Layered double hydroxide-carbon dot composite: high-performance adsorbent for removal of anionic organic dye

Carbon and graphene quantum dots based architectonics for efficient aqueous decontamination by adsorption chromatography technique - Current state and prospects

Aquatic ecosystems and potable water are being exploited and depleted due to urbanization and the encouragement of extensive industrialization, which induces the scarcity of pure water. However, current decontamination methods are limited and inefficient. Various innovative remediation strategies with novel nanomaterials have recently been demonstrated for wastewater treatment. Carbon dots (C-dots) and graphene quantum dots (GQ-dots) are the most recent frontiers in carbon nanomaterial-based adsorption studies. C-dots are extremely small (1-10 nm) quasi-spherical carbon nanoparticles (mostly sp3 hybridized carbon), whereas GQ-dots are fragments of graphene (1-20 nm) composed of primarily sp2 hybridized carbon. This article highlights the function of C-dots and GQ-dots with their specifications and characteristics for the efficient removal of organic and inorganic contaminants in water via adsorption chromatography. The alteration of adsorption attributes with the hybrid blending of these dots has been critically analyzed. Moreover, various top-down and bottom-up approaches for synthesizing C-dots and GQ-dots, which ultimately affect their morphology and structure, are described in detail. Finally, we review the research deficit in the adsorption of diverse pollutants, fabrication challenges, low molecular weight, self-agglomeration, and the future of the dots by providing research prospects and selectivity and sensitivity perspectives, the importance of post-adsorption optimization strategies and the path toward scalability at the tail of the article.

Fabrication of Monodisperse Magnetic Polystyrene Mesoporous Composite Microspheres for High-Efficiency Selective Adsorption and Rapid Separation of Cationic Dyes in Textile Industry Wastewater

Sustainable development has become an inevitable trend in the world's green chemical industry for a generation or more. In this study, a monodisperse magnetic polystyrene mesoporous composite microsphere (MPPS) composed of Fe3O4 nanoparticles loaded on polystyrene mesoporous microspheres is introduced. These microspheres serve as effective adsorbents for the swift removal of cationic dyes. The fabrication of the wastewater adsorbent, with its simple operation and economic practicality, involved a combination of dispersion polymerization, a sulfonation reaction, two-step swelling polymerization, and in situ alkaline oxidation technology. Notably, the adsorption capacity within 3 min reaches 184.0 mg/g, with an impressive adsorption efficiency of 92%. This is primarily attributed to the high specific surface area (Smax) of the MPPS providing more reaction sites for π-π interaction. Simultaneously, the attractive force between negatively charged sulfonic acid groups and cationic dyes is enhanced through surface modification of the MPPS. Furthermore, the MPPS, boasting a maximum saturation magnetization of 38.19 emu/g, ensures rapid separation from the solution for recycling within 3 s. Even after 5 cycles, the adsorption efficiency remains over 90%. The rapid separation of dyes is facilitated by the magnetic attraction of Fe3O4 nanoparticles from the MPPS under the application of a magnetic field. These composite mesoporous materials exhibit outstanding performance in both efficient selective adsorption and recyclability, presenting a novel green adsorbent with promising prospects for sustainable development. This innovation is poised to excel in fields such as sewage treatment, separation, and purification.

Green synthesis of carbon quantum dots from teak leaves biomass for in situ precipitation and regenerative-removal of methylene blue-dye

The objective of this study was to completely eliminate environmentally harmful cationic organic dye from aqueous solutions using the one-step ultrasonication method, renowned for its energy efficiency, user-friendliness, and minimal requirement for chemical resources, making it particularly suitable for large-scale applications. To achieve effective environmental remediation, we employed carbon dots derived from teak leaf biomass (TBCDs) layered with graphene oxide. We conducted a thorough characterization of the TBCDs using UV-vis spectroscopy (with absorption peaks at λmax = 208 and 276 nm), FTIR spectroscopy (confirming the presence of various functional groups including -OH, -CH, C = O, COO-, C-O-C, and = C-H), Raman spectroscopy (with bands at 1369 cm-1 (D-Band) and 1550 cm-1 (G-Band), and an intensity ratio (ID/IG) = 0.88, indicating structural defects correlated with the sp3 hybridization sites on the TBCDs), XRD analysis (indicating an amorphous nature of particles), HRTEM imaging (showing homogeneous dispersal of TBCDs with typical sizes ranging from 2 to 10 nm), FESEM analysis (showing a flat surface and minuscule particles), and Zeta potential analysis (revealing a surface charge peak at -51.0 mV). Our adsorption experiments yielded significant results, with a substantial 50.1 % removal rate and an impressive adsorption capacity of 735.2 mg g-1. Theoretical adsorption parameters were rigorously analyzed to understand the adsorption behavior, surface interactions, and mechanisms. Among these models, the Langmuir isotherm in conjunction with pseudo-second-order kinetics provided an exceptional fit (with R2 values closer to 1) for our system. The Gibbs free energy (ΔG) was found to be negative at all temperatures, indicating the spontaneity of the reaction. Regarding mechanism, electrostatic attraction ((+ve) MB dye + (- ve) TBCDs), π-π stacking adsorption facilitated by the graphitic structure, formation of multiple hydrogen bonds due to polar functional groups, and a pore-filling mechanism wherein the cationic MB dye fills the pores of TBCDs with graphene oxide layers, forming an adduct were identified. Furthermore, we demonstrated the regenerative capacity of our system by effectively extracting and recovering the MB dye (with a regeneration rate of 77.1%), utilizing ethyl alcohol as the solvent. These findings not only provide valuable insights into the adsorption capabilities of TBCDs but also highlight the potential of our approach in the recovery of expensive cationic organic dye compounds from polluted environments.

Reducing nitrogen loss from farmland by layered double hydroxide-supported carbon dots-enhanced ammonium immobilization

It remains a significant challenge to develop a kind of cost-effective and eco-friendly adsorbent with strong immobilization capabilities for ammonium in farmland. In this work, we employed Ca/Al layered double hydroxide-supported carbon dots (CDs@Ca/Al-LDHs) as a novel and efficient adsorbent for ammonium immobilization both in aqueous and soil environments. Such a composite could exhibit a high adsorption capacity towards ammonium in solution, which was four times higher than zeolite and three times higher than biochar under the same conditions. The mechanism investigations revealed that electrostatic interactions between the negatively charged CDs and the positively charged ammonium played a key role in the adsorption. In 30-day leaching experiments, the fabricated composite cumulatively reduced ammonium and nitrate by 6.3% and 9.7%, respectively at a dosage of 0.1% (w/w). Incubation experiments further confirmed that the developed composite could effectively inhibit ammonia volatilization and nitrification by immobilizing the ammonium within soil matrices. Our results demonstrated that CDs@Ca/Al-LDHs represented a promising candidate for cost-effective and eco-friendly immobilization of excess ammonium from over-fertilized farmland.

Hierarchical Mg/Al hydrotalcite oxide hollow microspheres with excellent adsorption capability towards Congo red

A novel citrate anion-intercalated Mg/Al layered double hydroxide (CA-LDH) is synthesized via a one-step hydrothermal process. The synthesized CA-LDH is a hollow flower-like microsphere composed of thin nanoflakes (10 nm in thickness). After calcination, the formed Mg/Al layered double oxide (CA-LDO) hollow microspheres possess a high specific surface area of 247.8 m2 g-1 and a high pore volume of 0.97 cm3 g-1, which endow them with excellent adsorption ability towards Congo red (CR). The maximum adsorption capacity of CR onto CA-LDO can reach up to 1883 mg g-1. The significantly improved adsorption capacity of CA-LDO can be attributed to its unique structures of hierarchical hollow microspheres, in which the hierarchical porous shell layer provides enough adsorption sites to anchor the dye molecules, and the hollow core can preserve the absorbed dye. This study provides a promising novel adsorbent which can be used for efficient water remediation.

Advancements in textile dye removal: a critical review of layered double hydroxides and clay minerals as efficient adsorbents

The textile industry is responsible for producing large volumes of wastewater that contain a wide variety of dye compounds. This poses a significant environmental hazard and risks harming both ecosystems and living organisms. This review study explores the advancements in adsorption research for dye removal, with a particular emphasis on the development of various adsorbents. The article provides detailed insights into the toxicity and classification of dyes, different treatment techniques, and the characteristics of numerous adsorbents, with special attention to layered double hydroxides (LDH) and clay minerals. A comprehensive list of adsorbents, encompassing natural materials, agricultural by-products, industrial waste, and activated carbon, is discussed for effective removal of different dyes. Furthermore, the review extensively examines the influence of various adsorption variables, such as pH, initial dye concentration, adsorbent dosage, temperature, contact time, ionic strength, and pore volume of the adsorbent. Additionally, the application of response surface methodology for optimizing adsorption variables is elucidated. Commonly, electrostatic attraction, π-π interactions, n-π interactions, van der Waals forces, H-bonding, and pore diffusion play a major role in adsorption mechanism. The review also found that LDH can eliminate a wide range of dyes from wastewater, achieving excellent uptake capacities often exceeding 500 mg/g, with a removal efficiency of 99%. The Langmuir isotherm and pseudo-second-order kinetic equations gave the best fit to most of the adsorption data. Overall, this review serves as a valuable resource for researchers and practitioners seeking sustainable solutions to address the environmental challenges posed by textile dye contamination.

Heterostructure particles enable omnidispersible in water and oil towards organic dye recycle

Dispersion of colloidal particles in water or oil is extensively desired for industrial and environmental applications. However, it often strongly depends on indispensable assistance of chemical surfactants or introduction of nanoprotrusions onto the particle surface. Here we demonstrate the omnidispersity of hydrophilic-hydrophobic heterostructure particles (HL-HBPs), synthesized by a surface heterogeneous nanostructuring strategy. Photo-induced force microscopy (PiFM) and adhesion force images both indicate the heterogeneous distribution of hydrophilic domains and hydrophobic domains on the particle surface. These alternating domains allow HL-HBPs to be dispersed in various solvents with different polarity and boiling point. The HL-HBPs can efficiently adsorb organic dyes from water and release them into organic solvents within several seconds. The surface heterogeneous nanostructuring strategy provides an unconventional approach to achieve omnidispersion of colloidal particles beyond surface modification, and the omnidispersible HL-HBPs demonstrate superior capability for dye recycle merely by solvent exchange. These omnidispersible HL-HBPs show great potentials in industrial process and environmental protection.

Defective multi-element hydroxides nanosheets for rapid removal of anionic organic dyes from water and oxygen evolution reaction

Water pollution by dyes is one of the biggest environmental problems. Adsorption technology has been widely used in wastewater treatment. In this work, high-entropy concept is used to design surface defective hydroxides realizing the rapid removal of dyes from water. Multi-element hydroxides (MEHs) containing three (CoMnNi, MEH-Ternary), four (CoMnNiZn, MEH-Quaternary), and five (CoMnNiZnFe, MEH-Quinary) metal elements are successfully synthesized through a polyol process. These as-synthesized MEHs are composed of nanosheets with a brucite-like structure. Along with the increase in compositional complexity (i.e., configurational entropy), the thickness of the nanosheets in these MEHs decreases, while the degree of surface defects increase. These surface defects are probably the active sites for anionic dyes adsorption, suggesting rapid adsorption kinetics with shortened diffusion path length. For MEH-Quinary in 0.2 mM Congo red (CR) and MEH-Ternary in 0.4 mM methyl orange (MO) aqueous solutions, respectively, high removal efficiency > 99.0% is achieved in the first 30 s. Their pseudo-second-order rate constants are two orders of magnitude higher than that of activated carbon and hydrotalcite. MEH-Quinary has maximum CR and MO adsorption quantity of 546.4 and 404.9 mg g^-1, respectively, by Langmuir model. The MEH-Quinary is also a potential electrocatalyst for oxygen evolution reaction.

Nanocomposites of nitrogen-doped carbon dots/hydrotalcite with enhanced solid-state fluorescence for the recognition of latent fingerprints

In this work, a green emissive nanocomposite was synthesized by embedding nitrogen-doped carbon dots into hydrotalcite (N-CD/hydrotalcite) via a hydrothermal process for the recognition of latent fingerprints (LFPs). Good dispersion of the nano-sized N-CD on the surface of hydrotalcite overcomes the fluorescence quenching of N-CD in the solid state and can enhance solid-state fluorescence. N-CD/hydrotalcite emits stable strong green fluorescence even at different excitation wavelengths and exhibits good selectivity and sensitivity for the visualization of LFPs on various substrates such as glass slides, tiles, leather, aluminum foil, printing paper, colored surfaces of plastic packing, copper foil, planks, leaves, currencies, and bar codes. The high-level details of the ridge patterns of both fresh and aged LFPs can be clearly identified with good clarity and high contrast without background interferences under the excitation of a 450 nm light source. There is no significant difference in the LFP image visualized by N-CD/hydrotalcite and commercial fluorescent powders, indicating that the effectiveness of N-CD/hydrotalcite for the visualization of LFPs is equivalent to that of commercial fluorescent powders. These observations illustrate that N-CD/hydrotalcite has great potential in the recognition of LFPs.

Real-Time Imaging of Stress in Single Spherulites and Its Relaxation at the Single-Particle Level in Semicrystalline Polymers

Crystallization-induced microscopic stress and its relaxation play a vital role in understanding crystallization behavior and mechanism. However, the real-time measurements for stress and its relaxation seem to be an unachievable task due to difficulties in simultaneous labeling, spatiotemporal discrimination, and continuous quantification. We designed a micron-sized fluorescent probe, whose fluorescence can respond to stress-induced environmental rigidity and whose three-dimensional (3D) flow can respond to stress relaxation. Using the as-prepared fluorescent probe, we established a versatile strategy to realize the real-time 3D imaging of stress and its relaxation in the crystallization process. The rigidity-responsive fluorescence clearly indicated the stress, while the 3D flow movement could quantify the stress relaxation. It is revealed that stress in spherulites increased dramatically as a result of the suppression of stress relaxation in polymer melts. The developed method provides a novel avenue to simultaneously detect stress and its relaxation in various semicrystalline polymers at the single-particle level. This success would achieve the microscopic ways to guide the development of advanced crystallization-dependent materials.

Layered Double Hydroxide/Graphene Quantum Dots as a New Sorbent for the Dispersive Solid-Phase Microextraction of Selected Benzophenones, Phenols, and Parabens

In this study, the synthesis of a layered double hydroxide (LDH) composite with graphene quantum dots (GQDs) and its utilization for the development of a dispersive solid-phase extraction procedure are described. To this end, a carbonate-free Mg-Al LDH was synthesized. The development of the composite material made feasible the use of GQDs in a sample preparation procedure, while the incorporation of the GQDs in the LDH structure resulted in an 80% increase in extraction efficiency, compared to the bare LDH. As a proof of concept, the composite material was used for the development of an analytical method for the extraction, and preconcentration, of benzophenones, phenols, and parabens in lake water using high-performance liquid chromatography, coupled to a diode array detector. The analytical method exhibits low limits of quantification (0.10-1.33 μg L^-1), good recoveries (92-100%), and satisfactory enrichment factors (169-186). Due to the abovementioned merits, the easy synthesis and simple extraction, the developed method can be used for the routine analysis of the target compounds.

Covalent and Non-covalent Functionalized Nanomaterials for Environmental Restoration

Nanotechnology has emerged as an extraordinary and rapidly developing discipline of science. It has remolded the fate of the whole world by providing diverse horizons in different fields. Nanomaterials are appealing because of their incredibly small size and large surface area. Apart from the naturally occurring nanomaterials, synthetic nanomaterials are being prepared on large scales with different sizes and properties. Such nanomaterials are being utilized as an innovative and green approach in multiple fields. To expand the applications and enhance the properties of the nanomaterials, their functionalization and engineering are being performed on a massive scale. The functionalization helps to add to the existing useful properties of the nanomaterials, hence broadening the scope of their utilization. A large class of covalent and non-covalent functionalized nanomaterials (FNMs) including carbons, metal oxides, quantum dots, and composites of these materials with other organic or inorganic materials are being synthesized and used for environmental remediation applications including wastewater treatment. This review summarizes recent advances in the synthesis, reporting techniques, and applications of FNMs in adsorptive and photocatalytic removal of pollutants from wastewater. Future prospects are also examined, along with suggestions for attaining massive benefits in the areas of FNMs.

Highly efficient and rapid purification of organic dye wastewater using lignin-derived hierarchical porous carbon

Coating manufacturing, textile processing, and plastic industry have led to dramatical release levels of hazardous organic dye pollutants threatening public health and the environment. To solve this problem, porous carbon materials are being developed following with the United Nations initiative on water purification. However, conventional porous carbon materials face many challenges, such as limited removal rates, low adsorption capacity, and high chemicals consumption, hampering their large-scale utilization in dye wastewater treatment. Herein, we demonstrate a high-performance lignin-derived hierarchical porous carbon (LHPC) material directly prepared from renewable lignin through a low-cost activation procedure. The large specific surface area (1824 m²/g) enables the rapid and effective adsorption of organic dyes. Therefore, the LHPC exhibits an ultrahigh adsorption ability (1980.63 mg/g) and removal rate (99.03% in 10 min) for Azure B, superior to that of other adsorbents. Additionally, the LHPC adsorbent, organic dyes, eluting agent, and water all can be recycled and reused in a designed close-looped system. Its high removal ability and rate, strong retrievability, low-cost and scalable production combined with high dyes adsorption universality, positions our LHPC as a promising commercial adsorbent candidate for the purification of harmful organic dye wastewater, especially for heavily polluted area with an insistent demand for clear water.

Layered double hydroxides functionalized by carbonaceous materials: from preparation to energy and environmental applications

Along with the exponential demand for energy and pollution-free-environment, layered double hydroxides (LDHs) have gained extensive explorations because of their diverse nanostructures and tunable elemental compositions. However, the applications of LDHs are hindered by their poor activity, sluggish mass transfer, and aggregation. LDHs functionalized by carbonaceous materials (CMs) (LDH-CM) are expected to overcome the above disadvantages and even generate more excellent performance. This review first analyzes the research evolvement of LDH-CM composites during the past 25 years. Next, the advantages of LDH-CM composites are highlighted, such as morphology optimization, high electrical conductivity, more stable, good heat, and mass transfer performance. Following the synthetic strategies, including chemical assembly of LDHs and CMs, direct growth of LDH on CMs (two-step nucleation and growth and surface-confined growth) and direct CM formation on LDHs are fully discussed. Then, the recent progress achieved in LDH-CM composites for the application of energy storage and environmental protection is summarized in detail. In particular, the review illustrates the reasons why these constructing strategies can improve the performance of LDH-CM composites. Finally, challenges and future research prospects of LDH-CM composites are highlighted.

Bridging between NiAl-LDH and g-C3N4 by using carbon quantum dots for highly enhanced photoreduction of CO2 into CO

A series of treble NiAl-LDH/g-C₃N₄/carbon quantum dots (LDH/CN/CQDs) photocatalysts is successfully prepared for the photoreduction of CO₂ to CO via a facile hydrothermal pathway. In the 3D flower-like LDH/CN/CQDs, CQDs not only achieve the efficient inhibition of charge recombination but also act as the unhindered "electronic bridges" to synergistically construct a classical type-Ⅱ charge transfer configuration, which synchronously permits the effluence of photogenerated electrons from CN to LDH and holes from LDH to CN, and promotes ultraviolet-visible irradiation respondence. The sample of LDH/CN/CQDs-6 is the optimal one amongst the LDH/CN/CQDs with a larger special surface area (98.43 m²g^-1) and an appropriate content of CQDs (66.9 wt%), exhibiting the highest CO evolution rate (5.2 μmol·g^-1·h^-1) under visible light irradiation without any sacrificial agent or photosensitizer in water. This is 26.8- and 20.9-fold higher than those of the pristine LDH, pure CN, and their binary counterparts, respectively, and also outperforms most reported LDH-based photocatalysts. As unhindered electron conduction bridges, the highly dispersed CQDs in the LDH/CN heterojunction significantly increase utilization efficiency of light energy and separation efficiency of photogenerated electron-hole pairs. This work provides a beneficial attempt to integrate CQDs with LDH/CN for the positive synergetic effect on both photoelectric properties and electron transfer to obtain highly enhanced photocatalytic activity of CO₂ into CO, and expected to be extended towards broader photocatalytic applications.

Inhibitory Effect of Aptamer-Carbon Dot Nanomaterial-siRNA Complex on the Metastasis of Hepatocellular Carcinoma Cells by Interfering with FMRP

Using small interfering RNA (siRNA) for the specific gene-silencing has been a novel therapeutic method for the treatment of incurable diseases such as malignancies. However, it remains a challenge whether siRNA can be safely and effectively delivered into target cells. Therefore, we synthesized fluorescent carbon dots (CDs) as a gene vector at the siRNA delivery system that induced efficient gene knockdown in vitro while binding aptamer AS1411 to resolve the difficulty in cell targeting. We found that CDs with adequate biocompatibility can improve the efficiency of cellular uptake of siRNA. CLSM and FCM results showed that CDs were mainly localized in the cytoplasm and emitted bright green fluorescence. In addition, the CD/siRNA delivery system mediated by the aptamer AS1411 effectively silenced the expression of Fragile X mental retardation protein (FMRP) and successfully inhibited the migration and invasive propensity of hepatocellular carcinoma (HCC) cells. In summary, we have synthesized a valuable siRNA delivery vector enabling not only bioimaging but also effective downregulation of gene expression, which is indicative of an efficient potential for gene delivery and therapy.

One-step solvent-free synthesis of carbon dot-based layered composites exhibiting color-tunable photoluminescence

We here report a practical and green approach to the development of luminescent composites through in situ solvent-free formation of carbon dots on layered inorganic compounds. The composites exhibit higher solid-state photoluminescence than those prepared by mixing of synthesized carbon dots and layered clay minerals. Tuning of the emission color of the composites has also been achieved by the addition of small molecules into phloroglucinol as starting materials for carbonization. The carbon dots synthesized in clay compounds in the solvent-free conditions are well-dispersed to obtain homogeneous composites. Furthermore, we have demonstrated that highly luminescent carbon dots are formed by carbonization in the presence of layered inorganic compounds. The one-step solvent-free approach presented in this work may allow not only facile, economical, and sustainable production of nanostructured carbon dot-based composites but also improvement of their luminescence properties.

A practical and green approach to the development of color-tunable luminescent composites through in situ solvent-free synthesis of carbon dots on layered inorganic compounds is reported.

Coating layered double hydroxides with carbon dots for highly efficient removal of multiple dyes

Layered double hydroxides (LDHs) and layered double oxides (LDOs) are desirable adsorption materials for printing and wastewater treatment owing to their outstanding anion exchange abilities, abundant active sites, and eco-friendly nature. In this study, a versatile LDO hybrid coated with carbon dots (CDs@MgAl-LDO) was constructed by modifying sodium dodecylbenzene sulfonate on the surface of MgAl-LDH as a carbon precursor, followed by ligand carbonization and hydrotalcite dehydration at 450 °C under N₂ flow. CDs@MgAl-LDO displayed a hexagonal lamellar architecture with a plate lateral size of approximately 500 nm. It had a higher BET specific surface area (28.61 m²/g) than MgAl-LDO (11.48 m²/g). X-ray diffraction analysis revealed that CDs@MgAl-LDO maintained the "memory effect" of LDOs and could retrieve the original structure when dispersed in water. Moreover, the modified carbon dots change the intrinsically hydrophilic nature of LDOs and help to improve the affinity for organic contaminants, including both cationic and anionic dyes. The adsorption of dyes on CDs@MgAl-LDO followed a pseudo-second-order kinetic model with correlation coefficients (R²) ranging from 0.9901 to 0.9911 and exhibited Freundlich-type heterogeneous adsorption. It showed superior adsorption performance for three dyes, with the maximum adsorption capacity of 3628.9-5174.1 mg/g, thereby outperforming previously reported LDH-based adsorbents. This work developed a facile approach for preparing new carbon dots-LDH hybrids for the highly efficient removal of multiple dyes.

Adsorption Behavior of Magnetic Carbon-Supported Metal Nickel for the Efficient Dye Removal from Water

Magnetic carbon-supported metal nickel has been successfully synthesized by solvothermal method and heat treatment for highly effective adsorption of various reactive dyes. Structure characterization and composition analysis demonstrated that the metal nickel nanoparticles with the size of 1–2 nm were embedded into the pore of carbon spheres. It is helpful to prevent the agglomeration and falling off of metal nickel nanoparticles on the surface of carbon spheres. The adsorption performance of the carbon-supported metal nickel nanospheres for reactive brilliant yellow R-4GLN was studied by changing the pH value and initial concentration of the solution, adsorption time, adsorption temperature, and the amount of adsorbent. The carbon-supported metal nickel showed fast and efficient adsorption activity. After 5 min of adsorption, the removal efficiency of 10 mL 25 mg·mL⁻¹ reactive brilliant yellow R-4GLN was close to 100%. The carbon-supported metal nickel composite was reused 20 times, and the removal efficiency of dye remained above 98%. It also showed good adsorption performance on various reactive dyes with wide universality, which has a certain adsorption effect on most dyes with a high utilization value in wastewater treatment.

Recent Advances in Functional Carbon Quantum Dots for Antitumour

Carbon quantum dots (CQDs) are an emerging class of quasi-zero-dimensional photoluminescent nanomaterials with particle sizes less than 10 nm. Owing to their favourable water dispersion, strong chemical inertia, stable optical performance, and good biocompatibility, CQDs have become prominent in biomedical fields. CQDs can be fabricated by “top-down” and “bottom-up” methods, both of which involve oxidation, carbonization, pyrolysis and polymerization. The functions of CQDs include biological imaging, biosensing, drug delivery, gene carrying, antimicrobial performance, photothermal ablation and so on, which enable them to be utilized in antitumour applications. The purpose of this review is to summarize the research progress of CQDs in antitumour applications from preparation and characterization to application prospects. Furthermore, the challenges and opportunities of CQDs are discussed along with future perspectives for precise individual therapy of tumours.

Uniformly coating ZnAl layered double oxide nanosheets with ultra-thin carbon by ligand and phase transformation for enhanced adsorption of anionic pollutants

The increasing severity of water pollution has strongly urged to develop green and efficient adsorbents for waste-water treatment. In this work, ZnAl layered double oxide nanosheets uniformly coated with ultra-thin amorphous carbon shells (ZnAl-LDO@C) were fabricated by modifying ZnAl layered double hydroxides (LDHs) with molecular ligands followed by calcination. Compared with their counterparts derived from the pristine ZnAl-LDH, ZnAl-LDO@C nanosheets exhibit higher specific surface area with abundant and highly accessible active sites. The adsorption performance of the ZnAl-LDO@C nanosheets for methyl orange (MO) and hexavalent chromium [Cr(VI)] ions was investigated in detail. It is found that the channel-like hydrophilic carbon shells facilitate the diffusion of water molecules and ions, leading to the fast adsorption rate. In addition, the rich oxygen-containing functional groups in the amorphous carbon shells can efficiently improve the adsorption capacity through multiple interactions. As a result, ZnAl-LDO@C nanosheets exhibit superior adsorption performance for MO and Cr(VI), outperforming most LDH- or LDO-based adsorbents reported previously. Meanwhile, a new oriented overlapping intercalation mechanism for MO adsorption was proposed for the first time to clarify how MO molecules arrange at the interlayer space.

Improved performance of 3D hierarchical NiAl-LDHs micro-flowers via a surface anchored ZIF-8 for rapid multiple-pollutants simultaneous removal and residues monitoring

In this paper, we report a new type of 3D ZIF-8@NiAl-LDHs micro-flowers material consisting of sandwich-like structured 2D nanopetals (highly compact ZIF-8 film anchored on both sides of petals). ZIF-8 was successfully incorporated into NiAl-LDHs (ZIF-8@NiAl-LDHs) via seeding strategy directed growth of ZIFs on the surface of LDHs nanopetals. The coating of ZIF-8 significantly increased the adsorption ability to organic pollutants and inorganic cation. 3D ZIF-8@NiAl-LDHs with excellent enrichment and filtration properties has been exploited for the application in water purification, and exhibit superior high adsorption rate and adsorption efficiency of organic (nonsteroidal anti-inflammatory drugs: ketoprofen, flurbiprofen, indometacin and ibuprofe; anionic dyes: congo red, orange g; cationic dyes: methylene blue, rhodamine b) and inorganic cation (Cu²⁺, Pb²⁺) residues due to their novel hierarchical and submicroscopic structures. Further, 3D ZIF-8@NiAl-LDHs as filter membrane to extraction four kind of trace anti-inflammatory drugs followed by direct quantification detection of targets with HPLC was demonstrated. The validated method was successfully applied for analysis of four anti-inflammatory drugs in environmental water and human urine samples. This work provided a feasible way to design and construct purification materials for wastewater treatment and contaminant detection.

Ultrathin dodecyl-sulfate-intercalated Mg-Al layered double hydroxide nanosheets with high adsorption capability for dye pollution

A high-performance dye adsorbent of ultrathin dodecyl-sulfate (DS^-) intercalated Mg-Al layered double hydroxide nanosheets (DI-LDH Ns) were controllably synthesized by a simple one-step surfactant-assisted hydrothermal method. The unique intercalated structure with week interlayer interaction and high accessible surface of DI-LDH Ns provide efficient adsorption of methyl orange (MO), leading to its superior performance with much higher uptake capability (846.6 mg/g at 298 K) and less adsorbing equilibrium time (5 min) than those of ultrathin DS^--surface-modified Mg-Al-LDH nanosheets (DM-LDH Ns, 327.4 mg/g at 298 K, 120 min) and original Mg-Al-LDH (O-LDH, 208.2 mg/g at 298 K, 120 min). The composition and structure of these LDHs were investigated by systematic physicochemical characterization, such as XRD, TEM, FT-IR, BET and TGA. The adsorption behavior of DI-LDH Ns follows the Langmuir isotherm equation. A plausible mechanism is proposed to explain the adsorption process of such DI-LDH Ns, in which the synergistic contributions of surface and interlayer adsorption between DI-LDH Ns and MO play an important role. This study puts forward a new thought for the development of high-performance LDH adsorbents with an ultrathin intercalated structure for the efficient and rapid removal of dyes.

Unravelling the distinct surface interactions of modified graphene nanostructures with methylene blue dye through experimental and computational approaches

Nanoscopic modifications leading to multi-dimensional graphene structures are known to significantly influence their candidature for several applications including catalysis, energy storage, molecular sensing and most significantly adsorption and remediation of harmful materials such as dyes. The present work attempts to identify the key trajectories that connect the structural qualification with a chosen application, viz., the interactive forces in dye remediation. Various physico-chemically Modified Graphene Nanostructures (MGNs) such as 2 dimensional Graphite, Graphene Oxide (GO), reduced GO (rGO), holey rGO, and 3 dimensional GO hydrogel and Holey GO hydrogel are chosen and synthesised herein. These represent varieties of physicochemical features with respect to their dimensionality, surface features such as oxygen functionality, nanoscopic holes etc., that contribute to their characteristic overall surface interactions. Methylene Blue (MB), a popular industrial effluent posing major environmental concern is chosen to be a probe adsorbate in this case study. An exclusive real time in-situ UV visible spectral experiment provides the revealing reasons behind the outstanding performance of 2D GO sheets with an adsorption capacity of greater than 92 % even at high MB concentrations (>2000 ppm). A complex dependency of various factors such as surface oxygen, morphology, nanoporosity etc. on the unique overall interaction with an adsorbent such as MB by all these adsorbates is demonstrated using experimental and DFT based computational studies. Electrostatics and hydrogen bonding are understood to be the two dominant forces driving the MB adsorption on the best performing GO here.

Mg–Al-Layered Double Hydroxide (LDH) Modified Diatoms for Highly Efficient Removal of Congo Red from Aqueous Solution

In this work, diatomaceous earth (DE) or diatoms are modified with Mg–Al-layered double hydroxide (DE-LDH) using the facile co-precipitation method to demonstrate their application for the removal of toxic dyes such as Congo Red (CR), which was used as a model. Field emission scanning electron microscopy (FE-SEM) characterization confirms the successful modification of diatom microcapsules structures, showing their surface decorated with LDH nano patches with sheet-like morphologies. The surface area of the DE was enhanced from 28 to 51 m2/g after modification with LDH. The adsorption studies showed that the maximum CR removal efficiency of DE and DE-LDH was ~15% and ~98%, respectively at pH 7, which is a significant improvement compared with unmodified DE. The maximum adsorption capacities of DE-LDH were improved ten times (305.8 mg/g) compared with the bare DE (23.2 mg/g), showing very high adsorption performances. The recyclability study of DE-LDH up to five cycles, after desorbing CR either by methanol or by NaOH, showed the efficient removal of the CR by up to three cycles via adsorption. The presented study suggests the promising application of DE-LDH as an effective material for application in the removal of CR from aqueous solutions for industrial wastewater treatment.

Construction of Bi2O3/CuNiFe LDHs composite and its enhanced photocatalytic degradation of lomefloxacin with persulfate under simulated sunlight

Advanced oxidation methods based on photocatalysis and sulfate radicals have attached most interest towards contaminant degradation. However, there are a lack of coupling two methods in the field of pollutant degradation. In the present study, a new Bi₂O₃/CuNiFe LDHs composite was fabricated and it could efficiently activate persulfate (PS) for lomefloxacin (LOM) decomposition under simulated sunlight, in which 84.6% of LOM (10 mg·L^-1) was degraded over 40 min with 0.4 g·L^-1 of Bi₂O₃/CuNiFe LDHs composite and 0.74 mM of PS at natural pH. In addition, the Bi₂O₃/CuNiFe LDHs composite possessed good reusability and stability at least four runs. Moreover, active radical scavenging experiments indicated that hydroxyl radicals (HO·), sulfate radicals (SO₄·^-), superoxide radicals (O₂·^-) and hole (h⁺) were the main radicals under LOM degradation process. Subsequently, the possible degradation intermediates were determined and the decomposition pathways were put forward. At the same time, activated sludge inhibition experiments were performed to assess the variation of toxicity of LOM and its degradation intermediates during oxidation. Finally, possible reaction mechanism of Bi₂O₃/CuNiFe LDHs composite for PS activation under simulated sunlight was proposed.

Preparation of a carboxymethyl β-cyclodextrin polymer and its rapid adsorption performance for basic fuchsin

The presence of dyes in a water system has potential adverse effects on the ecological environment. The conventional cyclodextrin (CD) polymer only has CD cavities as adsorption sites and exhibits slow adsorption for dye removal. In this study, we designed a novel carboxymethyl β-CD polymer (β-CDP-COOH). The structural properties of β-CDP-COOH were characterized as an irregular cross-linked polymer with negative surface charge, and the introduction of carboxymethyl groups greatly enhanced the adsorption ability of the β-CD polymer to basic fuchsin (BF). The maximum removal efficiency of β-CDP-COOH (96%) could be achieved within 1 min, whereas that of conventional β-CD polymer (70%) was achieved after 50 min. The adsorption mechanism revealed that the adsorption behavior of β-CDP-COOH could be effectively fitted with the pseudo-second-order kinetic model and Langmuir isotherm. Both CD cavities and carboxymethyl groups were effective adsorption sites, so β-CDP-COOH had an advantage in adsorption capacity over the conventional β-CD polymer. This study indicated that β-CDP-COOH is a potential highly efficient adsorbent for the removal of cationic dye contaminants.

Introduction of carboxymethyl groups greatly accelerated the adsorption rate of a β-CD polymer, and the removal efficiency reached 96% within 1 minute.