Schiff Base Aggregation-Induced Emission Luminogens for Sensing Applications: A Review

High-throughput fluorescence sensing array based on tetraphenylethylene derivatives for detecting and distinguishing pathogenic microbes

Infections induced by pathogenic microorganisms will bring negative effects such as diseases that damage health and result in heavy economic burden. Therefore, it is very important to detect and identify the pathogens in time. Moreover, traditional clinical diagnosis or food testing often faces the problem of dealing with a large number of samples. Here, we designed a high-throughput fluorescent sensor array based on the different binding ability of five tetraphenylethylene derivatives (TPEs) with various side chains to different kinds of pathogenic microbes, which is used to detect and distinguish various species, so as to realize rapid mass diagnosis, and hopefully provide guidance for further determination of microbial infections and clinical treatment.

Dicyanopyridine derivatives: One-pot preparation, ACQ-to-AIE transformation, light-conversion quality and photostability

Low cost and strong fluorescence emission are two important guarantees for luminogens used as light conversion agents. By one-pot multicomponent approach and inexpensive starting materials, three dicyanopyridine (DP) derivatives named as DCP (2-amino-6-methoxy-4-phenylpyridine-3,5-dicarbonitrile), DCO (2-amino-6-methoxy-4-(4-methoxyphenyl) pyridine-3,5-dicarbonitrile) and DCC (2-amino-4-(4-cyanophenyl)-6-methoxypyridine-3,5-dicarbonitrile) were designed and synthesized. Meanwhile, the ACQ-to-AIE transformation was successfully realized by altering substituent groups rather than traditional rotor-stator theory. Based on crystal analysis and theoretical calculations, the ACQ-to-AIE transformation is attributed to the tunable stacking modes and intermolecular weak interactions. Owing to matched fluorescence emission, low lost, high yield, and AIE activity, DCC is used as light conversion agents and doped in EVA matrix. The light conversion quality confirms that DCC can not only convert ultraviolet light, but also significantly improve the transmittance of 25 %/40 % EVA, whose photosynthetic photon flux density at 400-500 nm and 600-700 nm increased to 30.67 %/30.21 % and 25.37 %/37.82 % of the blank film, respectively. After 20 h of UV irradiation (365 nm, 40 W), the fluorescence intensities of DCC films can maintain 92 % of the initial values, indicating good photostability in the doping films. This work not only provides an excellent and low-cost light conversion agent, but also has important significance for ACQ-to-AIE transformation of luminogens.

Fabrication of Large-Area Multi-Stimulus Responsive Thin Films via Interfacially Confined Irreversible Katritzky Reaction

Fabrication of large-area thin films through irreversible reactions remains a formidable task. This study reports a breakthrough strategy for in situ synthesis of large-area, free-standing, robust and multi-stimulus responsive thin films through a catalyst-free and irreversible Katritzky reaction at a liquid-liquid interface. The as resulted films are featured with adjustable thickness of 1-3 μm and an area up to 50 cm2. The thin films exhibit fast photo-mechanical motions (a response time of ca 0.1 s), vapor-mechanical motions, as well as photo-chromic and solvato-chromic behaviors. It was revealed that the reason behind the observable motions is proton transfer from the imine groups to the carbonyl structures within the film induced by photo- and/or dimethyl sulfoxide-stimulus. In addition, the films can harvest anionic radicals and the radicals as captured can be efficiently degraded under UV light illumination. This study provides a new strategy for fabricating smart thin films via interfacially confined irreversible Katritzky reaction.

A highly efficient, selective, reversible and ultra-sensitive fluorescence "Turn-ON" chemosensor for aluminium ions by a novel Schiff base

The synthesis of a Schiff base-based chemosensor, denoted as H6L, was accomplished through the condensation reaction of Isophthalohydrazide and 2,6-dihydroxybenzaldehyde in an ethanol solvent. The resulting compound was further characterized using 1H and 13C nuclear magnetic resonance (NMR) spectroscopy, as well as high-resolution mass spectrometry (HRMS). Extensive research has been conducted on several facets of metal sensing phenomena, revealing that the Schiff base H6L demonstrates discerning and expeditious fluorescence sensing characteristics specifically towards Al (III) in acetonitrile. The purported method detects Al (III) can be ascribed to the suppression of photo-induced electron transfer (PET) and the enhanced chelation-induced fluorescence (CHEF). The stoichiometry of metal-ligand complexes (2:1) was determined using Job's plots titrations, HRMS and subsequently confirmed using NMR titration studies. The H6L sensors demonstrated remarkable fluorescence sensing capabilities in acetonitrile, with a low detection limit (LOD) of 0.44 μM. This LOD is suitably low for the detection of Al3+, which is commonly found in many environmental and biological systems. Fluorescence lifetime measurement provides additional evidence of complexation of H6L with Al (III). The reversibility of the sensor was demonstrated through the introduction of pyrophosphate (PPi), which forms a complex with aluminium ions, thereby releasing the chemo sensor for subsequent utilization. The findings suggest that H6L has the potential to serve as a viable probe for the detection and identification of Al3+ ions.

Turning Non-Emissive Schiff Bases Into Aggregate Emitters

Schiff bases are a crucial component in various functional materials but often exhibit non-emissive behavior which significantly limits their potential applications as luminescent materials. However, traditional approaches to convert them into aggregate emitters often require intricate molecular design, tedious synthesis, and significant time and resource consumption. Herein, we present a cocrystallization-induced emission strategy that can transform non-emissive (hetero)aryl-substituted Schiff bases into green-yellow to yellow aggregate emitters via even simple grinding of a mixture of Schiff bases and 1,2,4,5-tetracyanobenzene (TCB) mixtures. The combined experimental and theoretical analysis revealed that the cocrystallization inhibits the C=N isomerization and promotes face-to-face π-π interaction, which restricts access to both the dark state and canonical intersection to ultimately induce emission. Furthermore, the induced emission enables the observation of solid-state molecular diffusion through fluorescence signals, advancing white light emission diodes, and notably, solution-processed organic light-emitting diodes based on cocrystal for the first time. This study not only highlights the potential of developing new C=N structural motifs for AIEgens but also could boost advancements in related structure motifs like C=C and N=N.

Copper(II) Driven Fluorescence switch-on Detection of Ovalbumin and GSH Using a Pyridoxal 5'-phosphate Derived Tetradentate Schiff Base and its Applications

The facile detection of glutathione (GSH) and ovalbumin (OVA) is of great importance in biological research. Herein, a tetradentate Schiff base N, N'-bis(pyridoxal-5-phosphate)-o-phenylenediamine (L) obtained by condensing two moles of pyridoxal 5'-phosphate (PLP) with one mole of 1,2-phenylenediamine was employed for the fluorescence switch-on detection of GSH and OVA. When excited at 389 nm, receptor L showed a weak emission at 454 nm in an aqueous medium. The addition of GSH to the solution of L caused a significant fluorescence enhancement at 454 nm. Amino acids (leucine, glycine, serine, tryptophan, homocysteine, alanine, methionine, arginine and proline) and albumins (bovine serum albumin and OVA) failed to alter the fluorescence profile of L. Receptor L can be applied to detect GSH down to 1.16 µM. However, the fluorescence emission of L was quenched upon the formation of the L-Cu2+ complex. The addition of GSH and OVA to the in-situ formed L-Cu2+ complex restored not only the fluorescence emission of L but also a noticeable fluorescence enhancement observed at 454 nm. The decomplexation of L-Cu2+, along with the interaction of L with GSH and OVA is expected to suppress the conformational flexibility of L that enhanced the fluorescent intensity at 454 nm. Using L-Cu2+ complex, the concentration of OVA and GSH can be detected down to 0.31 µM and 0.20 µM, respectively. Molecular docking and dynamics simulation were performed to analyze the binding mode, conformational flexibility and dynamic stability of the L-Cu2+-OVA complex. Finally, the analytical novelty of L-Cu2+ was examined by detecting GSH/OVA in real biological samples, such as human blood serum, urine, and egg white.

α-Cyanostilbene-based Molecule with the Synergistical Mechanisms of AIE, ESIPT and TICT: A New Schiff Base Probe for Selective Detection of Fe3+ and Reversible Response to HCl/NH3 Vapor

We designed and synthesized a new Schiff base probe, which incorporated the salicylaldehyde-analogue α-cyanostilbene and benzophenone hydrazone by the imine linkage. Its chemical structure was verified by FT-IR, MALDI-TOF-MS, HR-MS and 1H/13C NMR technologies. It could exhibit a red fluorescence based on the synergistical effects of aggregation-induce emission (AIE), excited-state intramolecular proton transfer (ESIPT) and twisted intramolecular charge-transfer (TICT) in the aggregation or solid states. Interestingly, the TLC-based test strip loaded with the target compound showed the reversible fluorescence response to amine/acid vapor and on-site visual fluorescence quenching response to Fe3+. In THF/water mixtures (fw = 90%, 10 µM, pH = 7.4), the detection limit (DL) and the binding constant (Ka) of the developed probe towards Fe3+ were evaluated as 5.50 × 10- 8 M and 1.69 × 105, respectively. The developed probe was successfully applied for the detection of Fe3+ with practical, reliable, and satisfying results.

Photophysical Analysis of Aggregation-Induced Emission (AIE) Luminogens Based on Triphenylamine and Thiophene: Insights into Emission Behavior in Solution and PMMA Films

Aggregation-Induced Emission (AIE) luminogens have garnered significant interest due to their distinctive applications in different applications. Among the diverse molecular architectures, those based on triphenylamine and thiophene hold prominence. However, a comprehensive understanding of the deactivation mechanism both in solution and films remains lacking. In this study, we synthesized and characterized spectroscopically two AIE luminogens: 5-(4-(bis(4-methoxyphenyl)amino)phenyl)thiophene-2-carbaldehyde (TTY) and 5'-(4-(bis(4-methoxyphenyl)amino)phenyl)-[2,2'-bithiophene]-5-carbaldehyde (TTO). Photophysical and theoretical analyses were conducted in both solution and PMMA films to understand the deactivation mechanism of TTY and TTO. In diluted solutions, the emission behavior of TTY and TTO is influenced by the solvent, and the deactivation of the excited state can occur via locally excited (LE) or twisted intramolecular charge transfer (TICT) state. In PMMA films, rotational and translational movements are constrained, necessitating emission solely from the LE state. Nevertheless, in the PMMA film, excimers-like structures form, resulting in the emergence of a longer wavelength band and a reduction in emission intensity. The zenith of emission intensity occurs when molecules are dispersed at higher concentrations within PMMA, effectively diminishing the likelihood of excimer-like formations. Luminescent Solar Concentrators (LSC) were fabricated to validate these findings, and the optical efficiency was studied at varying concentrations of luminogen and PMMA.

Fluorogen-Functionalized Mesoporous Silica Hybrid Sensing Materials: Applications in Cu2+ Detection

Since Cu2+ ions play a pivotal role in both ecosystems and human health, the development of a rapid and sensitive method for Cu2+ detection holds significant importance. Fluorescent mesoporous silica materials (FMSMs) have garnered considerable attention in the realm of chemical sensing, biosensing, and bioimaging due to their distinctive structure and easily functionalized surfaces. As a result, numerous Cu2+ sensors based on FMSMs have been devised and extensively applied in environmental and biological Cu2+ detection over the past few decades. This review centers on the recent advancements in the methodologies for preparing FMSMs, the mechanisms underlying sensing, and the applications of FMSMs-based sensors for Cu2+ detection. Lastly, we present and elucidate pertinent perspectives concerning FMSMs-based Cu2+ sensors.

Cd2+-Selective Fluorescence Enhancement of Bisquinoline Derivatives with 2-Aminoethanol Skeleton

The development of fluorescent Cd2+ sensors requires strict selectivity over Zn2+ because of the high availability of Zn2+ in the natural environment. In this paper, bisquinoline-based fluorescent sensors with a 2-aminoethanol backbone were investigated. The weak coordination ability of quinoline compared to well-studied pyridine is suitable for Cd2+ selectivity rather than Zn2+. In the presence of 3 equiv. of metal ions, TriMeO-N,O-BQMAE (N,O-bis(5,6,7-trimethoxy-2-quinolylmethyl)-2-methylaminoethanol (3)), as well as its N,N-isomer TriMeO-N,N-BQMAE (N,N-bis(5,6,7-trimethoxy-2-quinolylmethyl)-2-methoxyethylamine (6)), exhibits Cd2+-selective fluorescence enhancement over Zn2+ in DMF-HEPES buffer (1:1, 50 mM HEPES, 0.1 M KCl, pH = 7.5) (IZn/ICd = 26-34%), which has similar selectivity in comparison to the corresponding ethylenediamine derivative TriMeOBQDMEN (N,N'-bis(5,6,7-trimethoxy-2-quinolylmethyl)-N,N'-dimethylethylenediamine) under the same experimental condition (IZn/ICd = 24%). The fluorescence mechanisms of N,O- and N,N-isomers of BQMAE are quite different, judging from the fluorescence lifetimes of their metal complexes. The Cd2+ complex with TriMeO-N,O-BQMAE (3) exhibits a long fluorescence lifetime similar to that of TriMeOBQDMEN via intramolecular excimer emission, whereas the Cd2+ complex with TriMeO-N,N-BQMAE (6) exhibits a short lifetime from monomer emission.

A Simple Schiff Base Probe for Quintuplicate-Metal Analytes with Four Emission-Wavelength Responses

A versatile mono-Schiff compound consisting of o-aminobenzene-hydroxyjulolidine (ABJ-MS) has been easily synthesized using a one-step reaction. ABJ-MS displays four diverse fluorescence responses to the addition of Zn2+/Al3+/Fe3+/Ag+, with the maximum fluorescence emission at 530 nm undergoing a hypsochromic shift to 502/490/440/430 nm, synchronously with the discriminating fluorescence enhancement being 10.6/22.8/2.6/7.1-fold, respectively. However, the addition of Cu2+ into ABJ-MS leads to an opposite behavior, namely, fluorescence quenching. Meanwhile, ABJ-MS also displays distinct absorption changes after adding these five metal ions due to different binding affinities between them and ABJ-MS, which gives ABJ-MS quite a versatile detecting nature for Cu2+/Zn2+/Al3+/Fe3+/Ag+. Moreover, ABJ-MS can mimic a series of versatile AND/OR/INH-consisting logic circuits on the basis of the Cu2+/Zn2+/Al3+/Fe3+/Ag+-mediated diverse optical responses. These will endow the smart ABJ-MS molecule and potential applications in the multi-analysis chemosensory and molecular logic material fields.

Excitation dependent emissive multi stimuli responsive ESIPT organic luminogen for monitoring sea food freshness

Excited state intramolecular proton transfer (ESIPT) organic luminophores with excitation wavelength-dependent color tunability have drawn significant attention due to their exceptional photoluminescent properties in solution and solid state. A novel salicylaldehyde-based Schiff's base molecule, (E)-N'-(3,5-dibromo-2-hydroxybenzylidene)benzohydrazide (BHN) exhibited stimuli (excitation wavelength and pH) induced changes in fluorescence properties which was utilised for applications like trace level water sensing in organic solvents (THF, acetone and DMF), detection and quantification of biogenic amines and anticounterfeiting. In the solution state, BHN rendered a ratiometric detection and quantification of ammonia, diethylamine and trimethylamine, which is further supported by DFT studies. The photoluminescent response of BHN towards various biogenic amines was later utilised to monitor shrimp freshness. The investigation carried out highlights the potential versatility of ESIPT hydrazones, which renders multi stimuli responsive behaviour that can be utilised for water sensing, anticounterfeiting and the detection and quantification of biogenic amines.

Discriminative 'Turn-on' Detection of Al3+ and Ga3+ Ions as Well as Aspartic Acid by Two Fluorescent Chemosensors

In this work, two Schiff-base-based chemosensors L1 and L2 containing electron-rich quinoline and anthracene rings were designed. L1 is AIEE active in a MeOH-H₂O solvent system while formed aggregates as confirmed by the DLS measurements and fluorescence lifetime studies. The chemosensor L1 was used for the sensitive, selective, and reversible 'turn-on' detection of Al³⁺ and Ga³⁺ ions as well as Aspartic Acid (Asp). Chemosensor L2, an isomer of L1, was able to selectively detect Ga³⁺ ion even in the presence of Al³⁺ ions and thus was able to discriminate between the two ions. The binding mode of chemosensors with analytes was substantiated through a combination of ¹H NMR spectra, mass spectra, and DFT studies. The 'turn-on' nature of fluorescence sensing by the two chemosensors enabled the development of colorimetric detection, filter-paper-based test strips, and polystyrene film-based detection techniques.

'AIE + ESIPT' Active 2-hydroxy-naphthalene Hydrazone for the Fluorescence Turn-on Sensing of Al3

The aggregation-induced emission (AIE) behaviour of an easy-to-prepare Schiff base 2-hydroxy-naphthalene hydrazone (L) was explored in mixed DMSO/HEPES medium by selecting DMSO as a good solvent, whereas HEPES buffer (H₂O, 10 mM, pH 7.4) as a poor solvent. The weakly fluorescent L in pure DMSO showed a fluorescence enhancement at 532 nm upon increasing the fraction of HEPES above 70% because of the self-aggregation of L and excited state intramolecular proton transfer (ESIPT) process. The AIE luminogen (AIEgen) L was applied for the sensing of metal ions in HEPES buffer (5% DMSO, 10 mM, pH 7.4). Among the fourteen different metal ions (Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Mg²⁺, Fe³⁺, Fe²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Al³⁺, Cr³⁺), AIEgen L showed a selective fluorescence enhancement at 435 nm in the presence of Al³⁺ without disturbing the fluorescence intensity at 532 nm due to the chelation-enhanced fluorescence effect (CHEF). The detection limit of 20 nM was estimated by performing the fluorescence titration of AIEgen L with Al³⁺. The reversibility of the Al³⁺ selective AIEgen L was demonstrated by adding a strong chelating agent EDTA. Finally, the practical utility of AIEgen L was validated by quantifying Al³⁺ in river and tap water samples.

Biosensors for the Detection of Enzymes Based on Aggregation-Induced Emission

Enzymes play a critical role in most complex biochemical processes. Some of them can be regarded as biomarkers for disease diagnosis. Taking advantage of aggregation-induced emission (AIE)-based biosensors, a series of fluorogens with AIE characteristics (AIEgens) have been designed and synthesized for the detection and imaging of enzymes. In this work, we summarized the advances in AIEgens-based probes and sensing platforms for the fluorescent detection of enzymes, including proteases, phosphatases, glycosidases, cholinesterases, telomerase and others. The AIEgens involve organic dyes and metal nanoclusters. This work provides valuable references for the design of novel AIE-based sensing platforms.

Comprehensive Empirical Model of Substitution—Influence on Hydrogen Bonding in Aromatic Schiff Bases

In this work, over 500 structures of tri-ring aromatic Schiff bases with different substitution patterns were investigated to develop a unified description of the substituent effect on the intramolecular hydrogen bridge. Both proximal and distal effects were examined using Density Functional Theory (DFT) in the gas phase and with solvent reaction field (Polarizable Continuum Model (PCM) and water as the solvent). In order to investigate and characterize the non-covalent interactions, a topological analysis was performed using the Quantum Theory of Atoms In Molecules (QTAIM) theory and Non-Covalent Interactions (NCI) index. The obtained results were summarized as the generalized, empirical model of the composite substituent effect, assessed using an additional group of simple ring-based Schiff bases. The composite substituent effect has been divided into separate increments describing the different interactions of the hydrogen bridge and the substituent: the classical substituent effect, involving resonance and induction mediated through the ring, steric increment based on substituent proximity to the bridge elements, and distal increment, derived from substitution on the distal ring.