Graphene Quantum Dots Integrated in Ionophore-Based Fluorescent Nanosensors for Na+ and K

Ionophore-Based SERS Sensing for Electrolyte Cations

We present here a surface-enhanced Raman spectroscopy (SERS)-based platform for selectively detecting electrolyte cations. This platform facilitates the reorientation of the chromoionophore I (CHI) molecule positioned on the surface of silver nanoparticles, regulated by the targeted electrolyte cation within the ionophore-based ion-selective sensing framework. When exposed to the target ions, leading to deprotonation, the aromatic plane of the CHI molecule shifts from an endwise to an edgewise configuration on the SERS substrate surface. This reorientation improves the coupling of the induced dipole within the molecule and the induced electromagnetic field normal to the surface, leading to a heightened and more discernible SERS signal. Additionally, NMR data revealed a protonation-dependent conformational change in the CHI molecules. Upon protonation, the side chain of the CHI molecule extends away from its aromatic ring, whereas upon deprotonation, the carbon chain folds back and closely approaches the edge of the aromatic plane, further confirming this conclusion. Using Ca2+ and Na+ as examples, this method shows a detection limit of 0.1 μM for Ca2+ and 1 μM for Na+ with high selectivity. The successful application of the versatile and rapidly advancing SERS technique for electrolyte cation detection shows a promising pathway for enhancing current ion detection capabilities. As a preliminary demonstration, the total Ca2+ concentration in undiluted human serum was successfully determined, with common matrix interference effectively circumvented.

Comparative analysis of a bulk optode based on a valinomycin ionophore and a nano-optode in micelles with pluronic F-127 for the quantification of potassium in aqueous solutions

In this work, two types of optical sensors were prepared for the quantification of potassium: the bulk optode (BO) and nano-optode (NO). The BO was prepared using three main components: the ionophore valinomycin, the ion exchanger tetrakis(4-chlorophenyl) potassium borate (K-TCPB), and the chromoionophore ETH 5294 (CHI). The optimal composition was found to be in a ratio of [1 : 1 : 1]. The NO was prepared by miniaturizing the BO through sonication in surfactant Pluronic F-127. The working range for the linear calibration model of BO was from 10-6 to 1.0 M K+ with a LODBO = 0.31 μM, meanwhile for NO was from 10-4 to 1.0 M K+ with a LODNO = 30.3 μM. Both optodes were tested for selectivity towards K+ in the presence of alkaline and alkaline earth ions, with a selectivity coefficient > 1.0. Furthermore, precision and stability studies of BO and NO were performed for three levels of K+ concentrations, 10-6, 10-3, 1.0 M for BO and 10-4, 10-2, 1.0 M for NO, showing a good homogeneity of the NO in the whole concentration range. However, an excessive variability was obtained for BO at 1.0 M K+. Therefore, the NO represents a potential tool for quantification of K+.

Persistent Luminescence Nanosensors: A Generalized Optode-Based Platform for Autofluorescence-Free Sensing in Biological Systems

Fluorescent nanosensors have revolutionized diagnostics and our ability to monitor cellular dynamics. Yet, distinguishing sensor signals from autofluorescence remains a challenge. Here, we merged optode-based sensing with near-infrared-emitting ZnGa2O4:Cr3+ persistent luminescence nanoparticles (PLNPs) to create nanocomposites for autofluorescence-free "glow-in-the-dark" sensing. Hydrophobic modification and incorporation of the persistent luminescence nanoparticles into an optode-based nanoparticle core yielded persistent luminescence nanosensors (PLNs) for five analytes (K+, Na+, Ca2+, pH, and O2) via two distinct mechanisms. We demonstrated the viability of the PLNs by quantifying K+ in fetal bovine serum, calibrating the pH PLNs in the same, and ratiometrically monitoring O2 metabolism in cultures of Saccharomyces cerevisiae, all the while overcoming their respective autofluorescence signatures. This highly modular platform allows for facile tuning of the sensing functionality, optical properties, and surface chemistry and promises high signal-to-noise ratios in complex optical environments.

Fluorescence 'turn-off-on' assays for neomycin sulphate and K+ ions with orange-red fluorescent molybdenum nanoclusters

Fluorescent metal nanoclusters (MNCs) have found extensive application in recognizing molecular species. Here, orange-red fluorescent Arg-A. paniculata-MoNCs were synthesized using Andrographis paniculata leaf extract, arginine as a ligand, and MoCl5 as a metal precursor. The Arg-A. paniculata-MoNCs complex exhibited a quantum yield (QY) of 16.91% and excitation/emission wavelengths of 400/665 nm. The synthesized Arg-A. paniculata-MoNCs successfully acted as a probe for assaying neomycin sulphate (NS) via fluorescence turn-off and K+ ions via fluorescence turn-on mechanisms, respectively. Moreover, the developed probe was effectively used to develop a cellulose paper strip-based sensor for detection of NS and K+ ions. Arg-A. paniculata-MoNCs demonstrated great potential for sensing NS and K+ ions, with concentration ranges of 0.1-80 and 0.25-110 μM for NS and K+ ions, respectively. The as-synthesized Arg-A. paniculata-MoNCs efficiently detected NS and K+ ions in food and biofluid samples, respectively.

Fluorescent nano- and microparticles for sensing cellular microenvironment: past, present and future applications

The tumor microenvironment (TME) demonstrates distinct hallmarks, including acidosis, hypoxia, reactive oxygen species (ROS) generation, and altered ion fluxes, which are crucial targets for early cancer biomarker detection, tumor diagnosis, and therapeutic strategies. Various imaging and sensing techniques have been developed and employed in both research and clinical settings to visualize and monitor cellular and TME dynamics. Among these, ratiometric fluorescence-based sensors have emerged as powerful analytical tools, providing precise and sensitive insights into TME and enabling real-time detection and tracking of dynamic changes. In this comprehensive review, we discuss the latest advancements in ratiometric fluorescent probes designed for the optical mapping of pH, oxygen, ROS, ions, and biomarkers within the TME. We elucidate their structural designs and sensing mechanisms as well as their applications in in vitro and in vivo detection. Furthermore, we explore integrated sensing platforms that reveal the spatiotemporal behavior of complex tumor cultures, highlighting the potential of high-resolution imaging techniques combined with computational methods. This review aims to provide a solid foundation for understanding the current state of the art and the future potential of fluorescent nano- and microparticles in the field of cellular microenvironment sensing.

Synthesis of multicolor silver nanostructures for colorimetric sensing of metal ions (Cr3+, Hg2+ and K+) in industrial water and urine samples with different spectral characteristics

In this work, we have synthesized four different color (yellow, orange, green, and blue (multicolor)) silver nanostructures (AgNSs) by chemical reduction method where silver nitrate, sodium borohydride and hydrogen peroxide were used as reagents. The as-synthesized multicolor AgNSs were successfully functionalized with bovine serum albumin (BSA) and applied as a colorimetric sensor for the assaying of metal cations (Cr³⁺, Hg²⁺, and K⁺). The addition of metal ions (Cr³⁺, Hg²⁺, and K⁺) into BSA functionalized AgNSs (BSA-AgNSs) causes the aggregation of BSA-AgNSs, and are accompanied by visual color changes with red or blue shift in the surface plasmon resonance (SPR) band of BSA-AgNSs. The BSA-AgNSs show different SPR characteristic for each metal ions (Cr³⁺, Hg²⁺, and K⁺) with exhibiting different spectral shift and color change. The yellow color BSA-AgNSs (Y-BSA-AgNSs) act as a probe for sensing Cr³⁺, orange color BSA-AgNSs (O-BSA-AgNSs) act as probe for Hg²⁺ ion assay, green color BSA-AgNSs (G-BSA-AgNSs) act as a probe for the assaying of both K⁺ and Hg²⁺, and blue color BSA-AgNSs (B-BSA-AgNSs) act as a sensor for colorimetric detection of K⁺ ion. The detection limits were found to be 0.26 μM for Cr³⁺ (Y-BSA-AgNSs), 0.14 μM for Hg²⁺ (O-BSA-AgNSs), 0.05 μM for K⁺ (G-BSA-AgNSs), 0.17 μM for Hg²⁺ (G-BSA-AgNSs), and 0.08 μM for K⁺ (B-BSA-AgNSs), respectively. Furthermore, multicolor BSA-AgNSs were also applied for assaying of Cr³⁺, and Hg²⁺ in industrial water samples and K⁺ in urine sample.

Surface PEGylation of ionophore-based microspheres enables determination of serum sodium and potassium ion concentration under flow cytometry

We present here an ionophore-based ion-selective optode (ISO) platform to detect potassium and sodium concentrations in serum through flow cytometry. The ion-selective microsensors were based on polyethylene glycol (PEG)-modified polystyrene (PS) microspheres (PEG-PS). Ratiometric response curves were observed using peak channel fluorescence intensities for K⁺ (10^-6 M to 0.1 M) and Na⁺ (10^-4 M to 0.2 M) with sufficient selectivity for clinical diagnosis. Due to the matrix effect, proteins such as albumin and immunoglobulin caused an obvious increase in response for serum sample determination. To solve this problem, 4-arm PEG chains were covalently attached onto the surface of PS microspheres through a two-step reaction, which improved the stability and combated pollution of microspheres. As a preliminary application, potassium and sodium concentrations in human serums were successfully determined by the PEG-PS microsensors through flow cytometry.

Metal ion sensing with graphene quantum dots: detection of harmful contaminants and biorelevant species

Graphene quantum dots (GQDs) are attractive materials for use as highly selective and sensitive chemical sensors, owing to their simple preparation and affordability. GQDs have been successfully deployed as sensors for toxic metal ions, which is a significant issue due to the ever-increasing environmental contamination from agricultural and industrial activities. Despite the success of GQDs in this area, the mechanisms which underpin GQD-metal ion specificity are rarely explored. This lack of information can result in difficulties when attempting to replicate published procedures and can limit the judicious design of new highly selective GQD sensors. Furthermore, there is a dearth of GQD examples which selectively detect biologically relevant alkali and alkaline earth metals. This review will present the current state of GQDs as metal ion sensors for harmful contaminants, highlighting and discussing the discrepancies that exist in the proposed mechanisms regarding metal ion selectivity. The emerging field of GQD sensors for biorelevant metal ion species will also be reviewed, with a perspective to the future of this highly versatile material.

Perspective on fluorescence cell imaging with ionophore-based ion-selective nano-optodes

Inorganic ions are ubiquitous in all kinds of cells with highly dynamic spatial and temporal distribution. Taking advantage of different types of fluorescent probes, fluorescence microscopic imaging and quantitative analysis of ion concentrations in cells have rapidly advanced. A family of fluorescent nanoprobes based on ionophores has emerged in recent years with the potential to establish a unique platform for the analysis of common biological ions including Na+, K+, Ca2+, Cl-, and so on. This article aims at providing a retrospect and outlook of ionophore-based ion-selective nanoprobes and the applications in cell imaging.

Phase transfer of fatty acids into ultrasmall nanospheres for colorimetric detection of lipase and albumin

Colorimetric detection of fatty acids during biological interactions is extremely difficult since they are optically silent. Here, fatty acids are found to function as ion-exchangers in ultrasmall polymeric nanospheres to facilitate the protonation of chromoionophores, causing a vivid color change between red and blue. With an excellent detection limit of 1.8 μg mL^-1 for oleic acid, colorimetric assays for lipase and albumin are developed with quick response, high sensitivity, and low cost.

Synthesis, Applications, and Prospects of Graphene Quantum Dots: A Comprehensive Review

Graphene quantum dot (GQD) is one of the youngest superstars of the carbon family. Since its emergence in 2008, GQD has attracted a great deal of attention due to its unique optoelectrical properties. Non-zero bandgap, the ability to accommodate functional groups and dopants, excellent dispersibility, highly tunable properties, and biocompatibility are among the most important characteristics of GQDs. To date, GQDs have displayed significant momentum in numerous fields such as energy devices, catalysis, sensing, photodynamic and photothermal therapy, drug delivery, and bioimaging. As this field is rapidly evolving, there is a strong need to identify the emerging challenges of GQDs in recent advances, mainly because some novel applications and numerous innovations on the ease of synthesis of GQDs are not systematically reviewed in earlier studies. This feature article provides a comparative and balanced discussion of recent advances in synthesis, properties, and applications of GQDs. Besides, current challenges and future prospects of these emerging carbon-based nanomaterials are also highlighted. The outlook provided in this review points out that the future of GQD research is boundless, particularly if upcoming studies focus on the ease of purification and eco-friendly synthesis along with improving the photoluminescence quantum yield and production yield of GQDs.

Synthesis and characterization of MXene (Ti3C2Tx)/Iron oxide composite for ultrasensitive electrochemical detection of hydrogen peroxide

Due to the widespread usage of hydrogen peroxide (H₂O₂) in various consumer and industrial products (Examples: fuel cells and antibacterial agents), it became important to accurately detect H₂O₂ concentration in environmental, medical and food samples. Herein, titanium carbide Ti₃C₂T_x (MXene) was synthesized by using Ti, Al and C powders at high-temperature. Then, nanocrystalline iron oxide (α-Fe₂O₃) was obtained from a single solid-phase method. Using Ti₃C₂T_x and Fe₂O₃ powders, Ti₃C₂T_x-Fe₂O₃ nanocomposite was prepared by ultrasonication. As-synthesized, Ti₃C₂T_x-Fe₂O₃ composite had been characterized by UV-Visible (UV-Vis), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and Raman spectroscopy. The Fe₂O₃ nanoparticles (NPs) were decorated on the surface of Ti₃C₂T_x as observed by high resolution scanning electron microscopy (HR-SEM) and high resolution transmission electron microscopy (HR-TEM). The Ti₃C₂T_x nanosheets were formed with the average size of 400-500 nm. HR-SEM images of α-Fe₂O₃ showed that the coral-like particles with the average length ~5 μm were obtained_. The electrochemical properties of the individual (Ti₃C₂T_x and α-Fe₂O₃) and composite materials (Ti₃C₂T_x-Fe₂O₃) were investigated by cyclic voltammetry (CV). Ti₃C₂T_x-Fe₂O₃ nanocomposite modified electrode had exhibited potent electro-catalytic activity for H₂O₂ reduction by reducing the overpotential about 320 mV and a linear response was recorded from 10 nM to 1 μM H₂O₂. The optimization of various parameters such as material composition ratio, amount of catalyst, effects of pH, scan rate and interference effects with other biomolecules were carried out. In addition, the kinetic parameters such as rate constant, diffusion coefficient and the active surface area of the electrodes were calculated. Moreover, the Ti₃C₂T_x-Fe₂O₃ composite modified electrode was used successfully to detect H₂O₂ in food and urine samples. We believe that Ti₃C₂T_x-Fe₂O₃ composite based materials could be used for the fabrication of non-enzymatic H₂O₂ sensors for medical diagnosis, food safety and environmental monitoring applications.

One-Pot Synthesis of Bright Blue Luminescent N-Doped GQDs: Optical Properties and Cell Imaging

High fluorescent graphene quantum dots (GQDs) are promising in bioimaging and optoelectronics. In this paper, bright blue fluorescent N-doped GQDs were synthesized using a ultrasonic-assisted hydrothermal method. The morphology, structure, surface chemistry, optical properties, and stability subject to photo-bleaching, temperature, pH and preservation period for the N-GQDs were investigated in detail using various microscopy and spectroscopy techniques. The results showed that the N-GQDs possessed an average size of 2.65 nm, 3.57% N doping, and up to 54% quantum yield (QY). The photoluminescence (PL) spectra of the N-GQDs are excitation dependent when excited in the range of 300-370 nm and excitation independent in the range of 380-500 nm for the core and surface states emission. The N-GQDs showed excellent photo-bleaching resistance and superior photo-stability. At room temperature and in the pH range of 3-8, the fluorescence of the N-GQDs was almost invariable. The N-GQDs can be stably preserved for at least 40 days. The average decay lifetime of the N-GQDs was 2.653 ns, and the radiative and nonradiative decay rate constants were calculated to be 2.04 × 108 s-1 and 1.73 × 108 s-1, respectively. The PL mechanism was qualitatively explained. The N-GQDs was used for cell imaging, and it showed good results, implying great potential applications for bioimaging or biomarking.

Enzyme-responsive fluorescent nanoemulsion based on lipophilic dye liquid

An enzyme-responsive fluorescent nanoemulsion (NE) based on lipophilic dye liquid (LDL) was developed for alkaline phosphatase (ALP). The response mechanism of the NE involved enzymatic reactions and simultaneous extraction of anions. The LDL-based NE exhibited 3.8 times higher sensitivity than plasticizer-based conventional NE. Detection limit and response range were 2.7 (U L-1) and 5-50 (U L-1), respectively. The response time was reduced to less than half that of the LDL-based membrane.

Ionophore-Based Ion-Selective Nanospheres Based on Monomer-Dimer Conversion in the Near-Infrared Region

Here, we report ion-selective nanospheres with readout in the near-infrared (NIR) region in both fluorescence and absorbance modes. The nanospheres rely on an ionophore-mediated monomer-dimer conversion of an NIR transducer, DTTC. The DTTC monomer in the nanospheres emits fluorescence around 820 nm, while the dimer in the aqueous environment generates strong blue-shifted emission around 660 nm. With a lead ionophore, an unprecedented lower detection limit of 3 pM for Pb²⁺ was achieved, allowing us to determine Pb²⁺ levels in river water without diluting the sample. Also, the Cu²⁺-selective nanospheres showed a detection limit of 5 nM. Taking advantage of the biologically desired NIR window, blood potassium concentrations were also determined without a complicated sample pretreatment. The sensing process was explained with a theoretical model. The detection range was found finely adjustable by the amount of nanospheres used. Therefore, the nanospheres formed a highly selective, sensitive, versatile, and rapid analytical platform for metal-ion sensing.

Ion-selective polymer dots for photoelectrochemical detection of potassium ions

Potassium-selective polymer dots (K-Pdots) containing potassium ionophores were for the first time used for photoelectrochemical (PEC) analysis and yielded sensitive and specific detection of potassium ions. The successful PEC analysis using ion-selective Pdots underscored the effectiveness of the strategy deployed and suggested the potential universality of this strategy for the detection of metal ions, which should advance the development of PEC sensors in ion analysis.

A dual-fluorophore sensor approach for ratiometric fluorescence imaging of potassium in living cells

Potassium is the most abundant intracellular metal in the body, playing vital roles in regulating intracellular fluid volume, nutrient transport, and cell-to-cell communication through nerve and muscle contraction. On the other hand, aberrant alterations in K+ homeostasis contribute to a diverse array of diseases spanning cardiovascular and neurological disorders to diabetes to kidney disease to cancer. There is an unmet need for studies of K+ physiology and pathology owing to the large differences in intracellular versus extracellular K+ concentrations ([K+]intra = 150 mM, [K+]extra = 3-5 mM). With a relative dearth of methods to reliably measure dynamic changes in intracellular K+ in biological specimens that meet the dual challenges of low affinity and high selectivity for K+, particularly over Na+, currently available fluorescent K+ sensors are largely optimized with high-affinity receptors that are more amenable for extracellular K+ detection. We report the design, synthesis, and biological evaluation of Ratiometric Potassium Sensor 1 (RPS-1), a dual-fluorophore sensor that enables ratiometric fluorescence imaging of intracellular potassium in living systems. RPS-1 links a potassium-responsive fluorescent sensor fragment (PS525) with a low-affinity, high-selectivity crown ether receptor for K+ to a potassium-insensitive reference fluorophore (Coumarin 343) as an internal calibration standard through ester bonds. Upon intracellular delivery, esterase-directed cleavage splits these two dyes into separate fragments to enable ratiometric detection of K+. RPS-1 responds to K+ in aqueous buffer with high selectivity over competing metal ions and is sensitive to potassium ions at steady-state intracellular levels and can respond to decreases or increases from that basal set point. Moreover, RPS-1 was applied for comparative screening of K+ pools across a panel of different cancer cell lines, revealing elevations in basal intracellular K+ in metastatic breast cancer cell lines vs. normal breast cells. This work provides a unique chemical tool for the study of intracellular potassium dynamics and a starting point for the design of other ratiometric fluorescent sensors based on two-fluorophore approaches that do not rely on FRET or related energy transfer designs.

Applications of ion level nanosensors for neuroscience research

Ion activities are tightly associated with brain physiology, such as intracranial cell membrane potential, neural activity and neuropathology. Thus, monitoring the ion levels in the brain is of great significance in neuroscience research. Recently, nanosensors have emerged as powerful tools for monitoring brain ion levels and dynamics. With controllable structures and functions, nanosensors have been intensively used for monitoring neural activity and cell function and can be used in disease diagnosis. Here, we summarize the recent advances in the design and application of ion level nanosensors at different physiological levels, aiming to draw a connection of the interrelated intracranial ion activities. Furthermore, perspectives on the rationally designed ion level nanosensors in understanding the brain functions are highlighted.

Functional BOD-Ad-Cmyc@BSA complex nanosensor for Cu(II) and the detection of live E. coli

Escherichia coli (E. coli) is abundantly present in nature. It is generally harmless to humans but some strains have been deemed very dangerous. Therefore, as an indicator of hygienic testing, the detection of E. coli is essential. In this work, a fluorescent assembly was synthesized and characterized by spectroscopic methods. It was found that the amantadine (Ad) conjugated dye (BOD-Ad) intercalated into Cmyc G4 (aptamer) forming a non-emission assembly (BOD-Ad-Cmyc), which could be lighted-up by BSA due to the formation of fluorescence nanoparticle BOD-Ad-Cmyc@BSA. Further, BOD-Ad-Cmyc@BSA can selectively bind Cu²⁺ forming non-emission species BOD-Ad-Cmyc@BSA-Cu²⁺. E. coli can turn-on the emission of BOD-Ad-Cmyc@BSA-Cu²⁺ system due to the copper accumulation or reduction by E. coli. Therefore, a fluorescence method for the determination of E. coli was built. The detection limit of BOD-Ad-Cmyc@BSA-Cu²⁺ of E. coli is 6.3 CFU/mL. Thus, this BOD-Ad-Cmyc@BSA-Cu²⁺ fluorescent assembly can be used for the detection of live E. coli in the environment.

Ionophore-based pH independent detection of ions utilizing aggregation-induced effects

Ionophores have been integrated into various electrochemical and optical sensing platforms for the selective detection of ions. Previous ionophore-based optical sensors rely on a H⁺ chromoionophore as the signal transducer and consequently, suffered from a pH cross-response. pH independent methods were proposed very recently by utilizing the solvatochromic dyes or the exhaustive mode. Here, we report a pH independent sensing principle based on nanospheres containing ionophores. As the ion-exchange occurs, the signal transducer undergoes aggregation-induced emission (AIE) or aggregation-caused quenching (ACQ), leading to a dramatic change in fluorescence intensity. The principle was evaluated on different ionophores including those selective for K⁺, Na⁺, Ca²⁺, and Pb²⁺. The nanospheres were also introduced into microfluidic chips and successfully applied for the determination of sodium and potassium ion concentrations in diluted blood serum and urine samples.

Re-designing ferritin nanocages for mercuric ion detection

Protein nanocages have recently received considerable attention in the fields of nanoscience and nanomedicine and have been used as either biotemplates for the preparation of a variety of nanomaterials or vehicles for drugs or imaging agents. However, their utilization for detection of heavy metal ions has yet to be explored. In this study, by grafting a mercury binding peptide (MBP) on the exterior surface of a recombinant human H-chain ferritin (rHuHF) nanocage, we successfully prepared a new protein nanocage (HuHF-MBP) which exhibits high binding capacity and affinity for Hg2+. The fluorescence of HuHF-MBP labeled with a green fluorescent dye fluorescein isothiocyanate (FITC) can be quenched by graphene oxide (GO), while addition of Hg2+ to the above solution recovered the quenched fluorescence in a dose-dependent manner. Thus, this system consisting of FITC-labeled HuHF-MBP and GO, where FITC and graphene oxide were used as fluorescent reporter probes, has great potential to be explored as a sensor for Hg2+ detection. Indeed, this newly constructed protein sensor exhibited high sensitivity and selectivity for Hg2+, and the limit of detection was 1.0 nM. The construction of this system provides an alternative strategy for the preparation of heavy metal ion sensors by using protein nanocages as biotemplates.

Recent Advances on Graphene Quantum Dots: From Chemistry and Physics to Applications

Graphene quantum dots (GQDs) that are flat 0D nanomaterials have attracted increasing interest because of their exceptional chemicophysical properties and novel applications in energy conversion and storage, electro/photo/chemical catalysis, flexible devices, sensing, display, imaging, and theranostics. The significant advances in the recent years are summarized with comparative and balanced discussion. The differences between GQDs and other nanomaterials, including their nanocarbon cousins, are emphasized, and the unique advantages of GQDs for specific applications are highlighted. The current challenges and outlook of this growing field are also discussed.

Rhodamine dye transfer from hydrogel to nanospheres for the chemical detection of potassium ions

Smart hydrogels incorporating various functional nanomaterials are becoming popular tools for chemical sensing.