Mass spectral kinetic study of acylation and deacylation during the hydrolysis of penicillins and cefotaxime by beta-lactamase TEM-1 and the G238S mutant

Friends and relatives: insight into conformational regulation from orthologues and evolutionary lineages using KIF and KIN

Noncovalent interaction networks provide a powerful means to represent and analyze protein structure. Such networks can represent both static structures and dynamic conformational ensembles. We have recently developed two tools for analyzing such interaction networks and generating hypotheses for protein engineering. Here, we apply these tools to the conformational regulation of substrate specificity in class A β-lactamases, particularly the evolutionary development from generalist to specialist catalytic function and how that can be recapitulated or reversed by protein engineering. These tools, KIF and KIN, generate a set of prioritized residues and interactions as targets for experimental protein engineering.

Natural and Synthetic Suppressor Mutations Defy Stability-Activity Tradeoffs

Thermodynamic stability represents one important constraint on protein evolution, but the molecular basis for how mutations that change stability impact fitness remains unclear. Here, we demonstrate that a prevalent global suppressor mutation in TEM β-lactamase, M182T, increases fitness by reducing proteolysis in vivo. We also show that a synthetic mutation, M182S, can act as a global suppressor and suggest that its absence from natural populations is due to genetic inaccessibility rather than fundamental differences in the protein's stability or activity.

The Interplay of Electrostatics and Chemical Positioning in the Evolution of Antibiotic Resistance in TEM β-Lactamases

The interplay of enzyme active site electrostatics and chemical positioning is important for understanding the origin(s) of enzyme catalysis and the design of novel catalysts. We reconstruct the evolutionary trajectory of TEM-1 β-lactamase to TEM-52 toward extended-spectrum activity to better understand the emergence of antibiotic resistance and to provide insights into the structure-function paradigm and noncovalent interactions involved in catalysis. Utilizing a detailed kinetic analysis and the vibrational Stark effect, we quantify the changes in rates and electric fields in the Michaelis and acyl-enzyme complexes for penicillin G and cefotaxime to ascertain the evolutionary role of electric fields to modulate function. These data are combined with MD simulations to interpret and quantify the substrate-dependent structural changes during evolution. We observe that this evolutionary trajectory utilizes a large preorganized electric field and substrate-dependent chemical positioning to facilitate catalysis. This governs the evolvability, substrate promiscuity, and protein fitness landscape in TEM β-lactamase antibiotic resistance.

Opening of a cryptic pocket in β-lactamase increases penicillinase activity

A protein is a shape-shifter, but it is currently unclear which of the many structures a protein can adopt are relevant for its function. Here, we examine conformations that contain a “cryptic” pocket (i.e., a pocket absent in ligand-free structures). Cryptic pockets have potential utility in drug discovery efforts because they provide a means to target “undruggable” proteins (i.e., proteins lacking known pockets) or enhance rather than inhibit protein function. In this study, we use a combination of thiol-labeling and kinetic assays, NMR, and molecular dynamic simulations to identify the function of the Ω-loop cryptic pocket in β-lactamase enzymes. We find that an open pocket population is beneficial for hydrolysis of the substrate benzylpenicillin.

Understanding the functional role of protein-excited states has important implications in protein design and drug discovery. However, because these states are difficult to find and study, it is still unclear if excited states simply result from thermal fluctuations and generally detract from function or if these states can actually enhance protein function. To investigate this question, we consider excited states in β-lactamases and particularly a subset of states containing a cryptic pocket which forms under the Ω-loop. Given the known importance of the Ω-loop and the presence of this pocket in at least two homologs, we hypothesized that these excited states enhance enzyme activity. Using thiol-labeling assays to probe Ω-loop pocket dynamics and kinetic assays to probe activity, we find that while this pocket is not completely conserved across β-lactamase homologs, those with the Ω-loop pocket have a higher activity against the substrate benzylpenicillin. We also find that this is true for TEM β-lactamase variants with greater open Ω-loop pocket populations. We further investigate the open population using a combination of NMR chemical exchange saturation transfer experiments and molecular dynamics simulations. To test our understanding of the Ω-loop pocket’s functional role, we designed mutations to enhance/suppress pocket opening and observed that benzylpenicillin activity is proportional to the probability of pocket opening in our designed variants. The work described here suggests that excited states containing cryptic pockets can be advantageous for function and may be favored by natural selection, increasing the potential utility of such cryptic pockets as drug targets.

β-Lactam antibiotic targets and resistance mechanisms: from covalent inhibitors to substrates

The β-lactams are the most widely used antibacterial agents worldwide. These antibiotics, a group that includes the penicillins and cephalosporins, are covalent inhibitors that target bacterial penicillin-binding proteins and disrupt peptidoglycan synthesis. Bacteria can achieve resistance to β-lactams in several ways, including the production of serine β-lactamase enzymes. While β-lactams also covalently interact with serine β-lactamases, these enzymes are capable of deacylating this complex, treating the antibiotic as a substrate. In this tutorial-style review, we provide an overview of the β-lactam antibiotics, focusing on their covalent interactions with their target proteins and resistance mechanisms. We begin by describing the structurally diverse range of β-lactam antibiotics and β-lactamase inhibitors that are currently used as therapeutics. Then, we introduce the penicillin-binding proteins, describing their functions and structures, and highlighting their interactions with β-lactam antibiotics. We next describe the classes of serine β-lactamases, exploring some of the mechanisms by which they achieve the ability to degrade β-lactams. Finally, we introduce the l,d-transpeptidases, a group of bacterial enzymes involved in peptidoglycan synthesis which are also targeted by β-lactam antibiotics. Although resistance mechanisms are now prevalent for all antibiotics in this class, past successes in antibiotic development have at least delayed this onset of resistance. The β-lactams continue to be an essential tool for the treatment of infectious disease, and recent advances (e.g., β-lactamase inhibitor development) will continue to support their future use.

Known Evolutionary Paths Are Accessible to Engineered ß-Lactamases Having Altered Protein Motions at the Timescale of Catalytic Turnover

The evolution of new protein functions is dependent upon inherent biophysical features of proteins. Whereas, it has been shown that changes in protein dynamics can occur in the course of directed molecular evolution trajectories and contribute to new function, it is not known whether varying protein dynamics modify the course of evolution. We investigate this question using three related ß-lactamases displaying dynamics that differ broadly at the slow timescale that corresponds to catalytic turnover yet have similar fast dynamics, thermal stability, catalytic, and substrate recognition profiles. Introduction of substitutions E104K and G238S, that are known to have a synergistic effect on function in the parent ß-lactamase, showed similar increases in catalytic efficiency toward cefotaxime in the related ß-lactamases. Molecular simulations using Protein Energy Landscape Exploration reveal that this results from stabilizing the catalytically-productive conformations, demonstrating the dominance of the synergistic effect of the E014K and G238S substitutions in vitro in contexts that vary in terms of sequence and dynamics. Furthermore, three rounds of directed molecular evolution demonstrated that known cefotaximase-enhancing mutations were accessible regardless of the differences in dynamics. Interestingly, specific sequence differences between the related ß-lactamases were shown to have a higher effect in evolutionary outcomes than did differences in dynamics. Overall, these ß-lactamase models show tolerance to protein dynamics at the timescale of catalytic turnover in the evolution of a new function.

Predicting allostery and microbial drug resistance with molecular simulations

Beta-lactamase enzymes mediate the most common forms of gram-negative antibiotic resistance affecting clinical treatment. They also constitute an excellent model system for the difficult problem of understanding how allosteric mutations can augment catalytic activity of already-competent enzymes. Multiple allosteric mutations have been identified that alter catalytic activity or drug-resistance spectrum in class A beta lactamases, but predicting these in advance continues to be challenging. Here, we review computational techniques based on structure and/or molecular simulation to predict such mutations. Structure-based techniques have been particularly helpful in developing graph algorithms for analyzing critical residues in beta-lactamase function, while classical molecular simulation has recently shown the ability to prospectively predict allosteric mutations increasing beta-lactamase activity and drug resistance. These will ultimately achieve the greatest power when combined with simulation methods that model reactive chemistry to calculate activation free energies directly.

Mapping Conformational Dynamics to Individual Steps in the TEM-1 β-Lactamase Catalytic Mechanism

Conformational dynamics are increasingly recognized as being essential for enzyme function. However, there is virtually no direct experimental evidence to support the notion that individual dynamic modes are required for specific catalytic processes, apart from the initial step of substrate binding. In this work, we use a unique approach based on millisecond hydrogen-deuterium exchange mass spectrometry to identify dynamic modes linked to individual catalytic processes in the antibiotic resistance enzyme TEM-1 β-lactamase. Using a "good" substrate (ampicillin), a poorly hydrolyzed substrate (cephalexin) and a covalent inhibitor (clavulanate), we are able to isolate dynamic modes that are specifically linked to substrate binding, productive lactam ring hydrolysis and deacylation. These discoveries are ultimately translated into specific targets for allosteric TEM-1 inhibitor development.

Structural and Mechanistic Basis for Extended-Spectrum Drug-Resistance Mutations in Altering the Specificity of TEM, CTX-M, and KPC β-lactamases

The most common mechanism of resistance to β-lactam antibiotics in Gram-negative bacteria is the production of β-lactamases that hydrolyze the drugs. Class A β-lactamases are serine active-site hydrolases that include the common TEM, CTX-M, and KPC enzymes. The TEM enzymes readily hydrolyze penicillins and older cephalosporins. Oxyimino-cephalosporins, such as cefotaxime and ceftazidime, however, are poor substrates for TEM-1 and were introduced, in part, to circumvent β-lactamase-mediated resistance. Nevertheless, the use of these antibiotics has lead to evolution of numerous variants of TEM with mutations that significantly increase the hydrolysis of the newer cephalosporins. The CTX-M enzymes emerged in the late 1980s and hydrolyze penicillins and older cephalosporins and derive their name from the ability to also hydrolyze cefotaxime. The CTX-M enzymes, however, do not efficiently hydrolyze ceftazidime. Variants of CTX-M enzymes, however, have evolved that exhibit increased hydrolysis of ceftazidime. Finally, the KPC enzyme emerged in the 1990s and is characterized by its broad specificity that includes penicillins, most cephalosporins, and carbapenems. The KPC enzyme, however, does not efficiently hydrolyze ceftazidime. As with the TEM and CTX-M enzymes, variants have recently evolved that extend the spectrum of KPC β-lactamase to include ceftazidime. This review discusses the structural and mechanistic basis for the expanded substrate specificity of each of these enzymes that result from natural mutations that confer oxyimino-cephalosporin resistance. For the TEM enzyme, extended-spectrum mutations act by establishing new interactions with the cephalosporin. These mutations increase the conformational heterogeneity of the active site to create sub-states that better accommodate the larger drugs. The mutations expanding the spectrum of CTX-M enzymes also affect the flexibility and conformation of the active site to accommodate ceftazidime. Although structural data are limited, extended-spectrum mutations in KPC may act by mediating new, direct interactions with substrate and/or altering conformations of the active site. In many cases, mutations that expand the substrate profile of these enzymes simultaneously decrease the thermodynamic stability. This leads to the emergence of additional global suppressor mutations that help correct the stability defects leading to increased protein expression and increased antibiotic resistance.

Predicting allosteric mutants that increase activity of a major antibiotic resistance enzyme

Allosteric mutations increasing k_cat in a beta lactamase act by changing conformational ensembles of active-site residues identified by machine learning.

The CTX-M family of beta lactamases mediate broad-spectrum antibiotic resistance and are present in the majority of drug-resistant Gram-negative bacterial infections worldwide. Allosteric mutations that increase catalytic rates of these drug resistance enzymes have been identified in clinical isolates but are challenging to predict prospectively. We have used molecular dynamics simulations to predict allosteric mutants increasing CTX-M9 drug resistance, experimentally testing top mutants using multiple antibiotics. Purified enzymes show an increase in catalytic rate and efficiency, while mutant crystal structures show no detectable changes from wild-type CTX-M9. We hypothesize that increased drug resistance results from changes in the conformational ensemble of an acyl intermediate in hydrolysis. Machine-learning analyses on the three top mutants identify changes to the binding-pocket conformational ensemble by which these allosteric mutations transmit their effect. These findings show how molecular simulation can predict how allosteric mutations alter active-site conformational equilibria to increase catalytic rates and thus resistance against common clinically used antibiotics.

Modelling proteins' hidden conformations to predict antibiotic resistance

TEM β-lactamase confers bacteria with resistance to many antibiotics and rapidly evolves activity against new drugs. However, functional changes are not easily explained by differences in crystal structures. We employ Markov state models to identify hidden conformations and explore their role in determining TEM's specificity. We integrate these models with existing drug-design tools to create a new technique, called Boltzmann docking, which better predicts TEM specificity by accounting for conformational heterogeneity. Using our MSMs, we identify hidden states whose populations correlate with activity against cefotaxime. To experimentally detect our predicted hidden states, we use rapid mass spectrometric footprinting and confirm our models' prediction that increased cefotaxime activity correlates with reduced Ω-loop flexibility. Finally, we design novel variants to stabilize the hidden cefotaximase states, and find their populations predict activity against cefotaxime in vitro and in vivo. Therefore, we expect this framework to have numerous applications in drug and protein design.

Enzyme dynamics and engineering: one step at a time

Although protein dynamics are accepted as being essential for enzyme function, their effects are not fully understood. In this issue of Chemistry and Biology, Gobeil and coworkers describe how engineered changes in the millisecond motions of a mutant TEM-1 β-lactamase do not significantly affect substrate turnover. This mutational robustness has implications for protein engineering and design strategies.

Exploring the potential impact of an expanded genetic code on protein function

With few exceptions, all living organisms encode the same 20 canonical amino acids; however, it remains an open question whether organisms with additional amino acids beyond the common 20 might have an evolutionary advantage. Here, we begin to test that notion by making a large library of mutant enzymes in which 10 structurally distinct noncanonical amino acids were substituted at single sites randomly throughout TEM-1 β-lactamase. A screen for growth on the β-lactam antibiotic cephalexin afforded a unique p-acrylamido-phenylalanine (AcrF) mutation at Val-216 that leads to an increase in catalytic efficiency by increasing kcat, but not significantly affecting KM. To understand the structural basis for this enhanced activity, we solved the X-ray crystal structures of the ligand-free mutant enzyme and of the deacylation-defective wild-type and mutant cephalexin acyl-enzyme intermediates. These structures show that the Val-216-AcrF mutation leads to conformational changes in key active site residues-both in the free enzyme and upon formation of the acyl-enzyme intermediate-that lower the free energy of activation of the substrate transacylation reaction. The functional changes induced by this mutation could not be reproduced by substitution of any of the 20 canonical amino acids for Val-216, indicating that an expanded genetic code may offer novel solutions to proteins as they evolve new activities.

Maintenance of native-like protein dynamics may not be required for engineering functional proteins

Proteins are dynamic systems, and understanding dynamics is critical for fully understanding protein function. Therefore, the question of whether laboratory engineering has an impact on protein dynamics is of general interest. Here, we demonstrate that two homologous, naturally evolved enzymes with high degrees of structural and functional conservation also exhibit conserved dynamics. Their similar set of slow timescale dynamics is highly restricted, consistent with evolutionary conservation of a functionally important feature. However, we also show that dynamics of a laboratory-engineered chimeric enzyme obtained by recombination of the two homologs exhibits striking difference on the millisecond timescale, despite function and high-resolution crystal structure (1.05 Å) being conserved. The laboratory-engineered chimera is thus functionally tolerant to modified dynamics on the timescale of catalytic turnover. Tolerance to dynamic variation implies that maintenance of native-like protein dynamics may not be required when engineering functional proteins.

Structural origins of oxacillinase specificity in class D β-lactamases

Since the discovery and use of penicillin, the increase of antibiotic resistance among bacterial pathogens has become a major health concern. The most prevalent resistance mechanism in Gram-negative bacteria is due to β-lactamase expression. Class D β-lactamases are of particular importance due to their presence in multidrug-resistant Acinetobacter baumannii and Pseudomonas aeruginosa. The class D enzymes were initially characterized by their ability to efficiently hydrolyze isoxazolyl-type β-lactams like oxacillin. Due to this substrate preference, these enzymes are traditionally referred to as oxacillinases or OXAs. However, this class is comprised of subfamilies characterized by diverse activities that include oxacillinase, carbapenemase, or cephalosporinase substrate specificity. OXA-1 represents one subtype of class D enzyme that efficiently hydrolyzes oxacillin, and OXA-24/40 represents another with weak oxacillinase, but increased carbapenemase, activity. To examine the structural basis for the substrate selectivity differences between OXA-1 and OXA-24/40, the X-ray crystal structures of deacylation-deficient mutants of these enzymes (Lys70Asp for OXA-1; Lys84Asp for OXA-24) in complexes with oxacillin were determined to 1.4 Å and 2.4 Å, respectively. In the OXA-24/40/oxacillin structure, the hydrophobic R1 side chain of oxacillin disrupts the bridge between Tyr112 and Met223 present in the apo OXA-24/40 structure, causing the main chain of the Met223-containing loop to adopt a completely different conformation. In contrast, in the OXA-1/oxacillin structure, a hydrophobic pocket consisting of Trp102, Met99, Phe217, Leu161, and Leu255 nicely complements oxacillin's nonpolar R1 side chain. Comparison of the OXA-1/oxacillin and OXA-24/40/oxacillin complexes provides novel insight on how substrate selectivity is achieved among subtypes of class D β-lactamases. By elucidating important active site interactions, these findings can also inform the design of novel antibiotics and inhibitors.

Structure of an engineered β-lactamase maltose binding protein fusion protein: insights into heterotropic allosteric regulation

Engineering novel allostery into existing proteins is a challenging endeavor to obtain novel sensors, therapeutic proteins, or modulate metabolic and cellular processes. The RG13 protein achieves such allostery by inserting a circularly permuted TEM-1 β-lactamase gene into the maltose binding protein (MBP). RG13 is positively regulated by maltose yet is, serendipitously, inhibited by Zn²⁺ at low µM concentration. To probe the structure and allostery of RG13, we crystallized RG13 in the presence of mM Zn²⁺ concentration and determined its structure. The structure reveals that the MBP and TEM-1 domains are in close proximity connected via two linkers and a zinc ion bridging both domains. By bridging both TEM-1 and MBP, Zn²⁺ acts to “twist tie” the linkers thereby partially dislodging a linker between the two domains from its original catalytically productive position in TEM-1. This linker 1 contains residues normally part of the TEM-1 active site including the critical β3 and β4 strands important for activity. Mutagenesis of residues comprising the crystallographically observed Zn²⁺ site only slightly affected Zn²⁺ inhibition 2- to 4-fold. Combined with previous mutagenesis results we therefore hypothesize the presence of two or more inter-domain mutually exclusive inhibitory Zn²⁺ sites. Mutagenesis and molecular modeling of an intact TEM-1 domain near MBP within the RG13 framework indicated a close surface proximity of the two domains with maltose switching being critically dependent on MBP linker anchoring residues and linker length. Structural analysis indicated that the linker attachment sites on MBP are at a site that, upon maltose binding, harbors both the largest local Cα distance changes and displays surface curvature changes, from concave to relatively flat becoming thus less sterically intrusive. Maltose activation and zinc inhibition of RG13 are hypothesized to have opposite effects on productive relaxation of the TEM-1 β3 linker region via steric and/or linker juxtapositioning mechanisms.

The evolution of cefotaximase activity in the TEM β-lactamase

The development of a molecular-level understanding of drug resistance through β-lactamase is critical not only in designing newer-generation antibacterial agents but also in providing insight into the evolutionary mechanisms of enzymes in general. In the present study, we have evaluated the effect of four drug resistance mutations (A42G, E104K, G238S, and M182T) on the cefotaximase activity of the TEM-1 β-lactamase. Using computational methods, including docking and molecular mechanics calculations, we have been able to correctly identify the relative order of catalytic activities associated with these four single point mutants. Further analyses suggest that the changes in catalytic efficiency for mutant enzymes are correlated to structural changes within the binding site. Based on the energetic and structural analyses of the wild-type and mutant enzymes, structural rearrangement is suggested as a mechanism of evolution of drug resistance through TEM β-lactamase. The present study not only provides molecular-level insight into the effect of four drug resistance mutations on the structure and function of the TEM β-lactamase but also establishes a foundation for a future molecular-level analysis of complete evolutionary trajectory for this class of enzymes.

Natural evolution of TEM-1 β-lactamase: experimental reconstruction and clinical relevance

TEM-1 β-lactamase is one of the most well-known antibiotic resistance determinants around. It confers resistance to penicillins and early cephalosporins and has shown an astonishing functional plasticity in response to the introduction of novel drugs derived from these antibiotics. Since its discovery in the 1960s, over 170 variants of TEM-1 - with different amino acid sequences and often resistance phenotypes - have been isolated in hospitals and clinics worldwide. Next to this well-documented 'natural' evolution, the in vitro evolution of TEM-1 has been the focus of attention of many experimental studies. In this review, we compare the natural and laboratory evolution of TEM-1 in order to address the question to what extent the evolution of antibiotic resistance can be repeated, and hence might have been predicted, under laboratory conditions. We also use the comparison to gain an insight into the adaptive relevance of hitherto uncharacterized substitutions present in clinical isolates and to predict substitutions not yet observed in nature. Based on new structural insights, we review what is known about substitutions in TEM-1 that contribute to the extension of its resistance phenotype. Finally, we address the clinical relevance of TEM alleles during the past decade, which has been dominated by the emergence of another β-lactamase, CTX-M.

High tolerance to simultaneous active-site mutations in TEM-1 beta-lactamase: Distinct mutational paths provide more generalized beta-lactam recognition

The diversity in substrate recognition spectra exhibited by various beta-lactamases can result from one or a few mutations in the active-site area. Using Escherichia coli TEM-1 beta-lactamase as a template that efficiently hydrolyses penicillins, we performed site-saturation mutagenesis simultaneously on two opposite faces of the active-site cavity. Residues 104 and 105 as well as 238, 240, and 244 were targeted to verify their combinatorial effects on substrate specificity and enzyme activity and to probe for cooperativity between these residues. Selection for hydrolysis of an extended-spectrum cephalosporin, cefotaxime (CTX), led to the identification of a variety of novel mutational combinations. In vivo survival assays and in vitro characterization demonstrated a general tendency toward increased CTX and decreased penicillin resistance. Although selection was undertaken with CTX, productive binding (K(M)) was improved for all substrates tested, including benzylpenicillin for which catalytic turnover (k(cat)) was reduced. This indicates broadened substrate specificity, resulting in more generalized (or less specialized) variants. In most variants, the G238S mutation largely accounted for the observed properties, with additional mutations acting in an additive fashion to enhance these properties. However, the most efficient variant did not harbor the mutation G238S but combined two neighboring mutations that acted synergistically, also providing a catalytic generalization. Our exploration of concurrent mutations illustrates the high tolerance of the TEM-1 active site to multiple simultaneous mutations and reveals two distinct mutational paths to substrate spectrum diversification.

Time-Resolved Micro Liquid Desorption Mass Spectrometry: Mechanism, Features, and Kinetic Applications

Liquid water beam desorption mass spectrometry is an intriguing technique to isolate charged molecular aggregates directly from the liquid phase and to analyze them employing sensitive mass spectrometry. The liquid phase in this approach consists of a 10 µm diameter free liquid filament in vacuum which is irradiated by a focussed infrared laser pulse resonant with the OH-stretch vibration of bulk water. Depending upon the laser wavelength, charged (e.g. protonated) macromolecules are isolated from solution through a still poorly characterized mechanism. After the gentle liquid-to-vacuum transfer the low-charge-state aggregates are analyzed using time-of-flight mass spectrometry. A recent variant of the technique uses high performance liquid chromatography valves for local liquid injections of samples in the liquid carrier beam, which enables very low sample consumption and high speed sample analysis. In this review we summarize recent work to characterize the ‘desorption’ or ion isolation mechanism in this type of experiment. A decisive and interesting feature of micro liquid beam desorption mass spectrometry is that — under certain conditions — the gas-phase mass signal for a large number of small as well as supramolecular systems displays a surprisingly linear response on the solution concentration over many orders of magnitude, even for mixtures and complex body fluids. This feature and the all-liquid state nature of the technique makes this technique a solution-type spectroscopy that enables real kinetic studies involving (bio)polymers in solution without the need for internal standards. Two applications of the technique monitoring enzyme digestion of proteins and protein aggregation of an amyloid model system are highlighted, both displaying its potential for monitoring biokinetics in solution.

Modulation of effector affinity by hinge region mutations also modulates switching activity in an engineered allosteric TEM1 beta-lactamase switch

RG13 is an engineered allosteric beta-lactamase (BLA) for which maltose is a positive effector. RG13 is a hybrid protein between TEM1 BLA and maltose-binding protein (MBP). Maltose binding to MBP is known to convert the open form of the protein to the closed form through conformational changes about the hinge region. We have constructed and genetically selected several variants of RG13 modified in the hinge region of the MBP domain and explored their effect on beta-lactam hydrolysis, maltose affinity and maltose-induced switching. Hinge mutations that increased maltose affinity the most (and thus presumably close the apo-MBP domain the most) also abrogated switching the most. We provide evidence for a model of RG13 switching in which there exists a threshold conformation between the open to closed form of the MBP domain that divides states that catalyze beta-lactam hydrolysis with different relative rates of acylation and deacylation.

Mass spectrometric approaches for the investigation of dynamic processes in condensed phase

Mass spectrometry (MS) offers many advantages over other established spectroscopic techniques employed for the investigation of processes in condensed phase. The sensitivity, specificity, and speed afforded by MS-based methods enable to obtain very valuable insights into the mechanism of complex dynamic processes. Off-line methods rely on quenching to halt the progress of the reaction of interest and allow for the implementation of a broad range of analytical procedures for sample fractionation, isolation, or desalting. On the contrary, on-line methods are designed to carry out the real-time monitoring of dynamic processes through a continuous uninterrupted analysis of reaction mixtures, with the only caveat that the sample solutions be directly amenable to the available ionization technique. The utilization of rapid mixing devices in direct connection with a mass spectrometer or included in off-line schemes provides access to the initial moments of a reaction, which can offer very important information about the reaction mechanism. This report summarizes the different off- and on-line strategies developed to study chemical and biochemical reactions in solution and obtain kinetic/mechanistic information. The merits of the various experimental designs, the characteristics of the different instrumental setups, and the factors affecting time resolution are discussed with the aid of specific examples, which highlight the contributions of MS to the different facets of the investigation of dynamic processes in condensed phase.

Tazobactam Inactivation of SHV-1 and the Inhibitor-resistant Ser130 → Gly SHV-1 β-Lactamase

The increasing number of bacteria resistant to combinations of beta-lactam and beta-lactamase inhibitors is creating great difficulties in the treatment of serious hospital-acquired infections. Understanding the mechanisms and structural basis for the inactivation of these inhibitor-resistant beta-lactamases provides a rationale for the design of novel compounds. In the present work, SHV-1 and the Ser(130) --> Gly inhibitor-resistant variant of SHV-1 beta-lactamase were inactivated with tazobactam, a potent class A beta-lactamase inhibitor. Apoenzymes and inhibited beta-lactamases were analyzed by liquid chromatography-electrospray ionization mass spectrometry (LC-ESI/MS), digested with trypsin, and the products resolved using LC-ESI/MS and matrix-assisted laser desorption ionization-time of flight mass spectrometry. The mass increases observed for SHV-1 and Ser(130) --> Gly (+ Delta 88 Da and + Delta 70 Da, respectively) suggest that fragmentation of tazobactam readily occurs in the inhibitor-resistant variant to yield an inactive beta-lactamase. These two mass increments are consistent with the formation of an aldehyde (+ Delta 70 Da) and a hydrated aldehyde (+ Delta 88 Da) as stable products of inhibition. Our results reveal that the Ser --> Gly substitution at amino acid position 130 is not essential for enzyme inactivation. By examining the inhibitor-resistant Ser(130) --> Gly beta-lactamase, our data are the first to show that tazobactam undergoes fragmentation while still attached to the active site Ser(70) in this enzyme. After acylation of tazobactam by Ser(130) --> Gly, inactivation proceeds independent of any additional covalent interactions.

Quantitative matrix-assisted laser desorption/ionization mass spectrometry for the determination of enzyme activities

Quantitative matrix-assisted laser desorption/ionization (MALDI) time-of-flight (ToF) mass spectrometry (MS) was applied for the determination of concentrations of low-molecular-weight (< 400Da) substrates and products of enzyme-catalyzed reactions. Isotope-labeled and fluorinated internal standards were used for the quantification. Automated quantitative MALDI-ToF MS analysis of quenched samples allowed the direct and simultaneous observation of time-dependent decrease of substrate concentration and increase of product concentration without any need for prepurification or desalting steps. The results showed good agreement with established but more elaborate analytical methods. MALDI-ToF MS thus is an interesting alternative tool for the determination of enzyme activities. Due to automated and miniaturized measurement it is especially suitable for the screening of biocatalysts.

Ultrahigh resolution structure of a class A beta-lactamase: on the mechanism and specificity of the extended-spectrum SHV-2 enzyme

Bacterial beta-lactamases hydrolyze beta-lactam antibiotics such as penicillins and cephalosporins. The TEM-type class A beta-lactamase SHV-2 is a natural variant that exhibits activity against third-generation cephalosporins normally resistant to hydrolysis by class A enzymes. SHV-2 contains a single Gly238Ser change relative to the wild-type enzyme SHV-1. Crystallographic refinement of a model including hydrogen atoms gave R and R(free) of 12.4% and 15.0% for data to 0.91 A resolution. The hydrogen atom on the O(gamma) atom of the reactive Ser70 is clearly seen for the first time, bridging to the water molecule activated by Glu166. Though hydrogen atoms on the nearby Lys73 are not seen, this observation of the Ser70 hydrogen atom and the hydrogen bonding pattern around Lys73 indicate that Lys73 is protonated. These findings support a role for the Glu166-water couple, rather than Lys73, as the general base in the deprotonation of Ser70 in the acylation process of class A beta-lactamases. Overlay of SHV-2 with SHV-1 shows a significant 1-3 A displacement in the 238-242 beta-strand-turn segment, making the beta-lactam binding site more open to newer cephalosporins with large C7 substituents and thereby expanding the substrate spectrum of the variant enzyme. The OH group of the buried Ser238 side-chain hydrogen bonds to the main-chain CO of Asn170 on the Omega loop, that is unaltered in position relative to SHV-1. This structural role for Ser238 in protein-protein binding makes less likely its hydrogen bonding to oximino cephalosporins such as cefotaxime or ceftazidime.

Amino acid substitutions at Ambler position Gly238 in the SHV-1 beta-lactamase: exploring sequence requirements for resistance to penicillins and cephalosporins

Site saturation mutagenesis of the 238 position in the SHV beta-lactamase was performed to identify the complete sequence requirements needed for the extended spectrum beta-lactamase (ESBL) phenotype. MICs (in micrograms per milliliter) in an isogenic background, Escherichia coli DH10B, demonstrated that the Gly238Ala mutation conferred the most resistance to penicillins and cephalosporins. The absolute increase in resistance was greatest against cefotaxime for the Gly238Ala mutant (0.06 to 8 micro g/ml). Except for the strain possessing the Gly238Pro beta-lactamase, ceftazidime MICs were also elevated. None of the mutant SHV beta-lactamases were expressed in as great an amount as the wild-type beta-lactamase. Kinetic analysis of the Gly238Ala mutant revealed that penicillin and cephalosporin substrates have a lower K(m) for the enzyme because of this mutation. Ampicillin and piperacillin MICs were inversely proportional to the side chain volume of the amino acid in cases larger than Ser, suggesting that steric considerations may be a primary requirement for penicillin resistance. Secondary structural effects explain increased resistance to oxyiminocephalosporins. Based upon this study, we anticipate that additional mutations of Gly238 in the SHV beta-lactamase will continue to be discovered with an ESBL (ceftazidime or cefotaxime resistant) phenotype.

Novel ceftazidime-resistance beta-lactamases generated by a codon-based mutagenesis method and selection

Four known and nine new ceftazidime-resistance beta-lactamases were generated by a novel, contaminating codon-based mutagenesis approach. In this method, wild-type codons are spiked with a set of mutant codons during oligonucleotide synthesis, generating random combinatorial libraries of primers that contain few codon replacements per variant. Mutant codons are assembled by tandem addition of a diluted mixture of five Fmoc-dimer amidites to the growing oligo and a mixture of four DMTr-monomer amidites to generate 20 trinucleotides that encode a set of 18 amino acids. Wild-type codons are assembled with conventional chemistry and the whole process takes place in only one synthesis column, making its automation feasible. The random and binomial behavior of this approach was tested in the polylinker region of plasmid pUC19 by the synthesis of three oligonucleotide libraries mutagenized at different rates and cloned as mutagenic cassettes. Additionally, the method was biologically assessed by mutating six contiguous codons that encode amino acids 237-243 (ABL numbering) of the TEM(pUC19) beta-lactamase, which is functionally equivalent to the clinically important TEM-1 beta-lactamase. The best ceftazidime-recognizing variant was a triple mutant, R164H:E240K: R241A, displaying a 333-fold higher resistance than the wild-type enzyme.

Mutagenesis of amino acid residues in the SHV-1 beta-lactamase: the premier role of Gly238Ser in penicillin and cephalosporin resistance

The recent availability of the SHV-1 beta-lactamase crystal structure provides a framework for the understanding of the functional role of amino acid residues in this enzyme. To that end, we have constructed by site-directed mutagenesis 18 variants of the SHV beta-lactamase: an extended spectrum group: Gly238Ser, Gly238Ser-Glu240Lys, Asp104Lys-Gly238Ser, Asp104Lys-Thr235Ser-Gly238Ser, Asp179Asn, Arg164His, and Arg164Ser; an inhibitor resistant group: Arg244Ser, Met69Ile, Met69Leu, and Ser130Gly; mutants that are synergistic with those that confer resistance to oxyimino-cephalosporins: Asp104Glu, Asp104Lys, Glu240Lys, and Glu240Gln; and structurally conserved mutants: Thr235Ser, Thr235Ala and Glu166Ala. Among the extended spectrum group the combination of high-level ampicillin and cephalosporin resistance was demonstrated in the Escherichia coli DH10B strains possessing the Gly238Ser mutation: Gly238Ser, Gly238Ser-Glu240Lys, Asp104Lys-Gly238Ser, and Asp104Lys-Thr235Ser-Gly238Ser. Of the inhibitor resistant group, the Ser130Gly mutant was the most resistant to ampicillin/clavulanate. Using a polyclonal anti-SHV antibody, we assayed steady state protein expression levels of the SHV beta-lactamase variants. Mutants with the Gly238Ser substitution were among the most highly expressed. The Gly238Ser substitution resulted in an improved relative k(cat)/K(m) value for cephaloridine and oxyimino-cephalosporins compared to SHV-1 and Met69Ile. In our comparative survey, the Gly238Ser and extended spectrum beta-lactamase variants containing this substitution exhibited the greatest substrate versatility against penicillins and cephalosporins and greatest protein expression. This defines a unique role of Gly238Ser in broad-spectrum beta-lactam resistance in this family of class A beta-lactamases.

Deacylation kinetics analysis of Streptococcus pneumoniae penicillin-binding protein 2x mutants resistant to beta-lactam antibiotics using electrospray ionization- mass spectrometry

Penicillin-binding proteins (PBPs) catalyze the transpeptidase reaction involved in peptidoglycan synthesis and are covalently inhibited by the beta-lactam antibiotics. In a previous work we have focused on acylation efficiency measurements of various Streptococcus pneumoniae PBP2x* mutants to study the molecular determinants of resistance to beta-lactams. In the present paper we have developed a method to improve an accurate determination of the deacylation rate constant using electrospray ionization-mass spectrometry. This method is adaptable to the analysis of deacylation of any beta-lactam. Compared to the fluorographic technique, the ESI-MS method is insensitive to variations in the concentration of functional proteins and is therefore more reliable. We have established that the resistance of PBPs to beta-lactams is mostly due to a decrease of the acylation efficiency with only marginal effects on the deacylation rates.

The high resolution crystal structure for class A beta-lactamase PER-1 reveals the bases for its increase in breadth of activity

The treatment of infectious diseases by beta-lactam antibiotics is continuously challenged by the emergence and dissemination of new beta-lactamases. In most cases, the cephalosporinase activity of class A enzymes results from a few mutations in the TEM and SHV penicillinases. The PER-1 beta-lactamase was characterized as a class A enzyme displaying a cephalosporinase activity. This activity was, however, insensitive to the mutations of residues known to be critical for providing extended substrate profiles to TEM and SHV. The x-ray structure of the protein, solved at 1.9-A resolution, reveals that two of the most conserved features in class A beta-lactamases are not present in this enzyme: the fold of the Omega-loop and the cis conformation of the peptide bond between residues 166 and 167. The new fold of the Omega-loop and the insertion of four residues at the edge of strand S3 generate a broad cavity that may easily accommodate the bulky substituents of cephalosporin substrates. The trans conformation of the 166-167 bond is related to the presence of an aspartic acid at position 136. Selection of class A enzymes based on the occurrence of both Asp(136) and Asn(179) identifies a subgroup of enzymes with high sequence homology.

Investigation of enzyme kinetics using quench-flow techniques with MALDI-TOF mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry is combined off-line with rapid chemical quench-flow methods to investigate the pre-steady-state kinetics of a protein-tyrosine phosphatase (PTPase). PTPase kinetics are generally interrogated spectrophotometrically by the employment of an artificial, chromophoric substrate. However, that methodology places a constraint on the experiment, hampering studies of natural, biochemically relevant substrates that do not incorporate a chromophore. The mass spectrometric assay reported herein is based on the formation of a covalent phosphoenzyme intermediate during substrate turnover. This species is generated in the reaction regardless of the substrate studied and has a molecular weight 80 Da greater than that of the native enzyme. By following the appearance of this intermediate in a time-resolved manner, we can successfully measure pre-steady-state kinetics, regardless of the incorporation of a chromophore. The strengths of the mass-spectrometric assay are its uniform response to all substrates, simple and direct detection of covalent enzyme-substrate intermediates, and facile identification of enzyme heterogeneities that may affect enzymatic activity.

Characterization of TEM-56, a novel beta-lactamase produced by a Klebsiella pneumoniae clinical isolate

TEM-56 produced by a Klebsiella pneumoniae clinical isolate is a novel beta-lactamase of isoelectric point 6.4 that confers a moderate resistance level to expanded-spectrum cephalosporins. The amino acid sequence deduced from the corresponding bla gene showed two amino acid replacements with respect to the TEM-2 sequence: Glu-104 to Lys and His-153 to Arg. This enzyme showed catalytic properties close to those of TEM-18. Thus, TEM-56 appears as a new TEM mutant, an intermediary between TEM-18 and the extended-spectrum beta-lactamase TEM-21.

Penicillin-binding protein 2a from methicillin-resistant Staphylococcus aureus: kinetic characterization of its interactions with beta-lactams using electrospray mass spectrometry

Penicillin-binding protein 2a (PBP2a) is the primary beta-lactam resistance determinant of methicillin-resistant Staphylococcus aureus (MRSA). MecA, the gene coding for PBP2a, was cloned with the membrane-anchoring region at the N-terminus deleted. The truncated protein (PBP2a) was overexpressed in Escherichia coli mostly in the soluble form accounting for approximately 25% of soluble cell protein and was purified to homogeneity. The purified protein was shown to covalently bind beta-lactams in an 1:1 ratio as determined by electrospray mass spectrometry. A novel method based on HPLC-elctrospray mass spectrometry has been developed to quantitatively determine the formation of the covalent adducts or acyl-PBP2a complexes. By using this method, combined with kinetic techniques including quench flow, we have extensively characterized the interactions between PBP2a and three beta-lactams and determined related kinetic parameters for the first time. The apparent first-order rate constants (ka) of PBP2a acylation by benzylpenicillin showed a hyperbolic dependence on the concentration of benzylpenicillin. This is consistent with the mechanism that the binding of the penicillin to PBP2a consists of reversible formation of a Michaelis complex followed by formation of the penicilloyl-PBP2a adduct, and allowed the determination of the individual kinetic parameters for these two steps, the dissociation constant Kd of 13.3 mM and the first-order rate constant k2 of 0.22 s-1. From these values, the second-order rate constant k2/Kd, the value reflecting the overall binding efficiency of a beta-lactam, of 16.5 M-1 s-1 was obtained. The fairly high Kd value indicates that benzylpenicillin fits rather poorly into the protein active site. Similar studies on the interaction between PBP2a and methicillin revealed k2 of 0.0083 s-1 and Kd of 16.9 mM, resulting in an even smaller k2/Kd value of 0.49 M-1 s-1. The rate constants k3 for deacylation of the acyl-PBP2a complexes, the third step in the interactions, were measured to be <1.5 x 10(-)5 s-1. These results indicate that the resistance of PBP2a to penicillin inactivation is mainly due to the extremely low penicillin acylating rate in addition to the low association affinity, but not to a fast rate of deacylation. Acylation of PBP2a by a high-affinity cephalosporin, Compound 1, also followed a saturation curve of ka versus the compound concentration, from which k2 = 0.39 s-1, Kd = 0.22 mM, and k2/Kd = 1750 M-1 s-1 were obtained. The 100-fold increase in the k2/Kd value as compared with that of benzylpenicillin is mostly attributable to the decreased (60-fold) Kd, indicating that the cephalosporin fits much better to the binding pocket of the protein.

The effect of high-frequency random mutagenesis on in vitro protein evolution: a study on TEM-1 beta-lactamase

For a number of years a major limitation in genetic analysis of protein function has been the inability to introduce multiple substitutions at distant sites that would enable the selection of clusters of mutations required for improved or novel biological functions. In order to achieve this, we have recently developed a novel mutagenesis procedure in which the triphosphate derivatives of a pyrimidine (6-(2-deoxy-beta-d-ribofuranosyl)-3, 4-dihydro-8H-pyrimido-[4,5-c][1,2]oxazin-7-one; dP) and a purine (8-oxo-2'-deoxyguanosine; 8-oxodG) nucleoside analogue are employed in DNA synthesis reactions in vitro. The procedure allows control of the mutational load and can yield frequencies of amino acid residue substitutions at least one order of magnitude greater than those previously achieved. Here we report the results of an experiment in which we have hypermutated the bacterial enzyme TEM-1 beta-lactamase and selected small pools (<1.5x10(5)) of clones for enzymatic activity against the beta-lactam antibiotic cefotaxime. The experiment resulted in the isolation of a number of TEM-1 mutants with greatly improved activity against cefotaxime. Among these, clone 3D.5 (E104K:M182T:G238S) exhibited a minimum inhibitory concentration for cefotaxime 20,000-fold higher than wild-type TEM-1 and a catalytic efficiency (kcat/Km) 2383 times higher than the wild-type enzyme. Thus, small pools of hypermutated sequences enabled the selection of one of the most active extended beta-lactamases described so far. These results argue against the accepted view that multiple rounds of low-rate mutagenesis and stepwise selection are essential for in vitro protein evolution and extend the scope of directed molecular evolution to proteins for which no genetic selection is available.

The role of residue 238 of TEM-1 beta-lactamase in the hydrolysis of extended-spectrum antibiotics

beta-Lactamases inactivate beta-lactam antibiotics by catalyzing the hydrolysis of the amide bond in the beta-lactam ring. The plasmid-encoded class A TEM-1 beta-lactamase is a commonly encountered beta-lactamase. It is able to inactivate penicillins and cephalosporins but not extended-spectrum antibiotics. However, TEM-1-derived natural variants containing the G238S amino acid substitution display increased hydrolysis of extended-spectrum antibiotics. Two models have been proposed to explain the role of the G238S substitution in hydrolysis of extended-spectrum antibiotics. The first proposes a direct hydrogen bond of the Ser238 side chain to the oxime group of extended-spectrum antibiotics. The second proposes that steric conflict with surrounding residues, due to increased side chain volume, leads to a more accessible active site pocket. To assess the validity of each model, TEM-1 mutants with amino acids substitutions of Ala, Ser, Cys, Thr, Asn, and Val have been constructed. Kinetic analysis of these enzymes with penicillins and cephalosporins suggests that a hydrogen bond is necessary but not sufficient to achieve the hydrolytic activity of the G238S enzyme for the extended-spectrum antibiotics cefotaxime and ceftazidime. In addition, it appears that the new hydrogen bond interaction is to a site on the enzyme rather than directly to the extended-spectrum antibiotic. The data indicate that, for the G238S substitution, a combination of an optimal side chain volume and hydrogen bonding potential results in the most versatile and advantageous antibiotic hydrolytic spectrum for bacterial resistance to extended-spectrum antibiotics.

Kinetic analysis of an inhibitor-resistant variant of the OHIO-1 beta-lactamase, an SHV-family class A enzyme

The Met69-->Ile mutant of the OHIO-1 beta-lactamase, an SHV-family enzyme, is resistant to inactivation by beta-lactamase inhibitors. Analysis of purified Met69-->Ile enzyme reveals that its isoelectric point (pI 7.0) and CD spectrum are identical with those of the OHIO-1 enzyme. Levels of beta-lactamase expression in Escherichia coli as determined by immunoblotting are similar for OHIO-1 and Met69-->Ile beta-lactamase. The kinetic constants of the Met69-->Ile enzyme compared with OHIO-1 are smaller for benzylpenicillin (Km = 6 microM compared with 17 microM; kcat = 234 s-1 compared with 345 s-1 respectively) and carbenicillin (Km = 3 microM compared with 17 microM; kcat = 131 s-1 compared with 320 s-1 respectively). For the cephalosporins cephaloridine and 7-(thienyl- 2-acetamido)-3-[2-(4-N,N- dimethylaminophenylazo)pyridinium-methyl]-3-cephem-4-carboxylic acid (PADAC), a similar pattern is also seen (Km=38 microM compared with 96 microM and 6 microM compared with 75 microM respectively; kcat = 235 s-1 compared with 1023 s-1 and 9 s-1 compared with 50 s-1 respectively). Consistent with minimum inhibitory concentrations that show resistance to beta-lactam beta-lactamase inhibitors, the apparent Ki values, turnover numbers and partition ratios (kcat/kinact) for the mechanism-based inactivators clavulanate, sulbactam and tazobactam are increased. The inactivation rate constants (kinact) are decreased. The difference in activation energy, a measurement of altered affinity for the wild-type and mutant enzymes leading to acylation of the active site, reveals small energy differences of less than 8.4 kJ/mol. In total, these results suggest that the Met-->Ile substitution at position 69 in the OHIO-1 beta-lactamase alters the active site, primarily affecting the interactions with beta-lactamase inhibitors.

Role of residues 104, 164, 166, 238 and 240 in the substrate profile of PER-1 beta-lactamase hydrolysing third-generation cephalosporins

The class A beta-lactamase PER-1, which displays 26% identity with the TEM-type extended-spectrum beta-lactamases (ESBLs), catalyses the hydrolysis of oxyimino-beta-lactams such as cefotaxime (CTX), ceftazidime (CAZ) and aztreonam (AZT). Molecular modelling was used to identify in PER-1 the amino acid residues corresponding to those found at positions 104, 164, 238 and 240 in the TEM-type ESBLs, which are critical for hydrolysis of oxyimino-beta-lactams. The function of these residues in PER-1 was assessed by site-directed mutagenesis. In this enzyme, residue 104 could be either a glutamine, an asparagine or a threonine. The Gln-->Gly mutation did not significantly affect the catalytic efficiency, while Asn-->Gly and Thr-->Glu resulted in a marked decrease in catalytic activity, probably due to the alteration of a hydrogen bond network connecting the putative Asn-104 residue to Asn-132 and Glu-166. Replacement of Ala-164 by Arg in PER-1 resulted in a mutant with no detectable activity, thus suggesting that Ala-164 is important for catalysis and stability of PER-1. Conversely, Ser-238-->Gly and Gly-240-->Glu had little effect on kcat and Km values. Finally, the replacement of the catalytic residue Glu-166 by an alanine resulted in a complete loss of activity for CTX and a marked decrease of kcat for CAZ and AZT. These results suggest that Glu-166 is an important residue in PER-1. However, residues other than Glu-166 could contribute in maintaining residual activity towards oxyimino-beta-lactams in the Ala-166 mutant.

Catalytic properties of class A beta-lactamases: efficiency and diversity

beta-Lactamases are the main cause of bacterial resistance to penicillins, cephalosporins and related beta-lactam compounds. These enzymes inactivate the antibiotics by hydrolysing the amide bond of the beta-lactam ring. Class A beta-lactamases are the most widespread enzymes and are responsible for numerous failures in the treatment of infectious diseases. The introduction of new beta-lactam compounds, which are meant to be 'beta-lactamase-stable' or beta-lactamase inhibitors, is thus continuously challenged either by point mutations in the ubiquitous TEM and SHV plasmid-borne beta-lactamase genes or by the acquisition of new genes coding for beta-lactamases with different catalytic properties. On the basis of the X-ray crystallography structures of several class A beta-lactamases, including that of the clinically relevant TEM-1 enzyme, it has become possible to analyse how particular structural changes in the enzyme structures might modify their catalytic properties. However, despite the many available kinetic, structural and mutagenesis data, the factors explaining the diversity of the specificity profiles of class A beta-lactamases and their amazing catalytic efficiency have not been thoroughly elucidated. The detailed understanding of these phenomena constitutes the cornerstone for the design of future generations of antibiotics.

A disulfide bridge near the active site of carbapenem-hydrolyzing class A beta-lactamases might explain their unusual substrate profile

Bacterial resistance to beta-lactam antibiotics, a clinically worrying and recurrent problem, is often due to the production of beta-lactamases, enzymes that efficiently hydrolyze the amide bond of the beta-lactam nucleus. Imipenem and other carbapenems escape the activity of most active site serine beta-lactamases and have therefore become very popular drugs for antibacterial chemotherapy in the hospital environment. Their usefulness is, however, threatened by the appearance of new beta-lactamases that efficiently hydrolyze them. This study is focused on the structure and properties of two recently described class A carbapenemases, produced by Serratia marcescens and Enterobacter cloacae strains and leads to a better understanding of the specificity of beta-lactamases. In turn, this will contribute to the design of better antibacterial drugs. Three-dimensional models of the two class A carbapenemases were constructed by homology modeling. They suggested the presence, near the active site of the enzymes, of a disulfide bridge (C69-C238) whose existence was experimentally confirmed. Kinetic parameters were measured with the purified Sme-1 carbapenemase, and an attempt was made to explain its specific substrate profile by analyzing the structures of minimized Henri-Michaelis complexes and comparing them to those obtained for the "classical" TEM-1 beta-lactamase. The peculiar substrate profile of the carbapenemases appears to be strongly correlated with the presence of the disulfide bridge between C69 and C238.

Selection and characterization of amino acid substitutions at residues 237-240 of TEM-1 beta-lactamase with altered substrate specificity for aztreonam and ceftazidime

Recently, natural variants of TEM-1 beta-lactamase with amino acid substitutions at residues 237-240 have been identified that have increased hydrolytic activity for extended-spectrum antibiotics such as ceftazidime. To identify the sequence requirements in this region for a given antibiotic, a random library was constructed that contained all possible amino acid combinations for the 3-residue region 237-240 (ABL numbering system) of TEM-1 beta-lactamase. An antibiotic disc diffusion method was used to select mutants with wild-type level activity or greater for the extended-spectrum cephalosporin ceftazidime and the monobactam aztreonam. Mutants that were selected for optimal ceftazidime hydrolysis contained a conserved Ala at position 237, a Ser for Gly substitution at position 238, and a Lys for Glu at position 240. Mutants selected for aztreonam hydrolysis exhibited a Gly for Ala substitution at position 237, a Ser for Gly substitution at position 238, and a Lys/Arg for Glu at position 240. The role of the A237G substitution in differentiating between ceftazidime and aztreonam was further investigated by kinetic analysis of the A237G, E240K, G238S:E240K, and A237G:G238S:E240K enzymes. The A237G single mutant and the G238S:E240K double mutant exhibited increases in catalytic efficiency for both ceftazidime and aztreonam. However, the triple mutant A237G:G238S:E240K, displayed a 12-fold decrease in catalytic efficiency for ceftazidime but a 3-fold increase for aztreonam relative to the G238S:E240K double mutant. Thus, the A237G substitution increases ceftazidime hydrolysis when present alone but antagonizes ceftazidime hydrolysis when it is combined with the G238S:E240K substitutions. In contrast, the A237G substitution acts additively with the G238S:E240K substitutions to increase aztreonam hydrolysis.

Structural basis of extended spectrum TEM beta-lactamases. Crystallographic, kinetic, and mass spectrometric investigations of enzyme mutants

The E166Y and the E166Y/R164S TEM-1 beta-lactamase mutant enzymes display extended spectrum substrate specificities. Electrospray mass spectrometry demonstrates that, with penicillin G as substrate, the rate-limiting step in catalysis is the hydrolysis of the E166Y acyl-enzyme complex. Comparison of the 1.8-A resolution x-ray structures of the wild-type and of the E166Y mutant enzymes shows that the binding of cephalosporin substrates is improved, in the mutant enzyme, by the enlargement of the substrate binding site. This enlargement is due to the rigid body displacement of 60 residues driven by the movement of the omega-loop. These structural observations strongly suggest that the link between the position of the omega-loop and that of helix H5, plays a central role in the structural events leading to extended spectrum TEM-related enzymes. The increased omega-loop flexibility caused by the R164S mutation, which is found in several natural mutant TEM enzymes, may lead to similar structural effects. Comparisons of the kinetic data of the E166Y, E166Y/R164S, and R164S mutant enzymes supports this hypothesis.