Ionic liquids: the link to high-temperature molten salts?

NaDES Application in Cosmetic and Pharmaceutical Fields: An Overview

Natural deep eutectic solvents (NaDES) represent a new generation of green, non-flammable solvents, useful as an efficient alternative to the well-known ionic liquids. They can be easily prepared and exhibit unexpected solubilizing power for lipophilic molecules, although those of a hydrophilic nature are mostly used. For their unique properties, they can be recommend for different cosmetic and pharmaceutical applications, ranging from sustainable extraction, obtaining ready-to-use ingredients, to the development of biocompatible drug delivery responsive systems. In the biomedical field, NaDES can be used as biopolymer modifiers, acting as delivery compounds also known as "therapeutic deep eutectic systems", being able to solubilize and stabilize different chemical and galenical formulations. The aim of this review is to give an overview of the current knowledge regarding natural deep eutectic solvents specifically applied in the cosmetic and pharmaceutical fields. The work could help to disclose new opportunities and challenges for their implementation not only as green alternative solvents but also as potential useful pathways to deliver bioactive ingredients in innovative formulations.

The effects of ionic liquids on the ethanolysis of a chloroacenaphthene. Evaluation of the effectiveness of nucleofugality data to predict reaction outcome

The reaction of a chlorobenzene in mixtures containing ethanol and eight different ionic liquids was investigated in order to understand the effects of varying proportions and constituent ions of an ionic liquid on the rate constant of the process. The results were found to be generally consistent with previously studied reactions of the same type, with small proportions of an ionic liquid resulting in a rate constant increase compared to ethanol and large proportions causing a rate constant decrease. Temperature dependent kinetic studies were used to interpret the changes in reaction outcome, particularly noting an entropic cost on moving to high proportions of ionic liquid, consistent with organisation of solvent around the transition state. While attempts to use empirical solvent parameters to correlate outcome with the ionic liquid used were unsuccessful, use of recently acquired nucleofugality data for chloride and estimations for the electrofuge allowed for excellent prediction of the effects of ionic liquids, with rate constants quantitatively predicted in systems containing both different proportions of ionic liquid (mean absolute error (MAE) log(k₁) = 0.11) and different ionic liquids (MAE log(k₁) = 0.33). Importantly, this demonstrates the ready application of these quantitative reactivity parameters.

Recent Advances in Electrochemical-Based Silicon Production Technologies with Reduced Carbon Emission

Sustainable and low-carbon-emission silicon production is currently one of the main focuses for the metallurgical and materials science communities. Electrochemistry, considered a promising strategy, has been explored to produce silicon due to prominent advantages: (a) high electricity utilization efficiency; (b) low-cost silica as a raw material; and (c) tunable morphologies and structures, including films, nanowires, and nanotubes. This review begins with a summary of early research on the extraction of silicon by electrochemistry. Emphasis has been placed on the electro-deoxidation and dissolution-electrodeposition of silica in chloride molten salts since the 21st century, including the basic reaction mechanisms, the fabrication of photoactive Si films for solar cells, the design and production of nano-Si and various silicon components for energy conversion, as well as storage applications. Besides, the feasibility of silicon electrodeposition in room-temperature ionic liquids and its unique opportunities are evaluated. On this basis, the challenges and future research directions for silicon electrochemical production strategies are proposed and discussed, which are essential to achieve large-scale sustainable production of silicon by electrochemistry.

Influence of ionic liquids on the electronic environment of atomically dispersed Ir on (MgO) (100)

Recently, ionic liquids (ILs) have been used as ligands for single-site Ir(CO)2 complexes bound to metal-oxide supports because of their electron-donor/acceptor capacities. The combined effects of supports and ILs as...

Eutectics: formation, properties, and applications

Various eutectic systems have been proposed and studied over the past few decades. Most of the studies have focused on three typical types of eutectics: eutectic metals, eutectic salts, and deep eutectic solvents. On the one hand, they are all eutectic systems, and their eutectic principle is the same. On the other hand, they are representative of metals, inorganic salts, and organic substances, respectively. They have applications in almost all fields related to chemistry. Their different but overlapping applications stem from their very different properties. In addition, the proposal of new eutectic systems has greatly boosted the development of cross-field research involving chemistry, materials, engineering, and energy. The goal of this review is to provide a comprehensive overview of these typical eutectics and describe task-specific strategies to address growing demands.

A Review on the Electrodeposition of Aluminum and Aluminum Alloys in Ionic Liquids

Aluminum plays an essential role as an excellent coating material in diversified applications due to its better corrosion resistance and physicochemical properties. Employing such a material as a coating on different metallic substrates such as carbon steel would benefit many industries such as the automotive, aviation, shipbuilding, construction, electronics etc. Amongst the various available coating techniques, electrodeposition of aluminum (Al) Al alloys have gained significant attention in the last 10 years as a metallic protection coating for various commercial substrates and has become the industry’s choice owing to being lightweight, corrosion-resistant, and cost-effective. This paper shall provide a detailed review covering electrochemical deposition of Al and Al alloys using ionic liquids with various cations, anions, and additives, and reports on progress in development thus far. It shall also cover the challenges in the electrodepositing aluminum, its alloys on light weight metal substrates viz., magnesium (Mg), commercial substrates such as low carbon steel, spring steel, and their pretreatments. The factors that play an important role in electroplating on an industrial scale, along with future challenges, are discussed.

Deep Eutectic Solvents: A Review of Fundamentals and Applications

Deep eutectic solvents (DESs) are an emerging class of mixtures characterized by significant depressions in melting points compared to those of the neat constituent components. These materials are promising for applications as inexpensive "designer" solvents exhibiting a host of tunable physicochemical properties. A detailed review of the current literature reveals the lack of predictive understanding of the microscopic mechanisms that govern the structure-property relationships in this class of solvents. Complex hydrogen bonding is postulated as the root cause of their melting point depressions and physicochemical properties; to understand these hydrogen bonded networks, it is imperative to study these systems as dynamic entities using both simulations and experiments. This review emphasizes recent research efforts in order to elucidate the next steps needed to develop a fundamental framework needed for a deeper understanding of DESs. It covers recent developments in DES research, frames outstanding scientific questions, and identifies promising research thrusts aligned with the advancement of the field toward predictive models and fundamental understanding of these solvents.

Ionic Liquids as Solvents for SN 2 Processes. Demonstration of the Complex Interplay of Interactions Resulting in the Observed Solvent Effects

Bimolecular nucleophilic substitution reactions between triphenylphosphine and benzylic electrophiles have been examined in an ionic liquid to probe interactions with species along the reaction coordinate. Trends in the rate constant were found on both varying the leaving group and the electronic nature of the aromatic ring. In all the cases considered, interactions between the components of the ionic liquid and the transition state were shown to be more significant in determining reaction outcome than previously observed for this class of reaction. This demonstrates the importance of considering interactions of the ionic liquid components with all species along the reaction coordinate when investigating the origin of ionic liquid solvent effects, along with how such effects might be exploited.

Investigating Variation of the Pnicogen Nucleophilic Heteroatom on Ionic Liquid Solvent Effects in Bimolecular Nucleophilic Substitution Processes

A series of nucleophiles containing Group 15 nucleophilic heteroatoms has been used to expand and develop the current understanding of ionic liquid solvent effects on bimolecular nucleophilic substitution processes. It was found that when using arsenic-, antimony- and bismuth-based nucleophiles, rate constant enhancement was observed for all solvent compositions containing ionic liquids. This rate constant enhancement was driven by ionic liquid/transition state interactions, which contrasts with previous studies on earlier Group 15 nucleophiles. This study provides a holistic understanding and augments the predictive framework for the effects of ionic liquids on bimolecular nucleophilic substitution processes, with the potential for these periodic trends to be broadly applied.

Understanding the effects of solvate ionic liquids as solvents on substitution processes

The effects of solvate ionic liquids as solvents have been considered for two substitution processes where the solvent effects of typical ionic liquids have been extensively investigated previously; the bimolecular nucleophilic substitution (SN2) reaction between pyridine and benzyl bromide and the nucleophilic aromatic substitution (SNAr) reaction between ethanol and 1-fluoro-2,4-dinitrobenzene. It was found that use of solvate ionic liquids gave rise to similar trends in the activation parameters for both substitution processes as typical ionic liquids, implying the microscopic interactions responsible for the effects were the same. However, different effects on the rate constants compared to typical ionic liquids were observed due to the changes in the balance of enthalpic and entropic contributions to the observed rate constants. From these data it is clear that the reaction outcome for both of these substitution reactions fall within the 'predictive framework' established in previous studies with a cautionary tale or two of their own to add to the general knowledge of ionic liquid solvent effects for these processes, particularly with respect to potential reactivity of the solvate ionic liquids themselves.

The Dependence of Ionic Liquid Solvent Effects on the Nucleophilic Heteroatom in SN Ar Reactions. Highlighting the Potential for Control of Selectivity

Nucleophilic aromatic substitution (S_N Ar) reactions of 1-fluoro-4-nitrobenzene using similar nitrogen and sulfur nucleophiles were studied through extensive kinetic analysis in mixtures containing ionic liquids. The interactions of the ionic liquid components with the starting materials and transition state for each process were investigated in an attempt to construct a broad predictive framework for how ionic liquids affect reaction outcome. It was found that, based on the activation parameters, the microscopic interactions and thus the ionic liquid solvent effect were different for each of the nucleophiles considered. The results from this study suggest that it may be possible to rationally select a given ionic liquid mixture to selectively control reaction outcome of an S_N Ar reaction where multiple nucleophiles are present.

Role of ionic liquids on the selectivity and the rate of organic reactions: A computational approach

In the last years, ionic liquids have been used as substitutes to common solvents since they combine good solubility properties with small vapor pressures. Herein, the Diels-Alder reactions of cyclopentadiene (CP) with acrolein, methyl acrylate and acrylonitrile in ionic liquids ([Emim][N(Tf)₂]), ([Hbim][N(Tf)₂]) and ([Bmim][OTf]) have been modeled with density functional theory to explore the effect of ionic liquids on the endo selectivity in the adducts. Besides the hydogen bonding interactions between the cation and the diene in all the structures, endo transition structures are slightly better stabilized than exo transition structures because of the favorable interactions between the H's of the CP ring and the O's of the [N(Tf)₂]^- and [OTf]^- anions of the IL's. In this study, B3LYP/6-31 + G* and M06-2X/6-31 + G* calculations have demonstrated that endo selectivity in the Diels-Alder reactions can be achieved in the presence of ionic liquids in agreement with experiments.

Understanding the effects of ionic liquids on a unimolecular substitution process: correlating solvent parameters with reaction outcome

The polarisability of an ionic liquid is key in determining the rate constant of a unimolecular substitution process.

Probing the Surface Tension of Ionic Liquids Using the Langmuir Principle

At 298 K, the surface tension of ionic liquids (ILs) of the 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide series, [C _nC₁Im][NTf₂], ranges from around 35 mN·m^-1 for [C₂C₁Im][NTf₂] to just below 30 mN·m^-1 for [C₁₂C₁Im][NTf₂]. However, the decrease rate along the series is not constant: a large decrease from [C₂C₁Im][NTf₂] to [C₈C₁Im][NTf₂] is followed by almost constant values from [C₈C₁Im][NTf₂] to [C₁₂C₁Im][NTf₂]. Such behavior is hard to interpret from a molecular point of view without suitable information about the free-surface structure of the different ILs. In this work, we have successfully used the Langmuir principle in combination with structural data obtained from angle-resolved X-ray photoelectron spectroscopy experiments and molecular dynamics simulations, to predict the correct surface tension trend along the IL series. The concepts unveiled for this particular homologous IL family can be easily extended to other systems.

Green effervescence assisted dispersive liquid–liquid microextraction based on a hydrophobic deep eutectic solvent for determination of Sunset Yellow and Brilliant Blue FCF in food samples

In this study, a simple, fast and sensitive method called effervescence assisted dispersive liquid–liquid microextraction based on a hydrophobic deep eutectic solvent (EADLLME-DES) was used to extract synthetic dyes from food samples.

High-pressure salt templating strategy toward intact isochoric hierarchically porous carbon monoliths from ionic liquids

Using a high-pressure salt templating approach, a crack-free, hierarchically porous carbon monolith with good monolithic formability and integrity was prepared from an ionic liquid.

Rationalising the effects of ionic liquids on a nucleophilic aromatic substitution reaction

The nucleophilic aromatic substitution reaction between 1-fluoro-2,4-dinitrobenzene and ethanol was examined in a series of ionic liquids across a range of mole fractions.

Experimental Insight into the Thermodynamics of the Dissolution of Electrolytes in Room-Temperature Ionic Liquids: From the Mass Action Law to the Absolute Standard Chemical Potential of a Proton

Room-temperature ionic liquids (ILs) are a class of nonaqueous solvents that have expanded the realm of modern chemistry, drawing increasing interest over the last few decades, not only in terms of their own unique physical chemistry but also in many applications including organic synthesis, electrochemistry, and biological systems, wherein charged solutes (i.e., electrolytes) often play vital roles. However, our fundamental understanding of the dissolution of an electrolyte in an IL is still rather limited. For example, the activity of a charged species has frequently been assumed to be unity without a clear experimental basis. In this study, we have discussed a standard component-based scheme for the dissolution of an electrolyte in an IL, supported by our observation of ideal Nernstian responses for the reduction of silver and ferrocenium salts in a representative IL, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([emim⁺][NTf₂ ^-] or [emim⁺][TFSI^-]). Using this scheme, which was also supported by temperature-dependent measurements with ILs having longer alkyl chains in the imidazolium ring, and the solubility of the IL in water, we established the concept of Gibbs transfer energies of "pseudo-single ions" from the IL to conventional neutral molecular solvents (water, acetonitrile, and methanol). This concept, which bridges component- and constituent-based energetics, utilizes an extrathermodynamic assumption, which itself was justified by experimental observations. These energies enable us to eliminate inner potential differences between the IL and molecular solvents (solvent-solvent interactions), that is, on a practical level, conditional liquid junction potential differences, so that we can discuss ion-solvent interactions independently. Specifically, we have examined the standard electrode potential of the ferrocenium/ferrocene redox couple, Fc⁺/Fc, and the absolute intrinsic standard chemical potential of a proton in [emim⁺][NTf₂ ^-], finding that the proton is more acidic in the IL than in water by 6.5 ± 0.6 units on the unified pH scale. These results strengthen the progress on the physical chemistry of ions in IL solvent systems on the basis of their activities, providing a rigorous thermodynamic framework.

Translational and Rotational Diffusion of Two Differently Charged Solutes in Ethylammonium Nitrate-Methanol Mixture: Does the Nanostructure of the Amphiphiles Influence the Motion of the Solute?

In this Article, we have investigated the translational and rotational diffusion of two structurally similar but differently charged solutes (rhodamine 6G perchlorate and fluorescein sodium salt) in ethylammonium nitrate (EAN)-methanol (CH3OH) mixture to understand the effect of added ionic liquid on the motion of the solutes. EAN and CH3OH both are amphiphilic molecules and characterized by an extended hydrogen bonding network. Recently, Russina et al. found that a wide distribution of clusters exist in the CH3OH rich region (0.10 ≤ χEAN ≤ 0.15) and EAN molecules preserve their bulk-sponge-like morphology (Russina, O.; Sferrazza, A.; Caminiti, R.; Triolo, A. J. Phys. Chem. Lett. 2014, 5, 1738-1742). The effect of this microheterogeneous mixture on the solute's motion shows some interesting results compared to other PIL (protic ionic liquid)-cosolvent mixtures. Analysis of the time-resolved anisotropy data with the aid of Stokes-Einstein-Debye (SED) hydrodynamic theory predicts that the reorientation time of both of the solutes appears close to the stick hydrodynamic line in the methanol rich region. The hydrogen bond accepting solutes experience specific interaction with CH3OH, and with increasing concentration of EAN, the specific interaction between the solute and solvent molecules is decreased while the decrease is more prominent in the low mole fraction of EAN due to the large size of cluster formation. The temperature dependent anisotropy measurements show that the hydrogen bonding interaction between EAN and CH3OH is increased with increasing temperature. Moreover, fluorescence correlation spectroscopy (FCS) shows the dynamic heterogeneity of the mixture which is due to the segregation of the alkyl chain of the PIL. Formation of a large cluster at a low mole fraction of IL (0.10 ≤ χEAN ≤ 0.15) can be proved by the insensitivity of the translational diffusion and rotational activation energy of the solutes to the concentration of EAN. Thus, the result of the work suggests that the addition of EAN to the CH3OH affects the specific interaction between solute and solvent and, as a consequence, the translational motion as well as the rotational motion of the solutes are modulated.

NMR spectroscopy to follow reaction progress in ionic liquids

In order to understand reaction outcomes in ionic liquids, it is crucial to be able to follow the progress of these reactions. This review highlights the advantages of NMR spectroscopy over other analytical techniques in following reaction progress in ionic liquids, particularly addressing the practical aspects of the methodology and highlighting the range of processes that can be readily followed. Copyright © 2014 John Wiley & Sons, Ltd.

Nitrogen versus phosphorus nucleophiles – how changing the nucleophilic heteroatom affects ionic liquid solvent effects in bimolecular nucleophilic substitution processes

Changing the nucleophile gave different ionic liquid effects, showing the importance of interactions with all species along the reaction coordinate.

Synthesis, structure and near-infrared photoluminescence of hexanitratoneodymate ionic liquids

Five hexanitratoneodymate-based rare earth complexes () were synthesized using a straightforward method. Purple plate crystals of were isolated and the crystal structure was determined by single-crystal X-ray diffraction with respect to the coordination mode of the nitrate anion to the central Nd(iii) ion. (: monoclinic system P21/c, a = 15.9460(3) Å, b = 10.2457(6) Å, c = 33.323(3) Å, β = 91.8108(17)°, V = 3109.11(11) Å(3), Z = 4). The central Nd(iii) ion is surrounded by six bidentate nitrate ligands, with a major trend towards high symmetry of the [Nd(NO3)6](3-) anion as an icosahedron. Thermal properties were determined from differential scanning calorimetry (DSC) combined with thermogravimetric analysis (TGA) tests. Complexes are found to be room temperature liquids, and their excitation and emission spectra were recorded. These complexes exhibit intense near-infrared (NIR) luminescence emission, which originates from interconfigurational f-f transitions (4)F3/2→(4)IJ multiplet (J = 9/2-13/2). These liquid Nd(iii) complexes are of interest as potential NIR luminescent soft materials with high thermal stability.

Microscopic study of the corrosion behaviour of mild steel in ionic liquids for CO2 capture applications

Exposure of mild steel to ionic liquids (IL) results in two main types of degradation that may be significantly limited by addition of molybdate without affecting the IL's CO₂ capture performance.

Ion structure controls ionic liquid near-surface and interfacial nanostructure

A unique, but unifying, feature of ionic liquids (ILs) is that they are nanostructured on the length scale of the ions; in many ILs well-defined polar and apolar domains exist and may percolate through the liquid. Near a surface the isotropic symmetry of the bulk structure is broken, resulting in different nanostructures which, until now, have only been studied indirectly. In this paper, in situ amplitude modulated atomic force microscopy (AM-AFM) has been used to resolve the 3-dimensional nanostructure of five protic ILs at and near the surface of mica. The surface and near surface structures are distinct and remarkably well-defined, but are very different from previously accepted descriptions. Interfacial nanostructure is strongly influenced by the registry between cations and the mica surface charge sites, whereas near surface nanostructure is sensitive to both cation and anion structure. Together these ILs reveal how interfacial nanostructure can be tuned through ion structure, informing "bottom-up" design and optimisation of ILs for diverse technologies including heterogeneous catalysis, lubrication, electrochemical processes, and nanofluids.

Ionic liquid effects on a multistep process. Increased product formation due to enhancement of all steps

An ionic liquid is shown to increase the rate of all three steps in this imine formation and the microscopic origins of such are investigated. The magnitude of this enhancement varies with the nature of the substituent, though in all cases the rate of imine formation is increased.

Developing principles for predicting ionic liquid effects on reaction outcome. The importance of the anion in controlling microscopic interactions

Predictable changes in the rate constant of a condensation reaction were seen as the solvent composition was varied. The cation–nucleophile interaction could be controlled in a predictable manner; activation parameters varied linearly with the H-bond acceptor ability of the anions used.

Computational approaches to understanding reaction outcomes of organic processes in ionic liquids

The utility of using a combined experimental and computational approach for understanding ionic liquid media, and their effect on reaction outcome, is highlighted through a number of case studies.

Effect of Modifying the Anion of an Ionic Liquid on the Outcome of an SN2 Process

The effect of a series of ionic liquids containing different anions (bis(trifluoromethanesulfonyl)imide, dicyanimide, hexafluorophosphate, tetrafluoroborate, and bromide) on the rate constant of a bimolecular substitution process was investigated. A general ionic liquid effect was noted, with increases in the rate constant observed in all ionic liquids used when compared with that in acetonitrile. Temperature-dependent kinetic data allowed calculation of activation parameters in each of the reaction mixtures considered; these parameters showed that the microscopic origins of the rate enhancements observed were not the same for all of the ionic liquids used, demonstrating the importance of the nature of the anion.