useful phenomenon is exploited for the construction of a ratiometric fluorescence platform for the detection of PO₄^3-. The assay exhibited a good linear response in the 0.3-20 μM concentration range with the detection limit of 0.247 μM. In addition, this ratiometric fluorescent sensing method not only can be applied to read out PO₄^3- concentration in real water samples, but also shows higher sensitivity, easier preparation and sensing procedures than other detection strategies.

Enzymatic Behavior Regulation-Based Colorimetric and Electrochemiluminescence Sensing of Phosphate Using the Cobalt Oxyhydroxide Nanosheet

In this work, a convenient and flexible assay for colorimetric and electrochemiluminescence (ECL) sensing of phosphate was proposed based on the enzymatic behavior regulation of the cobalt oxyhydroxide (CoOOH) nanosheet. CoOOH as a novel nanoenzyme exhibited a peroxidase-like activity, which could catalyze different substrates such as 2, 2'-azinobis-3-ethylbenzthiazoline-6-sulfonate (ABTS) and 4-chloro-1-naphthol (4-CN) with hydrogen peroxide (H₂O₂) as the electron acceptor. Phosphate could specifically regulate the enzymatic behavior of the CoOOH nanosheet via the deactivating effect. A high level of phosphate enabled a weak color change of ABTS, which offered a "turn-off" model of the colorimetric assay with a limit of detection of 0.673 μM. Based on the similar enzymatic behavior, this strategy could then be applied in the ECL assay utilizing l-arginine-6-aza-2-thiothymine-protected gold nanoclusters (Arg-ATT-AuNCs) as ECL signal indicators. Specifically, 4-CN was catalyzed to generate the precipitate and lead to the quenching on ECL emission. Different from colorimetric behavior, phosphate with a high concentration could induce strong ECL performance, which enabled the "turn-on" model of the ECL assay with a more sensitive determination down to 0.434 nM. This flexible enzymatic behavior regulation could then allow the phosphate measurement in environmental samples including tap water and river water with satisfactory accuracy, which holds the potential in the field of environmental protection.

Ratiometric fluorescence for sensitive detection of phosphate species based on mixed lanthanide metal organic framework

Phosphate (PO₄^3-) plays a major role in aquatic ecosystems and biosystems. Developing a highly sensitive and selective ratiometric fluorescence probe for detection of PO₄^3- is of great significance to the ecological environment and human health. In this work, a novel dual lanthanide metal organic framework was synthesized via hydrothermal reaction based on Tb³⁺ and Ce³⁺ as the center metal ions and terephthalic acid as the organic ligand (designated as Tb-Ce-MOFs). The fluorescence of Tb-Ce-MOFs shows emission at 375 nm. In the presence of PO₄^3-, with increased concentration of PO₄^3-, the fluorescence intensity of Tb-Ce-MOFs at 500 nm and 550 nm increased, while the intensity at 375 nm was reduced. Hence, ratiometric fluorescence detecting of PO₄^3- can be achieved by measuring the ratio of fluorescence at 550 nm (FL₅₅₀) to 375 nm (FL₃₇₅) in the fluorescent spectra of the Tb-Ce-MOFs. In this sensing approach, the Tb-Ce-MOFs probe exhibits highly sensitive and selective for detection of PO₄^3-. The limit of detection is calculated to be 28 nM and the detection range is 0.1 to 10 μM. In addition, the Tb-Ce-MOFs were used in the detection of PO₄^3- in real samples. We design and synthesize a mixed lanthanide metal organic framework fluorescence probe (Tb-Ce-MOFs) for ratiometric fluorescence for the detection of PO₄^3- based on Tb³⁺ and Ce³⁺ as the center metal ions and terephthalic acid as the organic ligand.

Recent advances in the construction and analytical applications of carbon dots-based optical nanoassembly

Recently, more and more attention has been focused on the construction and analytical applications of optical nanoassembly through combining carbon dots (CDs) with various other functional nanomaterials. The rational design and manufacture of CDs-based optical nanoassembly will be critical to meeting the needs of analytical science. The last decade has witnessed the immense potential of CDs-based optical nanoassembly in multiple sensing applications owing to their controlled optical properties, adjustable surface chemistry and microscopic morphology. This feature article collects the recent advances in the research and development of CDs-based optical nanoassembly and their applications in analytical sensors, aiming to provide vital insights and suggestions to inspire their broad sensing applications.