Preparation of characterization of poly(ethylene glycol) vinyl sulfone

Striving for Uniformity: A Review on Advances and Challenges To Achieve Uniform Polyethylene Glycol

Poly(ethylene glycol) (PEG) is the polymer of choice in drug delivery systems due to its biocompatibility and hydrophilicity. For over 20 years, this polymer has been widely used in the drug delivery of small drugs, proteins, oligonucleotides, and liposomes, improving the stability and pharmacokinetics of many drugs. However, despite the extensive clinical experience with PEG, concerns have emerged related to its use. These include hypersensitivity, purity, and nonbiodegradability. Moreover, conventional PEG is a mixture of polymers that can complicate drug synthesis and purification leading to unwanted immunogenic reactions. Studies have shown that uniform PEGylated drugs may be more effective than conventional PEGylated drugs as they can overcome issues related to molecular heterogeneity and immunogenicity. This has led to significant research efforts to develop synthetic procedures to produce uniform PEGs (monodisperse PEGs). As a result, iterative step-by-step controlled synthesis methods have been created over time and have shown promising results. Nonetheless, these procedures have presented numerous challenges due to their iterative nature and the requirement for multiple purification steps, resulting in increased costs and time consumption. Despite these challenges, the synthetic procedures went through several improvements. This review summarizes and discusses recent advances in the synthesis of uniform PEGs and its derivatives with a focus on overall yields, scalability, and purity of the polymers. Additionally, the available characterization methods for assessing polymer monodispersity are discussed as well as uniform PEG applications, side effects, and possible alternative polymers that can overcome the drawbacks.

Hydrogel Cross-Linking via Thiol-Reactive Pyridazinediones

Thiol-reactive Michael acceptors are commonly used for the formation of chemically cross-linked hydrogels. In this paper, we address the drawbacks of many Michael acceptors by introducing pyridazinediones as new cross-linking agents. Through the use of pyridazinediones and their mono- or dibrominated analogues, we show that the mechanical strength, swelling ratio, and rate of gelation can all be controlled in a pH-sensitive manner. Moreover, we demonstrate that the degradation of pyridazinedione-gels can be induced by the addition of thiols, thus providing a route to responsive or dynamic gels, and that monobromo-pyridazinedione gels are able to support the proliferation of human cells. We anticipate that our results will provide a valuable and complementary addition to the existing toolkit of cross-linking agents, allowing researchers to tune and rationally design the properties of biomedical hydrogels.

Surface Functionalization Strategies of Polystyrene for the Development Peptide-Based Toxin Recognition

The development of a robust surface functionalization method is indispensable in controlling the efficiency, sensitivity, and stability of a detection system. Polystyrene (PS) has been used as a support material in various biomedical fields. Here, we report various strategies of polystyrene surface functionalization using siloxane derivative, divinyl sulfone, cyanogen bromide, and carbonyl diimidazole for the immobilization of biological recognition elements (peptide developed to detect ochratoxin A) for a binding assay with ochratoxin A (OTA). Our objective is to develop future detection systems that would use polystyrene cuvettes such as immobilization support of biological recognition elements. The goal of this article is to demonstrate the proof of concept of this immobilization support. The results obtained reveal the successful modification of polystyrene surfaces with the coupling agents. Furthermore, the immobilization of biological recognition elements, for the OTA binding assay with horseradish peroxidase conjugated to ochratoxin A (OTA-HRP) also confirms that the characteristics of the functionalized peptide immobilized on polystyrene retains its ability to bind to its ligand. The presented strategies on the functionalization of polystyrene surfaces will offer alternatives to the possibilities of immobilizing biomolecules with excellent order- forming monolayers, due to their robust surface chemistries and validate a proof of concept for the development of highly efficient, sensitive, and stable future biosensors for food or water pollution monitoring.

Tissue Engineering in Gynecology

Female gynecological organ dysfunction can cause infertility and psychological distress, decreasing the quality of life of affected women. Incidence is constantly increasing due to growing rates of cancer and increase of childbearing age in the developed world. Current treatments are often unable to restore organ function, and occasionally are the cause of female infertility. Alternative treatment options are currently being developed in order to face the inadequacy of current practices. In this review, pathologies and current treatments of gynecological organs (ovaries, uterus, and vagina) are described. State-of-the-art of tissue engineering alternatives to common practices are evaluated with a focus on in vivo models. Tissue engineering is an ever-expanding field, integrating various domains of modern science to create sophisticated tissue substitutes in the hope of repairing or replacing dysfunctional organs using autologous cells. Its application to gynecology has the potential of restoring female fertility and sexual wellbeing.

An overview of chemo- and site-selectivity aspects in the chemical conjugation of proteins

The bioconjugation of proteins-that is, the creation of a covalent link between a protein and any other molecule-has been studied for decades, partly because of the numerous applications of protein conjugates, but also due to the technical challenge it represents. Indeed, proteins possess inner physico-chemical properties-they are sensitive and polynucleophilic macromolecules-that make them complex substrates in conjugation reactions. This complexity arises from the mild conditions imposed by their sensitivity but also from selectivity issues, viz the precise control of the conjugation site on the protein. After decades of research, strategies and reagents have been developed to address two aspects of this selectivity: chemoselectivity-harnessing the reacting chemical functionality-and site-selectivity-controlling the reacting amino acid residue-most notably thanks to the participation of synthetic chemistry in this effort. This review offers an overview of these chemical bioconjugation strategies, insisting on those employing native proteins as substrates, and shows that the field is active and exciting, especially for synthetic chemists seeking new challenges.

Gated Photoreactivity of Pyrene Copolymers in Multiresponsive Cross-Linked starPEG-Hydrogels

The synthesis and manufacturing of multiresponsive polymer hydrogels using simple components is a notable challenge. Pyrene is an excimer-forming fluorophore mostly used as microenvironmental probe and for the localization of molecules in close proximity in artificial and biomaterials. Here we make use of the solvophobic preaggregation and photolysis properties of pyrene to construct multiresponsive hydrogels. We synthesize poly(ethylene glycol) (PEG) hydrogels from well-defined pyrene-substituted macro-cross-linkers and elucidate their intricate intra- and intermolecular excimer formation pathways. We find that controlling the water content of the hydrogels through the degree of swelling acts as a gating stimulus governing the photoinduced solvolysis of pyrenylmethyl esters from their poly(methacrylate) backbone. This allows the implementation of a simple transient photolithography process. We thus demonstrate that multiresponsive soft materials with complex optical and mechanical responses can be obtained with comparatively little synthetic effort.

One-Step Synthesis of [18F]Fluoro-4-(vinylsulfonyl)benzene: A Thiol Reactive Synthon for Selective Radiofluorination of Peptides

Radiolabeled peptide-based molecular imaging probes exploit the advantages of large biologics and small molecules, providing both exquisite selectivity and favorable pharmacokinetic properties. Here, we report an operationally simple and broadly applicable approach for the ¹⁸F-fluorination of unprotected peptides via a new radiosynthon, [¹⁸F]fluoro-4-(vinylsulfonyl)benzene. This reagent demonstrates excellent chemoselectivity at the cysteine residue and rapid ¹⁸F-labeling of a diverse scope of peptides to generate stable thioether constructs.

Morphogenesis Guided by 3D Patterning of Growth Factors in Biological Matrices

Three-dimensional (3D) control over the placement of bioactive cues is fundamental to understand cell guidance and develop engineered tissues. Two-photon patterning (2PP) provides such placement at micro- to millimeter scale, but nonspecific interactions between proteins and functionalized extracellular matrices (ECMs) restrict its use. Here, a 2PP system based on nonfouling hydrophilic photocages and Sortase A (SA)-based enzymatic coupling is presented, which offers unprecedented orthogonality and signal-to-noise ratio in both inert hydrogels and complex mammalian matrices. Improved photocaged peptide synthesis and protein functionalization protocols with broad applicability are introduced. Importantly, the method enables 2PP in a single step in the presence of fragile biomolecules and cells, and is compatible with time-controlled growth factor presentation. As a corollary, the guidance of axons through 3D-patterned nerve growth factor (NGF) within brain-mimetic ECMs is demonstrated. The approach allows for the interrogation of the role of complex signaling molecules in 3D matrices, thus helping to better understand biological guidance in tissue development and regeneration.

High modulus, enzyme-degradable poly(trimethylene carbonate)-peptide biohybrid networks formed from triblock prepolymers

Biohybrid networks have the potential to have stiffnesses equivalent to that of native soft connective tissues as well as cell-mediated degradation behavior. Most strategies to generate such materials to date have utilized crosslinking of two separate and orthogonally functionalized polymers. Herein we describe a triblock prepolymer consisting of a central enzyme degradable peptide block flanked by two synthetic, hydrolysis resistant poly(trimethylene carbonate) blocks (PTMC) or poly(ethylene glycol)-PTMC blocks terminated in methacrylate groups. To form these prepolymers heterobifunctional PTMC and PEG-PTMC were prepared, possessing a vinyl sulfone terminus and a methacrylate terminus. These polymers were conjugated to a di-cysteine containing peptide through a Michael-type addition to form cross-linkable prepolymers. These prepolymers were then photo-cured to form enzyme degradable networks. The compressive moduli of the resulting water swollen networks was within the range of many soft connective tissues and was inversely proportional to the water solubility of the prepolymers. The prepolymer water solubility in turn could be tuned by adjusting PTMC molecular weight or by the addition of a PEG block. In vitro degradation only occurred in the presence of matrix metalloproteinases, and was fastest for networks prepared with prepolymers of higher water solubility.

Azabicyclic vinyl sulfones for residue-specific dual protein labelling

We have developed [2.2.1]azabicyclic vinyl sulfone reagents that simultaneously enable cysteine-selective protein modification and introduce a handle for further bioorthogonal ligation.

We have developed [2.2.1]azabicyclic vinyl sulfone reagents that simultaneously enable cysteine-selective protein modification and introduce a handle for further bioorthogonal ligation. The reaction is fast and selective for cysteine relative to other amino acids that have nucleophilic side-chains, and the formed products are stable in human plasma and are moderately resistant to retro Diels–Alder degradation reactions. A model biotinylated [2.2.1]azabicyclic vinyl sulfone reagent was shown to efficiently label two cysteine-tagged proteins, ubiquitin and C2Am, under mild conditions (1–5 equiv. of reagent in NaP_i pH 7.0, room temperature, 30 min). The resulting thioether-linked conjugates were stable and retained the native activity of the proteins. Finally, the dienophile present in the azabicyclic moiety on a functionalised C2Am protein could be fluorescently labelled through an inverse electron demand Diels–Alder reaction in cells to allow selective apoptosis imaging. The combined advantages of directness, site-specificity and easy preparation mean [2.2.1]azabicyclic vinyl sulfones can be used for residue-specific dual protein labelling/construction strategies with minimal perturbation of native function based simply on the attachment of an [2.2.1]azabicyclic moiety to cysteine.

"Smart" chemistry and its application in peroxidase immobilization using different support materials

In the past few decades, the enzyme immobilization technology has been exploited a lot and thus became a matter of rational design. Immobilization is an alternative approach to bio-catalysis with the added benefits, adaptability to automation and high-throughput applications. Immobilization-based approaches represent simple but effective routes for engineering enzyme catalysts with higher activities than wild-type or pristine counterparts. From the chemistry viewpoint, the concept of stabilization via manipulation of functional entities, the enzyme surfaces have been an important driving force for immobilizing purposes. In addition, the unique physiochemical and structural functionalities of pristine or engineered cues, or insoluble support matrices (carrier) such as mean particle diameter, swelling behavior, mechanical strength, and compression behavior are of supreme interest and importance for the performance of the immobilized systems. Immobilization of peroxidases into/onto insoluble support matrices is advantageous for practical applications due to convenience in handling, ease separation of enzymes from a reaction mixture and the reusability. A plethora of literature is available explaining individual immobilization system. However, current literature lacks the chemistry viewpoint of immobilization. This review work presents state-of-the-art "Smart" chemistry of immobilization and novel potentialities of several materials-based cues with different geometries including microspheres, hydrogels and polymeric membranes, nanoparticles, nanofibers, composite and hybrid or blended support materials. The involvement of various functional groups including amino, thiol, carboxylic, hydroxyl, and epoxy groups via "click" chemistry, amine chemistry, thiol chemistry, carboxyl chemistry, and epoxy chemistry over the protein surfaces is discussed.

Injectable synthetic hydrogel for bone regeneration: Physicochemical characterisation of a high and a low pH gelling system

Hybrid poly(ethylene glycol)-co-peptide hydrogels are a versatile platform for bone regeneration. For the use as injectable scaffolds, a good understanding of reaction kinetics and physical properties is vital. However, these factors have not yet been comprehensively illuminated. We show that gelation time can be effectively controlled by pH without affecting the elasticity of the formed hydrogels. Maleimide functionalised PEG gels at lower pH and produces more densely cross-linked networks than vinylsulfone functionalised PEG. Both form non-ideal networks. The elastic moduli on the order of a few kPa are in good agreement with the structural characterisation. Primary human osteoblasts cultured in proximity to bulk gels were not adversely affected in vitro. The results demonstrate that hybrid PEG-peptide hydrogels can be tailored to the requirements of in situ gelation. Attributed to their increased structural properties and a higher tolerance towards low pH, maleimide functionalised hydrogels might provide a better alternative for injectable applications.

Bioconjugation with Thiols by Benzylic Substitution

A benzylic substitution of 3-indolyl(hydroxyl)acetate derivatives with thiols proceeded specifically in the presence of amino, carboxy, and phosphate groups in weakly acidic aqueous solutions under nearly physiological condition, while no reaction occurred at pH over 7. Kinetic studies revealed that the reaction followed second-order kinetics (first-order in the reactant and first-order in thiol) in contrast with the S_N 1 mechanism of common benzylic substitution of alcohols. The utility of the present method for functionalization of biomacromolecules was demonstrated using several model proteins, such as lysozyme, insulin, trypsin, and serum albumin. The catalytic bioactivity of lysozyme in lysis of Micrococcus lysodeikticus cells was completely retained after the modification.

The impact of functional groups of poly(ethylene glycol) macromers on the physical properties of photo-polymerized hydrogels and the local inflammatory response in the host

Poly(ethylene glycol) (PEG) can be functionalized and modified with various moieties allowing for a multitude of cross-linking chemistries. Here, we investigate how vinyl sulfone, acrylate, and maleimide functional end groups affect hydrogel formation, physical properties, viability of encapsulated cells, post-polymerization modification, and inflammatory response of the host. We have shown that PEG-VS hydrogels, in the presence of a co-monomer, N-vinyl-2-pyrrolidone (NVP), form more efficiently than PEG-Ac and PEG-Mal hydrogels, resulting in superior physical properties after 6 min of ultraviolet light exposure. PEG-VS hydrogels exhibited hydrolytic stability and non-fouling characteristics, as well as the ability to be modified with biological motifs, such as RGD, after polymerization. Additionally, unmodified PEG-VS hydrogels resulted in lesser inflammatory response, cellular infiltration, and macrophage recruitment after implantation for 28 days in mice. These findings show that altering the end group chemistry of PEG macromer impacts characteristics of the photo-polymerized network. We have developed a tunable non-degradable PEG system that is conducive for cell or tissue encapsulation and evokes a minimal inflammatory response, which could be utilized for future immunoisolation applications.

STATEMENT OF SIGNIFICANCE

The objective of this study was to develop a tunable non-degradable PEG system that is conducive for encapsulation and evokes a minimal inflammatory response, which could be utilized for immunoisolation applications. This study has demonstrated that reactive functional groups of the PEG macromers impact free radical mediated network formation. Here, we show PEG-VS hydrogels meet the design criteria for an immunoisolating device as PEG-VS hydrogels form efficiently via photo-polymerization, impacting bulk properties, was stable in physiological conditions, and elicited a minimal inflammatory response. Further, NVP can be added to the precursor solution to expedite the cross-linking process without impacting cellular response upon encapsulation. These findings present an additional approach/chemistry to encapsulate cells or tissue for immunoisolation applications.

Poly(ethylene) glycol hydrogel based on oxa-Michael reaction: Precursor synthesis and hydrogel formation

This paper reported a facile strategy for the one-pot synthesis of vinyl sulfone (VS) group terminated hydrogel precursors [poly(ethylene) glycol (PEG)-VS] and PEG hydrogels via catalytic oxa-Michael reaction. Nine potential catalysts were investigated for the reaction between PEG and divinyl sulfone, among which 4-dimethylaminopyridine (DMAP) prevailed for its high catalytic activity. DMAP produced PEG-VS with a conversion of more than 90% in 2 h under a solvent-free condition at room temperature, which significantly simplifies the synthesis of PEG-VS. The preparation of PEG hydrogels was realized by adding glycerol as a crosslinker, and the physical and the mechanical properties were easily controlled by changing the crosslinker concentration as well as the PEG chain length. This strategy can also be applied to other polyhydroxy compounds as crosslinkers, and thus, a library of hydrogels with designed structures and desired properties could be prepared. The PEG hydrogels showed good antifouling properties, low cytotoxicity, and ability to release drugs at a tunable rate, indicating versatile potential bioapplications.

Characterization of Reactions between Water-Soluble Trialkylphosphines and Thiol Alkylating Reagents: Implications for Protein-Conjugation Reactions

Water-soluble trialkylphosphines such as tris(carboxyethyl)phosphine (TCEP) and trishydroxypropyl phosphine (THPP) are effective agents for reducing disulfide bonds in proteins and are increasingly becoming the reagents of choice for bioconjugation strategies that modify cysteine (thiol containing) amino acids. These reducing agents are often considered as being chemically compatible with Michael acceptors such as maleimides and, as such, are often not removed prior to performing protein conjugation reactions. Here, we demonstrate the rapid and irreversible reaction of both TCEP and THPP with derivatives of the commonly employed thiol alkylating groups, maleimide and vinyl sulfone. Mechanistic investigations revealed distinct differences between the reactions of TCEP and THPP with maleimide, leading to the production of either nonproductive ylenes or succidimidyl derivatives, respectively. Importantly, we also demonstrate the incorporation of nonproductive ylenes formed between maleimide and TCEP into the Pneumococcal capsular polysaccharide Pn6b following strategies employed toward the production of conjugate vaccines.

Synthesis and facile end-group quantification of functionalized PEG azides

Azido-functionalized poly(ethylene glycol) (PEG) derivatives are finding ever-increasing applications in the areas of conjugation chemistry and targeted drug delivery by their judicious incorporation into nanoparticle-forming polymeric systems. Quantification of azide incorporation into such PEG polymers is essential to their effective use. 1H Nuclear Magnetic Resonance (NMR) analysis offers the simplest approach; however, the relevant adjacent azide-bearing methylene protons are often obscured by the PEG manifold signals. This study describes the synthesis of 1,2,3-triazole adducts from their corresponding PEG azides via a convenient, mild click reaction, which facilitates straightforward NMR-based quantitative end-group analysis.This method was found to be compatible with many examples of bifunctional azido PEGs with molecular weights ranging from 2 to 18 kDa bearing a variety of functional groups. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 2888-2895.

Maghemite-human serum albumin hybrid nanoparticles: towards a theranostic system with high MRI r2* relaxivity

Human Serum Albumin (HSA) is the most abundant plasma protein in human blood, and therefore, it is the material of choice for the development of particulate formulations due to its biodegradable and biocompatible nature. Over the last decade, HSA nanoparticles (NPs) have been prepared mostly using desolvation techniques and evaluated as promising drug carriers. In addition, controlling the particle size has become a primary concern while formulating such nanoparticulate systems. Since many of these HSA-based carrier systems have often demonstrated batch-to-batch fabrication variability, significant efforts have been made to develop and characterize HSA-based NPs featuring a robust and controllable particle size, by using a desolvation/cross-linking-type Divinyl Sulfone (DVS)-mediated nanofabrication method. For this purpose and for global multi-parameter fabrication process optimization, a statistically significant Design of Experiment (DoE, MINITAB® 17 DoE software) methodology has been successfully implemented. It aimed to disclose an optimal set of HSA NP fabrication conditions in order to afford highly reproducible and stable 23.05 ± 5.3 nm-sized DoE-globally optimized core HSA NPs. Due to the use of bifunctional DVS as a cross-linker for the preparation of such DoE-optimized HSA NPs, their surface contains a variety of free functional groups which are available for further second step functional modifications. Moreover, related hybrid organic/inorganic nanosystems consisting of DoE-optimized HSA NPs that encapsulated hydrophilic (NH₄)₂Ce(IV)(NO₃)₆ (Ceric Ammonium Nitrate - CAN) modified γ-Fe₂O₃ NPs (CAN-maghemite or CAN-γ-Fe₂O₃ NPs), which enable medical imaging using magnetic resonance imaging (MRI), have also been fabricated and characterized. The resulting hybrid magnetic NPs are a quite powerful T₂* contrast agent (r₂* of 482 mM^-1 s^-1), which may be used as a powerful dual phase platform for both therapeutic (drug delivery) and diagnostic imaging (MRI) applications.

Fibroblast growth factor 2 dimer with superagonist in vitro activity improves granulation tissue formation during wound healing

Site-specific chemical dimerization of fibroblast growth factor 2 (FGF2) with the optimal linker length resulted in a FGF2 homodimer with improved granulation tissue formation and blood vessel formation at exceptionally low concentrations. Homodimers of FGF2 were synthesized through site-specific linkages to both ends of different molecular weight poly(ethylene glycols) (PEGs). The optimal linker length was determined by screening dimer-induced metabolic activity of human dermal fibroblasts and found to be that closest to the inter-cysteine distance, 70 Å, corresponding to 2 kDa PEG. A straightforward analysis of the kinetics of second ligand binding as a function of tether length showed that, as the polymerization index (the number of monomer repeat units in the polymer, N) of the tether decreases, the mean time for second ligand capture decreases as ∼N(3/2), leading to an enhancement of the number of doubly bound ligands in steady-state for a given (tethered) ligand concentration. FGF2-PEG2k-FGF2 induced greater fibroblast metabolic activity than FGF2 alone, all other dimers, and all monoconjugates, at each concentration tested, with the greatest difference observed at low (0.1 ng/mL) concentration. FGF2-PEG2k-FGF2 further exhibited superior activity compared to FGF2 for both metabolic activity and migration in human umbilical vein endothelial cells, as well as improved angiogenesis in a coculture model in vitro. Efficacy in an in vivo wound healing model was assessed in diabetic mice. FGF2-PEG2k-FGF2 increased granulation tissue and blood vessel density in the wound bed compared to FGF2. The results suggest that this rationally designed construct may be useful for improving the fibroblast matrix formation and angiogenesis in chronic wound healing.

Characterization of the crosslinking kinetics of multi-arm poly(ethylene glycol) hydrogels formed via Michael-type addition

Tunable properties of multi-arm poly(ethylene glycol) (PEG) hydrogel, crosslinked by Michael-type addition, support diverse applications in tissue engineering. Bioactive modification of PEG is achieved by incorporating integrin binding sequences, like RGD, and crosslinking with tri-functional protease sensitive crosslinking peptide (GCYKNRGCYKNRCG), which compete for the same reactive groups in PEG. This competition leads to a narrow range of conditions that support sufficient crosslinking density to provide structural control. Kinetics of hydrogel formation plays an important role in defining the conditions to form hydrogels with desired mechanical and biological properties, which have not been fully characterized. In this study, we explored how increasing PEG functionality from 4 to 8-arms and the concentration of biological moieties, ranging from 0.5 mM to 3.75 mM, affected the kinetics of hydrogel formation, storage modulus, and swelling after the hydrogels were allowed to form for 15 or 60 minutes. Next, human bone marrow stromal cells were encapsulated and cultured in these modified hydrogels to investigate the combined effect of mechano-biological properties on phenotypes of encapsulated cells. While the molar concentration of the reactive functional groups (-vinyl sulfone) was identical in the conditions comparing 4 and 8-arm PEG, the 8-arm PEG formed faster, allowed a greater degree of modification, and was superior in three-dimensional culture. The degrees of swelling and storage modulus of 8-arm PEG were less affected by the modification compared to 4-arm PEG. These findings suggest that 8-arm PEG allows a more precise control of mechanical properties that could lead to a larger spectrum of tissue engineering applications.

Chromatography-free synthesis of monodisperse oligo(ethylene glycol) mono-p-toluenesulfonates and quantitative analysis of oligomer purity

Oligo(ethylene glycol) monotosylates are prepared on a multigram scale and in high purity with a new chromatography-free process.

Polymerization of Ethylene Oxide, Propylene Oxide, and Other Alkylene Oxides: Synthesis, Novel Polymer Architectures, and Bioconjugation

The review summarizes current trends and developments in the polymerization of alkylene oxides in the last two decades since 1995, with a particular focus on the most important epoxide monomers ethylene oxide (EO), propylene oxide (PO), and butylene oxide (BO). Classical synthetic pathways, i.e., anionic polymerization, coordination polymerization, and cationic polymerization of epoxides (oxiranes), are briefly reviewed. The main focus of the review lies on more recent and in some cases metal-free methods for epoxide polymerization, i.e., the activated monomer strategy, the use of organocatalysts, such as N-heterocyclic carbenes (NHCs) and N-heterocyclic olefins (NHOs) as well as phosphazene bases. In addition, the commercially relevant double-metal cyanide (DMC) catalyst systems are discussed. Besides the synthetic progress, new types of multifunctional linear PEG (mf-PEG) and PPO structures accessible by copolymerization of EO or PO with functional epoxide comonomers are presented as well as complex branched, hyperbranched, and dendrimer like polyethers. Amphiphilic block copolymers based on PEO and PPO (Poloxamers and Pluronics) and advances in the area of PEGylation as the most important bioconjugation strategy are also summarized. With the ever growing toolbox for epoxide polymerization, a "polyether universe" may be envisaged that in its structural diversity parallels the immense variety of structural options available for polymers based on vinyl monomers with a purely carbon-based backbone.

Developments and recent advancements in the field of endogenous amino acid selective bond forming reactions for bioconjugation

Bioconjugation methodologies have proven to play a central enabling role in the recent development of biotherapeutics and chemical biology approaches. Recent endeavours in these fields shed light on unprecedented chemical challenges to attain bioselectivity, biocompatibility, and biostability required by modern applications. In this review the current developments in various techniques of selective bond forming reactions of proteins and peptides were highlighted. The utility of each endogenous amino acid-selective conjugation methodology in the fields of biology and protein science has been surveyed with emphasis on the most relevant among reported transformations; selectivity and practical use have been discussed.

Reactivity and kinetics of vinyl sulfone-functionalized self-assembled monolayers for bioactive ligand immobilization

A new vinyl sulfone (VS) disulfide, 1,2-bis(11-(vinyl sulfonyl)undecyl)disulfane, was synthesized to enable the preparation of VS-presenting self-assembled monolayers (VS SAMs) on Au substrates. The VS SAMs were used as a model system to assess the reaction kinetics of bioactive ligands, i.e., glutathione (GSH), N-(5-amino-1-carboxypentyl)iminodiacetic acid (ab-NTA), and mannose, toward the VS groups on the SAM surface. The VS SAMs and the ligand immobilization were characterized by X-ray photoelectron spectroscopy (XPS), contact angle goniometry, and protein-binding experiments using a quartz crystal microbalance (QCM). Kinetic studies showed that the surface VS groups undergo pseudo-first-order reactions with various ligands, with the observed rate constant being 0.057 min(-1) for GSH at pH 7.5, 0.011 min(-1) for ab-NTA at pH 8.5, and 0.009 min(-1) for mannose at pH 10.5. This work advanced our understanding of the reactivity of VS-bearing functional surfaces and further demonstrated the versatile potential of VS chemistry to prepare ligand-immobilized bioactive surfaces.

Mimicking biological phenomena in hydrogel-based biomaterials to promote dynamic cellular responses

Novel methods to endow cell-responsiveness into hydrogels are explored and successful work is summarized.

Bioengineered Scaffolds for 3D Analysis of Glioblastoma Proliferation and Invasion

The invasion of malignant glioblastoma (GBM) cells into healthy brain is a primary cause of tumor recurrence and associated morbidity. Here, we describe a high-throughput method for quantitative measurement of GBM proliferation and invasion in three-dimensional (3D) culture. Optically clear hydrogels composed of thiolated hyaluronic acid and gelatin were chemically crosslinked with thiol-reactive poly(ethylene glycol) polymers to form an artificial 3D tumor microenvironment. Characterization of the viscoelasticity and aqueous stability indicated the hydrogels were mechanically tunable with stiffness ranging from 18 Pa to 18.2 kPa and were resistant to hydrolysis for at least 30 days. The proliferation, dissemination and subsequent invasion of U118 and U87R GBM spheroids cultured on the hydrogels were tracked in situ with repeated fluorescence confocal microscopy. Using custom automated image processing, cells were identified and quantified through 500 µm of gel over 14 days. Proliferative and invasive behaviors were observed to be contingent on cell type, gel stiffness, and hepatocyte growth factor availability. These measurements highlight the utility of this platform for performing quantitative, fluorescence imaging analysis of the behavior of malignant cells within an artificial, 3D tumor microenvironment.

Therapeutic protein-polymer conjugates: advancing beyond PEGylation

Protein-polymer conjugates are widely used as therapeutics. All Food and Drug Administration (FDA)-approved protein conjugates are covalently linked to poly(ethylene glycol) (PEG). These PEGylated drugs have longer half-lives in the bloodstream, leading to less frequent dosing, which is a significant advantage for patients. However, there are some potential drawbacks to PEG that are driving the development of alternatives. Polymers that display enhanced pharmacokinetic properties along with additional advantages such as improved stability or degradability will be important to advance the field of protein therapeutics. This perspective presents a summary of protein-PEG conjugates for therapeutic use and alternative technologies in various stages of development as well as suggestions for future directions. Established methods of producing protein-PEG conjugates and new approaches utilizing controlled radical polymerization are also covered.

Protein-polymer conjugation via ligand affinity and photoactivation of glutathione S-transferase

A photoactivated, site-selective conjugation of poly(ethylene glycol) (PEG) to the glutathione (GSH) binding pocket of glutathione S-transferase (GST) is described. To achieve this, a GSH analogue (GSH-BP) was designed and chemically synthesized with three functionalities: (1) the binding affinity of GSH to GST, (2) a free thiol for polymer functionalization, and (3) a photoreactive benzophenone (BP) component. Different molecular weights (2 kDa, 5 kDa, and 20 kDa) of GSH-BP modified PEGs (GSBP-PEGs) were synthesized and showed conjugation efficiencies between 52% and 76% to GST. Diazirine (DA) PEG were also prepared but gave conjugation yields lower than for GSBP-PEGs. PEGs with different end-groups were also synthesized to validate the importance of each component in the end-group design. End-groups included glutathione (GS-PEG) and benzophenone (BP-PEG). Results showed that both GSH and BP were crucial for successful conjugation to GST. In addition, conjugations of 5 kDa GSBP-PEG to different proteins were investigated, including bovine serum albumin (BSA), lysozyme (Lyz), ubiquitin (Ubq), and GST-fused ubiquitin (GST-Ubq) to ensure specific binding to GST. By combining noncovalent and covalent interactions, we have developed a new phototriggered protein–polymer conjugation method that is generally applicable to GST-fusion proteins.

Inorganic materials as supports for covalent enzyme immobilization: methods and mechanisms

Several inorganic materials are potentially suitable for enzymatic covalent immobilization, by means of several different techniques. Such materials must meet stringent criteria to be suitable as solid matrices: complete insolubility in water, reasonable mechanical strength and chemical resistance under the operational conditions, the capability to form manageable particles with high surface area, reactivity towards derivatizing/functionalizing agents. Non-specific protein adsorption should be always considered when planning covalent immobilization on inorganic solids. A huge mass of experimental work has shown that silica, silicates, borosilicates and aluminosilicates, alumina, titania, and other oxides, are the materials of choice when attempting enzyme immobilizations on inorganic supports. More recently, some forms of elemental carbon, silicon, and certain metals have been also proposed for certain applications. With regard to the derivatization/functionalization techniques, the use of organosilanes through silanization is undoubtedly the most studied and the most applied, although inorganic bridge formation and acylation with selected acyl halides have been deeply studied. In the present article, the most common inorganic supports for covalent immobilization of the enzymes are reviewed, with particular focus on their advantages and disadvantages in terms of enzyme loadings, operational stability, undesired adsorption, and costs. Mechanisms and methods for covalent immobilization are also discussed, focusing on the most widespread activating approaches (such as glutaraldehyde, cyanogen bromide, divinylsulfone, carbodiimides, carbonyldiimidazole, sulfonyl chlorides, chlorocarbonates, N-hydroxysuccinimides).

A new reagent for stable thiol-specific conjugation

Many clinically used protein therapeutics are modified to increase their efficacy. Example modifications include the conjugation of cytotoxic drugs to monoclonal antibodies or poly(ethylene glycol) (PEG) to proteins and peptides. Monothiol-specific conjugation can be efficient and is often accomplished using maleimide-based reagents. However, maleimide derived conjugates are known to be susceptible to exchange reactions with endogenous proteins. To address this limitation in stability, we have developed PEG-mono-sulfone 3, which is a latently reactive, monothiol selective conjugation reagent. Comparative reactions with PEG-maleimide and other common thiol-selective PEGylation reagents including vinyl sulfone, acrylate, and halo-acetamides show that PEG-mono-sulfone 3 undergoes more efficient conjugation under mild reaction conditions. Due to the latent reactivity of PEG-mono-sulfone 3, its reactivity can be tailored and, once conjugated, the electron-withdrawing ketone is easily reduced under mild conditions to prevent undesirable deconjugation and exchange reactions from occurring. We describe a comparative stability study demonstrating a PEG-maleimide conjugate to be more labile to deconjugation than the corresponding conjugate obtained using PEG-mono-sulfone 3.