Measuring Bone Biomarker Alkaline Phosphatase with Wafer-Scale Nanowell Array Electrodes

Regenerative Strategy of Gold Electrodes for Long-Term Reuse of Electrochemical Biosensors

Gold is of considerable interest for electrochemical active surfaces because thiol-modified chemicals and biomolecules can be easily immobilized with a simple procedure. However, most gold surfaces are damaged with repetitive measurements, so they are difficult to reuse. Here we demonstrate a novel electrochemical cleaning method of gold surfaces to reuse electrodes with a simple protocol that is easy and nontoxic. This electrochemical cleaning consists of two steps by using different solutions. The 1st step is a cyclic voltammetry sweep using a very low concentration of sulfuric acid, and the 2nd step is a cyclic voltammetry sweep using potassium ferricyanide. Different cleaning methods were also considered for comparison. Consequently, after assembling and desorption of the cell and antigen, the changes in gold electrode performance, as immunosensor and cytosensor, were investigated by electrochemical impedance and cyclic voltammetry. It was found that repetitive measurement is possible until five times while maintaining the reproducibility. It is believed that this method is capable of enabling reuse of gold electrodes and can be used for long-term and accurate monitoring of biological effects, especially at a low cost.

Alkaline Phosphatase-Triggered Etching of Au@FeOOH Nanoparticles for Enzyme Level Assay under Dark-Field Microscopy

In clinical diagnosis, the level of biological enzymes in serum has been generally regarded as markers of human diseases. In this work, a kind of simple and sensitive plasmonic probe (indicated as Au@FeOOH) has been synthesized with the guidance of plasmonic imaging and subsequently developed for the alkaline phosphatase (ALP) level detection under dark-field microscopy (DFM). As a kind of hydrolysis enzyme, ALP can promote the hydrolysis of l-ascorbic acid 2-phosphate to ascorbic acid (AA). AA further acts as a strong reduction reagent for the decomposition of the FeOOH shell, which results in a blue shift of localized surface plasmon resonance spectra and an obvious color change under DFM. RGB analyses show that using a ΔR/G value instead of scattering wavelength or R/G value as the analytical signal, the deviation attributed to the size distribution of the initial Au NPs is greatly suppressed, and a linear range from 0.2 to 6.0 U/L (R² = 0.99) and a limit of detection of 0.06 U/L are acquired with various concentrations of ALP during the detection. Besides, this approach exhibits excellent selectivity in complex biological serum samples, which is expected to be applied for the early diagnosis of clinical diseases by monitoring various biomarkers in the future.

Highly sensitive detection for alkaline phosphatase using doped ZnS quantum dots with room temperature phosphorescence and its logic gate function

This paper presents a highly sensitive sensing system for alkaline phosphatase by room temperature phosphorescence of Mn doped ZnS quantum dots and pyrophosphate. The sensing system has intense room temperature phosphorescence emission in the absence of alkaline phosphatase. The phosphorescence is quenched gradually with the addition of alkaline phosphatase. The emission "on" without alkaline phosphatase may be attributed to the increased probability of charge transfer from one of surface traps to the dopant bands of another resulted from the shortened dot-to-dot distance by the strong chelation of pyrophosphate and Zn²⁺ ion and the hydrogen bonding between pyrophosphate and β-cyclodextrin. The addition of alkaline phosphatase causes pyrophosphate hydrolyzed to orthophosphate and the dot-to-dot distance of quantum dots back to the normal, and then the phosphorescence "off". The factors affecting the sensing system performance were also optimized. Under the optimal experimental conditions, the linear range for alkaline phosphatase is determined as 0.2-10 U/L with a LOD at 0.045 U/L. The recovery of human serum was determined from 93.75%-103.03%, indicating a potential application in biomedical diagnosis. Furthermore, an RTP-based "INHIBIT" logic gate using the doped ZnS quantum dots was also presented.

Elucidation and control of low and high active populations of alkaline phosphatase molecules for quantitative digital bioassay

Alkaline phosphatase (ALP), a homo‐dimeric enzyme has been widely used in various bioassays as disease markers and enzyme probes. Recent advancements of digital bioassay revolutionized ALP‐based diagnostic assays as seen in rapid growth of digital ELISA and the emerging multiplex profiling of single‐molecule ALP isomers. However, the intrinsic heterogeneity found among ALP molecules hampers the ALP‐based quantitative digital bioassays. This study aims quantitative analysis of single‐molecule activities of ALP from Escherichia coli and reveals the static heterogeneity in catalytic activity of ALP with two distinct populations: half‐active and fully‐active portions. Digital assays with serial buffer exchange uncovered single‐molecule Michaelis–Menten kinetics of ALP; half‐active molecules have halved values of the catalytic turnover rate, k_cat, and the rate constant of productive binding, k_on, of the fully active molecules. These findings suggest that half‐active ALP molecules are heterogenic dimers composed of inactive and active monomer units, while fully active ALP molecules comprise two active units. Static heterogeneity was also observed for ALP with other origins: calf intestine or shrimp, showing how the findings can be generalized across species. Cell‐free expression of ALP with disulfide bond enhancer and spiked zinc ion resulted in homogenous population of ALP of full activity, implying that inactive monomer units of ALP are deficient in correct disulfide bond formation and zinc ion coordination. These findings provide basis for further study on molecular mechanism and biogenesis of ALP, and also offer the way to prepare homogenous and active populations of ALP for highly quantitative and sensitive bioassays with ALP.

Single-step label-free nanowell immunoassay accurately quantifies serum stress hormones within minutes

A non-faradaic label-free cortisol sensing platform is presented using a nanowell array design, in which the two probe electrodes are integrated within the nanowell structure. Rapid and low volume (≤5 μl) sensing was realized through functionalizing nanoscale volume wells with antibodies and monitoring the real-time binding events. A 28-well plate biochip was built on a glass substrate by sequential deposition, patterning, and etching steps to create a stack nanowell array sensor with an electrode gap of 40 nm. Sensor response for cortisol concentrations between 1 and 15 μg/dl in buffer solution was recorded, and a limit of detection of 0.5 μg/dl was achieved. Last, 65 human serum samples were collected to compare the response from human serum samples with results from the standard enzyme-linked immunosorbent assay (ELISA). These results confirm that nanowell array sensors could be a promising platform for point-of-care testing, where real-time, laboratory-quality diagnostic results are essential.

In Situ Exsolution of Noble-Metal Nanoparticles on Perovskites as Enhanced Peroxidase Mimics for Bioanalysis

Various transition-metal oxide (TMO)-based nanomaterials have been explored as peroxidase mimics. However, the moderate peroxidase-like activity of TMOs limited their widespread use. Decorating highly active noble-metal nanozymes on the surface of TMOs can not only enhance the peroxidase-like activity of TMOs but also prevent the small-sized metal nanoparticles (NPs) from aggregation. Herein, in situ exsolution of noble-metal NPs (i.e., Ir and Ru) from A-site-deficient perovskite oxides (i.e., chemical formula La_0.9B_0.9B'_0.1O_3-δ, B = Mn/Fe, B' = Ir/Ru) under a reducing atmosphere was achieved for preparing noble-metal NPs/perovskite composites. The exsolved NPs were socketed on the surface of parent perovskite oxides, which significantly enhanced the stability of metal NPs. In addition, the peroxidase-like activity of perovskite oxides increased remarkably after NPs egress. We then used the optimized Ir/LMIO with high stability and excellent peroxidase-like activity to develop a colorimetric assay for the determination of alkaline phosphatase (ALP). Benefiting from the remarkable peroxidase-like activity of Ir/LMIO, the sensing platform exhibited a wide linear range. The practical application of the colorimetric sensing method was demonstrated by detecting the ALP in serum samples. This work not only provides new insights into the synthesis of highly active peroxidase-like nanozymes but expands their applications for constructing a high-performance biosensing platform.

Phosphate-responsive 2D-metal–organic-framework-nanozymes for colorimetric detection of alkaline phosphatase

Phosphate-responsive peroxidase-mimicking two-dimensional-metal–organic-framework nanozymes were employed to develop alkaline phosphatase assays with tunable dynamic ranges and colorimetric logic gates.