Chemical protection of ZnO nanorods at ultralow pH To form a hierarchical BiFeO3/ZnO core-shell structure

ZnO nanostructures: A promising frontier in immunosensor development

This review addresses the design of immunosensors, which employ ZnO nanostructures. Various methods of modifying ZnO nanostructures with antibodies or antigens are discussed, including covalent and non-covalent approaches and cross-linking techniques. Immunosensors based on different properties of ZnO nanomaterials are described and compared. This article provides a comprehensive review of electrochemical immunosensors based on ZnO nanostructures and various detection techniques, including cyclic voltammetry (CV), differential pulse voltammetry (DPV), photoelectrochemical (PEC) detection, electrochemical impedance spectroscopy (EIS), and other electrochemical methods. In addition, this review article examines the application of optical detection techniques, including photoluminescence (PL) and electrochemiluminescence (ECL), in the development of immunosensors based on ZnO nanostructures.

g-C3N4-wrapped nickel doped zinc oxide/carbon core-double shell microspheres for high-performance photocatalytic hydrogen production

The development of efficient heterojunctions with enhanced photocatalytic properties is considered a promising approach for photocatalytic hydrogen production. In this study, graphitic carbon nitride (g-C₃N₄)-wrapped nickel-doped zinc oxide/carbon (Ni-ZnO@C/g-C₃N₄) core-double shell heterojunctions with unique core-double shell structures were employed as efficient photocatalysts through an innovative approach. Ni doping can enhance the intensity and range of visible light absorption in ZnO, and the carbon core coupled with the hollow double-shell structure can accelerate the charge transfer rate and improve the photon utilization efficiency. Meanwhile, the construction of the Z-scheme heterojunction extended the electron-hole pair transport path. In addition, the Z-scheme charge-transfer mechanism of Ni-ZnO@C/g-C₃N₄ under simulated sunlight was verified by photoluminescence (PL) and electron spin resonance (ESR) experiments. As a result, the obtained photocatalyst acquired a high hydrogen evolution rate of 336.08 μmol g^-1h^-1, which is 36.49 times higher than that of pristine ZnO. Overall, this work may provide a pathway for the construction of highly efficient photocatalysts with unique core-double shell structures.

A versatile nanocomposite based on nanoceria for antibacterial enhancement and protection from aPDT-aggravated inflammation via modulation of macrophage polarization

Antibacterial photodynamic therapy (aPDT) is of vital importance for the treatment of periodontal diseases due to its great potential on effective elimination of pathogenic bacteria via overwhelming reactive oxygen species (ROS) generation. However, the excessive ROS after the therapeutic process may impose an oxidative stress within periodontal pockets, consequently leading to an irreversible destroy in surrounding tissue and severely limit its biomedical applications. In this study, considering the contradiction between ROS in bacteriostasis and inflammation, the role of ROS in different temporal and spatial states has been fully studied. Accordingly, we have designed composite nanomaterials that can play ROS based aPDT and anti-inflammatory effect by eliminating ROS, taking account of different ratio of photosensitizer/ROS scavenger to realize a time-sequential manner. Herein, a simple multifunctional nanocomposite was fabricated by coating red light-excited photosensitizer chlorin e6 (Ce6) onto nanoceria, achieving simultaneous sterilization and inflammation elimination via a dual directional regulation effect. This nano-based platform could utilize the aPDT for antibacterial purpose in the first stage with red-light irradiation, and subsequently scavenge the residual ROS via nanoceria to modulate host immunity by down-regulating the M1 polarization (pro-inflammatory) of macrophages and up-regulating the M2 polarization (anti-inflammatory and regenerative) of macrophages. Moreover, the local ROS level induced by activated inflammation pathway can be adjusted in a very long time because of the charge conversion effect of CeO₂. The regenerative potential of inflammatory surrounding tissues was improved in the animal model. Our strategy will open a new inspiration to fight against the defects of aPDT in the treatment of periodontal disease, even in the anti-infection therapy for the future clinical application.

Structural refinement and electrochemical properties of one dimensional (ZnO NRs)1-x(CNs)x functional hybrids for serotonin sensing studies

Herein, the efficient serotonin (5-HT) sensing studies have been conducted using the (ZnO NRs)1-x(CNs)x nanocomposites (NCs) having appropriate structural and electrochemical properties. Initially, the different compositions of ZnO nanorods (NRs), with varying content of carbon nanostructures (CNs=MWCNTs and RGO), are prepared using simple in-situ wet chemical method and thereafter these NCs have been characterized for physico-chemical properties in correlation to the 5-HT sensing activity. XRD Rietveld refinement studies reveal the hexagonal Wurtzite ZnO NRs oriented in (101) direction with space group 'P63mc' and both orientation as well as phase of ZnO NRs are also retained in the NCs due to the small content of CNs. The interconnectivity between the ZnO NRs with CNs through different functional moieties is also studied using FTIR analysis; while phases of the constituents are confirmed through Raman analysis. FESEM images of the bare/NCs show hexagonal shaped rods with higher aspect ratio (4.87) to that of others. BET analysis and EIS measurements reveal the higher surface area (97.895 m2/g), lower charge transfer resistance (16.2 kΩ) for the ZCNT 0.1 NCs to that of other NCs or bare material. Thereafter, the prepared NCs are deposited on the screen printed carbon electrode (SPCE) using chitosan as cross-linked agent for 5-HT sensing studies; conducted through cyclic voltammetry (CV) and square wave voltammetry (SWV) measurements. Among the various composites, ZCNT0.1 NCs based electrodes exhibit higher sensing activity towards 5-HT in accordance to its higher surface area, lower particle size and lower charge transfer resistance. SWV measurements provide a wide linear response range (7.5-300 μM); lower limit of detection (0.66 μM), excellent limit of quantification (2.19 μM) and good reproducibility to ZCNT 0.1 NCs as compared to others for 5-HT sensing studies.

Facile Fabrication of C-TiO2 Nanocomposites with Enhanced Photocatalytic Activity for Degradation of Tetracycline

Visible-lightdriven C-TiO₂ nanocomposites were prepared via a simple calcination and acid etching process. The C-TiO₂ nanocomposites were characterized by X-ray photoelectron spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, and high-resolution TEM. The results showed that TiO₂ nanoparticles were combined with a porous carbon layer through surface C-O groups, which facilitates the strong interface interaction. The interface combination of nano-TiO₂ and carbon material increases the specific surface area of nano-TiO₂, widens the range of light response, and improves the efficiency of light-induced electron migration. The visible-light photocatalytic activity of the prepared photocatalyst was evaluated by the decomposition of tetracycline aqueous solution. Compared with that of pure TiO₂, the photocatalytic activity of C-TiO₂ nanocomposites was significantly improved. Furthermore, a possible photocatalytic mechanism was also tentatively proposed. This work can promote the development of active photocatalysts under solar light for the photodegradation of environmental pollutants.

A novel sandwich-type photoelectrochemical immunosensor based on Ru(bpy)32+ and Ce-CdS co-sensitized hierarchical ZnO matrix and dual-inhibited polystyrene@CuS-Ab2 composites

A novel and sensitive sandwich-type photoelectrochemical (PEC) immunosensor was developed for the quantitative detection of β-amyloid protein (Aβ). A ITO electrode was sequentially coated with hierarchical porous zinc oxide (ZnO) microspheres with a large specific area, sensitized with tris(bipyridine)ruthenium(II) ion (Ru(bpy)₃²⁺) to achieve high visible light absorption, and modified with cerium-doped cadmium sulfide (Ce-CdS) nanoparticles to enhance the PEC response. Under the stimulation of visible light and ascorbic acid as an efficient electron donor, the photoelectric signal of ZnO/Ru(bpy)₃²⁺/Ce-CdS was 70 times that of pure ZnO. The amino-functionalized polystyrene (PS) microspheres coated with copper sulfide (CuS) was linked with a secondary antibody (Ab₂) for the first time for the Aβ detection by the immunosensor. The good insulation and steric resistance of the as-prepared polystyrene@CuS-Ab₂ (PS@CuS-Ab₂) composite significantly weakened the photocurrent response of the immunosensor in the specific immune recognition. Under the optimal conditions, the quantitative detection of Aβ was achieved within the range of 0.001-100 ng/mL with the detection limit of 0.37 pg/mL. In addition, the PEC immunosensor is easy to make, stable and selective, which has provided a good experimental platform for the detection of disease biomarkers.

Recent advancements in compact layer development for perovskite solar cells

Herein, we will present recent progress in the compact layer (CL) or hole blocking layer (HBL) which is known as an important layer and not as an essential layer for perovskite solar cells (PSCs). The CL involves an effective role to enhance efficiency in PSCs. Thus, any change, modification, and replacement in this layer will have a profound effect on the performance and improvement of some characteristics such as photo-stability, durability and hysteresis effect. These changes can improve the applications of PSCs in the flexible cell, industrial mass production, high-scale manufacturing. In this review, we will present recent studies on CLs.

Crystallization and solid solution attainment of samarium doped ZnO nanorods via a combined ultrasonic-microwave irradiation approach

An advanced sol-gel method is developed via combined ultrasound-microwave irradiation and utilized for the crystallization of pristine and samarium doped zinc oxide nanorods. Organic structure directing agents directed one dimensional growth and air-annealing was applied as post-thermal treatment. Microstructural, optical, and solid state survey was pursued by PXRD, FESEM, TEM, EDS, FTIR, DRS, PL, micro-Raman, H₂-TPR, and ESR techniques. Phase analysis by diffraction patterns confirmed the efficacy of irradiation strategy as it improves the crystallinity degree, expedites the hexagonal close pack morphology, and conducts lattice imperfection. Accordingly, aspect ratio and electronic evolution parallel to dopant content is favored. Electron microscopy demonstrated the flake-like rearrangement of nanorods as well as a structure-related growth where a direct proportion exists between atomic packing factor in lattice and aspect ratio. Textural investigation by EDS and FTIR rejected the presence of any impurity verifying an integrated composition. Reflectance and luminescence spectra exhibited characteristic optical behavior with shifts corresponding to dopant concentration. Also, band gap energies increased with samarium addition depicting an opposite trend with respect to unit cell variation. Finally, Raman, TPR, and ESR spectra provided detailed dopant-dependent trends on the internal solid state and defect chemistry of the nanorods. In this regard, maximum shifts in E₂^high and E₁^LO phonon modes duly correlated with the vibrations of zinc and oxygen atoms, surface oxygen and bulk ZnO reduction bands, emergence and alteration of samarium centers, along with the dominance of zinc and oxygen vacancies were all resulted due to the utmost lattice imperfection in SZO1.

Molecular gated-AlGaN/GaN high electron mobility transistor for pH detection

A molecular gated-AlGaN/GaN high electron mobility transistor has been developed for pH detection.

Bioinspired Synthesis of Photocatalytic Nanocomposite Membranes Based on Synergy of Au-TiO2 and Polydopamine for Degradation of Tetracycline under Visible Light

A bioinspired photocatalytic nanocomposite membrane was successfully prepared via polydopamine (pDA)-coated poly(vinylidene fluoride) (PVDF) membrane, as a secondary platform for vacuum-filtrated Au-TiO₂ nanocomposites, with enhanced photocatalytic activity. The degradation efficiency of Au-TiO₂/pDA/PVDF membranes reached 92% when exposed to visible light for 120 min, and the degradation efficiency of Au-TiO₂/pDA/PVDF membranes increased by 26% compared to that of Au-TiO₂ powder and increased by 51% compared to that of TiO₂/pDA/PVDF nanocomposite membranes. The degradation efficiency remained about 90% after five cycle experiments, and the Au-TiO₂/pDA/PVDF nanocomposite membranes showed good stability, regeneration performance, and easy recycling. The pDA coating not only served as a bioadhesion interface to improve the bonding force between the catalyst and the membrane substrate but also acted as a photosensitizer to broaden the wavelength response range of TiO₂, and the structure of Au-TiO₂/pDA/PVDF also improves the transfer rate of photogenerated electrons; the surface plasmon resonance effect of Au also played a positive role in improving the activity of the catalyst. Therefore, we believe that this study opens up a new strategy in preparing the bioinspired photocatalytic nanocomposite membrane for potential wastewater purification, catalysis, and as a membrane separation field.

Facile fabrication of highly efficient modified ZnO photocatalyst with enhanced photocatalytic, antibacterial and anticancer activity

Photocatalytic degradation of organic pollutants using hexagonal Er and Nd doped ZnO photocatalyst.

Rectangular ZnO porous nano-plate assembly with excellent acetone sensing performance and catalytic activity

An assembled porous rectangular single crystalline ZnO plate with superior acetone sensing performance and catalytic activity is presented.