Ultrafine ZnO nanoparticles/nanowires synthesized on a flexible and transparent substrate: formation, water molecules, and surface defect effects

Hierarchical Ordered Mesoporous Sr2Bi4Ti5O18 Microflowers with Rich Oxygen Vacancies In Situ Assembled by Nanosheets for Piezo-Photocatalysis

The Aurivillius phase layered perovskite ferroelectric material Sr2Bi4Ti5O18 (SBTO) exhibits spontaneous polarization and piezoelectric properties, which confer significant potential for piezo-photocatalysis. Its ability to enhance electron-hole separation while providing excellent fatigue resistance positions it as a promising candidate in this field. Defects were introduced to improve the structural polarization and photoelectrochemical properties of SBTO. SBTO nanocrystals, featuring a mixed structure of hierarchically ordered mesoporous microflowers and nanosheets, were successfully synthesized via the hydrothermal method. The SBTO sample synthesized at a lower hydrothermal temperature displayed optimal oxygen vacancy concentration and exhibited superior piezoelectric-photo synergistic degradation activity for organic pollutants. Additionally, corona polarization increases the macroscopic polarization of the SBTO photocatalyst, promoting the separation of photogenerated carriers. Finite element simulations confirmed that a single flower-like SBTO structure generates a higher piezoelectric potential compared to a sheet-like morphology. In conclusion, integrating self-assembled hierarchical structure design, ferroelectric polarization, and defect engineering forms an effective strategy for achieving high-performance SBTO-based layered perovskite piezo-photocatalysts.

Piezo-Flexocatalysis of Single-Atom Pt-Loaded Graphitic Carbon Nitride

This study develops a single-atom Pt-loaded graphitic carbon nitride (SA-Pt/CN) and evaluates its piezo-flexocatalytic properties by conducting a hydrogen evolution reaction (HER) and Rhodamine B (RB) dye degradation test under ultrasonic vibration in the dark. SA-Pt/CN has a hydrogen gas yield of 1283.8 µmol g-1 h-1, which is 23.3 times higher than that of pristine g-C3N4. Moreover, SA-Pt/CN enhances the dye degradation reaction rate by ≈2.3 times compared with the pristine sample. SA-Pt/CN exhibits lattice distortion and strain gradient enlargement caused by the single atom Pt at the N sites of g-C3N4, which disrupts the symmetric structure and contributes to the enhancement of piezoelectric and flexoelectric polarization. As far as it is known, this is the first study to investigate the piezo-flexocatalytic reaction of SA-Pt/CN without light irradiation and provides new insights into single-atom piezocatalysts.

Enhanced Piezocatalytic Activity in Bi1/2Na1/2TiO3 for Water Splitting by Oxygen Vacancy Engineering

Piezoelectric materials have demonstrated applicability in clean energy production and environmental wastewater remediation through their ability to initiate a number of catalytic reactions. In this study, we used a conventional sol-gel method to synthesize lead-free rhombohedral R3c bismuth sodium titanate (BNT) particles of various sizes. When used as a piezocatalyst to generate H₂ through water splitting, the BNT samples provided high production rates (up to 506.70 μmol g^-1 h^-1). These piezocatalysts also degraded the organic pollutant methylene blue (MB, 20 mg L^-1) with high efficiency (up to k = 0.039 min^-1), suggesting their potential to treat polluted water. Finally, we found that the piezopotential caused band tilting in the semiconductor and aided charge transfer such that recombination was suppressed and the rate of H₂ production increased. The mechanism of piezoelectric catalysis involved oxygen vacancies, the size of the catalyst, and the internal electric field playing important roles to enhance electron-hole separation, which further enhanced the catalysis reactions.

Bismuth Vacancy-Mediated Quantum Dot Precipitation to Trigger Efficient Piezocatalytic Activity of Bi2WO6 Nanosheets

Point defects in piezoelectric semiconductors play a significant role in regulating the piezocatalytic performance. However, the role of metal vacancies in piezocatalysis has been less explored than that of oxygen vacancies. Herein, Bi₂WO₆ (BWO) nanosheets with tunable Bi defects were synthesized using an ion exchange method. High-resolution transmission electron microscopy directly revealed the existence of Bi vacancies in the lattice of BWO nanosheets and the precipitation of Bi quasiparticles. The BWO nanosheets with the highest concentration of Bi vacancies exhibited an excellent decomposition efficiency (7.83 × 10^-2 min^-1) over rhodamine B under ultrasound. The phenomenon is mainly attributed to the increased charge carrier concentration as a consequence of defect energy levels. In addition, the significant enhancement of light absorption capacity caused by the surface plasmon resonance effect of quasiparticles indicates that Bi ions escape from the lattice and combine with free electrons around BWO to form Bi quantum dots, which function as electron traps to facilitate the separation of charge carriers during the piezocatalytic process. This work systematically reveals the essential affiliation of metal vacancies and surface metal clusters in piezocatalysts and verifies the significance of vacancy engineering in piezocatalytic application.

Strain-Induced Ferroelectric Heterostructure Catalysts of Hydrogen Production through Piezophototronic and Piezoelectrocatalytic System

In this work, we discover a piezoelectrocatalytic system composed of a ferroelectric heterostructure of BaTiO₃ (BTO)@MoSe₂ nanosheets, which exhibit piezoelectric potential (piezopotential) coupling with electrocatalyzed effects by a strain-induced piezopotential to provide an internal bias to the catalysts' surface; subsequently, the catalytic properties are substantially altered to enable the formation of activity states. The H₂ production rate of BTO@MoSe₂ for the piezoelectrocatalytic H₂ generation is 4533 μmol h^-1 g^-1, which is 206% that of TiO₂@MoSe₂ for piezophototronic (referred to as piezophotocatalytic process) H₂ generation (∼2195.6 μmol h^-1 g^-1). BTO@MoSe₂ presents a long-term H₂ production rate of 21.2 mmol g^-1 within 8 h, which is the highest recorded value under piezocatalytic conditions. The theoretical and experimental results indicate that the ferroelectric BTO acts as a strain-induced electric field generator while the few-layered MoSe₂ is facilitating piezocatalytic redox reactions on its active sites. This is a promising method for environmental remediation and clean energy development.

Performance of hydrogen evolution reaction of R3C ferroelectric ZnSnO3 nanowires

The synthesis of LiNbO₃-type R3C ZnSnO₃ is still a challenging task under an extremely high-pressure condition. In this work, we have not only successfully synthesized R3C ZnSnO₃ nanowires (NWs) through a hydrothermal process, but ZnSnO₃ NWs with a high concentration of oxygen vacancies (referred to as [Formula: see text] NWs), exhibiting a highly efficient hydrogen evolution reaction compared to unannealed ZnSnO₃ and ZnO NWs. The x-ray diffraction pattern and Raman spectra both confirm that the as-synthesized ZnSnO₃ NWs mainly belong to the R3C space group with a second phase of ZnSn(OH)₆. The conversion efficiency of the solar-to-hydrogen [Formula: see text] NWs and the unannealed ZnSnO₃ NWs is 4.8% and 1.5%, respectively. The enhancement factor of the [Formula: see text] NWs is up to 320%. The photocurrent of the ZnSnO₃ NWs and the [Formula: see text] NW photoelectrodes is even 5.39 and 16.23 times higher than that of the ZnO NWs, demonstrating that the high concentration of oxygen vacancies is regarded as a useful approach to enhance the photoelectrochemical response. To the best of our knowledge, this is the first report to reveal the performance of hydrogen evolution reaction by LiNbO₃-type R3C ZnSnO₃ NWs, which could offer a promising way of energy harvesting when using ferroelectric materials.

Zinc oxide/vanadium pentoxide heterostructures with enhanced day-night antibacterial activities

Low photocatalytic efficiency of visible light and fast recombination of photo-generated carriers are two challenges facing the applications of photocatalyst sterilant zinc oxide (ZnO). Meanwhile, both light and dark photocatalytic activities are important. It is of great theoretical and practical significance to construct a day-night photocatalytic antibacterial material, which is beneficial to the effective use of energy and to tackle the limitation of using photocatalytic bacteriostat. ZnO nanoflowers decorated vanadium pentoxide (V₂O₅) nanowires heterojunction (ZVH) was firstly fabricated using a facile water-bathing method. The designed ZVH structure efficiently produced abundant reactive oxygen species (ROS) in both light and darkness. It yielded 99.8% and 99.0% of antibacterial rate against S. aureus due to oxidative stress induced by ROS in light and darkness, respectively. The generation of ROS played a major role in the antibacterial activities against S. aureus under both light and dark conditions. The prepared ZVH with improved antibacterial properties provides an alternative for day-night antibacterial agents.

Steering Charge Kinetics of Tin Niobate Photocatalysts: Key Roles of Phase Structure and Electronic Structure

Tin niobate photocatalysts with the phase structures of froodite (SnNb₂O₆) and pyrochlore (Sn₂Nb₂O₇) were obtained by a facile solvothermal method in order to explore the impact of phase structure and electronic structure on the charge kinetics and photocatalytic performance. By employing tin niobate as a model compound, the effects of phase structure over electronic structure, photocatalytic activity toward methyl orange solution and hydrogen evolution were systematically investigated. It is found that the variation of phase structure from SnNb₂O₆ to Sn₂Nb₂O₇ accompanied with modulation of particle size and band edge potentials that has great consequences on photocatalytic performance. In combination with the electrochemical impedance spectroscopy (EIS), transient photocurrent responses, transient absorption spectroscopy (TAS), and the analysis of the charge-carrier dynamics suggested that variation of electronic structure has great impacts on the charge separation and transfer rate of tin niobate photocatalysts and the subsequent photocatalytic performance. Moreover, the results of the X-ray photoelectron spectroscopy (XPS) indicated that the existent of Sn⁴⁺ species in Sn₂Nb₂O₇ could result in a decrease in photocatalytic activity. Photocatalytic test demonstrated that the SnNb₂O₆ (froodite) catalyst possesses a higher photocatalytic activity toward MO degradation and H₂ evolution compared with the sample of Sn₂Nb₂O₇ (pyrochlore). On the basis of spin resonance measurement and trapping experiment, it is expected that photogenerated holes, O₂^-•, and OH^• active species dominate the photodegradation of methyl orange.

Piezo-Catalytic Effect on the Enhancement of the Ultra-High Degradation Activity in the Dark by Single- and Few-Layers MoS2 Nanoflowers

Single- and few-layer MoS2 nanoflowers are first discovered to have a piezo-catalyst effect, exhibiting an ultra-high degradation activity in the dark by introducing external mechanical strains. The degradation ratio of the Rhodamine-B dye solution reaches 93% within 60 s under ultrasonic-wave assistance in the dark.

Highly sensitive SnO2 sensor via reactive laser-induced transfer

Gas sensors based on tin oxide (SnO₂) and palladium doped SnO₂ (Pd:SnO₂) active materials are fabricated by a laser printing method, i.e. reactive laser-induced forward transfer (rLIFT). Thin films from tin based metal-complex precursors are prepared by spin coating and then laser transferred with high resolution onto sensor structures. The devices fabricated by rLIFT exhibit low ppm sensitivity towards ethanol and methane as well as good stability with respect to air, moisture, and time. Promising results are obtained by applying rLIFT to transfer metal-complex precursors onto uncoated commercial gas sensors. We could show that rLIFT onto commercial sensors is possible if the sensor structures are reinforced prior to printing. The rLIFT fabricated sensors show up to 4 times higher sensitivities then the commercial sensors (with inkjet printed SnO₂). In addition, the selectivity towards CH₄ of the Pd:SnO₂ sensors is significantly enhanced compared to the pure SnO₂ sensors. Our results indicate that the reactive laser transfer technique applied here represents an important technical step for the realization of improved gas detection systems with wide-ranging applications in environmental and health monitoring control.

Surface defect engineering: gigantic enhancement in the optical and gas detection ability of metal oxide sensor

By using surface defect engineering, the gigantic enhancement in UV and gas detection abilities of nanosensors can be achieved.

ZnO quantum dots-decorated ZnO nanowires for the enhancement of antibacterial and photocatalytic performances

We demonstrate highly antibacterial activities for killing off Staphylococcus aureus and Escherichia coli using ZnO nanowires decorated with ZnO quantum dots (so-called ZnO QDs/NWs) under visible-light irradiation and dark conditions. The average size of the ZnO QDs is in the range of 3-5 nm; these were uniformly dispersed on the ZnO nanowires' surface to form the ZnO QDs/NWs. A significant blue-shift effect was observed using photoluminescence (PL) spectra. The size of the ZnO QDs is strongly dependent on the material's synthesis time. The ZnO QDs/NWs exhibited an excellent photocatalytic activity under visible-light irradiation. The ZnO QDs' active sites (i.e. the O-H bond and Zn(2+)) accelerate the photogenerated-carrier migration from the QDs to the NWs. As a consequence, the electrons reacted with the dissolved oxygen to form oxygen ions and produced hydroperoxyl radicals to enhance photocatalytic activity. The antibacterial activities (as indicated by R-factor-inhibiting activity) of the ZnO QDs/NWs for killing off Staphylococcus aureus and Escherichia coli is around 4.9 and 5.5 under visible-light irradiation and dark conditions, respectively. The hydroxyl radicals served as an efficient oxidized agent for decomposing the organic dye and microorganism species. The antibacterial activities of the ZnO QDs/NWs in the dark may be attributed to the Zn(2+) ions that were released from the ZnO QDs and infused into the microbial solution against the growth of bacteria thus disrupting the microorganism. The highly antibacterial and photocatalytic activity of the ZnO QDs/NWs can be well implanted on a screen window, thus offering a promising solution to inhibit the spread of germs under visible-light and dark conditions.

The surface plasmon resonance effect on the enhancement of photodegradation activity by Au/ZnSn(OH)6 nanocubes

This is the first report on the photocatalytic activity with a combination of the surface plasmon resonance effect through Au/ZnSn(OH)₆ nanocubes. The nanocubes have been used for preparing hybrid coating screens, which exhibited excellent mechanical desirable durability and extended their feasible application in our daily lives.

Doped ZnO 1D nanostructures: synthesis, properties, and photodetector application

In the past decades, the doping of ZnO one-dimensional nanostructures has attracted a great deal of attention due to the variety of possible morphologies, large surface-to-volume ratios, simple and low cost processing, and excellent physical properties for fabricating high-performance electronic, magnetic, and optoelectronic devices. This article mainly concentrates on recent advances regarding the doping of ZnO one-dimensional nanostructures, including a brief overview of the vapor phase transport method and hydrothermal method, as well as the fabrication process for photodetectors. The dopant elements include B, Al, Ga, In, N, P, As, Sb, Ag, Cu, Ti, Na, K, Li, La, C, F, Cl, H, Mg, Mn, S, and Sn. The various dopants which act as acceptors or donors to realize either p-type or n-type are discussed. Doping to alter optical properties is also considered. Lastly, the perspectives and future research outlook of doped ZnO nanostructures are summarized.

Ultrahigh responsivity and external quantum efficiency of an ultraviolet-light photodetector based on a single VO₂ microwire

We demonstrated a single microwire photodetector first made using a VO2 microwire that exhibted high responsivity (Rλ) and external quantum efficiency (EQE) under varying light intensities. The VO2 nanowires/microwires were grown and attached on the surface of the SiO2/Si(100) substrate. The SiO2 layer can produce extremely low densities of long VO2 microwires. An individual VO2 microwire was bonded onto the ends using silver paste to fabricate a photodetector. The high-resolution transmission electron microscopy image indicates that the nanowires grew along the [100] axis as a single crystal. The critical parameters, such as Rλ, EQE, and detectivity, are extremely high, 7069 A W(-1), 2.4 × 10(10)%, and 1.5 × 10(14) Jones, respectively, under a bias of 4 V and an illumination intensity of 1 μW cm(-2). The asymmetry in the I-V curves results from the unequal barrier heights at the two contacts. The photodetector has a linear I-V curve with a low dark current while a nonlinear curves was observed under varing light intensities. The highly efficient hole-trapping effect contributed to the high responsivity and external quantum efficiency in the metal-oxide nanomaterial photodetector. The responsivity of VO2 photodetector is 6 and 4 orders higher than that of graphene (or MoS2) and GaS, respectively. The findings demonstrate that VO2 nanowire/microwire is highly suitable for realizing a high-performance photodetector on a SiO2/Si substrate.