De Novo Biosynthesis of (S)- and (R)-Phenylethanediol in Yeast via Artificial Enzyme Cascades

Engineering Saccharomyces cerevisiae-based biosensors for copper detection

Heavy metals, that is Cu(II), are harmful to the environment. There is an increasing demand to develop inexpensive detection methods for heavy metals. Here, we developed a yeast biosensor with reduced‐noise and improved signal output for potential on‐site copper ion detection. The copper‐sensing circuit was achieved by employing a secondary genetic layer to control the galactose‐inducible (GAL) system in Saccharomyces cerevisiae. The reciprocal control of the Gal4 activator and Gal80 repressor under copper‐responsive promoters resulted in a low‐noise and sensitive yeast biosensor for copper ion detection. Furthermore, we developed a betaxanthin‐based colorimetric assay, as well as 2‐phenylethanol and styrene‐based olfactory outputs for the copper ion detection. Notably, our engineered yeast sensor confers a narrow range switch‐like behaviour, which can give a ‘yes/no’ response when coupled with a betaxanthin‐based visual phenotype. Taken together, we envision that the design principle established here might be applicable to develop other sensing systems for various chemical detections.

A low‐noise yeast biosensor was developed for copper detection. The yeast biosensor confers a switch‐like behavior with a “yes/no” response. The olfactory outputs for copper detection were also developed.

Engineering a Synthetic Pathway for Tyrosol Synthesis in Escherichia coli

Tyrosol is an aromatic compound with great value that is widely used in the food and pharmaceutical industry. In this study, we reported a synthetic pathway for converting p-coumaric acid (p-CA) into tyrosol in Escherichia coli. We found that the enzyme cascade comprising ferulic acid decarboxylase (FDC1) from Saccharomyces cerevisiae, styrene monooxygenase (SMO), styrene oxide isomerase (SOI) from Pseudomonas putida, and phenylacetaldehyde reductase (PAR) from Solanum lycopersicum could efficiently synthesize tyrosol from p-CA with a conversion rate over 90%. To further expand the range of substrates, we also introduced tyrosine ammonia-lyase (TAL) from Flavobacterium johnsoniae to connect the synthetic pathway with the endogenous l-tyrosine metabolism. We found that tyrosol could be efficiently produced from glycerol, reaching 545.51 mg/L tyrosol in a tyrosine-overproducing strain under shake flasks. In summary, we have established alternative routes for tyrosol synthesis from p-CA (a potential lignin-derived biomass), glucose, and glycerol.

Microbial synthesis of 4-hydroxybenzoic acid from renewable feedstocks

4-Hydroxybenzoic acid (4HBA) and its esterified forms can be used as preservatives in the pharmaceutical and food industries. Here, we reported the establishment of a coenzyme-A (CoA) free multi-enzyme cascade in Escherichia coli to utilize biobased _L-tyrosine for efficient synthesis of 4HBA. The multi-enzyme cascade contains _L-amino acid deaminase from Proteus mirabilis, hydroxymandelate synthase from Amycolatopsis orientalis, (S)-mandelate dehydrogenase and benzoylformate decarboxylase from Pseudomonas putida, and aldehyde dehydrogenase from Saccharomyces cerevisiae. The whole-cell biocatalysis afforded the synthesis of 128 ± 1 mM of 4HBA (17.7 ± 0.1 g/L) from 150 mM _L-tyrosine with > 85% conversion within 96 h. In addition, the artificial enzymatic cascade also allowed the synthesis of benzoic acid from 100 mM _L-phenylalanine with a conversion ∼ 90%. In summary, our research offers a sustainable alternative for synthesizing 4HBA and benzoic acid from renewable feedstocks.

New Set of Yeast Vectors for Shuttle Expression in Escherichia coli

Promoters that play an essential role in the gene regulation are of particular interest to the synthetic biology communities. Recent advances in high-throughput DNA sequencing have greatly increased the breadth of new genetic parts. The development of promoters with broad host properties could enable rapid phenotyping of genetic constructs in different hosts. In this study, we discovered that the GAL1/10 bidirectional promoter from Saccharomyces cerevisiae could be used for shuttle expression in Escherichia coli. Further investigation revealed that the GAL1/10 bidirectional promoter is subjected to catabolite repression in E. coli. We next constructed a set of Golden-Gate assembly vectors for shuttle expression between S. cerevisiae and E. coli. The utility of shuttle vectors was demonstrated for rapid phenotyping of a multigene pathway for cinnamyl alcohol production. Taken together, our work opens a new avenue for the future development of broad host expression systems between prokaryotic and eukaryotic hosts.

Utilization of a styrene-derived pathway for 2-phenylethanol production in budding yeast

2-Phenylethanol (2-PE) is an important flavor ingredient and is widely applied in the fields of food, cosmetics, and pharmaceuticals. Despite that Saccharomyces cerevisiae has the ability to naturally synthesize 2-PE via the Ehrlich pathway, de novo synthesis of 2-PE in high titer still remains a huge challenge. In this study, a non-native styrene degradation pathway was introduced into S. cerevisiae, which represents the first time to demonstrate the functional expression of "styrene-derived" 2-PE synthesis in yeast. Using a host strain engineered with L-phenylalanine (L-Phe) overproduction, the heterologous 2-PE pathway coupled with endogenous Ehrlich pathway produced 233 mg/L 2-PE under shake flasks. Additionally, we further engineered the permease transporters to improve the intracellular L-Phe availability, and further improved the 2-PE titer to 680 mg/L. Taken together, our work represents one of the pioneering reports to explore "styrene-derived" pathway in S. cerevisiae. The synthetic yeast described here might be used as a platform for the future development of next-generation high-yielding 2-PE yeast strains.Key Points• A styrene-derived pathway was established in yeast for 2-phenylethanol productions; membrane-associated styrene oxide isomerase was functional in yeast.• Transporter engineering to improve the L-phenylalanine importation with enhanced 2-phenylethanol productions.

Recent advances in artificial enzyme cascades for the production of value-added chemicals

Enzyme cascades are efficient tools to perform multi-step synthesis in one-pot in a green and sustainable manner, enabling non-natural synthesis of valuable chemicals from easily available substrates by artificially combining two or more enzymes. Bioproduction of many high-value chemicals such as chiral and highly functionalised molecules have been achieved by developing new enzyme cascades. This review summarizes recent advances on engineering and application of enzyme cascades to produce high-value chemicals (alcohols, aldehydes, ketones, amines, carboxylic acids, etc) from simple starting materials. While 2-step enzyme cascades are developed for versatile enantioselective synthesis, multi-step enzyme cascades are engineered to functionalise basic chemicals, such as styrenes, cyclic alkanes, and aromatic compounds. New cascade reactions have also been developed for producing valuable chemicals from bio-based substrates, such as ʟ-phenylalanine, and renewable feedstocks such as glucose and glycerol. The challenges in current process and future outlooks in the development of enzyme cascades are also addressed.

Fluorescent enzyme-coupled activity assay for phenylalanine ammonia-lyases

Phenylalanine ammonia-lyases (PALs) catalyse the non-oxidative deamination of l-phenylalanine to trans-cinnamic acid, while in the presence of high ammonia concentration the reverse reaction occurs. PALs have been intensively studied, however, their industrial applications for amino acids synthesis remained limited, mainly due to their decreased operational stability or limited substrate specificity. The application of extensive directed evolution procedures to improve their stability, activity or selectivity, is hindered by the lack of reliable activity assays allowing facile screening of PAL-activity within large-sized mutant libraries. Herein, we describe the development of an enzyme-coupled fluorescent assay applicable for PAL-activity screens at whole cell level, involving decarboxylation of trans-cinnamic acid (the product of the PAL reaction) by ferulic acid decarboxylase (FDC1) and a photochemical reaction of the produced styrene with a diaryltetrazole, that generates a detectable, fluorescent pyrazoline product. The general applicability of the fluorescent assay for PALs of different origin, as well as its versatility for the detection of tyrosine ammonia-lyase (TAL) activity have been also demonstrated. Accordingly, the developed procedure provides a facile tool for the efficient activity screens of large mutant libraries of PALs in presence of non-natural substrates of interest, being essential for the substrate-specificity modifications/tailoring of PALs through directed evolution-based protein engineering.

Asymmetric Epoxidation and Sulfoxidation Catalyzed by a New Styrene Monooxygenase from Bradyrhizobium

Asymmetric epoxidation catalyzed with styrene monooxygenase (SMO) is a powerful enzymatic process producing enantiopure styrene epoxide derivatives. To establish a more diversified reservoir of SMOs, a new SMO from Bradyrhizobium sp. ORS 375, named BrSMO, was mined from the database and characterized. BrSMO was constituted of an epoxygenase component of 415 amino acid residues and an NADH-dependent flavin reductase component of 175 residues. BrSMO catalyzed the epoxidation of styrene and 7 more styrene derivatives, yielding the corresponding (S)-epoxides with excellent enantiomeric excesses (95- > 99% ee), with the highest activity achieved for styrene. BrSMO also catalyzed the asymmetric sulfoxidation of 7 sulfides, producing the corresponding (R)-sulfoxides (20-90% ee) with good yields.